Telepresence client 4.8, No incoming video / Not receiving audio on a Mac - Windows is OK

Hi, I'm using the Jabber Telepresence client v4.8.8.18390 on a Mac - Yosemite 10.10.2
It used to work fine, but something has changed and now I can't receive video or audio. The call seems to initiate, local camera is in use, but then get the messages "no incoming video" and "not receiving audio", as shown in the attachment.
It works fine on my windows client, v4.8, so I know my account is fine, and i'm using the same settings to connect to the server - so this seems to be a local issue.
If i downgrade to v 4.4 then I can receive audio, but still no video, and 4.6 or 4.8 are both broken in the same way.
I think this may be something along the lines of conflicting / bad codecs installed on the mac - but can't find a way of tracking that down.
Any help would be hugely appreciated.
Thanks
Sam

Does your camera/audio/mic work with other software such as Skype or YouTube, etc? Are you sure this is a Jabber issue versus a PC problem?
Have you tried the newer 4.7 client?
I see Windows 8 is supported;
http://www.cisco.com/c/en/us/td/docs/telepresence/endpoint/Jabber_Video/4_7/CJAB_BK_C7A5C618_00_cisco-jabber-video-for-telepresence/CJAB_BK_C7A5C618_00_cisco-jabber-video-for-telepresence_chapter_01001.html

Similar Messages

Still not receiving iMessages on my Mac

I am Still not receiving iMessages on my Mac, even after the Moutain Lion 10.8.2 update and iOS6 on my iPhone 4S. Does anyone know how to solve this?
I was under the impression that after the 10.8.2 update and iOS6 and having all of the correct preferences checked new iMessages from someone else would also show up on my Mac and iPad. Can someone please help and advise?
Thanks!
Brandon
Columbus, OH

William,
Thanks so much for your reply and attention to this matter! I actually figured out last night that I did not have the right boxes checked within the Preferences of iMessage on my Mac. PROBLEM SOLVED!!!
Now if you could just help me solve my last issue! See below...
https://discussions.apple.com/message/19743817#19743817
Thanks in advance!
Brandon

TS3899 Since I updated my iphone, I am not receiving email on my .mac account. What's wrong?

Since I updated my iphone to I0S6, I am not receiving email on my .mac account. What's wrong?

Tim, I was speaking generally. Obviously the iOS upgrade didn't remove the ability to charge on ALL 3rd party devices, else my iH9 wouldn't charge it either.
What I just can't understand is how an old iHome model works just fine with a new iPhone, yet a new iHome model will not. If anything, I would think it would be the other way around.
Anyway, I emailed iHome explaining my situation and I asked if they had planned on releasing a firmware update to fix the problem. I got the typical generic response about unplugging the iHome & removing the batteries for an hour then trying again. And if that doesn't work, send it in for repair in which I would need to pay for the shipping.
If I decide to go that route, I think it's just going to be a waste of time as I would get the iHome back "repaired" and it would have the exact same problem. But I guess I'll never know until I try.
I remember reading on these forums about several others having the same problem. So what are the odds that the iHomes these other people got who are experiencing the same problem are problematic as well? Unless the "repair" iHome is referring to is a firmware update, I don't really buy into this.

Not receiving iMessage on my Mac

Why am I not reeiving iMessages on my Mac or display any of my chat history?

An alternative.
Is anyone sending iMessages to your on the ID you use on your Mac ?
The Messages app can do the old style iChat IMs as well as iMessages.
The best start for those is to use the same Apple ID on the iPhone, iPad, Touch as well as Messages on your Mac.
Some people say they sync better if the iPhone is Turned Off then rebooted to cut the link to the iMessage Server then re-establish it on the restart.
Others say it seems to do better if the iPhone has all messages cleared before trying to sync.
It is reported that full on iPhone Number syncing will come with iOS 6 as has already been said
10:45 PM Tuesday; July 31, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

OS X 10.4.11 will send but not receive faxes on Power Mac G4 MDD

OS X 10.4.11 will send but not receive faxes on my Power Mac G4 MDD. Perhaps I should remove the relevant .plist preference file(s). But which one(s) is it /are they? Or is there something else I should do?

Thank you for your reply, BDAqua. I have set the fax feature to answer after 3 rings, but the phone rings only once when someone is trying to send a fax. The phone icon in the menu bar changes to "ringing ..." but nothing more happens. The phone line on which I receive faxes is dedicated to that use. I phoned in to its number earlier today from another phone. I heard it ring once and then it went to the busy signal. I then disconnected the fax phone line from its wall jack, connected a phone to the jack, and phoned in to it. The phone now rang and rang as it should. So this confirms the assumption that the fault is in the computer, presumably in the Print & Fax software. I should also mention that I don't find com.apple.print.FaxPrefs.plist in /Library/Preferences.

One Yahoo! mail account does not receive email sent from .mac

OK, this is an odd problem, and any help would be appreciated.
My girlfriend's Yahoo! mail account does not receive email sent from my .mac address. If I send email from my Gmail or Yahoo! accounts she receives the message. No one else has informed me that they haven't received email from the .mac address. Additionally, the .mac account is in her address book.
Anyway, has anyone seen a similar pattern with Yahoo! or any other email provider?
Thanks.
- Jennings

Thanks for the reply . . . and yes, the recipient's email provider likely holds the answer.
However, I was hoping someone here might have had a similar experience and could answer as the email provider is Yahoo, and they are slow in responding to help requests . . . for a period I hosted a personal, paid website through Yahoo Domains and help tickets lingered for several days on multiple occasions (this being the reason the site is no longer hosted by Yahoo). I also doubt Yahoo will expend too much energy resolving a problem for a free email account.
Anyway, I posted in the Yahoo mail forums, and hopefully something will come-up . . . .

My Icloud account is not receiving mail on my mac laptop.

Hey Mac wizards,
I am trying desperately to receive mail on my mac laptop...it just randomly stopped working.
I have looked online, changed configuration but just can't seem to do it.
Can anyone help me out please?

Mavericks 10.9
Mail: Version 7.0 (1822)
gmail IMAP
Inbox on my Mail Desktop does NOT match what iphone, ipad, or web mail shows. Because it is NOT getting mail or syncing. Still doesn't when I hit the get mail button, get new mail, get all new mail etc.
Connection doctor says gmail IMAP is green.
Troubleshooting already performed: Restarted mail. Rebooted computer. Deleted gmail account and re-added it ... TWICE. Downloaded and installed new mail app (which was acually the same one I already had). Spent an hour on the phone with Mac support.
How can you act like this isn't a WELL known problem:
http://osxdaily.com/2013/11/07/mail-update-os-x-mavericks-fix-gmail-bugs/
http://www.digitaltrends.com/computing/how-to-fix-mac-os-x-mavericks-problems/
http://www.zdnet.com/concerns-rise-on-os-x-mavericks-gmail-compatibility-7000022 481/
http://www.macworld.com/article/2061254/hallelujah-apple-issues-update-for-mail- in-mavericks.html
http://www.imore.com/did-mavericks-mail-update-fix-your-gmail-woes-poll
http://www.macrumors.com/2013/11/07/apple-releases-mail-update-for-mavericks-to- address-gmail-issues/
Most of these talk about a fix. I updated by Mail and it is NOT fixed.

Webcam/incoming video not working with flash 11

I use a chat room which uses adobe flash for webcams to video conference. I've used adobe flash for webcam purposes for years without an issue but all of a sudden my outgoing video/audio doesn't work and incoming audio/video is very choppy. My webcam freeze frames on the first image it sees, and incoming audio/video just skips like a broken CD. I've tried uninstalling/reinstalling flash, uninstalling reinstall chrome, different browers...but the problem only exists in adobe flash. My webcam works fine in non-flash programs (i.e. Skype), as well as incoming audio/video. I believe this problem occured directly after the latest flash update. What can I do?
Specs:
2005 Dell Inspiron
OS: Windows XP
32 Bit
Browser: Chrome (but tried also firefox, IE and still didnt work)
Webcam: MS Lifecam VX-3000

Here are the steps required to install the previous version
1. Uninstall Flash Player using the stand alone uninstaller using these instructions
2. Download the previous version of Flash Player here: Flash Player 11.1.102.63
Note: This downloads a .zip file that contains all of the different releases of Flash Player for that version (ie. Windows, Mac, etc.)
3. Extract the contents of this zip file
4. Depending on your operating system and browser, go into either the 64 or 32 bit folders (do not use the debug folder) then double click the following filename to start the installation:
Internet Explorer for Windows 7 64-bit: flashplayer11_1r102_63_winax_64bit.exe
Other browsers for Windows 7 64-bit: flashplayer11_1r102_63_win_64bit.exe
Internet Explorer for all Windows 32-bit systems: flashplayer11_1r102_63_win_32bit.exe
Other browsers for all Windows 32-bit systems: flashplayer11_1r102_63_winax_32bit.exe
Mac OSX: flashplayer11_1r102_64_mac.dmg

Improving Ichat Video? incoming Video not clear (CHUNCKY)

I've used the Ichat and found the video to video chat poor, but I Think its Just me. Looking further into these discussion groups I have learned how to improve if not fix it. Quicktime streaming seems to controll Ichat (?) so I turned that up.
I tested up upload and download speed
upload 10355kbs
download 364kbs
The download seems to be a good speed(?) I'm not sure on the upload speed?
Is that I good speed to give an identical Imac good CLEAR video. If not How can I improve the upload speed.
(Imac 2.16 GHz - Core 2 DUo - 1 GB 667 MHZ
Thanks for any imput

Hi Jon,
That upload is fast enough to host according to the specs as you are probably rated faster in the service you actually buy.
The download is fine. You could set the Quicktime Streaming to 1Mbps or 1.5Mbps and see if there is any difference. It used to be a little more crucial in iChat 2 to match your download speed.
If you shut down iChat and paste this bold text in to Terminal
/Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
Then hit enter this will start up iChat and create a log.
The first thing it does is check the hardware rules for your processor and tell you the Max frames a sec.
(You can quit iChat in the normal way and then quit Terminal)
You may not always reach this figure as shown ion the Connection Doctor (from iChat's Video menu) as the "Local" .
Much of the picture quality you see, depends on your Buddy's ability.
9:52 PM Sunday; February 11, 2007

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Video not importing audio

I am trying to post some mov files onto my friends website.
Someone said to use Flash. I followed the tutes and when I get to
the import video step in Flash, I am using "embed" instead of link.
I get an error that says "Audio can not be imported". What do I
do?

http://www.adobe.com/cfusion/webforums/forum/index.cfm?forumid=15
How about asking Flash conversion questions in the Flash
forum?

How do i get my videos to show as a video, not an audio.

i downloaded a few tv shows and music videos and they don't show the video or the tv show. it acts like its a song, or an audio. not a video.
HELP!
how do i get my videos to show.?

See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

Purchased Videos not received in iphone

Purchased Bugs bunny season 1, Which contains 10 episodes. Received 3. On account shows 10. Please help

well, Mike, It's skipping all my videos as well! This is just a 'broke' feature right now. I've used computers for video production since '84, and Apple products since '87. For an app from Apple to be so hard to figure out is unlikely.
It's just not working right now. I'll give it some slack because it is so brand new, but part of my rationale for purchasing the iPhone was the video capability, and the large 8 gig capacity for the videos I produce.
In fact, where can you find ANY functionality with regard to DELETING anything from the SYNC MOVIES list on the iTunes iPhone movies page...
Dang.

HTML5 Audio/Video Not working at all on new Windows 7 install

I'm the developer of jPlayer, a plugin for jQuery and my recent testing a new laptop on Windows 7 Ultimate, Safari 5.0.1 found that the audio and video HTML5 elements do not work at all.
http://www.happyworm.com/jquery/jplayer/
http://www.happyworm.com/jquery/jplayer/HTML5.Audio.Support/
My plugin checks for the mediaElement.canPlayType() method and if it exists it then checks the suitable MIME types for compatibility. But that is just the fine details. Basically, the Safari 5.0.1 browser installed on Windows 7, without any of the audio or video support.
Testing on other sites around the web also showed that this install did not include those parts of the HTML5 spec. No idea why. I installed it off the apple/safari site and it is fully updated. Chrome 5, Firefox 3.6, Opera 10.6 all worked fine.
Example of other sites used to check:
http://www.html5rocks.com/tutorials/video/basics/
By comparison, my old Windows XP machine works fine with Safari 5.0.1 and has had a version of safari installed on the machine since Safari 3.
Side note, the Mac versions of all the browsers work fine. Also the iPad emulator shows everything works.
Any ideas what went wrong with my install on Windows 7?
Best regards,
Mark P

I am looking at this issue too. I installed Safari 5.0.1 on Windows XP on two different machines. In these cases I found that the .canPlayType() always returns undefined on an audio element. So http://www.happyworm.com/jquery/jplayer/HTML5.Audio.Support/ showed that no support for HTML5 audio was found. ( http://twitpic.com/2f16nh )
Both installations were clean installs and it was also the first time Safari had been installed on both XP installations.
I don't see these issues on OSX 10.6.4 and others have reported that it worked under Windows 7. My guess then is that is something to do with new installs and not OS.
Mark B

Youtube videos not loading and playing on Mac Mini

Safari can't stream videos from Youtube. The videos may start to load and play for a few seconds to a minute, but I can't watch a single video all the way through without it continually pausing for minutes at a time, and then eventually just pausing indefinitely while the video tries to load. I updated my Adobe Flashplayer plug-in (from Adobe's website), I reset Safari and emptied all of the internet info like cookies and things. The mac is only a couple weeks old, so there's not a gazillion things added to Safari or anything like that, as far as extensions and plug-ins and whatnot. I only have the "adblocker" extension, because it was recommended in a thread like this one, and had helped others with the youtube problem. I'm not terribly computer savvy. Please help!

From the menu bar, select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.
If you use a FireWire audio interface, disconnect it and test again.

Telepresence client 4.8, No incoming video / Not receiving audio on a Mac - Windows is OK

Similar Messages

Maybe you are looking for