Telnet connection---urgent pls

each time i try to telnet using my LAPTOP.I get command not recognised.can somebody help me out now.Other PC works except mine.This is very urgent pls.

Download Putty
Search on google " Putty ".... using putty telnet.
You can open Hyperterminal and choose TCP/IP option instead of COM1.
Click on OK
You will telnet into device.
Putty use is very good very secure.
Regards,
Dharmesh Purohit

Similar Messages

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

Global_attribute20 field in ap_payment_schedules_all table - Urgent Pls

All,
Version: 11.5.10.2
I created an invoice, from the 'Scheduled Payments' tab I checked the 'Hold' flag. After the flag is checked in the UI, I noticed the global_attribute20 field in the ap_payment_schedules_all updates to 'EP' along with the hold_flag='Y'. I want to know the significance of global_attribute20 and what are all the other possible values of this field like 'EP'??
this is quite urgent, pls help.
rgds
sen

Have you tried to enable trace on this form to find out how this column gets populated?
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1] -- 3. How does one enable trace in the Oracle Application screens / forms?
Can you reproduce the issue with other invoices?
Do you have any other instance where you can try the same and see if the issue is reproducible?
Thanks,
Hussein

Routine in Bex - urgent pls.

I have 2 columns A and B in the report:
A     B     C
1234     1234     1234
5903     0     5903
0     3287     3287
I want to get the column C.
So, the condition for the column C would be :
if A<>0 and B <>0 then A
else if A==0 then B
else if B==0 then A
I heared that this can be done by routines . I need the code to do this . Also let me know where to put the code.
This is urgent pls.
Vaishali

Hi,
No need to write coding.....directly u can get these by unsing formula as told in the above forum....there u get all these conditions in Boolean operators. so just make use of them..
Thanks & Regards

Depreciation Posting in AFAB (urgent Pls)

Hi All,
pls let me know y the depreciation posting is not hapenning when it is showing Document created in Test run. It is not showing any errors nor is it posting. urgent pls.
Chatura.

Hi,
Thanks for replying. It did not create any RABUSH Session .
1) I created an Asset and gave the Depreciation Start date as 01.09.07.
2) then i posted an entry in F-90 with transaction type 100, on 01.09.07.
3) The periods are kept open only.
4) The number Ranges for AF Document exists.
5)i did an unplanned posting run for 1 to 8 periods. for 9th period i did the Repeat run . It generated an accounting entry with AF document type.
6) now if i'm trying to do the test run for 10 th period it shows that the Document is created but in the repeat run it is neither posting the document nor is it showing the error.
I was not able to analyse the reason.
Pls help me out. Also pls let me know where to select the direct FI posting in asset accounting. Points will be awarded infull if the issue is solved.
Regards,
Chatura.

Holding telnet connection id or ref.

Hi.
I am using builtin telnet connection from labview. Created 3 .net dll's open, readWrite and close. Using these dll's in teststand. The problem is , how to pass the telent ref/id from 'open' step to 'readWrite'(next step in teststand).
When i use VI's directly the telnet Ref/id is just an Number(datatype) . I can store and pass it to next step by using a (number type) variable.
But when i create .net dll it is a container. I have created a custom data type and using variable of this custom data type. The readWrite step throws an error not valid Ref/id.
The id seems to be a pointer. I think it is invalid after the 'open' step is executed.
Please let me know how to handle?
Thanks in advance.
Test engineer

Hi,
Every time I have the same error. I looking for the /log, and all i OK, and /tmp the last file is one day before the Telnet fails.
I see the logs and anywhere i can't see some error.
If you want to see any log, I can can put it hear.
Thanks a lot
Xavier

When I accept a incoming call face time says connecting but it cannot connect. Pls help me.

when I accept a incoming call face time says connecting but it cannot connect. Pls help me.

A slow Internet connection in between both parties is a typical reason for the connection taking "forever".

I need one recurcive(unended loop) pl/sql example, its very urgent pls

Hi,
I need one recurcive (unended loop) pl/sql example, its very urgent pls
Thanks,
Sathis.

I suppose you'll want to know how to get out of your undended loop too (although that does stop it being unended).
Example...
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2    v_cnt NUMBER := 0;
3 BEGIN
4    LOOP
5      EXIT WHEN v_cnt = 1000;
6      v_cnt := v_cnt + 1;
7    END LOOP;
8* END;
SQL> /
PL/SQL procedure successfully completed.
SQL>

TELNET: Failed to establish TELNET connection

Hi,
I've launched a NetShow job against several routers. The job result is successful but appears the following message:
Deploy successful (TELNET: Failed to establish TELNET connection to 10.253.49.34 - Cause: Authentication failed on device 3 times. Primary Login Succeeded / Primary Enable Succeeded )
We have only access by ssh to the routers, no telnet is configured, so that message is OK. But, how could I configure CW to try only ssh connection mode to routers? Swiches use telnet instead of ssh...so I should configure only telnet as connection mode...
Thanks in advance.

You can set the protocol order for Configuration Management applications such as Archive Management, Config Editor, and NetConfig jobs to download configurations and to fetch configurations. For NetShow, you can set the protocol order to download configurations.
You havent mentioned the LMS version as path to this feature would differ. I will provide navigation link for both lms 3 and 4.
LMS 3.x :
CiscoWorks LMS Portal > RME > Admin > Config Mgmt > Transport Settings
LMS 4.x :
Admin > Collection Settings: Config > Config Transport Settings
-Thanks

Its urgent pls help me .

how can i call a portal from webdynpro application
my requirment is
i was created webdynpro application.
in that i was created one view . in that i was created one button (go).
if i click that button i want move some other portal.
how can i acchive pls help me.
its urgent.
pls send any example programe
Message was edited by:
madipadiga nagaraju
Message was edited by:
madipadiga nagaraju

hi,
there is no direct tcode for going to webdynpro component/interfaces in ecc 6.0.
but u have se58 in ecc 5.0,as webdynpro convertor.u give ur program name and click web dynpro convertor button then it takes u to se80 .but this wda(webdynpro abap) component comes as in application tree hierarchy .
i can say in wda component refers a class .if u select webdynpro component/interface,it ask u to create a class or interface.
after that it automatically generate component controller(it is also a class),
interface view and windows.all these 3 are classes.for every window one interface view will be created.ie.. window is internal visible where as interface view is external visible.
u create view and embed these views in windows.by going to the window layout,right click on the window name and click embed view.u can enbed as many view as u wish.in order to navigate from one view to other view ,click "create navigation" by right clicking the view plugs.
by default windows and view have inbound plugs.this is literally a event of that class.
if u want to navigate from view1 to view2 ,create outbound plug for view1,the click outbound plug of view1 and right click the click create navigation the select inbound plug of view2.
then create a application .this is simillar of creating an object.
click on this object and test .this will open in browser.
for deploying u have use "sap webdynpro iview".

[한글/Korean/IOX/ASR9k] IP-TELNETD-3-CON_TIMEOUT The telnet connection from x.x.x.x has been Timed out에 대한 설명

IP-TELNETD-3-CON_TIMEOUT The telnet connection from x.x.x.x has been Timed out에 대한 설명에 대한 한글 자료입니다.
비슷한 경우가 있는 경우에는 이 문서을 참조하신 후 SR을 열어 주시면 감사하겠습니다.

You can power cycle the router and it should revert to the old IP address. But yes internally you should be able to telnet/ssh/or console with no issues. The secondary address with the proper NAT statement should work just fine! Here is a sample config:
interface fastEthernet0/1
ip address 2.2.2.2 255.255.255.0 secondary
ip address 1.1.1.1 255.255.255.0

Perl and telnet connection

Hi,
Sorry, I dont speak english very well. I want to create some program to check telnet connection. I base on old perl scripts "Telnet_Crack":
# CONNECTION.
sub connect {
print "\n\nATTEMPTING CONNECTION TO $HOST.";
$telnet = new Net::Telnet (Timeout => 5, Errmode => "return");
$telnet-> open("$HOST");
print "\n\nOK ... CONNECTED!!!\n\n";
# DO_IT.
sub do_it{
print "\nTRYING : USERNAME = $USER PASSWORD = $PASS";
&success if $telnet -> login($USER,$PASS);
$telnet -> close;
# SUCCESS.
sub success {
open (LOGFILE, ">>TELNET_CRACK") or die "\a\nERROR UNABLE TO OPEN TELNET_CRACK.\n $!";
print "\a\a\a";
print "\nUSERNAME: $USER has PASSWORD: $PASS on $HOST.\n\n\n\n\n";
print LOGFILE "\nUSERNAME: $USER has PASSWORD: $PASS on $HOST.\n\n";
close LOGFILE;
&quit;
But Telnet_Crack not working. Everything is ok in log:
Nov 9 14:07:07 jlug login[9086]: pam_unix(login:session): session opened for user us3r by (uid=0)
Nov 9 14:07:12 jlug xinetd[9004]: EXIT: telnet pid=9085 duration=6(sec)
Nov 9 14:07:12 jlug login[9086]: pam_unix(login:session): session closed for user us3r
But telnet_crack not execute success function. Maybe something is wrong with PAM? In gentoo Telnet_Crack work fine.. Of course, it's pretty good for users (dictionary attack doesnt work).
Maybe smb known, how i can check result from telnet login?

use Net::Telnet;
$telnet = new Net::Telnet ( Timeout=>10);
$telnet->open('10.2.60.156');
$telnet->login('user', 'pass') and &ok;
$telnet->close;
sub ok {
print "Success\n";
return 0;
I get timed-out waiting for password prompt at test3.pl line 5. Anybody known what I must do?

Logging telnet connection attempt

Is it possible to log a telnet connection even if the user does not try to enter a username&password? Right now I only get a log entry if they try to log in, but I really do need to know if a connection is made. Thanks for your help.
Michael

Hi
I feel you can try out 2 of the commands namesly login on-failure , login on-success with keyword which will help u out in getting the login details.
do refer this link for more info on the same..
http://www.cisco.com/en/US/products/ps6642/products_white_paper09186a00801d1cb3.shtml
regds

How to implement SMTP Email ping / Telnet connection to a SMTP Server?

Dear all,
i want to implement an advanced email address check where a connection to target smtp server is performed and the reply from the server is read back.
This program should check if the user exists and is accepted by the smtp server.
An alternative/part of the solution could be to perform a TELNET connection to the smtp host and get the output without sending an email.
Has anybody done this before?
Thanks a lot in advance.
Regards,
Adam

Adam,
Check this program.
Cheers,
Thomas.
REPORT ZTMG_TEST LINE-SIZE 132.
* Test SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'userid'
PASSWORD = MC_PASSWORD
HOST = 'servername'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
* do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.

How do I do a telnet connection with a Switch using name or DNS?

Hi guys, I am configuring a telnet connection but i dont know how to do with a name for example: suppose you have a sw names SW1, i want to do ping to that name and do a telnet connection with that name... I dont know if you can understand me, please can somebody help me?... Thanks.
PD1: i have a DNS server
PD2: it is just a practice in PKT.

I want to show the topology, maybe you can undestand better. So, i cant connect PC6 with sw by telnet with also thename BOG_SN1_SW, but server an PC5 cant connect to BOG_SN1_SW.
PD: all topology is in OSPF

Telnet connection---urgent pls

Similar Messages

Maybe you are looking for