Telling HD and SD versions apart
Good day all,
I recently downloaded an HD television series and as expected, each episode has an HD and an SD version.
I realize that I can display the file size in iTunes and the larger of the two is the HD version. But when I show the series entries on my Apple TV2, it displays both entries with no way to differentiate between the HD and SD versions. Am I missing something? How can I consistently select the HD version?
Thanks,
Alex
Alex Neil wrote:
ATV version 4.4(3061.1) - Apple Developer.
that could be the problem.
if memory serves, the initial version of iOS the new TV shipped with did not display the HD logo but Apple fixed that with a subsequent update. maybe the developer version 4.4 is lacking the feature.
No other differences within INFO.
you won't be able to use iTunes get info to edit the HD tag. you need to use a tagger app such as the one i provided the link for above or Subler.
Similar Messages
-
I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!
Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
What is the difference in 4.0, 4.6 and ECC versions of SAP?
Hi
What is the difference in 4.0, 4.6 and ECC versions of SAP?
ThanksSAP R/3 is basic ERP that every one keeps talking about which has got different versions ike 3.1, 4.0, 4.6, 4.7. The latest one in this is the ECC which again has got two versions in the market - ECC 5.0 and ECC 6.0.
NetWeaver is the techology stack which gives other solutions that work with R/3 and also provide a technology platform for the ERP to work.
EP - Enterprise portal is a part of the NetWeaver stack and can be used to provide web interface for the user apart from the standard protal functionalities.
You can find more details of NetWeaver here
http://help.sap.com/content/documentation/netweaver/index.htm
and also check these..
Re: R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/frameset.htm -
I am using old iphone 3G with capacity of 8GB memory, when ever I try to download any application it is telling it require newer version of software or iOS 4.3. can I get this software or not. I even restore my all my software online, in that process I lost my contacts, photos, notes & mails stored & saved in my iphone. After that also no use, Please advise how and where can I get that.
Iphone 3g can only go to 4.2.1
Sorry -
I updated and now i can't use the itunes. I have unistalled several times, installing newer and older versions but still i get this message. Is there anything i can do to fix this problem??
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model. -
When I try to load a PDF inside Iframe and I disable toolar=0 (as guided by adobe). I am able to see the iframe with PDF with no toolbar in IE and lower versions of Firefox (till version 14).
But in my current version 29, The PDF is visible with toolbar on top.
Can you please let me know the way to display pdf with no toolbar in Firefox 29?I replied on your similar question here: https://support.mozilla.org/questions/1005225
-
Active and delivery version of ODS
hi
can we check or compare ther delivery version and active version of the infosource.
is there any transaction or table other than RSA1-business content where we can compare objects in infosource.Hi,
RSIS info source for transaction data
RSOS info source for master data, texts, hierarchies
Regards
Siddhu -
How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2 -
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
Can I run Release Candidate (19.02), Beta, Nightly, Aurora and ESR versions on the same computer?
I know I can run the Beta and Nightly together on the same computer because they are installed in different directories. What I do then is that I have a Profile for each version. What I do is I run FireFox.exe -ProfileManager when I start either the Beta and Nightly builds.
My Question is can I also install the Aurora, Release Candidate and ESR versions on the same computer like I do with the Beta and Nightly? If so, how do I go about installing them in different directories? I will create new profiles for each version. What I then do is, copy everything in my original Profile to the newly create profiles so I can keep all my plugin/addons, themes, bookmarks, etc. the same.
Next question, (I think I know the answer but I just want to make sure) now can I sync my bookmarks from each of the different profiles that I created?
Secondly, I now I can do the ABOUT:CONFIG in the address bar of Firefox, does anyone have any idea where I can read up on what each entry means? Also, are there any other secrets in Firefox, similar to the ABOUT:CONFIG trick? I know of one app where you can do ABOUT:ME, but that's all I know.
I know this has been asked billions of times, but I also have to ask. Is there any chance at all that Firefox, Thunderbird, and/or Seamonkey will be ever release for the iOS from Apple? I know that it's impossible, but maybe someone MIGHT have some positive thoughts on this?
Lastly, I know this is off topic, but I'll give it a shot. I'm using Outlook 2013, does anyone know if Outlook can handle Newsgroups? The reason why I ask is because I've just learned that there are a ton of newsgroups for Firefox, ThunderBird, and SeaMonkey. I would like to, somehow, get those Newsgroups in Outlook 2013. I already get allot of the feeds for other things, so that's not a problem.
I would appreciate it very much if anyone could help me with these issues.
Thank You.You can consider to use Firefox Sync to sync all the profiles.
You can do a custom install of each version and install each version in its own program folder.<br />
Safest is to modify the desktop shortcut and add -P "profile name" to the command line to start each version with its own profile.<br />
Be careful with clicking a file in Windows Explorer to open the default browser, so make sure to select the correct profile in the profile manager and check the don't ask setting.
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile -
after having my mbp upgraded with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
The user name and password on your computer has nothing to do with your Apple ID.
Good luck,
Clinton -
Actual and Plan Versions annual view - Multiple versions per company code
Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind RegardsRemove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube. -
How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.
There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album. -
Is it possible to have PDF and PNG versions of 'same' folio
Is it possible when copying over the articles to have one folio as PDF and another as PNG?
Tried doing this by setting up an alternative folio as PNG and copying across the articles that were created for the original PDF folio, but they still appear to be PDF when loaded into the new folio and previewed on tablet, even though it has been set to PNG.
Do they only get converted to PNG when published? shouldn't one be seeing thumbnails in the DPS Folio Producer: Editor browser window. Trying to preserve the meta data tags between folios, or do I have to re-export these files and re-input the tags and attributes manually.
I see there is a way of copying articles between folios at an admin level, would this result in a correct transposition of PDF to PNG?We use the K4 publishing system, and haven't started using their plugin yet, as we are still 'kicking the tires'. That said PDF and Android don't play together so well, hence looking at a PNG version without having to re-enter all the metadata again, which is what happens with the method you describe above.
The trouble is that the meta data is not part of the Indesign document so we have to re-enter it all plus there is the open/checkout/checkin/close of all documents from K4 which is a royal PIA, so uploading the same indesign documents isn't really helping. If the sidecar file worked 'properly' then perhaps that might be a solution, hear its not quite there though?
So, copying the article across to a new folio looked like it might work but not sure why when it asks when setting up the folio, whether you want PDF or PNG specs those do not stay set or why they are ignored on copying to the new supposed PNG rendition.
Would the K4 plugin solve this? would it work for all formats if we are building an Ipad and iPhone and Android version of a folio from the same document sourced in K4.
Maybe you are looking for
-
Is it possible to change file name policy in the JRE cache folder?
We are getting calls from our clients complaining of slowdowns in loading our Java applet. The reason is a virusscanner. If a virusscanner is in the middle, it can drastically slow down the download process, and therefore cause some high delay before
-
Hi everybody, I really reached the limit of my diagnostic ability... ...please help me!!!! I subscribed an Online Sharepoint 2013 Development site to try Business Connectivity Services and InfoPath forms. Using SharePoint Designer 2013 I successfully
-
Transaction launcher: open URL in new window
Dear all, I know many threads have already been posted about "stateful URL" created with transaction launcher, that open a new browser window AND navigate to an empty screen with the following text (which is more than useless): "The requested page ha
-
Problem to make apple id without credit card
i had bought new iphone 5c last year at the end of the year,,but when i want to sign in into app store..i had to review the apple id because it's still not connect to itunes store,,after reviewed it,,i had to make billing payment meanwhile i'm the ne
-
Hi, I want to open a file using OAF. I know the path and file name. How can I open it, if file is in UNIX or in windows, where ever. Is there any way to do that. Thanks in Advance!!