Telnet can't figure out route to host, but only on certain ports?
This only occurs under 10.5. In 10.4.11, I can hit the server on both ports through telnet.
telnet <server> 510
Trying <server>...
telnet: connect to address <server>: Connection refused
telnet: Unable to connect to remote host
telnet <server> 80
Trying <server>...
Connected to <server>.
Escape character is '^]'.
fetch
HTTP/1.1 400
Date: Sun, 06 Jul 2008 03:06:15 GMT
Content-Type: text/html
<html><head><title></title></head>
<body>
fetch: 0
</body></html>
Connection closed by foreign host.
Here's the strangest part:
ping <server>
PING <server> (ip): 56 data bytes
ping: sendto: No route to host
^C
--- <server> ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
How come it can figure out the route when using port 80, but not when using port 510? And is the inability to figure out the route the reason why Wireshark shows ZERO outgoing packets on port 510 when it fails to connect?
And why only on certain IPs? If I use "edu.yorku.ca", I can connect via telnet on both 80 and 510.
orangekay wrote:
So it works if you supply a FQDN but not an IP? Are you certain that the IP you're using is valid? There may be some DNS trickery going on behind the scenes.
No, it only connects when I hit the server on port 80. Using IP or FQDN doesn't seem to make a difference.
If I try to use Network Utils to do a trace route, it too says no route to host.
I've got a G4/ppc running 10.4.11 attached to the same router, and it has no issue hitting the server on any port, and can do a trace route as well.
Similar Messages
-
I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
And how am I supposed to answer my own question?
I can't figure out how to respond so ill go this route. I can't seem to find the button/place to which I can choose, to turn on a hot spot. I have been through every option and searched to no avail. Could it be that my iPhone 4 is not hotspot capable as I was led to believe by the apple sales associate? Is there an app I can find to make my phone a wifi hotspot? So I can get on the Internet to view the pages I want that require adobe which this piece of **** software monger won't even support?
-
I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
My podcast isn't updating and I can't figure out why, please help?
Hi everyone,
I'm at my wits end and I can't figure out what's wrong with my podcast in regards to iTunes.
We have a website we update that originally iTunes was pointed at (http://www.whydaddydrinks.net/?feed=rss2) and then iTunes started having issues with not updating. Recently we tried changing the feed of the podcast to the RSS feed for our podcast hosting account at Podbean (http://whydaddydrinks.podbean.com/feed/) and it's running into the same issue.
I've checked FeedValidator for both feeds and they're fine (http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.whydaddydrinks.net%2F%3F feed%3Drss2 and http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwhydaddydrinks.podbean.com%2 Ffeed%2F). I've clicked the links to the .mp3 files and they play off the web, so, in theory, there shouldn't be any issue as far as I know; Episode 13 shows up in iTunes but dosn't appear to be connected to the file and Season 2 Episode 1 doesn't show up at all.
Can any of you offer any suggestions as to what the heck is going on?Your Store page is at https://itunes.apple.com/gb/podcast/your-book-is-why-daddy-drinks/id515363310?mt =2
This is using the feed at http://www.whydaddydrinks.net/?feed=rss2 so the other feed URL you posted is irrelevant.
This feed has episodes up to 13 which contain playable media, and these all show in the Store and when subscribing. However the URL for the media file for episode 13 is
http://media40.podbean.com/pb/89ea6f327345e33833ff09885e48b8a1/50e904db/data2/bl ogs48/462271/uploads/YBIWDD_Episode13.mp3
and there is no file at this address. The previous episode downloads OK.
This feed contains two later episodes but neither has an 'enclosure' tag containing the URL of a media file and so the episodes don't show in iTunes. You are using WordPress to make your feed, and this problem arises a lot - it presumably means that you have failed to do something you need to do in WordPress to get the media file into the feed, but I can't advise on specifics of WordPress.
The other feed has one of these two episodes, and there the latest episode does have an 'enclosure' tag and the episode appears when subscribing manually; however as I say this feed is not in use by the Store.
So you need to do with the original feed whatever it was you did with the new feed to get the episode into the Store, and you need to chase the missing media file for episode 13.
If you want to move the Store to using the Podbean feed you need to follow the procedure outlined here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Note that the title in the Podbean feed is 'whydaddydrinks' which many not be what you want. -
Please help, I can't figure out how to use the cable modem...
I'm visiting my sister in Baltimore, Maryland for about 3 weeks, and I want to set up the internet on my macbook so i don't have to keep using her powerbook g4. She has a Motorola Comcast Cable Modem set up for her powerbook, but I can't figure out how to find the info about her connection so I can copy it down into my computer. I keep going to her system preferences section and clicking the network button, but none of the various internet connections shown are actually the one she uses to connect. Please tell me where I can find her cable provider's info in her powerbook and where, in my macbook, i can enter this information and get on the internet.
p.s. i don't know if this is necessary info, but with the motorola cable modem came an installation disk for if you wanted to use the usb drive cord instead, but that disk isn't even read properly in my macbook. like, it lets me open up the disk and see all the files on it but it doesn't automatically start up an installation wizard so i really have no way of installing the items on the disk.well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.
-
I recently deleted iTunes off my computer by accident, when I reinstalled it I got the new version and I can't figure out how to get my music to store on my iTunes to transfer from my iPhone to my iTunes. I goal is to get my iPod filled with the music that I have stored on my iPhone and figured the only way to do so is to use iTunes as my transfer hub. Any suggestions?
Wow you're kind of a iTunes bully. Dude the reason I am asking for advice and help is I am completely computer ********. If I knew the answer I wouldn't be asking. Anyways. Question to anyone else.
If I have no music on my iTunes at all and no music on my computer, hard drive or any other version of storage yet there is a playlist on my iPhone. While my iPhone is plugged into my PC and my iTunes is up, is there a way to swap my playlist from my iPhone to my iTunes? Directly? Without downloading some new media source or backing up my old media source from my history. The reason everything was deleted (iTunes and media source) was due to the size of everything and space it was requiring. I am simply trying to get 233 songs from A to B.
I have tried magic but it is not working.
<Edited By Host> -
Can't Figure Out If My Macbook Can Upgrade , currently running 10.6.8 and wanted to get latest version os but can't upgrade current os Please Help !!!! Hardware Overview:
Model Name: MacBook Air
Model Identifier: MacBookAir3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBA31.0061.B01
SMC Version (system): 1.67f4
Serial Number (system): C0*******DQX
processor 1.4 ghz
mem 2gb 1067 mhz ddr3
startup disk Macintosh HD
<Edited by Host>You can upgrade to Mountain Lion
Upgrading from Snow Leopard to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
Newbie for the life of me can't figure out where in contact.php you tell it where to send form?
Thx for any help.
I know it's got to be so obbvious.
Why would you send in php vs html?
<?php
if(!$_POST) exit;
$email = $_POST['email'];
//$error[] = preg_match('/\b[A-Z0-9._%-]+@[A-Z0-9.-]+\.[A-Z]{2,4}\b/i', $_POST['email']) ? '' : 'INVALID EMAIL ADDRESS';
if(!eregi("^[a-z0-9]+([_\\.-][a-z0-9]+)*" ."@"."([a-z0-9]+([\.-][a-z0-9]+)*)+"."\\.[a-z]{2,}"."$",$email )){
$error.="Invalid email address entered";
$errors=1;
if($errors==1) echo $error;
else{
$values = array ('name','email','message');
$required = array('name','email','message');
$your_email = "[email protected]";
$email_subject = "New Message: ".$_POST['subject'];
$email_content = "new message:\n";
foreach($values as $key => $value){
if(in_array($value,$required)){
if ($key != 'subject' && $key != 'company') {
if( empty($_POST[$value]) ) { echo 'PLEASE FILL IN REQUIRED FIELDS'; exit; }
$email_content .= $value.': '.$_POST[$value]."\n";
if(@mail($your_email,$email_subject,$email_content)) {
echo 'Message sent!';
} else {
echo 'ERROR!';
?>Thanks. I'm working with different hosts and I guess thats where the confusion for me is coming in. In bluehost, I simply submit my form through form action to http://www.bluehost/bluemail. With the php form construction it 's form action is contact.php. Does this mean that the server I'm working with will uinderstand how to process contact.php and where to send it based on paramaters previously submitted? Or do I instruct the server via the php form? Thanks again
Date: Wed, 8 Feb 2012 13:50:11 -0700
From: [email protected]
To: [email protected]
Subject: Newbie for the life of me can't figure out where in contact.php you tell it where to send form?
Re: Newbie for the life of me can't figure out where in contact.php you tell it where to send form?
created by mhollis55 in Dreamweaver - View the full discussion
The reason why this is done in php is because php is server-side scripting. It's telling your server to do stuff. HTML doesn't tell your server anything, it tells the client (the web browser loading it) to do things. Only your server can send an email.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4194407#4194407
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4194407#4194407. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?
is it your imac?
is it your your router's name?
are you by any chance connected to another wifi router then your own because the other one was open and not password protected? -
Can't figure out how to use home sharing
Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help. -
Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Can't figure out what is the code
Hi
I got following macro that will help me to run certain transaction.
I just can't figure out where comments ends and where code starts so I was unable to run it for like 3 hours now.
In other words
I am trying to use Excel Macro that will get to active transaction in SAP and do waht I have recorded.
'SAPGUI Macro for updating SAP from Excel data 'Prerequisites: '1. Script Recording and Playback from the SAPGui must be enabled by admin '2. The Excel list must be set up from top left corner of a worksheet '3. The worksheet with data must be the active sheet '4. There is no error handling. Build it yourself! '5. The script will update the active (current) SAP transaction'Instructions for use 'Record a macro of your update actions. 'Paste the session.findById stuff between the <== and ==> markers'Edit the literal values and replace with Trim(CStr(objSheet.Cells(x, y).Value)) 'where x and y are the row and column counters'Open up your Excel sheet with data (row 1 is ignored here) 'Fire the macro! '===========BEGIN BOILERPLATE=================== REMSet up connection to the SAP screen: If Not IsObject(application) Then Set SapGuiAuto = GetObject("SAPGUI") Set application = SapGuiAuto.GetScriptingEngine End If If Not IsObject(connection) Then Set connection = application.Children(0) End If If Not IsObject(session) Then Setsession = connection.Children(0) End If If IsObject(WScript) Then WScript.ConnectObject session, "on" WScript.ConnectObject application, "on" End If REMSet up connection to the Excel data to be keyed into SAP: Dim objExcel Dim objSheet, intRow, i Set objExcel = GetObject(,"Excel.Application") Set objSheet = objExcel.ActiveWorkbook.ActiveSheet session.findById("wnd[0]").maximize
'===========END BOILERPLATE=====================
'REM Example: Mark material for deletion in Plant using MM06 For i = 2 to objSheet.UsedRange.Rows.Count 'Assuming there is a header rowREM Find a cell and put its value in: REM Note: The section of the Script shown below can be recorded ' and edited to pick data from the Excel sheetstrCN = Trim(CStr(objSheet.Cells(i, 1).Value)) strWerks = Trim(CStr(objSheet.Cells(i, 2).Value)) '<== session.findById("wnd[0]/usr/ctxtRM03G-MATNR").text = strCN session.findById("wnd[0]/usr/ctxtRM03G-WERKS").text = strWerks session.findById("wnd[0]/tbar[0]/btn[0]").press session.findById("wnd[0]/usr/chkRM03G-LVOMA").selected = false session.findById("wnd[0]/usr/chkRM03G-LVOWK").selected = truesession.findById("wnd[0]/tbar[0]/btn[11]").press 'session.findById("wnd[0]/tbar[0]/btn[0]").press '==> NextOk macro works and triggers actions from recorder. I was doing it with hope I will select data in SAP and paste in Excel AND/OR export file from SAP with data.
If I record select column and then copy it. Script is recorded until selection . It ignores copy (i tried use mouse right click and copy AND manual alt+F12 and then copy from context menu)
When I export recorder does open export window but does not writes the line relevant to clicking save.
I found such bits
'Choose the export format
session.findById("wnd[1]/usr/subSUBSCREEN_STEPLOOP:SAPLSPO5:0150/sub:SAPLSPO5:0150/radSPOPLI-SELFLAG[1,0]").select
session.findById("wnd[1]/tbar[0]/btn[0]").press
'Choose the export filename
session.findById("wnd[1]/usr/ctxtDY_FILENAME").text = "test.txt"
session.findById("wnd[1]/usr/ctxtDY_PATH").text = "C:\Temp\"
'Export the file
session.findById("wnd[1]/tbar[0]/btn[0]").press
But they dont seem to be relevant to my previous macro.
Any quick fix to get data out of Excel -
I keep multiple photos in a desktop folder to be quickly accessed by using Preview. But when I try to open ONE photo, it opens multiple photos. Can't figure out how to display just the single one that I select. OS 10.7.2
This is the resume feature of Lion. The last state of the application is saved when quitting (i.e last pictures viewed in Preview, last videos viewed in Quicktime etc).
You can switch it off for Preview by copy and pasting the following in to the terminal application
defaults write com.apple.Preview NSQuitAlwaysKeepsWindows -bool false -
How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?
If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.
Maybe you are looking for
-
I bought the camera connection kit at the same time as my iPad, I understood that there was no provision for connecting compact flash cards other than by connecting the camera directly to the iPad. I was not keen on that idea as it would add drain to
-
I am trying to open up a DVD with photos on it, but I only get the message that its a "blank dvd." Please help!
-
Firmware versions in replacement phone
Hi there all. I have a small problem, or at least some questions. I originally got a new E90 three weeks ago and just after I got it I ran software updater and it was updated to version 7.40.12. Not this phone had problems with the screen not only to
-
I just upgraded to QT Pro so that I could do some image sequence stuff. I load a sequence, set the frame rate and get a white screen following a microsecond blip on the screen. I have tried with one, two, three etc images and the result is the same e
-
Is there a variable that contains the current report name ?
Hi: I'm trying to log certain data to an audit table when users run BI Publisher reports. I have the BI Publisher user name from xdo_user_name but I'd like to get the name of the report that user is executing as well. Is that an xdo variable or somet