TELNET: Failed to establish TELNET connection

Hi,
I've launched a NetShow job against several routers. The job result is successful but appears the following message:
Deploy successful (TELNET: Failed to establish TELNET connection to 10.253.49.34 - Cause: Authentication failed on device 3 times. Primary Login Succeeded / Primary Enable Succeeded )
We have only access by ssh to the routers, no telnet is configured, so that message is OK. But, how could I configure CW to try only ssh connection mode to routers? Swiches use telnet instead of ssh...so I should configure only telnet as connection mode...
Thanks in advance.

You can set the protocol order for Configuration Management applications such as Archive Management, Config Editor, and NetConfig jobs to download configurations and to fetch configurations. For NetShow, you can set the protocol order to download configurations.
You havent mentioned the LMS version as path to this feature would differ. I will provide navigation link for both lms 3 and 4.
LMS 3.x :
CiscoWorks LMS Portal > RME > Admin > Config Mgmt > Transport Settings
LMS 4.x :
Admin > Collection Settings: Config > Config Transport Settings
-Thanks

Similar Messages

Reason 421: Failed to establish a connection with your ISP

I have an excelent connection to the internet, and i try with diferent version of cisco vpn client, I have windows vista, but the cisco vpn client sen me this message: Reason 421: Failed to establish a connection with your ISP, when i try to make a vpn connection.

Hi men thanks for your help i found the problem it was configure for a dial up connection and Im using ADSL connection.

BAM Connection in 12C - Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.

Hi,
BAM server is running on 7004 in our local system.
We need o connect to BAM server from OSB service.
We tried to use the BAM adapter in the pipeline in 12c, We received Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.
Please let us know the resolution to this issue.
Also please provide some links/steps to connect from OSB service to BAM server in 12c.
Thanks,

In BAM 12c, you can send data via JMS by configuring an EMS in BAM using the "self-described" payload. Make sure the date formats match correctly. You can configure an error queue which will show you any data parsing problems.
For example,
<msgRoot dataObjectName="Student" operationType="insert" keys="RequestId">
   <RequestId>R1000</RequestId>
   <StudentId>S12345</StudentId>
   <RequestType>Admission</RequestType>
   <RequestStatus>Open</RequestStatus>
   <RequestMessage>Please Admin</RequestMessage>
   <RequestCode>3</RequestCode>
   <SubmitTime>2015-03-17 18:23:07</SubmitTime>
   <ApprovalTime>2015-02-18 18:23:07</ApprovalTime>
</msgRoot>

XE, Failed to establish a connection to the server at 127.0.0.1:8080.

hi ,
i am using XE .yesterday i have logout my application properly.but today in morning when i open my application through
Start :->Program :->Oracle Data base 10g express Edition :->Go To Data Base Home Page
Then it shows me Page Load Error
Failed to Connect
Firefox can't establish a connection to the server at 127.0.0.1:8080.
How can i remove this problem.
Manoj Kaushik

Hi,
Database is running and listener is up ?
Br,Jari
Edited by: jarola on Jun 17, 2010 1:04 PM
Also try search solution from XE forum
Oracle Database Express Edition (XE)

Bluetooth PAN (iPhone tethering) fails to establish network connection

I tried to connect my Macbook Pro to the internet using my iPhone's UMTS link. It work using the USB cable, but fails with Bluetooth. The behavior is strange:
a) The "Network" system preference shows "Bluetooth PAN - not connected" in the interface list
b) I click on connect (device is my iPhone)
c) the Bluetooth icon changes to gray with a dashed horizontal line (meaning "connected")
d) The interface "Bluetooth PAN" still shows "not connected" in the left column, but the right side shows a Disconnect button. Internet access does not work.
e) I can disconnect; the bluetooth icon reverts to its default shape.
Question: Why is there no IP connection when the link to the iPhone is established?

There is a bug, that requires to remove all other pairings with bluetooth devices before tethering will work.
http://forums.mactalk.com.au/31/67260-iphone-bluetooth-tethering-not-working.htm l#post923436

HT6207 Fails to establish VPN connection after Security Update 2014-002

I have successfully used a VPN service with Mac OS 10.7, 10,8 and 10.9. After an update with Security Update 2014-002 connection requests are directy rejected by the MacOS. When looking into the VPN-log, the same set of 4 messages is logged after each attempt:
publish_entry SCDSet() failed: Success!
publish_entry SCDSet() failed: Success!
Fatal signal 13
can't talk to PPPController : Broken pipe
Is there a known remedy?
/andersbl

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

Live Migration - Failed to establish a connection because of an unsupported protocol version (protocol version 5.0)

I'm getting a not the disk and everything) back to the host I originally had it on. Here is my setup:
Host 1 - Microsoft Storage Server 2012 Standard (NAS)
Host 2 - Microsoft Hyper-V Server 2012 (All connected virtual hard drives use the SMB 3.0 protocol to connect to the NAS - Host 1)
Delegation is setup on both of these hosts to include:
-Trust this computer, Use Kerberos only, Services - cifs, Hyper-V Replication, Microsoft Virtual Console Service, Microsoft Virtual System Migration Service
Live Migration is setup on both of these hosts to include:
-Enable incoming and outgoing live migrations using Kerberos
-Use any available network for live migration
I was able to migrate the VM from host 1 to host 2 with no problems. But when I try to migrate the VM host 1 that's when I encounter the error.
I saw a KB article similar to the issue I'm having but it only effects Server 2008 R2 (KB2705759)
I've rebooted both hosts but still get the error. The VM that is on host 2 has it's hard drive on host 1 run's fine so there are no connection issues there.
I've searched the Internet for this issue and keep coming up empty handed. I even named the virtual switch on both hosts the same to see if that would work. Please help! I'd rather not do an export and import of the VM because I'm evaluating
this product so I want to make sure it works before I put it into production.

Hi PPlbrad,
Agree with Shabarinath .
We can just live migration the VM from low version (2012) to high version (2012R2) but the reverse is not ture .
So do hyper-v replica (just for updating )
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Failed to establish Mail connection.

i am trying to connect with mail connection.
I had given IMAP and SMTP host and port.
bt it gives an error....
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at java.net.Socket.connect(Socket.java:469)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:180)
     at oracle.webcenter.collab.mail.internal.dt.wizard.MailConnectionContext.testConnection(MailConnectionContext.java:101)
     at oracle.webcenter.collab.internal.dt.common.wizard.NamedPropertiesPanel$ValidateActionListener$1.doWork(NamedPropertiesPanel.java:1263)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:161)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:619)
thanks

thanks yannick,
for reply.
bt when i am trying to connect to gmail server at that time also i face same error.
connection credentials
imap host- imap.gmail.com
imap port- 993
smtp host smtp.gmail.com
smtp port 465
secured true

HT4437 I just bought an Apple TV. I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system. I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

Running gdm-control gives "Failed to establish connection"

Hi everyone,
I have Arch Linux installed running Openbox as the window manager without another desktop environment. I am trying to setup shutting down, logging out, switching user, etc.
Whenever I run any gdm-control option (e.g. "gdm-launch --shutdown"), I just get the following error:
** (process:10479): WARNING **: Failed to establish a connection with GDM: No such file or directory
Has anyone seen this before? If I just run "gdm-control" then I get the usage assistance..
Thanks!

Have you setup the GNOME Display Manager as your Display Manager, or how do you get into Openbox?

MacBook Pro "cannot establish secure connection"

MacBook Pro "cannot establish secure connection" can't connect to Internet, tried on two separate networks and via wifi and Ethernet. Any suggestions??
Mac book was connected and working then started giving error message "failed to establish secure connection" now cannot connect to Internet via any network. Either by wifi or Ethernet. However in network settings it says it is connected. iTunes also cannot connect so don't think it is a safari problem. Have also checked networks with other devices and the network itself seems to be working.
Have further problems with syncing phone (doesn't seem to registering removal of music, storage is not freeing up) but I am hoping that solving Internet connection may solve that problem as well
Apologies if i am posting in the wrong place!
Any suggestions greatly appreciated as I am stuck.

System Preferences > Date & Time
Enable "Set date & time automatically".
http://support.apple.com/kb/TA20405

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

Holding telnet connection id or ref.

Hi.
I am using builtin telnet connection from labview. Created 3 .net dll's open, readWrite and close. Using these dll's in teststand. The problem is , how to pass the telent ref/id from 'open' step to 'readWrite'(next step in teststand).
When i use VI's directly the telnet Ref/id is just an Number(datatype) . I can store and pass it to next step by using a (number type) variable.
But when i create .net dll it is a container. I have created a custom data type and using variable of this custom data type. The readWrite step throws an error not valid Ref/id.
The id seems to be a pointer. I think it is invalid after the 'open' step is executed.
Please let me know how to handle?
Thanks in advance.
Test engineer

Hi,
Every time I have the same error. I looking for the /log, and all i OK, and /tmp the last file is one day before the Telnet fails.
I see the logs and anywhere i can't see some error.
If you want to see any log, I can can put it hear.
Thanks a lot
Xavier

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Serve

Hi!
I'm using consume adapter service> sqlbinding > to connect to sql database in order to generate sql schemas.
I'm getting below error:
Connecting to the LOB system has failed.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
Christiane

Hi,
As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
Go to Start
à Run
à (type in) Dcomcnfg. You should be inside Component Services MMC.
Expand Component Services
à Computers
à My Computer (right click)
à Properties
à MSDTC tab
à Security Configuration button.
Select the checkboxes as following :
Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

TELNET: Failed to establish TELNET connection

Similar Messages

Maybe you are looking for