Tektronix TDS 220 Oscope not found by MAX using USB GPIB HS

Max 5.4 will not identify my Tk TDS 220 for any GPIB address I set it to.
THANKS for any help!
I've already tried everything from these links:
http://www.ni.com/download/ni-488.2-3.1.1/3786/en/
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=289
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=047216EC20B66FABE0440003BA7CCD...

Hi VISluth!
Is your instrument set to allow external control? You can find information about this in the instrument manual.
Also, while looking into the TDS 220, I found the following webpage which could suggest that you have defective hardware:
http://www.tek.com/service/safety/tds210-tds220
You could also check for IP between the instrument and your computer.
Applications Engineer
National Instruments

Similar Messages

Getting error while using CAN api's. Says channel not found in MAX.

Hi,
I am using NI-CAN series2, can card. The same is not connected to my system. Hence i have used the virtual channel 256. Here i am reading the DBC file and providing an option to the user to select a set of messages to transmitt\receive. But i am getting an error saying
"Error -1074388479 occurred at CAN Get Channel Data Type.vi
Possible reason(s):
NI-CAN: (Hex 0xBFF62201) Channel not found in MAX or the CAN database file. Solutions: Check for proper spelling using MAX; For Get/Set Property, ensure that the channel name exists in the task."
Please help.
Regards,
Yogesh

Hi Marshall,
Thanx for the reply and spending time for the same. I tried the example which u had mentioned. This example is working with 256 virtual channel. But my code is no executing and giving he same problem even after loading the DBC file into max(Same loaded im my code). Always load the dbc file in max and then only i should run the code, is it so? But this can not happen, since the user may not hav max. I hav attached the code. Pls verify it, and give me the feedback.
Waiting for the reply,
Yogesh
GET
Larsen & Toubro
India
Attachments:
CanMsgFrame.vi ‏68 KB

CRM 7.0 upgrade ( i5/OS PASE program not found or in use)

Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
   STARTUP    SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
        SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
   Message . . . . :   i5/OS PASE program not found or in use. Path name is
       /usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.

Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
   STARTUP    SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
        SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
   Message . . . . :   i5/OS PASE program not found or in use. Path name is
       /usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

It appears that you may not have a properly installed OS X system.
You must be connected to the Internet to reinstall OS X.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Disk Utility,” and then click Continue.
Select your startup disk from the list on the left, and then Repair Disk.
After disk is repaired, select Reinstall OS X, then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

That does not involve iPhoto for the Mac in any way - try the iPad forum
I will request your post be moved
LN

PCI-7344 not found in MAX 3.1.1 after installing NI-Motion 7.0

Hi,
I updated my PCI-7344 + LabView 7.0 system with the newest NI-Motion 7.0. After the update the card was not anymore detected in MAX. There was a "broken" device PCI-7344 under NI Motion Devices, which status said something like "This device has been removed or could not be detected" and the Reset command said something like "Could not communicate with the device. Power cycle the computer..". I removed the device from the "Devices and interfaces" list and since that, MAX hasn't had a clue about the card. I've tried the "Create new.." function, but it doesn't show any NI Motion Devices or PCI-7344 anywhere else. I've also tried the Tools/Install legacy driver support, but MAX only notifies that the updates are OK. I've also tried removing the physical device, starting the computer and MAX, reinstalling the device and restarting MAX, but nothing changes. The device is recognised by BIOS as "Unknown device"; in Windows 2000 Pro, the device is well recognised as National Instruments PCI-7344.
One thing that could cause the problem is that I also have LabView 6i installed on the system, although I'm not currently using it for any purpose. Anyway, this seems to prevent the MAX from detecting the correct updates needed when using the "National Instruments Product Updates.." from Tools menu. Perhaps I need some driver software to correct this problem?
I also tried to uninstall the NI-Motion 7.0 and to install the NI-Motion 6.1.5, but after this, the MAX did not work correctly. For example, none of the branches in the configuration tree would expand and the MAX locked up when trying to use the Create New.. / NI Motion Device. Is there a way to uninstall the NI-Motion 7.0 and to replace it with NI-Motion 6.1.5 without removing all NI software from the system?
Before the update, with NI-Motion 6.1.5, the PCI-7344 card was correctly found in MAX and well usable in LabView 7.0.

Jouni,
A valid serial number is any number > 0. If you have multiple boards in you system, they must each have a unique serial number. This would be the case for any board coming out of manufacturing. The board Jochen had probably came from R&D and was a prototype board.
Your problem with downgrading from NI-Motion 7.0 to NI-Motion 6.1.5 was most likely due to the data stored in the MAX database. When you uninstall NI-Motion, the data in the MAX database remains. The NI-Motion 6.1.5 driver would not have been able to read the data correctly. The easiest way to "clear" this database is to delete the c:\Program Files\National Instruments\MAX\data folder. The only other way is to uninstall MAX, which requires that you uninstall everything. WARNING, Deleting the MAX data folder will delete all MAX settings and set them back to defaults for all NI hardware (uninstalling everything has this same affect, by the way). Downgrading is never as clean as upgrading.
The firmware on a Motion board can always be downgraded by forcing the download of firmware files. To do this, select the board in MAX under Devices and Interfaces. Click on the Firmware tab at the bottom on the window. Highlight "PCI-73XX Firmware" by clicking on it once. Right click on one of the items in the "Firmware name" column to the right. Select "Download All Files".
I do not have a good explaination for why NI-Motion 7.0 did not recognize your board. Do you have a second board you can try in the system? If not, could you ask your local sales representative if they have one you borrow for a quick test? Since the board is recognized by Windows 2000 Device Manager, I don't think there is an issue with the board, but it doesn't hurt verify this.
My best guess is that there was a confict during the installation process and your system did not get all of the required files. Though we do significant installer testing, there are rare occasions when a system is in such a state that the installation process does not function as expected. It is my experience that these rare instances do not occur on clean machines, but on machines that have had multiple products installed and uninstalled. If you do get a chance to try NI-Motion 7.0 again you may want to use these parameters to get the installer to create a log of the installation: "c:\setup.exe l*v c:\log.txt". This assumes that the setup.exe is in the c:\ directory. Go to start>>run and type this in without the quotes. The log file will be named log.txt in the c:\ directory.
Finally, you can technically use NI-Motion 7.0 in LabVIEW 6. You just need to copy the C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\Motion folder to the vi.lib folder of LabVIEW 6. Though this is not officially supported, there is no reason it shouldn't work.
Regards,

Firewire camera not found in MAX on Windows 7

Hi all,
Used to run a firewire camera on Windows XP with no problems. Using version 8.6 and do not want to change this if at all possible. New lab PC runs windows 7 and firewire camera not found in NI MAX. The drivers associated with the camera are NI-IMAQdx IIDC...
NI-MAX does not even show a NI-IMAQdx camera and there is no way to add such a camera. The same issue arises for an AVT Guppy camera suggesting it is not camera dependent.
Has anyone any suggestions as how to rectify this. We have full development software v8.6 with all the appropriate drivers and modules required as it previously ran problem free on an XP machine.
Cheers,
leeser

Hi Leeser,
Which version of the driver did you previously have installed under Windows XP? It would be worth trying to re-install the latest version of the NI-IMAQdx driver. You will be able to install the Vision Acquisition Software 08.2010, which works with LabVIEW 8.5 and later (and installs NI-IMAQdx 3.7).
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Interface Not Found Error when Using Snap Example for Firewire (IEEE 1394)

I just recently installed a SONY XCD-SX910 to interface with Labview 8.2. When choosing the driver, only the Legacy driver would work for the Firewire(R) (or IEEE 1394) installation. After installing the driver, I successfully acquired images from the MAX inteface. However, when attempting to trace through the 1394 Legacy Snap Example from the IEEE 1394 installation document, I am receiving the error "Interface Not Found". I have tried a few iterations attempting to name the camera such as "cam0" (the name assigned to the camera in MAX) and "cam0 : SONY XCD-SX910". However, the error persists.
What should I name my camera for it to find the interface? Is there another underlying problem that is not obvious?
Solved!
Go to Solution.

Is the Legacy Snap example you are referring to the one that is seen here: http://zone.ni.com/devzone/cda/tut/p/id/2977? Can you post screenshots from both Measurement & Automation Explorer and the VI you are trying to use? Also, can you verify in Measurement & Automation explorer that you are using the 1394 driver? You can do this by right clicking your camer and the selecting driver and choosing the appropriate one. Some more information on all that you are seeing would help in order to troubleshoot this.
-Zach
Certified LabVIEW Developer

Getting 'File not found' error while using server object model code

Hi,
I am using server object model code to pull list data in a console application. My machine has standalone installation of SP 2010. I am getting error 'File Not Found', however the same operation is working fine with client object model code.
Code I am using:
string strURL=http://servername/sites/sitename;
SPSite siteObj=new SPSite (strURL); //getting error here.
I have already checked the below,
1. Framework being used is 3.5.
2. I have proper access to site.
3. Running visual studio as admin.
Any help is much appreciated.
thanks
Tarique
thanks and regards Tarique Aslam

Hello Tarique ,
Couple of pints need to check:
1. User running the console application needs to have at least read permission to the SharePoint databases
2. Set application by changing the "Platform target:" option on the "Build" to "Any CPU"
Also refer this similar thread:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2a419663-c6bc-4f6f-841b-75aeb9dd053d/spsite-file-not-found
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Class not found in applet using 2 jar files

I have an applet which has been working for years as a stand alone or connecting directly to a derby database on my home server. I have just changed it to connect to MySQL on my ISP server via AJAX and PHP.
I am now getting a class not found error in my browser, probably because I'm stuffing up the class path.
The HTML I am using to call the applet is:
<applet code="AMJApp.class"
codebase="http://www.interactived.com/JMTalpha"
archive="AMJ014.jar,plugin.jar"
width="500"height="500"
MAYSCRIPT style="border-width:0;"
name="jsap" id="jsap"></applet>The AMJ014.jar contains the applet and supporting class files.
The error message is strange to me because it refers to a class I noticed on another web page but which has nothing to do with my applet. Anyway, the message in full is:
load: class NervousText.class not found.
java.lang.ClassNotFoundException: NervousText.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.lang.ClassNotFoundException: NervousText.class
java.lang.UnsupportedClassVersionError: AMJApp : Unsupported major.minor version 51.0
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClassCond(Unknown Source)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.defineClassHelper(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.access$100(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.lang.UnsupportedClassVersionError: AMJApp : Unsupported major.minor version 51.0

Thanks again.
The page code is:
<html>
<head>
<title>Applet to JavaScript to PHP</title>
</head>
<body>
<script type="text/javascript">
function updateWebPage(myArg)
document.getElementById("txt1").innerHTML=myArg;
if (myArg=="")
document.getElementById("cbxItem").innerHTML="";
return;
if (window.XMLHttpRequest)
{// code for IE7+, Firefox, Chrome, Opera, Safari
xmlhttp=new XMLHttpRequest();
else
{// code for IE6, IE5
xmlhttp=new ActiveXObject("Microsoft.XMLHTTP");
xmlhttp.onreadystatechange=function()
if (xmlhttp.readyState==4 && xmlhttp.status==200)
    document.getElementById("cbxItem").innerHTML=xmlhttp.responseText;
xmlhttp.open("GET","putitem.php?id="+myArg,true);
xmlhttp.send();
</script>
<form>
<table border=1 align='center' cellpadding=0 cellspacing=0 >
<tr><td style='text-align:center; background-color:#C0C0C0'>Compiled Java Applet</td></tr>
<tr><td><applet code="AMJApp.class" codebase="http://www.interactived.com/JMTalpha" archive="AMJ014.jar" width="500"height="500" MAYSCRIPT style="border-width:0;" name="jsap" id="jsap"></applet> </td></tr>
<tr><td style='text-align:center; background-color:#C0C0C0'>HTML Textbox filled by JavaScript</td></tr>
<tr><td><textarea style='width:500px; height:50px' name='txt1' id='txt1'>Query goes here</textarea></td></tr>
<tr><td style='text-align:center; background-color:#C0C0C0'>HTML diagnostic messages rendered by PHP script</td></tr>
<tr><td><div id="cbxItem">PHP info will populate this space</div></td></tr>
</table>
</form>
</body>
</html>The URL of the problem page is:
http://www.interactived.com/JMTalpha/AMJTest.htm
The code in the page is based on the following test page, which works:
http://www.interactived.com/test5Applet.htm
And the Applet, before I made any changes can be seen at this address:
http://www.interactived.com/jartest0906.htm
Thanks again for you interest.
Edited by: 886473 on 21-Sep-2011 00:47

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

'Field Catalog not Found' - ALV Grid using CustomContainer+Fcat

The Following piece of code throws 'Field Catalgo not found'
Please give me necessary changes in the code.
Thanks & Regards
Harsha Ch.
*& Report ZCHK_ALV_CUSCONT1                                           *
REPORT zchk_alv_cuscont1                       .
DATA itab LIKE STANDARD TABLE OF mara WITH HEADER LINE.
SELECT matnr meins mbrsh FROM mara INTO CORRESPONDING FIELDS OF TABLE itab UP TO 10 ROWS.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA fcat1 TYPE lvc_t_fcat WITH HEADER LINE.
DATA fcat TYPE STANDARD TABLE OF lvc_s_fcat.
DATA: c1 TYPE REF TO cl_gui_custom_container.
DATA: a1 TYPE REF TO cl_gui_alv_grid.
CREATE OBJECT c1 EXPORTING container_name = 'CC_ALV'.
CREATE OBJECT a1 EXPORTING i_parent = c1.
PERFORM populate_fcat.
PERFORM generate_grid.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Form POPULATE_FCAT
      text
--> p1        text
<-- p2        text
FORM populate_fcat .
fcat1-reptext = 'MATNR'.
fcat1-fieldname = 'MATNR'.
fcat1-col_pos = '1'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MEINS'.
fcat1-fieldname = 'MEINS'.
fcat1-col_pos = '2'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MBRSH'.
fcat1-fieldname = 'MBRSH'.
fcat1-col_pos = '3'.
APPEND fcat1.
CLEAR fcat1.
ENDFORM.                    " POPULATE_FCAT
*&      Form GENERATE_GRID
      text
--> p1        text
<-- p2        text
FORM generate_grid .
CALL METHOD a1->set_table_for_first_display
EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
     I_STRUCTURE_NAME              = 'MARA'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
   IT_TOOLBAR_EXCLUDING          =
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
CHANGING
    it_outtab                     = itab[]
   IT_FIELDCATALOG               = fcat
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
   INVALID_PARAMETER_COMBINATION = 1
   PROGRAM_ERROR                 = 2
   TOO_MANY_LINES                = 3
   others                        = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GENERATE_GRID

Hi
This works fine:
*& Report ZCHK_ALV_CUSCONT1 *
DATA ITAB LIKE STANDARD TABLE OF MARA WITH HEADER LINE.
DATA FCAT1 TYPE LVC_T_FCAT WITH HEADER LINE.
DATA FCAT TYPE STANDARD TABLE OF LVC_S_FCAT.
DATA: C1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: A1 TYPE REF TO CL_GUI_ALV_GRID.
START-OF-SELECTION.
SELECT MATNR MEINS MBRSH FROM MARA INTO CORRESPONDING FIELDS OF TABLE
ITAB UP TO 10 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* TEXT
MODULE STATUS_0100 OUTPUT.
* PERFORM POPULATE_FCAT.
PERFORM GENERATE_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*       FORM POPULATE_FCAT                                            *
FORM POPULATE_FCAT .
FCAT1-REPTEXT = 'MATNR'.
FCAT1-FIELDNAME = 'MATNR'.
FCAT1-COL_POS = '1'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MEINS'.
FCAT1-FIELDNAME = 'MEINS'.
FCAT1-COL_POS = '2'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MBRSH'.
FCAT1-FIELDNAME = 'MBRSH'.
FCAT1-COL_POS = '3'.
APPEND FCAT1.
CLEAR FCAT1.
ENDFORM. " POPULATE_FCAT
*       FORM GENERATE_GRID                                            *
FORM GENERATE_GRID .
CHECK C1 IS INITIAL.
CREATE OBJECT C1 EXPORTING CONTAINER_NAME = 'CC_ALV'.
CREATE OBJECT A1 EXPORTING I_PARENT = C1.
CALL METHOD A1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME = 'MARA'
    CHANGING
      IT_OUTTAB = ITAB[].
ENDFORM. " GENERATE_GRID
Max

Required section not found in the inf (usb bluetooth)

After thousands of problems installing the usb bluetooth on windows xp sp2, i found a new one: the new hardware wizard will not install the device because of this "the required section not found in the INF", i belive somethig is corrupted in the registry, i found similar problems with scaners or usb joysticks searching with google.
did someone have the same problem? please help!!!

have you tried the lastest driver?

ResourceAdapter not found during deployment using WL 7.0 SP2

Hi,
          Am using WL 7.0 SP2 on Win2k w/ JDK 1.4.
          Am using the non-managed mode (wherein the admin server is also the managed-server).
          Am trying to deploy my RA. On uploading the RAR using
          the admin console, I get the following error (from the server.log):
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer Initiating a deployment task with id 8 for application bs-ra
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer preparing application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer prepared application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Management Configuration changes for domain saved to the repository.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer activating application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Connector Initializing connection pool for resource adapter BookStore-
          Resource Adapter_eis/BSResourceAdapter.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error Deployer Unexpected error was encountered during the deployment proce
          ss.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error Deployer The Slave Deployer failed to complete the deployment task wi
          th id 8 for the application bs-ra.
          java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter
               at java.lang.Class.getMethods0(Native Method)
               at java.lang.Class.getDeclaredMethods(Class.java:1034)
               at java.beans.Introspector$1.run(Introspector.java:847)
               at java.security.AccessController.doPrivileged(Native Method)
               at java.beans.Introspector.getPublicDeclaredMethods(Introspector.java:845)
               at java.beans.Introspector.getTargetEventInfo(Introspector.java:551)
               at java.beans.Introspector.getBeanInfo(Introspector.java:289)
               at java.beans.Introspector.getBeanInfo(Introspector.java:76)
               at weblogic.connector.common.internal.ConnectionPool.<init>(ConnectionPool.java:402)
               at weblogic.connector.common.internal.ConnectionPoolManager.addManagedConnectionFactory(ConnectionPoolManager.java:64)
               at weblogic.connector.deploy.ConnectorDeployer.activate(ConnectorDeployer.java:315)
               at weblogic.connector.deploy.ConnectorModule.activate(ConnectorModule.java:221)
               at weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1662)
               at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1087)
               at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1074)
               at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1110)
               at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
               at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          --------------- nested within: ------------------
          weblogic.management.ManagementException: 149233 - with nested exception:
          [java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter]
               at weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(SlaveDeployer.java:834)
               at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1180)
               at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
               at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Warning Deployer Failures detected initiating weblogic.management.ManagementE
          xception: 149233 - with nested exception:
          [java.lang.NoClassDefFoundError: javax/resource/spi/Resource
                                                                                              Adapter] task for application Activate application bs-ra on
          vspl-dev-server
          Jun 9, 2003 5:32:32 PM EDT vspl-dev-server Info Management Configuration changes for domain saved to the repository.
          Jun 9, 2003 5:32:36 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:39 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:47 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:48 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          There are two things I observer here.
          1. The ResourceAdapter class does not seem to be found by Weblogic. It's part of the javax.resource.spi package.
          I checked the weblogic.jar archive in the WL-HOME/server/lib folder. It does not seem to have the class. Why ?
          2. It complains about the ManagedConnectionFactory not being found. Am assuming that if the RA was deployed
          in the first place, I would not have seen this error (coz, the ManagedConnectionFactory would have been
          deployed in the previous step). Right ?
          I did observe that WL 7.0 supports only JCA 1.0. In JCA 1.0's (public) API, there is no mention of the
          javax.resource.spi.ResourceAdapter class, though the spec talks about it. ??
          Note: I had designed and implemented my RA as per JCA 1.5 (but nothing 1.5-specific, I guess).
          Any ideas ?
          thanks,
          raghu


I figured it out. Darn simple.
          My ManagedConnectionFactory implementation referenced ResourceAdapter as
          it has to implement the ManagedConnnectionFactory interface of JCA 1.5.
          In JCA 1.0 (which is supported by WL 7.0 & 8.1), the ResourceAdapater
          is undefined. Hence, the classloading problem.
          Sorry for any confusion.
          raghu
          raghu h wrote:
          > Hi,
          >
          > Am using WL 7.0 SP2 on Win2k w/ JDK 1.4. Am using the non-managed mode
          > (wherein the admin server is also the managed-server).
          >
          > Am trying to deploy my RA. On uploading the RAR using
          > the admin console, I get the following error (from the server.log):
          >
          >
          >
          > -----------------------------------------------------------------------------------------------------------------
          >
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info
          > Deployer Initiating a deployment task with id 8 for
          > application bs-ra
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info
          > Deployer preparing application bs-ra on
          > vspl-dev-server Jun 9, 2003 5:32:31 PM EDT
          > vspl-dev-server Info Deployer prepared application
          > bs-ra on vspl-dev-server Jun 9, 2003 5:32:31 PM EDT
          > vspl-dev-server Info Management Configuration
          > changes for domain saved to the repository. Jun 9, 2003 5:32:31 PM
          > EDT vspl-dev-server Info Deployer activating
          > application bs-ra on vspl-dev-server Jun 9, 2003 5:32:31 PM
          > EDT vspl-dev-server Info Connector
          > Initializing connection pool for resource adapter BookStore-
          >
          > Resource Adapter_eis/BSResourceAdapter.
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error
          > Deployer Unexpected error was encountered during the
          > deployment proce
          >
          > ss.
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error
          > Deployer The Slave Deployer failed to complete the deployment
          > task wi
          >
          > th id 8 for the application bs-ra.
          >
          > java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter
          > at java.lang.Class.getMethods0(Native Method)
          > at java.lang.Class.getDeclaredMethods(Class.java:1034)
          > at java.beans.Introspector$1.run(Introspector.java:847)
          > at java.security.AccessController.doPrivileged(Native Method)
          > at
          > java.beans.Introspector.getPublicDeclaredMethods(Introspector.java:845)
          > at java.beans.Introspector.getTargetEventInfo(Introspector.java:551)
          > at java.beans.Introspector.getBeanInfo(Introspector.java:289)
          > at java.beans.Introspector.getBeanInfo(Introspector.java:76)
          > at
          > weblogic.connector.common.internal.ConnectionPool.<init>(ConnectionPool.java:402)
          >
          > at
          > weblogic.connector.common.internal.ConnectionPoolManager.addManagedConnectionFactory(ConnectionPoolManager.java:64)
          >
          > at
          > weblogic.connector.deploy.ConnectorDeployer.activate(ConnectorDeployer.java:315)
          >
          > at
          > weblogic.connector.deploy.ConnectorModule.activate(ConnectorModule.java:221)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1662)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1087)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1074)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1110)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
          >
          > at
          > weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
          >
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          > --------------- nested within: ------------------
          > weblogic.management.ManagementException: 149233 - with nested exception:
          > [java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter]
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(SlaveDeployer.java:834)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1180)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
          >
          > at
          > weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
          >
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Warning
          > Deployer Failures detected initiating
          > weblogic.management.ManagementE
          >
          > xception: 149233 - with nested exception:
          >
          > [java.lang.NoClassDefFoundError: javax/resource/spi/Resource
          >
          > Adapter] task for application Activate application bs-ra on
          >
          > vspl-dev-server
          >
          > Jun 9, 2003 5:32:32 PM EDT vspl-dev-server Info
          > Management Configuration changes for domain saved to the
          > repository. Jun 9, 2003 5:32:36 PM EDT vspl-dev-server
          > Error Connector ManagedConnectionFactory not found for
          > jndiName eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:39 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:47 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:48 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > -------------------------------------------------------------------------------------------------------------
          >
          >
          >
          > There are two things I observer here. 1. The ResourceAdapter class does
          > not seem to be found by Weblogic. It's part of the javax.resource.spi
          > package.
          > I checked the weblogic.jar archive in the WL-HOME/server/lib folder. It
          > does not seem to have the class. Why ?
          > 2. It complains about the ManagedConnectionFactory not being found. Am
          > assuming that if the RA was deployed
          > in the first place, I would not have seen this error (coz, the
          > ManagedConnectionFactory would have been
          > deployed in the previous step). Right ?
          >
          > I did observe that WL 7.0 supports only JCA 1.0. In JCA 1.0's (public)
          > API, there is no mention of the
          > javax.resource.spi.ResourceAdapter class, though the spec talks about
          > it. ??
          >
          >
          > Note: I had designed and implemented my RA as per JCA 1.5 (but nothing
          > 1.5-specific, I guess).
          >
          > Any ideas ?
          >
          > thanks,
          > raghu
          >
          >
          >
          >

Class Not Found Error when using Junit

Hi
I am using Junit4.1, Eclipse 3.2.1
I am getting this error
Class not found
start.test.TestPdfGenerationService
java.lang.ClassNotFoundException: start.test.TestPdfGenerationService
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.loadClass(RemoteTestRunner.java:683)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.loadClasses(RemoteTestRunner.java:425)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:445)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
what would the possible reason for that and how can i come out of it..

the reason: the class is not in the classpath. Or the project's runtime classpath.
Make sure it's added to the build path and if necessary exported all the way to your JUnit project.

Tektronix TDS 220 Oscope not found by MAX using USB GPIB HS

Similar Messages

Maybe you are looking for