Telesales access for temps and contingent workers

Hi,
We have a requirement to provide telesales access to temps and contractors who are defined in HR as Contingent Worker employees.
I know this is not a standard functionality., but is there any other way/workaround to provide access to temps?
Any pointers on the same would be highly appreciated.
Thanks,
Dinakar.

Hi Johnson
Are u using NA Payroll or Global Payroll module.
Regards
Preethi

Similar Messages

  • My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

  • How do I configure my application to provide access for mobile and web brow

    Hi everyone.
    I have one application and I need to provide access for mobiles and desktop browsers, and I don't know how do I configure my application to do this.
    Let me explain:
    In my jDeveloper I have One application and 3 projects:
    -Mobile (here is my mobile application)
    -Model (here is my model)
    -ViewController (here is my Web Browser application)
    In Mobile I have
    JavaEE Web Application name: mobile-Mobile-webapp
    JavaEE Web Context Root: mobile
    ViewController I have
    JavaEE Web Application name: mobile-ViewController-webapp
    JavaEE Web Context Root: myapplication
    When I run some page of ViewController I have this URL "http://localhost:7101/myapplication/index.jspx".
    When I run some page of ViewController I have this URL "http://localhost:7101/mobile/index.jspx".
    My problem is that, I want to have Just one landing URL like that "http://localhost:7101/myapplication/index.jspx" and when I get this URL by Desktop Browser my ViewController is showed, and when i get by Mobile the Mobile project is showed.
    Someone knows how do it?
    Thanks....

    Yes, I can, thanks for response.
    But, don't have some configuration in Oracle for this? I've been thinking do this with java or JavaScript, but I was looking something more beautiful for this.
    Java or JavaScript is the only way?

  • BI+   Reporting on access for Users and Groups

    BI+ 9.2.0.2, is there a way to report on the permissions associated to a report or a folder? If so, how do you do it? Would like to get all the access permissions for all the folders and all the reports on one report, if possible. <BR><BR>Would be nice if you could do this in Shared Services, like Planning does. <BR><BR>Thank you! <BR>

    Now that you mention it, when I provisioned all users at the orgn scope, I had visibility issues of team workspaces created inside the organization also.
    I am not going to do anything with organizations until things can be accurately accessed and viewed across organizations, seeing as I must go live NOW, I am also going to have to find a way to "move" Personal Workspaces into the desired organizational scope post go-live. I opened an SR about this previously and was told there is no way to do it, I did a rip-and-rebuild on my LDAP'ed users with an updated scope on my Directory Profile.
    I imagine multiple enterprises and multiple organizations and cross visiblity controls for GAL and entities via the various interfaces is going to have to be in place before large complex organizations can adopt beehive, I can't imagine having ALL your users in one container!

  • How to show iMovies in iPhoto (for iTunes to access for AppleTv and mobile)

    I have read a few posts on this but cannot find a definitive answer...
    If you import movies into iPhoto, iMovies can access them. But if you import into iMovies, it seems iPhoto cannot access them, which means iTunes cannot access them to stream to AppleTV or sync with my iPhone and iPad, as iTunes does not see iMovies.
    Because I have a DV Camcorder I have to import my home movies to iMovie which gives me this above problem in that I cannot see them in iPhoto/iTunes/AppleTv.
    So am I right in thinking the best way to have all applications see my movies is to export them from iMovie into iPhoto as follows:-
    1) Rip to iMovies from the Camcorder
    2) Find the files in Finder
    3) Import into iPhoto
    4) Delete the originals from iMovie
    Then I should be able to see the newly imported files in iPhoto in iMovie AND iTunes??
    I cant find or think of an alternate solution.
    Thanks

    I've decided to give the following a go...
    Basically I originally wanted to use iPhoto for movies and photos so I have them all in one place and because I think Albums, Smartfolders etc. are great. Movies go hand in had with photos of the same event. But I also wanted them in iTunes to sync. with iPad, iPhone and play via Apple TV.
    The file sizes from camcorder videos got me thinking I don't really want the massive files in iPhoto/iTunes/AppleTV etc. So have now decided to use iMovie as the library for the original large files, from which I can edit and make some compilations etc. then export those new movies of lower filesize (mp4?) into iPhoto for use with iTunes, Apple TV, iPhone and iPad.
    I decided that when I finish importing I may look at putting the iMovie library with original DVs onto an external drive (due to filesize, if this is possible). So when I want to use iMovie to import and edit and make movies I will plug in the external hard drive where they all are, do my stuff, then can unplug and put away. That way I do not need to delete the originals due to filesize (I did not want to have to re-import from the camcorder again in future so do want them stored somewhere).
    It also means I dont have every single video I shot in iPhoto, iTunes etc., not all of them are good.
    Then my main computer with the iPhoto library has all my created and edited and new format movies to store for use with iTunes, Apple TV etc.
    So I think this sounds like a good plan for me.
    iMovie -> Original movie library manager (external drive due to filesize)
    iPhoto -> Photos and edited movies library manager (Mac drive for AirPlay and mobile sync)

  • Hello,i have changed the access of library and system files in macintosh HD through get info option.i changed the access to write only access for library and system files to no access for everyone.then mac stopped working..nothing opening now.

    hello
    i have changed the access of library to WRITE ONLY and also i changed the access of system files to NO ACCESS FOR ANYONE in macintosh HD.then,suddenly it stopped working.i tried it shut down.then it didnot shut down.then i pressed ctrl+command+power button.then it was shut down.
    NOW, nothing is opening in macbook pro.it is opening and only apple logo is shown.what should i do now.i knew nothing in mac.please help me.operating system is 10.7

    hello CT,
    it showed
    permissions differ on library: should be drwxr-xr-r
    repaired "library"
    permissions differ on system: sholud be should be drwxr-xr-r;they are d-wx-----------
    repaired "systems"
    like this many steps occured.
    then next step is permissions repair complete.

  • How do i transfer itunesto a 2tb external hard drive and still have daily access for sync and apple tv?

    my I tunes i taking up ver half my space on my older macbook.  I have started using an external hard drive for photos and stuff but woudl love to free up more space.  I cant perform sertian updates as they are available.  Cant add more movies and tv shows so would love to know if and how this is possible to do, while still being able to access it for sync with 2 iphones, ipod and ipad and use with apple tv.
    Any assitance would be great.
    thanks

    Thanks I will try this and let ya know how it turns out.  Once it is moved via steps you listed do I need to delete it all off my Mac or does this move it completely?
    Thanks again

  • Exchange 2010 .Disable external access for Autodiscovery and RPC

    Hi Team,
    Once i publish my Owa page in exchange 2010 .Automatically i was able to access.
    https://domainname.com/autodicovery
    https://domainname.com/rpc
    https://domainname.com/owa/oma
    I need to block access from external world to these websites.Pls help

    Hi,
    Before we go further, I'd like to confirm if you want to block external Outlook access. If yes, we can disable Outlook Anywhere since external Outlook access use Outlook Anywhere to connect to server.
    Additionally, there are three methods for external Outlook users to connect to Autodiscover service. If we don't add public A record and SRV record, Autodiscover cannot work.
    And we can separate web sites for internal access and external access and don't add Autodiscover and RPC virtual directories in the external access web site. and here is an article about OWA virtual directory, and you can refer to the article for Autodiscover
    and RPC:
    http://blogs.technet.com/b/messaging_with_communications/archive/2011/05/02/how-to-block-owa-for-external-users.aspx
    Thanks,
    Angela Shi
    TechNet Community Support

  • Capacity evaluation for internal and external workers in one work center

    Hi ,
    Normally in all Industries you have internal manpower to execute work. Say I have a work center named "Mechanical" , I will have 5 people working 8 Hrs for 5 days in a week. We usually configure this in capacity tab of work center for capacity category "002-Labour".  In scheduling tab we configure sceduling data for a capacity category "002-labour"
    In many industries , depending on load, many time, external labours are hired to give assistance to internal workers. Technically it is like adding one more capacity category "PER-Person" and adding number external labours there and in scheduling tab adding required configuration for "PER" capacity category
    Total capacity for any given day would be available capacity in capacity category -002 + available capacity in PER capacity category.
    However in scheduling Tab , scheduling basis can be either 002/PER.
    How can we add more scheduling basis to refer to more than one capacity category ?
    Any other alternative to above problem statement?

    let us say, you have a work "Pump repair" which is done partly by internal workers say 2 people and 1 external labour. Let us assume the number of people in 002-labour is 2 (internal ) and  capacity in capacity category (PER) which is external work center is 3 (Total 5 ).
    Now if I I leave scheduling basis as blank, then system will calculate scheduling based on 002 capacity category as it is "Major" . But I want system to consider both 002 and +PER .
    You are suggesting two line items "Pump Repair internal" and give 2 numbers and duration as 8  control key PM01 . Create another operation "Pump repair External" use control key PM02 (where in scheduling is enabled)  where 1 number - 8 Hrs duration is maintained with another work center.
    If I maintain 2 different work centers and two different operations, this will work. But for customer this is just one work and capacity evaluation should be based on capacity category 002 and PER .
    How to solve this by maintaining one work center , two capacity categories in same work center  and maintaining one control key PM01 in operation?

  • Auditing and restricting 3rd party vendor access for compliance and sec purposes

    There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
    For anyone that's curious, what we are currently doing is just policy based. No...
    This topic first appeared in the Spiceworks Community

    There are two products out there that I am looking into for managing 3rd party vendor access to our systems. The first one is Bomgar's Embassy. I'm not too sure if it's a separate product from their standard remote support products or just an added feature. Also I am aware that Bomgar's licensing can be pretty pricey.The second product I was looking into is called SecureLink. It seems to have all of the bases covered in terms of auditing and restricting but there are not a whole lot of reviews of the product or live demonstrations of it. Even the video on their site shows XP screens so I'm fearful that the product development has been halted.If anyone has any experience with these products or others I would be very interested to hear what you have to say.
    For anyone that's curious, what we are currently doing is just policy based. No...
    This topic first appeared in the Spiceworks Community

  • Decoupled Infotype - Correct Buffer Access for PA30 and from BAPI?

    Weu2019ve created a custom decoupled infotype and read/delete/update/insert work just fine with PA30, but the same methods supplied with the corresponding Check class do not work when called from a program.  The Check class inherits from CL_HRPA_INFOTYPE_NNNN.  After going through some documentation, we made the Check class inherit from CL_HRPA_INFTY_NNNN and now the modify method works if we redefine the modify method to use the direct buffer update methods from IF_HRPA_MASTERDATA_BUFFER (implementation in CL_HRPA_MASTERDATA_BUFFER). But then, PA30 stops working and throws an exception - u201CInfotype does not support legacy accessu201D.
    Anyone know why the SAP generated infotype check class methods not work when called as it is? There are no error messages thrown and no messages returned in the message handler too. Just that the database does not get updated. The Read method always works for all cases though. Help documentation is clear about the risks and differences between the two buffer access methods but issues exist when using PA30 and when trying to access/update the buffer from a program or BAPI.

    Since you are adopting an approach per [SAP help|http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm], I guess only SAP can help. May be you should try your luck by opening a Customer message (i.e. if you haven't already done so).
    ~Suresh

  • Net access for wii and iPhone via iMac - help!

    If I've got it right my fairly new imac flat panel has a built-in Airport networking card that actually allows me to connect my wii and iphone to the internet without a separate router. I actually managed to set up the network with the wii but later lost the connection. I just got an iphone so I've been trying to get the wifi access going going again using the standard mac os utilities but I just can't figure it out and I can't find any useful guidance. Suggestions? Thanks.
    Message was edited by: slackeresq

    Hello and Welcome to Apple Discussions. 
    Thanks for posting back.
    Does the Wii only need Port 80 to be open on the Firewall or does it use other ports also?
    Thanks
    mrtotes

  • Ver 8.8 Restricted access for BP and activities

    Currently, I am not aware of a way to restrict access to certain BP accounts, including the related activities for a BP. For example, our bank, HR consultants, etc. where I would like to limit the access to these BP accounts and related attachments to certain users, such as our management group.
    Primary importance would be to limit access to related activities where sensitive information may be stored in the form of emails, attachments, etc.
    Our previous CRM allowed us to flag BP accounts as restricted and set up permissions to authorized users.
    Is anyone aware of a way to limit access to these activities?
    If not, this is a great enhancement for future releases.

    Current system design has only set up confidential GL Account but not for BP. You probably need to post it on the R&D forum here:
    /community [original link is broken]
    Thanks,
    Gordon

  • How to block internet access for RDS and RemoteApp users?

    Hi everyone,
    This question might partially belong to security forum but I think anyone using RDS services comes across this. I would like to TOTALLY block all internet access including "updates" to any software, windows updates, anti-virus updates, TCP, UDP,
    or ANY other protocol out of the server. I would like to only allow traffic both ways for established traffic (e.g. accessing the remote apps).
    How can I achieve this without involving a third party firewall software?
    Thanks

    In our visitor center, we setup a computer with fake proxy server and add our website to the exception so that the visitors access our website only and no other website. If this RDS is for internal use only, you may disable default gateway. This link may
    give you more options.
    how to
    restrict internet access
    How to restrict Internet Access. You may have many options to disable a user or
      computer to access the Internet. Some options can be adopted for many users
    www.chicagotech.net/Internet/restrictie0.htm
    Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.howtonetworking.com

  • Change public share access to read only for public and full access to selected users

    Hi, new to the community just purchased a recertified WDMyCloud 2TB after my 2 years old MyBookLive 2TB HD died due to accidental power cable unplugging. I've got everything setup including MiniDLNA by following instructions on this forum and everything is working  exactly as I want it to except public share. I want public share to be set to read only access for public and full access to certain users (just myself at the moment) and having a "upload" folder within this share with full public access to everything in this folder would be a bonus. I tried login in to ftp with root user and removing write permission for public but that blocks me out as well. I'm sure it's possible by doing some majic on SSH but I wouldn't have a clue so hoping someone here would be able to help me out.

    Mr_Khan wrote:
    What i want is public to have read only access to file server. Public as in users who do not have a user account on mycloud. E.g someone who connects to to my home network for the first time and is able to browse and download content from public share. I'm aware of being able to set indivual access to shares for users like full access, read only and no access but public users won't have a user account.Through the My Cloud UI interface what you seek to do is not possible. The public share like all other share folders are an all or nothing affair when using the adminstration UI. When using the administration UI you do not have granular control on shared folders to limit non users to read only access or set permission levels for subfolders. The workaround to do what you seek and have the public folder set for read only is to change the folder settings via SSH. It may take some work to set the folder security so that users can read/write to the public folder while the guests only have read access. However, if you reboot the WD My Cloud or update the WD My Cloud firmware those settings may be reset back to the default settings where the entire public folder is read/write for all. There are way to prevent this but again it will take a bit of coding to do so via SSH. See this link (even though its for the WD My Book Live) for a starting point on how to use SSH to change the permission levels on the public folder. Another option if one doesn't go the SSH route is to turn off public sharing for the public folder then create a "guest" user account and give that "guest" account read only access to the public folder while all other user accounts have full read/write access.

Maybe you are looking for