Telnet cannot connect to Remote Computer

When I telnet my localhost it works completely fine..
But It's not able to connect to Remote Host
It says Unable to Connect to Remote Host, Operation Timed Out
But my Remote Laptop is able to connect to this system perfectly...
I don't understand where's the issue.
Any Help ??

Do you mean, you can access the target computer using the other computer and not the
one you’re on right now? Can you ping the target computer using that computer
and vice versa? Just make sure that the computers are pinging each other to
ensure that they are communicating.

Similar Messages

Cannot connect to remote computer

Hi all, I've spent a lot of time trying to figure this out, would appreciate any help as I'm new to ARD, (3.3.2 version).
Here goes... I have 5 Macs on my home network, and have had very little problem connecting and controlling them from ARD. My problems start when I try to connect to my not-to-computer-savvy relatives elsewhere.
The first one is running a new iMac behind an airport extreme, I have ticked thier Remote Management box and opened the ARD ports on the extreme and I think I have correctly set up a static IP address of 10.0.1.3, on the 'configure IPv4' 'using DHCP with manual address'. I have then asked that user to give me his IP address from 'http://www.myipaddress.com' and this is the address I type into ARD - Scanner - Network Address. However this will not work, I cannot 'see' them or let me verify the user when I try to 'control' of 'observe'.
The second computer is behind a 'Linksys WAG 54G2', so I'll need to forward the ports like this.. http://portforward.com/english/routers/portforwarding/Linksys/WAG54G2/Apple_RemoteDesktop.htm
I have also tried to 'Ping' without success both these computers using 'Network Utility'
Very frustrated. Any help appreciated.
Max

Do you mean, you can access the target computer using the other computer and not the
one you’re on right now? Can you ping the target computer using that computer
and vice versa? Just make sure that the computers are pinging each other to
ensure that they are communicating.

Cannot connect Playbook to computer. Tried all fixes.

Hey,
since a few weeks my PlayBook just cannot connect to my computer. The desktop software sees it but doesn't mount it, nor can it access files.
I have seen fixes about TCPIP NetBios Helper service not running or anti-virus. Nothing helps. I can see the network connection in "Manage Adapters" but that doesn't seem to help.
Is there any fix planned? The Playbook is now useless.
I am on Win7x64.
I have tried uninstalling and reinstalling the software.
Solved!
Go to Solution.

Hey,
thanks for your reply, but you can trust me that I tried everything I was able to find here to fix the issue.
I have found the fix myself now.
The service "Workstation" was disabled and once I started it, the PlayBook instantly connected and everything works fine. No driver issues, no "Client for Windows" missing issues, no TCP-IP Helper issues. It was something completely undocumented.
Find the Service under Services in Windows 7 (just type into the start button search)
Workstation - Creates and maintains client network connections to remote servers using the SMB protocol. If this service is stopped, these connections will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start.
BlackBerry should add this to the KnowledgeBase and document their dependencies properly.

IPod Nano 5th generation cannot connect to the computer

My Nano 5th generation cannot connect to my computer when the device is connected to a USB cord. I have an existing library which I have synced to numerous times but all of a sudden, the iPod does not connect using the USB cord. I've tried changing ports on the computer but to no avail. I share the computer with another user who has a totally different library (their's is an iPod Touch) and there is no problem connecting this iPod Touch to the computer and iTunes library. I cannot figure out why the Nano 5th generation is not connecting by way of the USB cord. Somebody please help me

Have you tried plugging the iPod into a different USB port? Sometimes this can fix the problem of a device not being seen by a computer.
And i share you a column about [iPod Transfer|http://www.softwarebbs.com/wiki/IPod_Transfer]. This has worked perfectly for me everytime I've tried it.
Hope it can do you a favor.

Using different credetial to connect to remote computer to get Cert information

I am using following function to get cert details from remote computers. How do I change it to accept credentials to connect to remote computer?
PS : Remote computers are windows 2003 computers without PowerShell installed on it.
function Get-Cert( $computer=$env:computername ){ $ro=[System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $lm=[System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store=new-object System.Security.Cryptography.X509Certificates.X509Store("\\$computer\my",$lm) $store.Open($ro) $store.Certificates}Get-Cert ServerA
-Edatha-

Certainly. Here's a quick example that uses the PowerShell registry provider as a quick an easy way to enumerate the subkeys of HKLM\Software\Microsoft\SystemCertificates\MY\Certificates\ , and to read the Blob value as a byte array. In your
case, you'd probably want to look into using something like WMI's StdRegProv class to accomplish the same thing.
Once you have the byte array, just pass it to the constructor of X509Certificate2. (Note the unary comma in that constructor call; we're binding an object to the -ArgumentList parameter of New-Object, and when you're calling constructors that take
a single array argument, you need the comma.)
Get-ChildItem HKLM:\SOFTWARE\Microsoft\SystemCertificates\MY\Certificates |
ForEach-Object {
$byteArray = (Get-ItemProperty -Path $_.PSPath -Name Blob).Blob
$certificate = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2(,$byteArray)
$certificate

I have bought music on my ipad and want it in my iphone. I cannot connect to a computer but is there anything I can press in the phone for the music to download?

I have bought music in my ipad and want it on my iPhone also. I cannot connect to a computer and thought there was something I could press on the iPhone to get the music on all my devices.

Re-download music on the iPhone using the Purchased sections of iTunes app, it's in the bottom right corner under the More menu.
Note for the future: Settings > iTunes and App Store > (Automatic Downloads) Music > On

My ipod touch passcode is locked and i cannot connect to the computer last synced with

My ipod touch passcode is locked and I cannot connect to the computer last synced with

Place the iPod in recovery mode and then restore on any computer with iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Cannot connect VIA Remote Desktop to Windows 8.1 on a virtual machine

I have Windows 8.1 Enterprise running in a Hyper-V VM. For some reason I cannot connect to the VM using remote desktop. I am using a Microsoft account and remote desktop is enabled and my account has access. I am able to see the VM under
networks and access shared folders. The error I am getting is "Remote Desktop can't connect to the remote computer....".
Any ideas?

My account has access to RDP. The firewall rule to allow RDP was missing the permission for public networks. After this change the RDP client can find the computer and I can get in. Yay!
Thanks for the tip to check the firewall.

JDBC connect from remote computer fails

Hi all,
I have successfully installed the XE server and I can connect over JDBC from clients running locally on the machine where the XE server is installed.
However when I try to connect from a remote computer using the same client I get an error saying: The Network Adapter could not establish the connection
I can ping the machine with XE installed and all firewalls on the machines are turned off.
Any ideas on the subject of JDBC remote connect to XE server? Or is it simply that it is not supported?
Appreciate all the help I can get.
Thanks,
/Anders

On my machine I have the listener bound to local interface.
Listener.ora has hostname in it, and this is the listener status:
As status shows the hostname is resolved to localhost, on this machine I am unable (with this configuration) to share the db to other machines (I do not have oracle client on my other pc, but telnet is unable to connect to port 1521).
Changing hostname to ipaddres solves.
[andrea@bones ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Beta on 15-DEC-2005 21:28:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bones)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Beta
Start Date                15-DEC-2005 21:28:40
Uptime                    0 days 0 hr. 0 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
[andrea@bones ~]$

CF8 / MySQL 5 - Cannot connect to remote datasource

Hi all,
i'm using CF8 on my web server and i'm trying to connect to a
remote MySQL datasource. Ive doubled checked my settings and ive
even got my web developer to check the settings and they are all
correct. My developer can connect to the database no problem, so i
know it must be an issue with my CF server.
this is a complete blocker, we cant continue with the
development until we fix this.
this is the error i get when i try to verify the db
connection:

ok so if type at the command promt this:
telnet mysql_xx.xx.xx.xx 3306 i get this:
Connecting To mysql_xx.xx.xx.xx...Could not open connection
to the host, on port 3306: Connect failed
if i type this:
telnet mysql_xx.xx.xx.xx 3306 telnet mysql_Xname.com 3306
i get this:
C:\Documents and
Settings\Administrator.ALLIED-WEB-01>telnet mysql_xx.xx.xx.xx
3306 telnet mysql_Xname.com 3306
telnet [-a][-e escape char][-f log file][-l user][-t
term][host [port]]
-a Attempt automatic logon. Same as -l option except uses
the currently logged on user's name.
-e Escape character to enter telnet client prompt.
-f File name for client side logging
-l Specifies the user name to log in with on the remote
system.
Requires that the remote system support the TELNET ENVIRON
option.
-t Specifies terminal type.
Supported term types are vt100, vt52, ansi and vtnt only.
host Specifies the hostname or IP address of the remote
computer
to connect to.
port Specifies a port number or service name.
what's this telling us? did i type it right?

Cannot Connect to Remote Named Instance of SQL Server

We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then \INSTANCE01 and \INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to
either of the additional named instances (\INSTANCE01 or \INSTANCE02).
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.com\INSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
HOWEVER - if I try to connect to "sql.domain.com\INSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.
The following items have been verified:
SQL Server Browser is running on the remote SQL Server
Windows Firewall has been disabled on the SQL Server
TCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewall
UDP Port 1434 has been opened up on the remote destination's firewall
Thoughts? Did I miss something?

Hi brgnewman,
Use computername\instancename to connect to the database engine. Please try again. I think the configuration is OK.
Refer to Connecting from Another Computer:
http://msdn.microsoft.com/en-us/library/ms345343.aspx.
Thanks.
Maggie Luo
TechNet Community Support

ITunes cannot connect to remote speakers / Airport Express

Hi Guys
This is a quick post with a problem & solution.
I've been searching for ages tonight to find a solution to my problem:
'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
So, just incase some people are still looking for an answer:
What I did...
1. Go to System Preferences, Network.
2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
3. Open iTunes, go to preferences.
4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
5. Close iTunes
6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
7. Connect to remote speakers worked!

thanks Simius,
I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
in the old system one could turn it off completely, now the off button is gone.
there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
anybody has any idea?
thansk a lot
D.

Connecting to Remote Computer

Does Mac have the capability to connect to a Windows based remote computer? For example, I'm planning on purchasing a MacBook Pro soon and I need to know if I will be able to connect remotely to my office computer which is Windows based.
Any help would be great.

The answer depends. Can you currently connect using another computer today?
If you can, then you should be able to connect with your Mac.
Microsoft offers Remote Desktop Connection client for Mac OS X
<http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktop client>
You can use a Mac VNC client, such as Chicken of the VNC, to connect to a VNC server on your Windows system, such as TightVNC.
LogMeIn.com allows remotely connecting to PCs from Macs via a browser such as Safari. You would have to run the LogMeIn server on your PC.
There are other services that allow you to connect Macs and PC over the internet.
However, many times computers systems at work are behind firewalls that block incoming connections. Companies that do allow remote access often times require the use of VPN software. Depending on the VPN being used, there may or may not be a Mac client. My company uses a Cisco VPN server and provides employees with the Mac Cisco VPN client.

Portege R500: cannot connect the remote DVI monitor via Dynadock

Hello,
I just connected Dynadock (DVI) with my Portege R500. The notebook would be supported -- according to Toshiba -- but my experiment confirms that Dynadock is not able to access DVI port. This implies, that Dynadock is nothing more than USB HUB.
My setup: Vista 32b Business (CZE edition), latest fixes, Toshiba R500.
Software: latest dynadock software 2.3c.
Symptom: I cannot connect to the remote DVI monitor via the dynadock, only two external panels with 800x600 are available, but Vista does not allow me to choose them.
More info: Dynadock Software requires to run without Microsoft Defender, else it blocks service:DisplayLinkService; file:C:\Program Files\DisplayLink Core Software\DisplayLinkService.exe
If you disable MSDef, the message "error 2738" appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
Yes, I do know the VBS issue, and the problem is not caused by VisualBasic -- VBS "Hello World" runs.
If you still believe, that Toshiba Dynadock is compatible with Toshiba R500, then press Fn-F5 and peek at your logs and you must find something like:
In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.
I welcome any comments, hints etc. If you are able to pass this bug report to a responsible engineer, do so please.

Hello again Leo
I still believe you are wrong. Toshiba Dynadock is not designed for Toshiba products only. It is universal product and can be used on every notebook. To be honest I believe it is better to use it with new, more powerful, notebooks.
When you sat your notebook model is listed as compatible I believe you. Why not? Toshiba can list all newer notebooks. No problem at all. To be honest I am also interested to buy Dynadock but after reading your posting I wanted to see how it works exactly.
I have contacted my friend because he works in one big electronic store and I was lucky because he had Portege M500 too.
He was very nice and offered me to test Portege M500 SSD model with Dynadck PA3542EY1PRP. I hope you have the same model. It is DVI model. So I have done follow:
- Portege was preinstalled with clean Vista OS (factory settings started for the first time)
- I have installed latest Dynadock Utilitiy for Vista 2.3c
- Installing this software you must pay attention about installations steps and the installations procedure should not be interrupted
at one step there is window Installation Complete but it is not complete and must be continued with
Display Link Core Software installation
Video Dock installation
at this point the Dynadock must be connected to favorite USB port NOT FROM THE BEGINNING
- At the end I have restarted notebook
The installation was finished properly and I have connected 20 Toshiba Tekbright LCD display (DVI cable). The native resolution is 1680x1050. in Display properties there are shown three displays. Display number 3 belongs to display connected to the Dynadock.
Resolution 1680x1050 was there and display shows perfect picture. I have tested it as extended desktop and it works without problems. I didnt test it playing some movies.
I have also tested it with FN+F5 key combination. It does not work as it should be but there is definitely no error message. I know that FN+F5 key combination is not designed for external graphic card and I know that it can not work well.
At the end I can sat that Dynadock works well with Portege M500 SSD and there is definitely no error message. It works with Vista very well. I have tested it with screen saver and with few restarts. Nothing changes. Everything was OK.
So after this test I can say that you have done some mistake. If you want to use it again I recommend you to install Vista again using recovery image. After doing this you will have clean preinstalled OS. Install software but please follow the menu on the screen and be sure all three components are installed properly. If I am remembering well when you see message about USB audio device installation you must connect Dynadock and continue installation.
PLEASE FOE DYNADOCK USE ALWAYS THE SAME USB PORT!!!
Sorry for this long story but I can say for sure IT WORKS PROPERLY!!!
Have a nice day!

Cannot connect to remote server

When trying to make connection to remote server, I receive a
message, "FTP, error, cannot make connection to host-Logon and
Password are incorrect... However, settings are correct as I could
get on in the past and when testing for remote site in site
management the message states "Adobe DW Cs3 connected to your web
server correctly".
My OS is MAC 10.4.11 My site developer can get on with DW8
using a PC and a MAC. Have tried everything short of deactivation
and reinstall.

Plese tell us what your remote site definition has in each
field (you can
omit the password).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TJMax412" <[email protected]> wrote in
message
news:gbtj7m$94l$[email protected]..
> When trying to make connection to remote server, I
receive a message,
> "FTP,
> error, cannot make connection to host-Logon and Password
are incorrect...
> However, settings are correct as I could get on in the
past and when
> testing
> for remote site in site management the message states
"Adobe DW Cs3
> connected
> to your web server correctly".
> My OS is MAC 10.4.11 My site developer can get on with
DW8 using a PC and
> a
> MAC. Have tried everything short of deactivation and
reinstall.
>

Telnet cannot connect to Remote Computer

Similar Messages

Maybe you are looking for