Television suddenly Black and White picture.

I am putting this out there in case anyone else runs into this issue.
Last night we are watching television when suddenly all of the color disappears.
After a few choice words, and checking all of the connections, which all seemed good.
I tested the TV with a DVD and it's in color.  But everything coming through the Set Top box is black and white.
Tried turning it off, and back on, and it did not help.
Finally I unplugged the STB to force a reload. (I probably should have done this through the in home agent).
When I plugged it back in and everything re-loaded then it was in color again.

Which Adobe software are service are you trying to utilize to accomplish this task?

Similar Messages

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • Black and white picture

    hi
    How do I put colour in a black and white picture?

    Which Adobe software are service are you trying to utilize to accomplish this task?

  • Canopus ADVC110 is giving me Black and White picture which is misaligned

    Very new to Analogue to Digital converting so please forgive ignorance!
    I am in the UK. I have Canopus ADVC110 is giving me black and white pictures which is misaligned and shows specked picture noise. I see bottom on one frame and top of another with a black line ("frame" rebate?) running through the middle of the monitor screen in iMovie.
    I have leads from my camera plugged into the front of box and firewire out of the back into MacBook Pro running iMovieHD v6.0.3.
    I have set the dip switches to both PAL and NTSC just in case I got the output from my camera wrong (even tho' says Pal on it).
    In iMovie I choose DV as video format and it picks 29.97 fps automatically. iMovie shows me the capture is NTSC from the Canopus box.
    The Canopus website has poor support so I am at Discussions mercy!

    As you're in the UK, you MUST use the 'PAL' setting, and choose a new Project in iMovie to be 'PAL' ..that's 25 frames per second.
    If you do that, your import will be OK, instead of of shifted and black-&-white.
    Work with Pal throughout (25fps) and you'll be OK. Set iMovie's Preferences to PAL 25fps, then Quit iMovie and restart it, to force all future Projects to be PAL 25 fps.
    Do the same, too, for iDVD if you're going to use that to burn DVDs after you've edited your movies.

  • Why does a black and white picture come out with a tint?  iPhoto, Canon

    When I print a black and white picture from iPhoto, it comes out with a tint.  How do I prevent that? iPhoto, Canon MX310

    Hey neil293,
    Thanks for the question. If I understand correctly, when you print a photo in iPhoto it has a tint. I would recommend that you read this article, this article explains how to adjust the tint in a photo. 
    iPhoto '11: Adjust exposure, contrast, colors, and other qualities
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • Hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    You may want to read this I imported a mix of color and black and white raw files but lightroom changed all the black and white file to color?
    The Black and white you see is just the cameras representation of the "raw" pixel information straight from the sensor. The RAW file format has yet to undergo demosaicing, and so it contains just one red, green, or blue value at each pixel location.
    Lightroom, or any other RAW processor, doesn't recognize the in-camera processing because it is unique to the camera.

  • Apple tv 1 shows black and white picture???

    i got my atv1 4 yrs back.was using it with my old tv with the 3 component cables,and i used to get only black and white pictures.
    but after using it for such long time,i finally got a new led-hdtv.but to my surprise still the apple tv shows only black and white.i am not the getting what the problem is and how to fix it to make it color???

    Welcome to the Apple community.
    The fact that you are receiving a black and white picture suggests that you are using only one of the elements of the component cabling. Can you tell me more about how you have connected the Apple TV to your new TV please.

  • I own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

    i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Can I restore a wrinkled black and white picture

    How Can I restore a wrinkled black and white picture

    I doubt that anyone can provide this information to you without seeing the picture. You can post the picture here on the forum page via the camera icon at the top of the reply box. However, you can not do in an e-mail reply.

  • Colored objects in black and white pictures?

    How can i take a white and green dress to have just the green pop out but yet have the reamining picture be in black and white? Thanks

    Just desaturating can produce a rather flat image, though, and this method may give you a very peculiar shade of green, not the one you wanted.
    If the photo is in color, it's better and easier to just get out the selection brush (the one with the gears on it), select a B&W conversion style in the options bar, turn on the inverse checkbox and drag across the dress (assuming it's already the color you want). The rest of the photo will turn black and white, leaving the dress in color.

  • My black and white pictures show up colored

    My photos aren't the same as the filter I used in the camera when I was taking the picture, for example my black and white photos show up colored.

    Have you checked your ink levels and the inkjet jets for plugging?
    OT

  • Black and white pictures and raw format

    I started to use raw format. however, when i shoot pictures in black and white and download them to bridge, they get converted to color pioctures. Does anybody know why and what to do about this?

    In addition to this,
    Raw is Raw, meaning it captures all the data your sensor was capable of. It creates also a jpeg preview extracted in camera from this Raw file to show at your camera viewer and as thumbnails on your computer.
    You need a Raw converter to translate the Raw data to a picture in RGB (demosaicing they call this process).
    And every setting you choose in camera for shooting is just added as metadata like all Raw settings in the Raw converter are added as metadata to reflect the changes you have made. If you want you can delete those data and start all over again with the original file because this stays as it was taken when shot, regardless all earlier applied settings.
    Bridge uses Adobe Camera Raw for converting (demosaicing) the files and has it own code like others have their way of converting. It is possible that the vendor software delivered with your camera is capable of showing the in camera settings right away but then like Curt already stated it is just a reflection of your settings, the original is still the color image you have shot.
    There are lots of ways (and far better then in camera setting) to convert your color image to black and white. Just start a google search for some video tutorials and choose the one you like best for your workflow.

  • How do you add a colored picture on top of a black and white picture with out it turning black and white too?

    I am making grad invites and i keep trying to add a colored picture on top of the black and white background picture and it keeps changing the colored one black and white i am using Photoshop CC 2014! any help is greatly appreciated! I cant figure this one out!

    What is the file type? Is it a file that supports layers?  Is the color photo in its own layer?
    Please post a screenshot of the layers panel.

  • Black and white picture instead of color

    My main user account on a G4 running 10.2.8 started displaying b/w picture. I was able to fix this by manually switching to millions of colors in the "Displays" menu after each reboot.
    When I recently migrated the account to an iBook running 10.4.10 this is no longer possible (iBook's default option is "millions" but the picture is still black and white). I tried switching between various resolutions/settings and nothing helps. Resetting PRAM didn't help either.
    All other user accounts work fine so I guess there's a corrupt preferences file in the account's library.
    Anyone experiencing similar problems?
    Thanks,
    mladen
    Dual G4/1GHz & iBook   Mac OS X (10.4.10)  

    Go to System Preferences > Universal Access > Seeing tab and in the display section uncheck the "Use grayscale" checkbox.
    Hope this helps...
    (If the box was not checked, post back and we'll try some other steps.)

  • IPad mini first gen screen sudden black and White lines

    wondering  if anyone could help regarding my ipad screen. suddenly has white and black lines flashing across screen and will not stop. Already hard reset it and tried DFU mode but still no joy. Also says before It cut off completly that wi fi is not available at all as if it wasn't even a feature  of the ipad, really baffled. Any help would be greatly appreciated thanks in advance.

    Seems you've already tried the common fixes for these types of odd issues. My hunch is that if the procedures you've tried have done nothing, it may be hardware related and a possible trip to the Apple Store's Genius Bar would be your next move to get to the bottom of the issue. You'll need a reservation and your Apple ID:
    https://www.apple.com/retail/geniusbar/

Maybe you are looking for