[tellico] slow as hell

hello,
with the recent update of tellico to the qt4 version, it's almost not usable, because the interface is very slow. I've experienced this on a base of roughly 50 articles, which is quite small. I don't have any problem running kde or kde stuffs, only tellico is slow.

strange. I've tested it on another archlinux computer, and it's equally slow. I've tried with an emptry database, it's less slow for navigating through the menus, but when I had a few entries, it's getting slower.

Similar Messages

Yoga 13 Firefox slow as hell.

Is it just me or is Firefox slow as hell on this thing? I'm talking about page rendering and scrolling speed. Heck, even as I'm typing this, I'm experiencing lag with the characters appearing on the screen. Chrome behaves better but still lags behind much older and slower machines I use on a daily basis. IE Metro seems to be perfectly fine, but I rarely use it. Even Safari in a OSX Mavericks VM running on this same system even seems to be faster.

My desktop firefox seems responsive the rare times I use it. I mostly use desktop IE, and have to say there are new bouts of occasional freezes... I can't even change tabs for about a minute. There seems some responsiveness lag, so when I scroll with a finger swipe, it gets treated sometimes as a double tap magnify as if it is doing slow sampling.
Maybe firefox would do the same if I used it as much. I checked my lenovo pointer driver for a newer version, but the old one is called current. I wonder if some windows update caused this delay mode. I wish I knew how to turn off the double tap magnify gesture anyway...

WRT54G V8 Slow as hell wireless connection

Im about to go on a killing spree because I cannot figure this out. I have a desktop connected to the router. The router to the modem. I can get on the internet fine with nice speeds on the desktop. When I connect wirelessly with my laptop it is slow as hell. Wont load anything than after 2 minutes it will load it all at once. I have no idea what the heck is going on. I've changed settings and changed them back in the router config. What could possible be causing this??????

I have exactly the same problem with my WRT54g V8 router. My Dell laptop takes forever to load web pages. My desktop "flies" when connected via ethernet but slows like the laptop when I connect wirelessly using a USB wireless adapter WUSB54G.
When I connect to my neighbors Netgear wireless, everything is very fast. When I use my old Microsoft wireless router, things are very fast. When I go back to the Linksys, SLOW SLOW SLOW!!!!!!!
I have updated the firmware to no avail. Changed channels and turned off all wireless security.....no change!!!
I am running Windows XP SP2 and using Comcast cable broadband.
Any suggestions would be greatly appreciated.
Bob

Forum slow as hell

Whats going on with this forum I mean if sun cannot program a decent forum purchase vbulletin or something similar... on a T1 it takes 2-3 minutes sometimes to load a thread with 4-5 replies. SUN if you want me I can write you one for free just to get credit for it or atleast fix it.

The forum speeds are much better than they used to be, and this forum happens to be one of the fastest I use.
The problem you experienced is more likely to be one of:
* A transient fault - eg: a backup is done when you use it most
* A problem with your connection, eg: noisy line
* A fault between you and the forums
* Most likely - you are using netscape or other slow/old/cr*p browser.
Forums tend to make extensive use of tables, and my experience of most versions of netscape is that they struggle with tables. Why don't you try IE 6?

Netflix slow as hell again

Netflix slow as a dog...again. 75mbps down, 30mbps up on speed test. Yet I am watching Netflix at 350px resolution. **bleep**! This has been going on for a month now. Peak times, low res and buffering. Fix your stuff guys.
Too much more of this and Bright House will start looking good again. Sad.

strange. I've tested it on another archlinux computer, and it's equally slow. I've tried with an emptry database, it's less slow for navigating through the menus, but when I had a few entries, it's getting slower.

Ovi suite slow as hell on windows 7

After a long time of not using Ovi suite, I downloaded yesterday the newest version from the Ovi suite.
When I ran the installer, it said that I'm installing the newest version, but after installing and running ovi suite, I get a message that a newer version was found(even though I was on 2.1.1.1) and that it wants to update to it. Fine, I said, updated. Version stayed 2.1.1.1.
After that, I connected my phone, a 5800. This was nightmare. Ovi started syncing, and got stuck on syncing photos. It took me about 20 to CANCEL the photos syncing.
Afterwards, I started backing up my phone. This went OK through out the entire process, except the ending - Ovi got stuck and had to be closed.
After closing Ovi, I noticed a process, Nokiamserver, that was eating my disk with reading. It kept reading and reading and reading. I eventually had to close it because I just could not work with that process reading so much from the disk.
The overall Ovi interface is very slow as well. Everything takes its time to load, everything moves slowly. I was quite disappointed with that.
Nokia - can you make a good syncing program that will really compete with iTunes? That will work good and fast?

Hi All,
I'm new to this forum, and Nokia phones.
Bought a C5 yesterday (sell-out of old stock) because it said it did offer what I need:
Basically a USB-stick with a screen, offline GPS navigation and telephone. I don't need no mobile Internet access.
Well, what can I say: This device sucks, and massively so. User-unfriendly, ridiculously slow, and unnerving features like disappearing maps, etc. As close to a first grade ripp-off as it can get. It just nearly does what it is supposed to do; just enough so you can't actually sue Nokia for ripping you off. But then again, it does not guide me to where I want to drive to. It does not download and remember the maps i need, etc.
VERY disappointing. Look for mine on ebay - I need a hammer to hang a picture from time to time. I don't need to invent, engineer, manufacture and assemble the hammer in the first place each time I want to hang a picture!
Nokia: This is 2012. If you want to be here by 2013 you have a LOAD of basic homework to do! Detention for 12 months!

N96 Buggy and slow as hell

I am having poblems with my N96. Its soooooooo slow. Its so hard to play music. When i press the centre navi wheel key to play a track the highlighted line moves up or down randomly to another song but wont play the song i have asked for. It keeps freezing. Its slow through the menu's. I have reset it twice. Its sim free. But about 6 months old. Does anyone have any suggestions? I was thinking about reinstalling the FW but then i will have to redo all my 100's and 100's of music tracks again.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

I have done that already as i said before. I think a trip to the service centre is in order. Always problems.synth_fg wrote:
Think a full reset may be your best option,
Yes it will take time to reinstall, but it should solve your problems
Moderator note: offensive language removed. Please do not try to circumvent the language filters.
Message Edited by michaels on 13-Apr-2009 09:36 AM
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

MSI K9A2 Platinum Phenom 9550 slow as hell

hi guyz
i just recently put 2gether a new rig at long last, not as grand as some i've seen on AMDzone but its a good start. i was using an old Athlon XP which is far too slow to run pinnacle 12 (video editing s/w) hence the new upgrade. after purchasing the phenom 9550 i was expecting to fly, i mean compared to my Athlon who wldn't. i stuck with XP although i play games vista is too system hungrey so i've heard. anywayz after getting my rig up installing the latest sp3, m/b drivers, bios upgrade the whole works, the performance was almost the same as my Athlon which really freak me out. i splash so much on the new rig n got my old Athlon back
i've chk on AMDzone n haven't really got any sold solution. i've email to AMD n they replied telling me all the things a newbee wld get confused on. even during boot up is slow, i remove all those fancy interface (graphics) stop all those unwanted staff in services n startup is very minimal. when i start pinnacle for example its real slow. i saw on youtube a guy who showedoff his 9550 n it was flying nothing like mine. i wld appreciate if any wld has any suggestion as to what might b my problem...
my rig
MSI K9A2 Platinum (recommended by AMD)
phenom 9550 x4
seagate 500GB HDD sata
EVGA 8800 GTX 768MB graphic card
Crucial Ballistix DDR2-PC26400 (800) x 4
700 PSU

Quote from: Sm3K3R on 05-February-09, 23:21:47
prince_terry ,this was my first impression too, in the first month.
After i installed all drivers in the proper order ,after i assured the RAM is in dual channel ,after i have put the SATA HDD at SATA 1 specs (to make the computer boot up faster ),after i updated to latest BIOS -es ( the video and mobo) ,the computer started to be what it should have been.
Make sure you have good drivers for the SB 600 ( if your HDD is conected to its SATA ports) ,in XP SP 3 you should use older drivers ,that are not available on the MSI website at this moment (there were available somewhere in the 2008 spring-summer).The package available now doesnt have the PATA drivers(IDE emulation) and this may show poor performance for the drive in games(choppyness).
On the other hand the 9550 is inferior, in my opinion ,to a X2 6400+.Sure 6400+ is only dual core ,but there is a lot of software that doesnt know what a quad is.
Also make sure you disable Cool and Quiet in BIOS options and HPET option (recomended OFF for XP) and in On Chip SATA BIOS section under Integrated Peripherals make sure PCI IDE Busmaster option is on (a legacy option that will speed up Windows installation for ex.).
Also a poor PSU with low voltages may lead to same poor performance,check the voltages (with a digital multimeter) and make sure they are in spec.
do u hv any good location for the SB600 that i can download from. all my bio update r from MSI website. C&Q has been disable will look into the rest n let u knw the outcome. thanks

Fix for slow-as-hell refurb ThinkPad Twist S230u

I recently got a refurbished ThinkPad Twist, and I was having issues with lagging - everything was taking forever, both web-based and local. Kept monitoring performance and nothing seemed amiss with memory or processing, nothing wrong with my internet connection. After a little digging I found that using Lenovo Solution Center solved my problem - it prompted me to update the BIOS, there was some kind of update related to power management, and there were some Windows patches. As soon as I did that everything was running as smooth as silk. Seems a little shady the refurb people wouldn't have done those updates since they came out before I got the laptop, but whatever, just glad I got it solved. I thought I was going to have to try a factory reset but no!
I just wanted to share here since I spent a ridiculous amount of time winding my way through the labyrinthine Lenovo website, when all I had to do was go to Start and type "update." So if, like me, you're pissed off that your brand-new-to-you machine is faulty, do yourself a favor and try that first and see where it gets you.
You can also do a hardware scan through Lenovo Solution Center - which it seems like if you just got a refurbished machine and the hardware scan didn't come out clean that would be a tip-off that they didn't do their due diligence in testing it.

Thank you. I bought my Twist brand new and it has always run slowly until now thanks to your post. I really appreciate it.

Well, at least the new forums are slow as hell

Anybody else waiting 30-90 seconds for a category or forum page to load?

guitar_man_F wrote:
jverd wrote:
Anybody else waiting 30-90 seconds for a category or forum page to load?yup.
- AdamSo this is what the forum looks like now. Can code formatting handle generics now?
Ouch, hmm.. the most popular tags should be filtered :)
Edited by: kajbj on Sep 12, 2007 8:50 PM

SAP B1 Patch 42 GUI, Vista SLOW MOTION

Hi,
I just don't know if I'm alone with this.
I didn't find any thread about it.
I've successfuly installed SAP B1 2005A SP001, Patch 42 on Windows Vista Home Premium. Everything works find
Except
When windows pop, its slow like hell. You know this animation when you open let say Sales Invoice window.
Well in Vista, it takes at least 10 seconds like if everything was in slow motion. But when the window is there, everything still works as normal !
Any idea ? Any patch ? Anything ?
Thank you

Hi,
Nice link but I'm not on version 10 but 42 and there's no error and no problem. Just the GUI is slow.
I don't think Vista is to blame but rather the poor SAP GUI which really need a fix since a LONG LONG time
that would also probably fix the problem of .NET WinForms not sitting on top when called from SAP
I'm more looking if someone knows something about it, a patch for the GUI or even a registry key that would disable the SAP window animation.

Super Slow DSL Speeds

I have been without internet for a week. Verizon finally fixed the problem yesterday afternoon and my internet service was restored but now I have super slow DSL speeds. 0.36 dowload & 0.54upload.
I am tired of calling tech support and being told to reboot my computer, modem, yadda yadda. There is something else going on here and need to figure out if it is with the modem itself or the line. All the line tests the tech support people have done come back normal.
The modem is reporting the OAM ping test as failing in Far End F4 Loop Back Count & Near End F4 Loop Back Count. No idea what that means.....
The speed from the modem itself is listed as:
Speed(Down/Up):
416 / 640 Kbps
I've done ipconfig flush dns, ipconfig release, ipconfig renew, etc etc. In home agent is reporting a problem with the dsl signal and just instructs me to reset the modem which does not help.
The modem is old, GT704WG from verizon. I am thinking about going out and buying a new one but don't want to do that if it is not going to fix the problem. It just seems odd that last week internet speed was fine and now it is slow as hell.
I had no internet or phone this week which they are claiming it was due to a line being pinched when my house was re-stuccod in December(granted internet and phone worked fine up until last Sunday). Verizon went under the house and fixed the line, phone & internet came back on. When I logged onto the browser I was prompted to activate my verizon service( I guess because it had been out for a week). Did that, got onto websites but connection is extermely slow and I am at my wits end.
I've spent more time on the phone this week with the unhelpful verizon people then I spend all year talking to my relatives and I really don't want to call them back and sit on the phone for another 45 min to an hour.
Anything I can do to diagnose and possibly fix this?

I appreciate you taking the time to answer my post, however your tools do nothing to tell me what is going on nor am I going to schedule yet another repair.
This past week when I had a "repair" scheduled, I was told they would be out on wednesday to fix our problem. No time frame was given for when this repair would take place. My retired father waited at the house the entire day only to have the repair man show up at 4:30pm who told us it was too late in the day to wait 5 min for us to move some boxes out of the closet that were over our crawl space so he could go under the house and fix the damaged wire. Instead he ran a long phone line from our box to our kitchen phone, told us this was a temporary solution and that if we called the repair center in the morning someone would come out in the morning and fix it.
We called in the morning, only again to be given no time frame for the repair. My father again waited all day, this time no one showed up. Even after he called 3 x's that day trying to get information on when the tech would be there....
Finally on Friday after spending another entire day waiting for a repair man did one show up around 3 in the afternoon one did, he went under the house and fixed the wire and our phone service was finally restored after 4 days. The dsl finally came back on albeit at a super slow speed as I am experiencing now.
Right now I am currently calling around to get rate quotes from other providers for our phone, internet, tv, & wireless. My experience with your "customer support" has soured me to verizon even though I have been with you guys for 10 plus years. I don't want to spend one more day waiting for repair man who may or may not show up. I don't want to spend another hour to hour and a half on the phone with some man in India who is just going to ask me to reboot my pc and modem over and over again and run a "line test" which is the same thing your automated phone service asks you to do as well.
Your company just doesn't get it when it comes to customer service. I pay my bill every month on time and in the 10 plus years I've been with you this is one of three times I've called for support. Each time I've had a horrible experience and the only thing that has kept me with you is that most of the time the service works as it should. I have heard FIOS is relatively trouble free, at least in my neighborhood, which is the only reason I am still considering the upgrade but if I do find a more reasonable deal with a company that has a better record for customer service I will be cancelling my order. I have a few weeks left to decide. It's unfortunate too because there are some nice folks that work at verizon but your company philosophy towards customer service has changed the bigger you've gottena and you've lost touch with what your customer's need from you.

Slow tcp traffic over ge0 interface

I have a server that while using ge0 for UDP traffic, it uses full bandwidth, but for tcp is slow as hell.... ttcp is showing how slow it is, into the kbps rather than mbps. I want to know if there is a specific patch to fix this.

I've been double checking everything this morning and I feel we were not attacked. All the MAC addresses in my capture are valid system addresses. ISE does not show any authorized machines attempting to connect to the switch. We have DHCP snooping enabled throughout the organization. That was a great article to learn from though.
I've included a visio of the setup and a snippet of the wire capture and arp/mac tables as were captured during the incident. Traffic from the fileserver intended for employee 2 was flooding the port employee 1 was connected on. The destination MAC address of the packets were not meant for employee 1.
Default config for both ports:
switchport access vlan 101
switchport mode access
ip access-group ACL_DEFAULT in
authentication event fail action next-method
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication violation restrict
mab
snmp trap mac-notification change added
snmp trap mac-notification change removed
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
spanning-tree bpduguard enable
Am I missing something? Was this an attack? Was it a fluke?

Systemd suddenly became slow at booting up

Hi! This is gonna be a long post, sorry
I've been messing around with this problem for too long time, so i know really need your help
The facts:
1) since, i guess, a month, my netbook takes 10seconds more to boot. I was used to have something near 12s. and *yesterday* i had a 23s bootup.
2) I wrote "yesterday" because today:
systemd-analyze blame
19837ms NetworkManager.service
17262ms psd.service
2815ms wpa_supplicant.service
2027ms systemd-logind.service
1476ms dev-sda2.swap
751ms tmp.mount
692ms systemd-udev-trigger.service
650ms systemd-udevd.service
426ms systemd-user-sessions.service
424ms polkit.service
232ms verynice.service
155ms systemd-sysctl.service
Psd.service is triggered by a TIMER unit, 30s after startup (well, after 30s i've always already been with my desktop full loaded...so it took 4-5seconds maximum to load that).
NetworkManager is getting me crazy: yesterday it took 21-22s to load. Today, I noticed that even my "home" laptop is taking more time to bootup, 21s instead of about 13s before. And over there NetworkManager.service takes 9s now. But then i recalled about /etc/uder/rules.d/80-net-name-slot.rules. So i managed to kill that rule, by fixing my scripts. Everything went fine, and my NetworkManager.service now takes 5s (on my home laptop), and bootup takes 15s.
But, doing the same thing on my netbook, drove me to that "blame" posted before. No gain, it seems. And now my systemd is slow as hell to bootup (on netbook), "systemd-analyze" says 33s (but it reached even 55s on another boot).
3) I have testing repo enabled on both machines.
4) From "systemd-analyze plot" it seems that both machines are doing nothing for about 4-5s. This is the plot from my home laptop: http://postimage.org/image/hfymnd6v5/full/.
On the other hand, on my netbook, there are 256 "sys-devices-virtual-tty-tty*.device" ...but on the home-laptop plot there aren't. See here: http://postimage.org/image/evh4rbgmt/full/ . (can't upload it bigger, but you see there are lots of "lines" that shouldn't be there....)
Any idea? Hope i've been clear and thorough enough.
Thanks!
EDIT: i now noticed that even on my brother's netbook there are those "sys-devices-virtual-tty-tty*". He has a ssd, so it takes 5s to boot anyway. Both installation are old (systemd < 190), while my home laptop installation has 2 weeks.
Last edited by nierro (2013-02-08 11:56:26)

hi rossclark13693,
Welcome to the Forums.
If the Ideacentre K430 didn't came with an mSATA SSD as your boot drive, try to:
1. Run Disk Defragmenter to fix fragmented boot files that's slowing down the PC.
2. If the boot time is still slow, you may want to check the disk for consistency. You can use HD Tune and run an error scan on the drive.
Let me know your findings.
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Extremely slow working Satellite 1800 after OS reinstallation

I bought a second hand Satellite 1800. I collected all the drivers from the producers website, but when I formatted the HDD and installed WXP (my own copy, not any bundled software) the notebook works extremely slow... before during HDD read/write process you could hear that typical for it sound... now the hard drive is perfectly noiseless during operation as is slow as hell...
I tried to follow up with the web and it turns out that if I reinstalled the OS from Toshiba Recovery CD it should do the thing... too bad I didn't know I should have such CD when I was buying it... so now I don't have it... Is there anything I could do about it?
Plz Help
Q.

Hi
As far as I know this unit is delivered just with W98SE and WME. The recovery CD with WXP operating system for this unit is not created by Toshiba.
You can install WXP and use all drivers from Toshiba download site. I dont know how much RAM has your unit, but if the unit has under 128 MB RAM you can not expect that your unit runs fast.

[tellico] slow as hell

Similar Messages

Maybe you are looking for