Télécharger film sur clé USB ou ordi sur ipad

Bonjour,
Je suis une addict d'Apple depuis longtemps mais je n'arrive jamais à télécharger un film (sur clé USB ou ordi) sur l'Ipad.
Pourriez-vous m'expliquer clairement :-) la "procédure" ?
Merci beaucoup.
JulyK

Il semble possible de utilser MPEG Streamclip - voir:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
L'application est gratuite.
(.mod est actuellemnt equivalent à .mpg)
Geoff.

Similar Messages

  • Pourquoi quand je veux telecharger mes ebooks achetés et téléchargés sur IPad il est impossible de les mettre aussi sur mon Pc. La phrase : telecharger par un autre acheteur. Ce n'est pas un autre, puisque j'ai le même identifiant

    Pourquoi quand je veux telecharger mes ebooks achetés et téléchargés sur IPad il est impossible de les mettre aussi sur mon Pc. La phrase : telecharger par un autre acheteur. Ce n'est pas un autre, puisque j'ai le même identifiant ?
    ce serait bien aussi de pouvoir aller sur Adobe en français, tout le monde ne parle pas anglais.

    Hello,
    Thank you for your answer.
    If "Recheck" or "Check" means "verify" ("vérifier"), I dont't think that I have any problem of that sort.
    It's not a question of junk folder, I yet verified that.
    I'll try to do again the account creation because I must go away during a week : perhaps it's a question of delay of arriving of the verification message...

  • Location films sur iPad 2 mais ne peut pas les visionner

    Je viens de louer deux films sur iTunes mais lorsque je veux les visionner je ne peux pas
    Je vois bien l affiche du film mais on dirait qu il est toujours en chargement pourtant il n est plussent le téléchargement achat iTunes
    Qui peut m'aider svp?

    Bonjour,
    Toute la discussion ainsi que la solution est disponible sur cette page : https://supportforums.cisco.com/discussion/12471331/3750x-switch-failed-start-new-image.
    Les 3750x possédant une carte-mère de révision C0 ne peuvent pas mettre d'image plus récente que l'image 15.0 (1) SE3. Tous les images de version supérieur seront considérées comme non bootable.
    Cordialement,

  • Bonjour, j'ai téléchargé un film en location sur ipad en HD au lieu du SD. C'est une erreur, j'ai mis le téléchargement en pause. Est-il de l'annuler sachant qu'il est actuellement suspendu?

    Bonjour, j'ai lancé le téléchargement d'un film en location sur ipad en HD au lieu de la SD. C'est une erreur, j'ai mis le téléchargement en pause. Est-il possible de l'annuler sachant qu'il est actuellement en stand-by? Merci...

    I think that you have to get iTunes Store Support involved since there is no way, to pause the download and then change your selection. Contact iTunes Support and explain it to them and see if they can help you.
    Go to Purchases, Billing and Redemption and start there.
    https://getsupport.apple.com/Issues.action

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • TS2634 i have a ipad gen1 refurbished the wall usb charger keeps saying charging is not supported with this accesory and has taken 24 hrs to charge half the battery and this is a factory charger that uses the usb port whats wrong here help please

    i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
    the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to date

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

    Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?  Or do I need to purchase one of those cigarette lighter charging devices?  Thanks!

    You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
    I think your  options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger  in like you would at home.
    Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
    The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

  • Ipad Wont charge vía wall charger only by Mac USB?

    Okay so i hace tris ipad 3 since August 2012. The problem is since two days ago that I updated to iOS 6.1.2. I have a Mac so I charge it there but now I can't for some reason charge it via the wall charger provided. It starts charging but the after a few minutes of charging the charging icon becomes the charged icon even though its like 17%. If I charge it by my Mac it works just fine. Any help would be appreciated thank you in advanced . I also re restore just in case but with no successs

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    Or - Recalibrate the battery. See link below.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Charger seems loose but USB cable not?? :S

    Alright so I've  had a 9300 curve since august and love the phone. However recently I've been noticing a problem with the charger in which I've had to wiggle it around to make the phone charge. However I tried it with the USB cablbe before and the USB slotted in fine and did not seem loose at all. I guess it's the charger that's broke? Perhaps the cable is loose or torn inside or something?
    Should I just get a new charger?

    From what you've told us, yes.  Unless you're leaving out some information, it would appear that your charger is defective.  With the wall charger being the preferred method of charging, make sure you get your charger replaced.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

    Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

  • How Do We Charge N8 with its USB Cable?

    Hello Everyone,
    I tried to charge my N8 with USB cable but it didn't charge. I connected its USB Cable to my phone and laptop, but it didn't start charging my N8. Do I have to do something else?
    If you know anything about it, please share the information here.
    Thank you..
    ToLGa

    You can't but they may be a way around it. Not all usb ports support charging. Try the different ports on your laptop and see if any of them don't charge. 

  • I just bought my I pad 2 and im trying to charge it via a USB cord connected to my Dell.  It's not working please help

    I just bought an I pad 2 and im trying to charge it via a USB cord connected to my Dell.  It's not working please help

    Not all USB ports provide enough power to charge the iPad. It may charge very slowly while the screen is off. Charge it using the included charger and you should be fine.

  • HT4060 iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    I'm sorry but this is too funny to pass up. 

  • I am trying to copy and paste a 734mb film on to an 8GB usb but it keeps saying "It cannot copy as there isn't enough space". How is this possible? And how do I put the film on the usb?

    I am trying to copy and paste a 734mb film on to an 8GB usb but it keeps saying "It cannot copy as there isn't enough space". How is this possible? And how do I put the film on the usb?

    Look at the USB stick in Disk Utility and check whether it may be partitioned or have other software on it taking up space.

  • Fter installing iOS7.1 I cannot charge my 4S anymore by original charger, not by PC USB with original apple cable. Thanks Apple!

    fter installing iOS7.1 I cannot charge my 4S anymore by original charger, not by PC USB with original apple cable. Thanks Apple!

    After installing iOS7.1 I cannot charge my 4S anymore by original charger, not by PC USB with original apple cable. Thanks Apple!

Maybe you are looking for

  • PO Approval Workflow cusomization

    Hi All, I need to submit a custom report when a PO or release is approved. This we are thinking to submit in workflow. We need to submit a custom PO report with parameters po number from and to, release number from and to for which the WF is getting

  • Delaying when switching between apple mail and safari

    just on mavericks. it more or less looks and feel ok but... when I switch between apple mail and safari, everything "freezes" for some seconds (up to 30). anyone similar experiences? what could be the cause of that? its really disturbing.

  • Clip Attributes

    Hello All, I've always gotten a great response by you knowledgeable folks. Here's another question. When logging footage I usually write some log notes in the log notes section. By chance I happened to throw away the logged footage in the logged bin

  • ISE advanced eval license alerts after full base install.

    Has anyone had an issue with the advanced eval license triggering the below alerts after a full base license has been installed and the advanced eval license has expired? How can I keep the license expiration warnings and avoid receiving warnings for

  • Printing "for" loop interations

    Currently I'm stuck. I can't get more than the first interation of the two loops to print out on the same line. I can get the code to print all the interations if I run the loops seperately. But I'm trying to get the output of the two loops to print