Tell me the driver for audio for series c500 and model c505tu

Hi: I already gave you the driver above for the PCI simple comms controller. Here is the driver you need for the wireless card... This package contains the Broadcom Wireless LAN Drivers that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebook models that are running a supported operating system. File name: sp48591.exe You will also need this bluetooth driver for that model wireless card... This package contains software and a driver to support the Broadcom 2070 Bluetooth for supported notebook models that are running a supported operating system. The Broadcom 2070 Bluetooth Driver works together with the Broadcom WLAN Driver that supports the NIC in your notebook to enable Bluetooth connections. This package also provides additional Bluetooth Profiles. File name: sp50180.exe

Similar Messages

Where can I download the driver for Satellite A200-121?

Hello Team,
I need assistance. Where can i download the driver for my laptop?
Model Name: Satellite A200-121
Model No: PSAE0E
Appreciate your help. Thank you!

> I tried following the steps in all forums but my wireless LAN is not being recognize.
What does this mean exactly? Is Wlan card visible in device manager under Network Adapters? Can you see an unknown device or an Ethernet controller beside the LAN card?
From my knowledge the notebook supports the Intel 3945ABG WLan card
Did you install the Intel WLan driver for this Wlan card?

Can I use an external drive for Time Machine and storing other data?

At the moment I have one external drive, a 500gb LaCie. My internal drive is 160gb. I don't think I'll be using all 500 of those gigabytes for a while, so I want to put them to good use. Can I make a partition on this drive and use that for Time Machine, leaving the rest of the drive for my documents and other files? If so, how would I partition the drive? I'm not fluent in Disk Utility and even though I'm pretty sure I know how to do it, I don't want to screw up. Also, how big a partition would you recommend?
While we're here, I have a second question, somewhat relevant to the first. Could I move my Time Machine backups to a second drive if I wanted to? Also, if I used a big drive (say 1tb) could I use Time Machine to backup my current LaCie to a partition on that drive? Thanks in advance.

videoCWK wrote:
Does that also mean that I could back them both up on a very big drive?
Yes. Time Machine will, by default, back up all of your external drives unless you specifically exclude them.
Also, will Time Machine backups eat all my space after a lot of usage?
It depends on what you do on your Mac. If you work often with very large files (video editing, heavy photo editing, big disk images, Microsoft Entourage data file, Parallels disk image file, etc) then your backup drive could fill up very quickly.
I use my Mac mostly for e-mail, web browsing, iTunes, iPhoto, and the occasional iMovie project. I have 92 GB on my main hard drive (60 GB of which are my iTunes and iPhoto libraries, and one iMovie project.) My Time Machine backups consume 155GB on my backup drive, and that's after using Time Machine for a full year.

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
after the installation of windows 7 i cant use my wlan or audio.

http://www.apple.com/support/bootcamp/

I installed the driver for my hp t1300 and when i print, it opens my webbrowser

I recently installed the driver for my T1300. When I try to print from AutoCAD 2013, it opens a web browser and puts my print in the que on HOLD. Please tell me how to stop this from happening.

Hi Lazyadt,
The Designjet is a commercial product. I am linking you to the Designjet forums repost your question for better coverage.
Designjet Forum

Can anyone plz tell me the steps for performance tuning.

hello friends
what is performance tuning?
can anyone plz tell me the steps for performance tuning.

Hi Kishore, this will help u.
Following are the different tools provided by SAP for performance analysis of an ABAP object
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Need for performance tuning
In this world of SAP programming, ABAP is the universal language. In most of the projects, the focus is on getting a team of ABAP programmers as soon as possible, handing over the technical specifications to them and asking them to churn out the ABAP programs within the given deadlines.
Often due to this pressure of schedules and deliveries, the main focus of making a efficient program takes a back seat. An efficient ABAP program is one which delivers the required output to the user in a finite time as per the complexity of the program, rather than hearing the comment I put the program to run, have my lunch and come back to check the results.
Leaving aside the hyperbole, a performance optimized ABAP program saves the time of the end user, thus increasing the productivity of the user, and in turn keeping the user and the management happy.
This tutorial focuses on presenting various performance tuning tips and tricks to make the ABAP programs efficient in doing their work. This tutorial also assumes that the reader is well versed in all the concepts and syntax of ABAP programming.
Use of selection criteria
Instead of selecting all the data and doing the processing during the selection, it is advisable to restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code.
Not recommended
Select * from zflight.
Check : zflight-airln = LF and zflight-fligh = BW222.
Endselect.
Recommended
Select * from zflight where airln = LF and fligh = 222.
Endselect.
One more point to be noted here is of the select *. Often this is a lazy coding practice. When a programmer gives select * even if one or two fields are to be selected, this can significantly slow the program and put unnecessary load on the entire system. When the application server sends this request to the database server, and the database server has to pass on the entire structure for each row back to the application server. This consumes both CPU and networking resources, especially for large structures.
Thus it is advisable to select only those fields that are needed, so that the database server passes only a small amount of data back.
Also it is advisable to avoid selecting the data fields into local variables as this also puts unnecessary load on the server. Instead attempt must be made to select the fields into an internal table.
Use of aggregate functions
Use the already provided aggregate functions, instead of finding out the minimum/maximum values using ABAP code.
Not recommended
Maxnu = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxnu.
Maxnu = zflight-fligh.
Endselect.
Recommended
Select max( fligh ) from zflight into maxnu where airln = LF and cntry = IN.
The other aggregate functions that can be used are min (to find the minimum value), avg (to find the average of a Data interval), sum (to add up a data interval) and count (counting the lines in a data selection).
Use of Views instead of base tables
Many times ABAP programmers deal with base tables and nested selects. Instead it is always advisable to see whether there is any view provided by SAP on those base tables, so that the data can be filtered out directly, rather than specially coding for it.
Not recommended
Select * from zcntry where cntry like IN%.
Select single * from zflight where cntry = zcntry-cntry and airln = LF.
Endselect.
Recommended
Select * from zcnfl where cntry like IN% and airln = LF.
Endselect.
Check this links
http://www.sapdevelopment.co.uk/perform/performhome.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/afbad390-0201-0010-daa4-9ef0168d41b6
kindly reward if found helpful.
cheers,
Hema.

Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Hello guys, just the other problem I'm facing with the 840 G2
I'm working in the MDT image for the HP 840 G2 and I would like to comment you one problem that I found with the USB 3.0 drivers. Based in your webpage, the last HP USB 3.0 official drivers are:
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3.0.1.41 A from 15 dic 2014
I have found that those drivers doesn't work properly; if you insert a Kingston DTSE9 (32GB) the content of the usb will not be accessible randomly. The event viewer will display:
The driver detected a controller error on \device\harddisk1\DR13
To solve this problem you have to obtain the last version of the drivers from the Intel webpage:
https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...
I have all the drivers properly installed and it seems that the computer is working fine, however I'm a little worry thinking if I should update all the driver to avoid possible problem like this one.
If you have found similar problems it would be nice to share it.
Thank you very much.

Hi,
Please use the following post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I need the driver for Palm VII for Windows 2000 and or Windows XP

I recently got a Palm VII and I would like to get the auxillary keyboard but I can't find the driver for this keyboard. It is susposed to be on the web, but the sites I have checked do not even mention the Palm VII. Can anyone point me to the proper site?
Post relates to: Palm VIIx

You have Conexant SmartAudio 221. Drivers for audio ,along with your Intel Chipset and others are in PART 2 of the XP Downgrade Guide
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I can't load the driver for a canon ir c2550.

I can't load the driver for a canon ir c2550. Installer gets to where it looks for the drive and never finds it. Drive only has 18G of space left. Help??
I have an early 2008 MacBook Pro
Thanks!!

Thanks so much for your response
I reset printer systems, and was only able to add Canon MG6200 series, either with Bonjour or Canon IJ Network, but cannot find the correct printer software for MG6250 (there is no option for any Canon MG printers) the only choice is Generic PostScript Printer.
I have tried using this, but the print job is not going to the printer itself, it appears that it is, but then under the canon print box, it simply dissappears.
Paul_31
At this point is the printer connected to the Mac via a USB cable?
Do you think that I should attach the printer with the old usb cable from my previous printer and try that appears to defeat the purpose of having a wifi printer Or will this simply allow the computer to find the printer and then I can remove the cable? Thanks

The driver for windows 98 on printer Deskjet 3000

1. HP Deskjet 3000 Printer CH393A
2. Windows 98
3. For me are necessary the driver for printer HP Deskjet 3000 for Windows 98. Please, help!

You may download audio drivers for XP from Lenovo site or from www.realtek.com.tw.
Message Edited by Peter on 05-21-2008 01:52 AM

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Should I combine two 1Tb drives into one logical 2Tb drive or use one 1Tb drive for system/apps and move /users to the other 1Tb drive? (I'd like ease of b/u too.)

Hello,
I have two 1Tb drives in my Mini, the first is full and the second one empty. (I've been using the 2nd for Time Machine but the full source from dirve 1 soon has Time Machine complaining.) I am contemplating whether to form one 2Tb logical drive from the two 1Tb drives or segregate their use, i.e. use the first 1Tb drive to hold the system and applications while moving the /users directory tree to the second 1Tb drive?
I'm assuming both are straight forward to do accomplish but have nagging doubts about segregating drive usage, will moving the /users directory tree to the second 1Tb drive:
impact apps which might otherwise expect to see particulat fies and directories in specific user related locations on the system drive;
hinder backing up (by having to setup two separate Time Machine activities)?
Finally, is there a better 3rt option?
Thanks,

Thanks and sorry Allan,
The supplementary questions would arise should I NOT chose to combine the separate drives into a larger logical one but to keep one of the two drives for system/apps and the other for users data... I assumed that segregating drive usagel like this might reult in issues with apps which might expect to see some user directories/files on the same drive as the system/apps. similarly, with two physical drives, I'd be looking to managing separate Time Mchines. (I have a few 2Tb pocket drives for backups.)
Final question - if I do combine into a single logical drive (for system, apps, /users ... the whole lot), would I have any problem getting this logical one working from a Time Machine backup? I ask that this backup was taken from the 1Tb physical drive and now I'd be looking to put it back onto a 2Tb logicl drive.
Thanks,

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?
On the label it says, Model HSTNN-PD06-91
and
HP PN: 518819-001 Rev.B
I've had my Mini 110-1000 running our music system for a couple of years, no complaints. When I wanted a CD/DVD drive, I purchased a DE8A4L external USB drive directly from HP. It didn't come with a driver disc. When I plug it in, the USB subsystem does not enable it. Device Manager shows a yellow exclamation point, saying, "Windows cannot load the device driver for this hardware..." It is running Windows XP Home Edition SP3.
What gives with this device?

Following up on tactic 2) above, I upgraded the BIOS from version F07 to the latest version available on the HP download site, version F19. This went well, but unfortunately the system still does not recognize the device.
When I try to Device Manager, and select the DE8A4L DVD device, and try "search for a device driver", it says it cannot find a better match for the driver already installed.
This Mini 110-1000 only came with 1 Gb RAM, and Windows XP Home. Is one of these a critical limitation for running an external USB DVD drive?

Tell me the driver for audio for series c500 and model c505tu

Similar Messages

Maybe you are looking for