Telnet on port 7 says connection refused, how to run echo server

where do I need to look at echo server configuration.
how to run echo server on solaris 10 X86.

I got the answer -- svcadm

Similar Messages

  • Firefox is crashing intermittantly and now it says "connection refused" What do I do?

    I can not access my firefox portal. It says connection refused.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • "connection refused" when accessing gmail pop server

    I am having a problem connecting to gmail. I get a "connection refused" error when I try to download or upload mail. This problem started last Saturday Aug, 22nd, give or take a day. As for trouble shooting, here's what info I can share. I am connected to the internet because I can browse websites. I was able to access my mail on the gmail website, using the browser interface. On the website, I was able to read new mail that had been sent to me since the problem started, so there's no problem with the account itself. I have made no recent changes to my e-mail client settings and I tried another email client and had the same type of error message come up. POP is enabled in Gmail. I can not run the telnet test provided on gmail because it appears to be only available to PC users. However, I took my iBook down to the local pub, connected to the internet on wifi, and had no problem. My email client performed its normal functions as usual. At this point I gather the problem has something to do with my ISP specifically not being able to see gmail's server, or vice versa. Should I contact gmail to ask them if there is something they can check? If I have to resolve this through my ISP, what should I tell them to look for? Are there any setting in the System Preference Networking Control Panel I should be checking, such as proxies, ethernet, TCP/IP, etc? Thanks

    I have found that I can use "terminal" on my Mac to run a telnet command on gmail's server addresses. It says "connection refused". Pretty much the same thing my e-mail client said. So I am still working under the assumption that the problem has something to do with my ISP specifically not being able to see gmail's servers, or vice versa. But which is more likely? If the problem is with my ISP, should I simply ask them to change my IP address (or their IP address)? This is an area that I am not very familiar with. And there is an added complication that I may not be able to contact the ISP directly. I will have to speak to the landlord, and it will probably be a situation where I will have to tell the landlord what to say to the ISP. So I'm looking for the layman's nutshell way to convey the info to the landlord so that it does not get lost in the translation to the ISP.
    And another point. I am being told that other users on my landlord's network are not having problems with gmail. Is there a way for ME to force the IP address on MY computer to change? Or is that not really the issue? Thanks

  • How to run the Server Side Existing rule in Exchange 2010

    Hi All,
    There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
    Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
    this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
    Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
    Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
    Any help would be appriciated!
    Thanks in adv champions!
    Ashku

    Hi Ashku,
    If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
    Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
    Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
    during the message sending process.
    Therefore, there may be no feature in Exchange server side to meet your requirement.
    Thanks for your understanding.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • How to run report server in oracle 9i DS

    hi..
    can any 1 tell me how to run report server in oracle 9i DS
    i've installed oracle 9i DS, but don't know how to run
    report server.
    actually i want to run a report from my form
    on button press trigger.. some of the experts r tellin
    that 1st u check whether report server is running or not..
    so pls tell me how to install report server.
    while installing oracle 9i DS, i've given Mail server
    as mysmtp.com
    Thanks
    amit

    hi ..
    i've to go in this directory n run
    rwserver -install repservername
    where repserver name is my mailserver..
    this will install reports server
    Amit

  • Connection Refused Error while running AS ABAP Initial Load

    All,
    I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
    We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
    Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
    I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
    I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
    When I run the job I get the following:
    Initializing SAP connection with parameters:
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
    Error Init failed
    I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
    Is there additional configuration that needs to take place on the ABAP side to accept the connection?
    I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

    Ankur,
    Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
    -Arun

  • Unable to telnet on port 143 on the public ip of the server

    I have a mail server behind a firewall ( ASA 8.3 ), and I have made the configuration in order to telnet on port 143 ( natting and access rule ), but when I try to telnet to the server from the inside ( telnet on the private ip ) I get the following response : OK the Microsoft Exchange IMAP4 service is ready. But when I try it from the outside ( telnet on the public ip ) the port seemes to be opened but I get a blank screen without the message. I have removed the inspection also but nothing happened.
    Please I need your help.

    Hello Osama,
    Can you post the nat configuration and the ACL configuration for this setup?
    Also provide the following?
    packet-tracer input outside tcp x.x.x.x (host on the outside) 1025 x.x.x.x( public ip address of the server) 143
    Then I would like to create some captures, but first let work on this!
    Regards,
    Julio

  • How to run Standalone Server as a Service in Linux

    Hi,
    I need run an Standalone server in Java as a Service in Linux RedHat?
    How to do this? some example or link to helpful sample code?
    How I can execute as a service in Linux RedHat 9 the following server Application?
    import java.io.*;
    import java.nio.*;
    import java.nio.channels.*;
    import java.nio.channels.spi.*;
    import java.net.*;
    import java.util.*;
    // Listen on a port for connections and write back the current time.
    public class NBTimeServer_1 {
    private static final int DEFAULT_TIME_PORT = 8900;
    // Constructor with no arguments creates a time server on default port.
    public NBTimeServer_1() throws Exception {
    acceptConnections(this.DEFAULT_TIME_PORT);
    // Constructor with port argument creates a time server on specified port.
    public NBTimeServer_1(int port) throws Exception {
    acceptConnections(port);
    // Accept connections for current time. Lazy Exception thrown.
    private static void acceptConnections(int port) throws Exception {
    // Selector for incoming time requests
    Selector acceptSelector = SelectorProvider.provider().openSelector();
    // Create a new server socket and set to non blocking mode
    ServerSocketChannel ssc = ServerSocketChannel.open();
    ssc.configureBlocking(false);
    // Bind the server socket to the local host and port
    //InetAddress lh = InetAddress.getLocalHost();
    InetSocketAddress isa = new InetSocketAddress(port);
    ssc.socket().bind(isa);
    SelectionKey acceptKey = ssc.register(acceptSelector,
    SelectionKey.OP_ACCEPT);
    int keysAdded = 0;
    while ((keysAdded = acceptSelector.select()) > 0) {
    // Someone is ready for I/O, get the ready keys
    Set readyKeys = acceptSelector.selectedKeys();
    Iterator i = readyKeys.iterator();
    // Walk through the ready keys collection and process date requests.
    while (i.hasNext()) {
    SelectionKey sk = (SelectionKey)i.next();
    i.remove();
    ServerSocketChannel nextReady =
    (ServerSocketChannel)sk.channel();
    // Accept the date request and send back the date string
    Socket s = nextReady.accept().socket();
    // Write the current time to the socket
    ObjectOutputStream oos = new ObjectOutputStream(s.getOutputStream());
    oos.writeObject(new Zaehler("usr","msg"));
    I thanks in Advance your valuable help.

    Crossposted.

  • How to run a server program in the background on Linux or Windows?

    I just finished writing a Java network application with multiple clients and one server.
    However, I am not sure how I can run the server (SomeServer.class) in the background on Windows. Also when I am running it on Linux, I don't want it to terminate when I logout of the Linux shell.
    To run the server on Linux, should I use a command like this?
    nohup java -cp . SomeServer.class > output.txt &
    Or is there another command, or perhaps some code that I can add to the program so that it would run in the background automatically and/or continues even when I logout of the Linux shell??
    Sometimes, I also like to run the program on a Windows XP machine for testing purpose. How can I do it so that it runs in the background without openning a Console/Command Prompt window??
    (redirecting the standard output to a file)
    And is there an easy way to create a EXE file that runs the program with the default JRE in windows?

    On many UNIX systems there's a utility called detach which will launch the following command in such a manner that killing the shell will not kill the process. On systems that lack this command, I'd find an open source implementation and install it.

  • HOW TO RUN ABAP SERVER PROXY IN BACKGROUND?

    Hi All,
    I have a ABAP Server Proxy running in WAS 6.20. This Server Proxy runs as a foreground Process when the scenario is executed. if we run a scenario with huge load or run scenarios with continuous load, due to the fact that the server proxy runs as a foreground process, the system slows down and has some performance issues. How to handle this issue.Is there a way to run the Server Proxy as a background Job. Please do help me out.
    Regards,
    Sundararamaprasad.

    hi,
    here's an idea: encapsulate your proxy call inside an object which can be ran in background.... like an IDoc !
    Steps:
    create a zidoc in ECC and use it from PI to ECC to send data (instead of your direct abap proxy call).
    Afer that, in z_function_module which is used to intregate your zidoc, call your abap proxy.
    in WE20 (partner profile), the process mode of your idoc should be of course "Triggered by background program", and then use a job on program RBDAPP01 (with a variant limited to your zidoc) to process your idocs.
    Note:
    1. the only interest to do that compare to create a real IDoc interface is just (in my mind) to call a common proxy or to want to reuse an existing proxy without too more effort.
    2. of course your current proxy call should be asynchronous.
    I never tested it, so it's without warranty !
    Regards.
    Mickael

  • How to run App server applications in Client systems

    Hi all,
    I m new to Oracle Devsuite 10g and App server. I configured the app server and i m able to run in my local machine (server) but i m not able to run in some others machines. even though i have given same path.
    its displaying page cannot be dispalyed
    My path is http://vagee/forms/frmservlet?config=TEST_APPS
    please tell me how to run in client systems?
    Regards,
    Kalyan

    hi
    thanks for your reply. i found the problem. In server machine Firewall was in On Mode. So that it was not allow to access. then i have switched off the firewall. now its running well in client systems also.
    thank you.

  • I cant open my icloud its says connections error how can ı do connect?

    please help my father take my ipad and ı have an important email and ı thing go to www.icloud.com and ı write an apple ID and Paswor but connections error when icloud page can be opened ?
    THANKYOU FOR ALL ABAUT THİS

    Hi jasmin,
    Did you read what Demo wrote? He wasn't saying he had a problem. He was responding to the OP who had a problem, and was providing a solution. Follow what Demo said to do....
    Cheers,
    GB

  • PI Server Port to connect to an external MS SQL Server over jdbc

    Hi All,
    I need to connect to an MS SQL server from my PI Server but this SQL server is lying outside our company network.
    To enable the connectivity, I have asked the IT Team to establish a VPN connectivity.
    The IT team is asking for the port that need to be opened on the PI server to enable this connectivity.
    Can you please tell me that which port on the PI server should be opened for this?
    regards,
    Piyush

    Hi
      Whether if you use Sender or Receiver communication channel, SAP PI always open the connection to remote server. That is, SAP PI is always the component client, therefore the only thing you should to open is the MS SLQ port.
    Regards
    Ivá

  • HOW TO RUN SQL SERVER DATABASE AS ONLINE

    hi friends
    i have developed an application front end is vb.net and back end is sql 2005. now my customer has required to run application on remote server because he have 5 business locations. for example my customer has 5 business locations in different cities now
    he want to access single database for all these location and want to store data on bridge server.how can i do this actually i have no idea to connect and run online database with desktop application.
    please give me step by step instruction in detail

    Step by Step guide: http://www.codeproject.com/Questions/433687/sql-server-connectity-over-the-internet

  • How to run SQL SERVER 2014 EXPRESS ON WINDOWS 8?

    I installed  SQL SERVER 2014 EXPRESS(132 mb)  after that when I check "All programs" I don't see any GUI to use SQL.
    I know MySQL and Linux. In MySQL client I can do,
    $MySQL -p -u root Password:*****
    but in SQL SERVER which client GUI I can use. How do I run queries?
    Can anyone give me suggestions to use SQL server. Please

    Please download SQL Server Management Studio Express from the following URL. When installing it finished you can see it in "All Programs" or simply by calling it via Run... using this command: 
    ssms.exe
    Download Microsoft SQL Server 2014 Express
    Cheers,
    Saeid Hasani
    Database Consultant
    Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
    [My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
    [Twitter] [Facebook] [Email]

Maybe you are looking for