Telnet 25 with connect failed

Install GWIA and check GWIA agent start.
Check GWIA gateway SMTP service enable.
How can I check?
THanks.

Originally Posted by konecnya
In article <[email protected]>, Hoiyi88 wrote:
> Install GWIA and check GWIA agent start.
> Check GWIA gateway SMTP service enable.
> How can I check?
>
Telnet to port 25 is the standard test, so perhaps a firewall is in the
way. Note that most ISPs block port 25 from home users to anything but
their own mail servers, so are you checking from the next pc over or
over the internet?
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: View Profile: konecnya - Novell Forums
Firewall disabled and telnet from internal network to mail server.

Similar Messages

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

LMS 3.2 and RME 4.3.1 telnet with tacacs+ fails

Hi everyone,
I'm having issue with credentials verification for telnet with TACACS+ enabled. Verification job fails with "Telnet: Incorrect" and an exception to daemons.log:
om.cisco.nm.lib.cmdsvc.CmdSvcException: com.cisco.nm.lib.cmdsvc.telnet.TelnetException: Unable to read from socket
 at com.cisco.nm.lib.cmdsvc.TelnetSession.connect(TelnetSession.java:89)
 at com.cisco.nm.lib.cmdsvc.Session.connect(Session.java:152)
 at com.cisco.nm.lib.cmdsvc.AuthHandler.connect(AuthHandler.java:254)
 at com.cisco.nm.lib.cmdsvc.OpConnect.invoke(OpConnect.java:56)
 at com.cisco.nm.lib.cmdsvc.SessionContext.invoke(SessionContext.java:299)
 at com.cisco.nm.lib.cmdsvc.Engine.process(Engine.java:57)
 at com.cisco.nm.lib.cmdsvc.LocalProxy.process(LocalProxy.java:22)
 at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:190)
 at com.cisco.nm.lib.cmdsvc.CmdSvc.connect(CmdSvc.java:166)
 at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.CliOperator.<init>(CliOperator.java:214)
 at com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.transport.IOSCliOperator.<init>(IOSCliOperator.java:116)
 at com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.transport.CatIOSSwitchCliOperator.<init>(CatIOSSwitchCliOperator.java:56)
 at com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.transport.Cat6kIOSCliOperator.<init>(Cat6kIOSCliOperator.java:32)
 at com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.transport.Cat6kIOSConfigOperator.getOperator(Cat6kIOSConfigOperator.java:35)
 at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.OperatorCacheManager.getOperatorForDevice(OperatorCacheManager.java:50)
 at com.cisco.nm.xms.xdi.pkgs.LibDcma.persistor.ConfigOperation.doConfigOperation(ConfigOperation.java:99)
 at com.cisco.nm.xms.xdi.pkgs.SharedDcmaIOS.transport.IOSConfigOperator.fetchConfig(IOSConfigOperator.java:73)
 at com.cisco.nm.rmeng.dcma.configmanager.ConfigManager.updateArchiveForDevice(ConfigManager.java:658)
 at com.cisco.nm.rmeng.dcma.configmanager.ConfigManager.performCollection(ConfigManager.java:1646)
 at com.cisco.nm.rmeng.dcma.configmanager.CfgUpdateThread.run(CfgUpdateThread.java:27)
I've tried to edit TacacsPrompts.ini also with suggestion to enter "," after last space character
I'm using only TACACS so all prompts are the same. I'm using MOTD also.
TACACS prompt looks like this example : "TEST username: ,TEST password: " so this looks obvious.
The issue started to appear after some patching done to RME and CiscoView, but I'm not sure that this is connected anyhow.
Thanks for all the help

Hi!
They gave me the solution like this:
line vty
timeout login response 90
Ofcourse it helped but this it still inproper behavior from LMS side. It sends the username char by char for more than a minute! Guess the scenario with thousands of devices.... It will take ages to telnet to them. And network performance has nothing to do with that - i'm running the LMS on a powerful Sun and the network is mostly gigabit connected.
Setting timeout login response is a workaround but does not fix the problem.
Still waiting fot some fix to LMS not for fairly acceptable workarounds.
This is NOT case with TACACS enabled on a router. The box responds within moment when telneted using commandline or other NMS software. This is a problem with LMS telnet login mechanism and prompt parsing (TacacsPrompts.ini doesn't seem to work at all, I could type there anything and it has no effect on the login proces).
Besides this SSH to the same box wit TACACS works flawlessly. But then it parses only password prompt not the username - this is sent by ssh.

Im running a web-based CMS, that cycles through a number of pages, and wanted to know if there is an auto reload code option ( not plug-in ) that can restart previous page when connection failed.

I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered: 
 
<ul><li>Connection Failed</li></ul> 
 
This means: 
 
<pre>

I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered: 
 
<ul><li>Connection Failed</li></ul> 
 
This means: 
 
<pre>

AFP client "connection failed 32" issue solved

I'm making this post because of the difficulty I had in troubleshooting this AFP error and hope someone will benefit from my finding.
I have a client whose server was responding with "connection failed 32" whenever anyone tried to connect to shares on the attached XRaid. The AFP log indicated entries like this:
Login admin
No matching key: admin
After much searching for hints on the forums I couldn't find any solutions. Some postings I read mentioned that the AFP problem was related to SCSI boards on their server. Not having one on our server I went after the nearest such item, namely Firewire. I finally solved the problem by unmounting the bank of 4 Firewire backup drives.
Although I have no idea why the AFP problem is related to the backup drives, it turned out that once I ran Disk Utility to repair the FW drives and remounted them, AFP worked once again. DU found "Directory name locked" on two of the drives and repaired them.
G4 Xserve Mac OS X (10.4.8) XRaid and Firewire backup drives

Hi apta
No matching key: admin
This seems to indicate a Kerberos key transfer of some sort that has not been recognised or was out of sync. Probably nothing to do with the actual problem which you have fixed. But that is what the log seems to be indicating to me.
Just a thought thats all

"Connection Failed" - Belkin access point

When trying to connect wirelessly on my Macbook to my Belkin access point, I enter my WPA and it just comes up with "Connection Failed"....Im running 10.5.5.
Cheers

I use an unprotected belkin point and that use to happen to me, then I realised I just had no signal - as in while its connecting i lifted it up like to get better reception.

Connect failed with DBLI_RC_LOAD_LIB_FAILED

Hi,
Server details: Win 2003 X64, CE 7.1, Oracle 10g
due to some OS level problem the server got stopped (SAP Instances). When i checked the log files
dev_icm log file
trc file: "F:\usr\sap\<SID>\J10\work\dev_icm", trc level: 1, release: "710"
sysno 10
<SID> <SID>
systemid 562 (PC with Windows NT)
relno 7100
patchlevel 0
patchno 84
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile F:\usr\sap\<SID>\SYS\profile\<SID>_J10_HOSTNAME
pid 4168
[Thr 4328] Thu Feb 12 17:53:45 2009
[Thr 4328] started security log to file dev_icm_sec
[Thr 4328] ICM running on: HOSTNAME
[Thr 4328] MtxInit: 30001 0 2
[Thr 4328] IcmInit: listening to admin port: 65000
[Thr 4328] MPI: dynamic quotas disabled.
[Thr 4328] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 5336] IcmProxyWatchDog: proxy watchdog started
[Thr 4328] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 4328] CCMS: Initalized shared memory of size 60000000 for monitoring segment.
[Thr 4328] CCMS: Checking Downtime Configuration of Monitoring Segment.
[Thr 4328] IcmInit: icm running without ABAP stack
[Thr 5340] IcmJSessCommThread started
[Thr 5344] IcmMplxThread started
[Thr 4328] IcmJsfAttach: attached to Java Startup Framework
[Thr 4328] IcmCreateWorkerThreads: created worker thread 0
[Thr 4328] IcmCreateWorkerThreads: created worker thread 1
[Thr 4328] IcmCreateWorkerThreads: created worker thread 2
[Thr 4328] IcmCreateWorkerThreads: created worker thread 3
[Thr 4328] IcmCreateWorkerThreads: created worker thread 4
[Thr 4328] IcmCreateWorkerThreads: created worker thread 5
[Thr 4328] IcmCreateWorkerThreads: created worker thread 6
[Thr 4328] IcmCreateWorkerThreads: created worker thread 7
[Thr 4328] IcmCreateWorkerThreads: created worker thread 8
[Thr 4328] IcmCreateWorkerThreads: created worker thread 9
[Thr 5400] IcmWatchDogThread: watchdog started
[Thr 5344] JNCMIHttpMsPutLogon: http port information not available
[Thr 5344] JNCMIP4MsPutLogon: p4 port information not available
[Thr 5344] JNCMIIIOPMsPutLogon: iiop port information not available
[Thr 5344] JNCMIHttpMsPutLogon: http port information not available
[Thr 5344] JNCMIP4MsPutLogon: p4 port information not available
[Thr 5344] JNCMIIIOPMsPutLogon: iiop port information not available
[Thr 5404] Thu Feb 12 17:53:48 2009
[Thr 5404] ISC: created 400 MB disk cache.
[Thr 5404] ISC: created 50 MB memory cache.
[Thr 5404] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /, active: 1
[Thr 5404] HttpExtractArchive: files from archive F:\usr\sap\<SID>\J10\exe/icmadmin.SAR in directory F:/usr/sap/<SID>/J10/data/icmandir are up to date
[Thr 5404] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin, active: 1
[Thr 5404] HttpSubHandlerAdd: Added handler HttpModHandler(slot=2, flags=12293) for /, active: 1
[Thr 5404] CsiInit(): Initializing the Content Scan Interface
[Thr 5404] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 5404] CsiInit(): CSA_LIB = "F:\usr\sap\<SID>\J10\exe\sapcsa.dll"
[Thr 5404] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=3, flags=12293) for /, active: 1
[Thr 5404] ICM running without ABAP
[Thr 5404] HttpSubHandlerAdd: Added handler HttpJ2EE2Handler(slot=4, flags=1060869) for /, active: 1
[Thr 5404] Started service 51000 for protocol HTTP on host "HOSTNAME"(on all adapters) (processing timeout=600, keep_alive_timeout=60)
[Thr 5404] Started service 51004 for protocol P4 on host "HOSTNAME"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
[Thr 5404] Started service 51007 for protocol IIOP on host "HOSTNAME"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
[Thr 5404] Started service 51008 for protocol TELNET on host "localhost"(only on this adapter) (processing timeout=60, keep_alive_timeout=30)
[Thr 5344] JNCMIHttpMsPutLogon: delete http logon information
[Thr 5344] JNCMIP4MsPutLogon: reset p4 logon information
[Thr 5344] JNCMIIIOPMsPutLogon: reset iiop logon information
[Thr 5344] JNCMITelnetMsPutLogon: reset telnet logon information
[Thr 5344] JNCMIHttpMsPutLogon: delete http logon information
[Thr 5344] JNCMIP4MsPutLogon: reset p4 logon information
[Thr 5344] JNCMIIIOPMsPutLogon: reset iiop logon information
[Thr 5344] JNCMITelnetMsPutLogon: reset telnet logon information
[Thr 5404] Thu Feb 12 17:53:59 2009
[Thr 5404] *** WARNING => IcmNetCheck: NiHostToAddr(www.doesnotexist.qqq.nxst) took 11 seconds [icxxman.c 5640]
[Thr 5404] Thu Feb 12 17:54:16 2009
[Thr 5404] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 17 seconds [icxxman.c 5660]
[Thr 5404] *** WARNING => IcmNetCheck: 2 possible network problems detected - please check the network/DNS settings [icxxman.c 5716]
[Thr 5344] Thu Feb 12 17:56:02 2009
[Thr 5344] JNCMIP4NodeAdd: node 109769750 joins the load balancing list
[Thr 5344] IcmJSessCommServiceJoin: server 109769750 started protocol P4 (active services: 1)
[Thr 5344] JNCMIIIOPNodeAdd: node 109769750 joins the load balancing list
[Thr 5344] IcmJSessCommServiceJoin: server 109769750 started protocol IIOP (active services: 3)
[Thr 5344] JNCMITelnetNodeAdd: node 109769750 joins the load balancing list
[Thr 5340] IcmJSessCommAttach: Attached to J2EE request queue <SID>_10_109769750_P4
[Thr 5344] IcmJSessCommServiceJoin: server 109769750 started protocol TELNET (active services: 7)
[Thr 5344] JNCMIP4MsPutLogon: set p4 logon port (port:51004) (lbcount: 1)
[Thr 5344] JNCMIIIOPMsPutLogon: set iiop logon port (port:51007) (lbcount: 1)
[Thr 5344] JNCMITelnetMsPutLogon: set telnet logon port (port:51008) (lbcount: 1)
[Thr 5344] Thu Feb 12 17:59:20 2009
[Thr 5344] JNCMIHttpNodeAdd: node 109769750 joins the load balancing list
[Thr 5344] HttpJ2EELbPut: server 109769750 started protocol HTTP, attached to request queue <SID>_10_109769750_HTTP
[Thr 5344] JNCMIHttpMsPutLogon: set http logon port (port:51000) (lbcount: 1)
[Thr 5344] Tue Feb 24 18:21:03 2009
[Thr 5344] *** ERROR => NiBufISetError: ErrGetAttr failed (rc=-2) for hdl 49 [nibuf.cpp 1243]
[Thr 5344] *** ERROR => MsINiRead: NiBufReceive failed (NIEINTERN) [msxxi.c 2811]
[Thr 5344]
[Thr 5344] *****************************************************************************
[Thr 5344] *
[Thr 5344] * ERROR The message received isn't from a message server.
[Thr 5344] * Are you really connected to the message server?
[Thr 5344] * Please check your connection parameters.
[Thr 5344] * (HOSTNAME / 3911)
[Thr 5344] *
[Thr 5344] * TIME Tue Feb 24 18:21:03 2009
[Thr 5344] * RELEASE 710
[Thr 5344] * COMPONENT MS (message handling interface, multithreaded)
[Thr 5344] * VERSION 4
[Thr 5344] * RC -29
[Thr 5344] * MODULE msxxi.c
[Thr 5344] * LINE 2819
[Thr 5344] * COUNTER 3
[Thr 5344] *
[Thr 5344] *****************************************************************************
[Thr 5344]
[Thr 5344] *** ERROR => MsIReadFromHdl: NiRead (rc=NIEINTERN) [msxxi.c 1966]
[Thr 5344] JNCMIMsConnBrokenCallback: Message server connection broken
[Thr 5344] IcmJncmConnBrokenCallback called
[Thr 45932] JNCMIReconnectFunc: Wait 3600 sec for message server reconnect
[Thr 45932] JNCMIReconnectFunc: Wait 30 sec for consistent cluster reconnect
[Thr 45932] Tue Feb 24 18:21:04 2009
[Thr 45932] *** ERROR => MsIAttachEx: NiBufConnect to HOSTNAME/3911 failed (rc=NIECONN_REFUSED) [msxxi.c 773]
[Thr 45932] Tue Feb 24 18:21:06 2009
[Thr 45932] *** ERROR => MsIAttachEx: NiBufConnect to HOSTNAME/3911 failed (rc=NIECONN_REFUSED) [msxxi.c 773]
[Thr 45932] Tue Feb 24 18:21:09 2009
[Thr 45932] *** ERROR => MsIAttachEx: NiBufConnect to HOSTNAME/3911 failed (rc=NIECONN_REFUSED) [msxxi.c 773]
[Thr 45932] Tue Feb 24 18:21:13 2009
[Thr 45932] *** ERROR => MsIAttachEx: NiBufConnect to HOSTNAME/3911 failed (rc=NIECONN_REFUSED) [msxxi.c 773]
[Thr 4328] Tue Feb 24 18:21:15 2009
[Thr 4328] Deactivated service 51000 for protocol HTTP on host: "HOSTNAME"(on all adapters) (timeout=60)
[Thr 4328] Deactivated service 51004 for protocol P4 on host: "HOSTNAME"(on all adapters) (timeout=30)
[Thr 4328] Deactivated service 51007 for protocol IIOP on host: "HOSTNAME"(on all adapters) (timeout=30)
[Thr 4328] Deactivated service 51008 for protocol TELNET on host: "localhost"(only on this adapter) (timeout=30)
[Thr 5400] IcmWatchDogThread: Shutdown request received
[Thr 5400] IcmConnCancel: Connection (id=7/38910) canceled manually
[Thr 5400] *** IcmWatchDogThread: exit thread ***
[Thr 5340] *** IcmJSessCommThread: exit thread ***
[Thr 4328] IcmConnCancel: Connection (id=7/38910) canceled manually
[Thr 4328] IcmConnCancel: Connection (id=2/5856) canceled manually
[Thr 4328] Tue Feb 24 18:21:16 2009
[Thr 4328] Removed service 51000 for protocol HTTP on host: "HOSTNAME"(on all adapters) (timeout=60)
[Thr 4328] Removed service 51004 for protocol P4 on host: "HOSTNAME"(on all adapters) (timeout=30)
[Thr 4328] Removed service 51007 for protocol IIOP on host: "HOSTNAME"(on all adapters) (timeout=30)
[Thr 4328] Removed service 51008 for protocol TELNET on host: "localhost"(only on this adapter) (timeout=30)
[Thr 4328] IcmJsfDetach: detach from Java Startup Framework
[Thr 4328] *** ICM shutdown completed (pid: 4168) ***
R4trans -d log file
4 ETW000 date&time : 27.02.2009 - 11:33:19
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 27 11:33:22 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 2597 0.002597
4 ETW000 [dev trc ,00000] using "F:\usr\sap\SID\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 16 0.002613
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 8 0.002621
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 12 0.002633
4 ETW000 [dbcon.c ,00000] *** ERROR => Codepage mismatch between kernel (ASCII) and DBSL shared library 'dboraslib.dll' (UNICODE)
4 ETW000 42 0.002675
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
Please Guide me
Mahesh

Hi Mahesh,
There are 2 dates one is 12 and other 24th. I think this is a network failure issue.
>
Mahesh Chedde wrote:
> [Thr 5344] Thu Feb 12 17:59:20 2009
> [Thr 5344] JNCMIHttpNodeAdd: node 109769750 joins the load balancing list
> [Thr 5344] HttpJ2EELbPut: server 109769750 started protocol HTTP, attached to request queue <SID>_10_109769750_HTTP
> [Thr 5344] JNCMIHttpMsPutLogon: set http logon port (port:51000) (lbcount: 1)
>
> [Thr 5344] Tue Feb 24 18:21:03 2009
> [Thr 5344] *** ERROR => NiBufISetError: ErrGetAttr failed (rc=-2) for hdl 49 [nibuf.cpp 1243]
> [Thr 5344] *** ERROR => MsINiRead: NiBufReceive failed (NIEINTERN) [msxxi.c 2811]
> [Thr 5344]
>
Regards,
Kalyan

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

Secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) PLEASE HELP ME!!

I have gone to this website almost everyday for years and I have not changed anything in my internet settings, but now I'm getting this message: secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) The only thing I KNOW I did differently, was I installed a CAC reader to my computer, since then, this has been happening. Is there a setting I can change?? E-mail is: [email protected] Thanks! Megan

There were recently several users getting this error code who use AVAST 2015. If you recently got that program, please see:
* [https://support.mozilla.org/questions/1029578 Can NOT access https://www.google.com for google voice, mail etc.]
* [https://support.mozilla.org/questions/1028985 Avast Forum connection failed - works in Chrome etc.]
* [https://support.mozilla.org/questions/1028190 Since last FF update I can't sign out of Yahoo and when I close FF it tells me it has crashed.]

AirPort Extreme Connection Failed with Hard Disk EVERYDAY!

This is getting really annoying now, I have currently three x 2TB hard drives plugged into the AirPort Extreme via a 4 Bay Enclosure.
Everyday, now and then, the connection fails. Meaning it wont let me backup and says "Couldn't find disk". And nor can I access the hard drives on the AirPort Extreme with finder, it just says Connection Failed. Nor can I open up airport utility, it says Reading Settings and then it says "input password to check settings on AirPort Extreme" so I put in the password and it loops over again.
Only way I can fix it is unplugging and pugging the AirPort Extreme back in.. WHY!!!!!!!!!?????? The AEBSn is in my basement along with the drives, it's very very very annoying. How do I fix it?
ALSO I NOTICED THAT THE INTERNET ONLY WORKS ON MY MACBOOK AIR and DOES NOT WORK ON MY WINDOWS 7 MACHINE, when this happens.

Exact same problem here. It used to really work well, Time Machine and all -- some Airport Extreme firmware revisions back. But whether it's changes to firmware or something else I don't know. It just started dropping the share point all the time and I'd have to restart or power cycle the Extreme to get it back. The shared printing to an HP Laserjet 1200 connected to the Extreme consistently works, never fails from any Mac in the house.
My solution: I gave up. I have a good high-powered hub -- the one I was using for printer and hard drive on the Extreme -- that can consistently support two externally powered USB drives. (I already have another external hard drive connected to my MacBook Air because my iTunes library finally outgrew the Air's built-in drive.) So I took the hub from the Extreme, plugged it in to the Air, connected my iTunes library hard drive and the storage/Time Machine hard drive to the hub.
Honestly, I prefer it this way. Printing works great via the Extreme USB connected printer. The network connection locally and to the Internet works great. Now Time Machine consistently works with the drive locally connected. I wouldn't even trade it for a Time Capsule because I'd still be dealing with Wi-Fi speeds. Doing a full Time Machine backup, about 107 GB, to the networked Time Machine volume took about 9 hours over pure 802.11n. Incremental backups and indexing those backups sometimes slowed my Air to a crawl. Connected via the hub to the Air the full backup took 90 minutes and incrementals I don't even notice are running. I rarely have reason to retrieve things from Time Machine, but just going into it takes like no time now. As fast or faster than starting other applications. And when I go mobile with the Air, I just eject the external hard drives and pull the hub's USB connector.
Sorry I don't have anything in the way of a real solution. But I'd long ago switched the other Macs in the house to locally connected external USB drives for Time Machine -- and nobody makes critical changes to the data on those Macs on a regular basis, anyway.
So I just got sick of pulling my hair out, I was the only one using the Airport Extreme networked drive for Time Machine or anything else. I threw in the towel. I spend two or three times the money on Macs than "comparable" Windows computers would cost me and I do that because I'm not by trade a technician. I just want to do my work, the part of it requring a computer, with no hassles. I can learn these technical troubleshooting things but that gets in the way of what I really do for work. So when I have my pricey Mac not properly connecting to my pricey Airport Extreme and I've spent hours and hours reconfiguring and trying to suss it out, I'll happily concede the battle and get back to the rest of my life.

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

Decision Service calls failing with connection refused

Hi All,
Breifing of the bpel process - Async bpel process XX_BPEL_ASYNC_002 calls decision services and a sync bpel process XX_BPEL_SYNC_001.
We have moved to cluster 10.1.3.5.0 from 10.1.3.3.0 and the deployement of the bpel process and the decision service done on two nodes i.e., node51 and node55.
But the bpel process is able to call the decision service only when the node 51 is UP and running, but if node 51 is down and node 55 is up and running it is failing with connection refused error. It is also working when 55 is DOWN and 051 is UP.
the exact error is:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused.
We are using file based repository.
It is failing when it tries to call particular url:
http://loadbalancerurl:7777/orabpel/domain001/XX_BPEL_ASYNC_002/1.0/decisionservices.decs
Can anyone please help me or advice me for finding some solution.
Thanks
Sreejit

Hi Fatsah,
It has been a while since we resolved this problem. But these were the basic steps that we had taken.
The receiver was configured a File adatpter with FTP:
Port: 10021
Connection security : FTPS (FTP using SSL/TLS) for Control and Data Connection
Command Order: AUTH TLS,USER,PASS,PBSZ,PROT
Problem: The message was blocked in our firewall.
FTPS in this case used 10021 as the control port and the firewall allowed to pass the control request.
Once the connection was accepted at the control level, it generated a random port number to pass data on the channel.
This random port number was blocked in the firewall.
We monitored the data port numbers generated at firewall. Then we configured the firewall to open any port number between the specific IP addresses of the sender and the receiver. That resolved the problem.
Hope this helps!
Please give points if this is helpful.
Thank you.
Dharmasiri Amith

*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade

Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
Debaditya

Hi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS

Service.connect fails occasionally with strange error

I've created an application which checks an POP3 mailbox every minute to check if there are any messages and if there are, it processes the e-mails according to some rules.
This works fine most of the time but every now and then the application fails. I can see two different error messages. The first I can understand but the second is very strange. The username and password haven't changed so it should be alright.
The problem with this is that if I try to connect to the server from Outlook or any other e-mailclient it works fine even at times when my application don't.
Have anybody seen anything like this?
Stacktrace:
Connect failed;
nested exception is:
 java.net.ConnectException: Connection timed out: connect
javax.mail.MessagingException: Connect failed;
nested exception is:
 java.net.ConnectException: Connection timed out: connect
 at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
 at javax.mail.Service.connect(Service.java:233)
 at javax.mail.Service.connect(Service.java:134)
 at biz.MailMethods.readEmail(MailMethods.java:167)
 at application.MailReaderTask.run(MailReaderTask.java:113)
 at java.util.TimerThread.mainLoop(Timer.java:432)
 at java.util.TimerThread.run(Timer.java:382)
EOF on socket
javax.mail.AuthenticationFailedException: EOF on socket
 at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:104)
 at javax.mail.Service.connect(Service.java:233)
 at javax.mail.Service.connect(Service.java:134)
 at biz.MailMethods.readEmail(MailMethods.java:167)
 at application.MailReaderTask.run(MailReaderTask.java:113)
 at java.util.TimerThread.mainLoop(Timer.java:432)
 at java.util.TimerThread.run(Timer.java:382)Code:
try {
Properties props = new Properties();
Session session = Session.getDefaultInstance(props, null);
Store store = session.getStore("pop3");
store.connect(server, username, password);
Folder folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message messages[] = folder.getMessages();
String from = null;
MimeMessage mm = null;
for (int i = 0; messages != null && i < messages.length; i++) {
 mm = (MimeMessage) messages;
from = ((InternetAddress)mm.getFrom()[0]).getAddress();
if ("[email protected]".equals(from)) {
} else {
messages[i].setFlag(Flags.Flag.DELETED, true);
folder.close(true);
store.close();
} catch (Exception e) {
e.printStackTrace();

HI
I have a similar scenario whr the connect fails ..
I shal be gr8ful to u, if u cud let me know how u resolved this problem
my email id is [email protected]
with regards
Kalyan

Every time i try to load a website for my school which i know is secure a page that says secure connection failed pops up with (Error code: ssl_error_internal_error_alert) how do i get past this?

it also says : Secure Connection Failed
An error occurred during a connection to sis.granby.k12.ct.us.
Peer reports it experienced an internal error.
(Error code: ssl_error_internal_error_alert)
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
 reference: https://support.mozilla.org/en-US/questions/982532#answer-520145
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Telnet 25 with connect failed

Similar Messages

Maybe you are looking for