Telnet / SSH Software options?
Hello...
After 20 years of using PCs I switched and I'm very happy. I'm figuring most things out easily but cannot find graphical SSH client software.
I can use terminal but what I need is a software package that will store all my server accounts and passwords. Or am I missing something, some way I can do that with the built in terminal combined with the keychain?
On a PC I would use something like SecureCRT.
To reiterate, my main need here is the ability to store a list of servers, ids, and passwords that I connect to telnet (SSH). So I can pick a server and connect without having to lookup the id and password for each server.
Thanks for any guidance..
I'm not sure this is exactly what you're looking for, but I use a program called sshkeychain to store these passwords:
www.sshkeychain.org/
Similar Messages
-
Prime 4.2 Telnet/ SSH Connections to Switches
Hi everybody,
I have a problem with LMS 4.2 and use Telnet/ SSH tool to open network devices.
If I start the tool telnet/ssh, always starts a telnet session and no ssh session.
But telnet is disabled on all devices in my network. Can I change something to open automatically a ssh session with putty?
regards BjoernHi Bjoern,
I am assuming you refer to the Device Center > Tools > Telnet/SSH option.
The problem is not on LMS actually. What happens is that in the background, a telnet:// is being called.
What will happen is that your system will launch whatever application has been assigned to the telnet protocol, typically the Windows CMD, which will open a telnet session automatically.
In order to change this to use Putty for example, which would allow you to change to SSH connectivity (manually though) you can do the following:
1) BACKUP YOUR REGISTRY.
Go to Start > Run > Regedit > File > Export.
2) Locate the following key:
HKEY_CLASSES_ROOT > Telnet > shell > Open > command > (default)
3) Modify the key value to point to the location of your "putty.exe" file (make sure to include the double quotes).
Default value:
"C:\Windows\System32\rundll32.exe" "C:\Windows\System32\url.dll",TelnetProtocolHandler %l
New value (will open putty automatically to the selected IP):
"D:\Tools\putty.exe" %l
New value (will open putty normally, you will need to type the IP but can change the connection protocol/port if desired):
"D:\Tools\putty.exe"
This should make your system open Putty for any "telnet://" links, including the Telnet/SSH link in the Tools section of Device Center.
Best regards,
Luis
Message was edited by: Luis Jimenez
Message was edited by: Luis Jimenez -
Can't ping, telnet, SSH or find APs in ARP, but associated to WLC & has clients
Hi All,
I have an interesting problem. I have a Cisco 2504 WLC, and six Access Points that are associated to it. I can reach 4 of the access points, which are connected to Cisco 300 POE switches, but the other 2 I cannot ping, telnet, SSH or find in the ARP table on the network. However, they are both associated to the WLC and as far as I can tell, they have clients associated to them. If I reboot them from the WLC, they find their way back to the correct WLC, and the WLC sees them in CDP, but I still can't access them in any way.
The two problem APs appear to be connected to ports 3 & 4 on the WLC, which are the POE ports. I read some documentation that says that those ports don't support Access Points but basically that you can still connect them and have it work, but don't expect any help from Cisco if you run into problems. I've confirmed that POE is being supplied in the port configs, and I have other sites with WLC's that are configured identically with APs on ports 3 & 4 that are up and not having any issues.
Wondering if anyone has had similar issues and if so, can you shed any light on this strange behavior?
Thanks.please
https://supportforums.cisco.com/discussion/11288621/2500-wlc-attach-ap -
I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?
This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track? -
IPhoto/iDVD Slideshow Software Options?
I have been unhappy with the resultant quality of slideshows that I have created in iPhoto and exported ('shared') with iDVD. The iPhoto quality is outstanding but I find significant quality degradation in iDVD in terms of clarity and smoothness of Ken Burns effect motion. This poor quality carries-over to the iDVD burned DVD-R.
Does anyone have recommendations for alternate slideshow software options that produce clear, crisp and smooth motion slideshow DVDs?
Message was edited by: MikeyMHave you asked over in the iDVD forum also? Any DVD authoring program will not be as sharp as what you see in iPhoto or on your computer because all media is reduced to 720 x 540 pixels. The same goes for videos. Smaller videos are scaled up and that's where you can lose image quality.
The two links below are to Apple KB documents on preparing stills and videos for iDVD.
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6732.html
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html
Photo to Movie has received good reports in this forum. When using the KB effect you need to use the largest image available. Not so much with just still photos. As far as videos with motion you did use the Professional Quality setting, right?
In finishing up the iDVD project are you saving it as a disk image first? Then you can check the encoding by playing it with DVD Player before burning. Burn to disc with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?
<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>
-
I am trying to update my iPad to iOS 6 but there is no update software option under general settings..please help me. Also I can not get it to connect to wireless service at home but it will other places.
Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg -
Cisco prime 2.2.0 "Telnet/SSH : Unreachable"
Hi,
I've installed the Cisco Prime 2.2.0 OVA (VMware) and ran discovery with a Credential Profile.
some of the device has discovered with complete state and some with Partial Collection Failure state.
when trying to edit the device (under network inventory) and verify credentials i'm getting the above error "Telnet/SSH : Unreachable", but when SSH from the Cisco Prime CLI with the same credentials all works just fine.
%SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed
please help...
10x
EyalHi Afroz,
All of my net devices use AAA for login.
I'm using credentials profile to discover my devices and some of them has discovered as they should and some of them are partialy discover with the Cisco Prime log it with CLI/ssh issue.
But when I'm SSH to the partialy discovered device via the Cisco Prime CLI with the same credentials as configured at the credential profile, I'm able to login with no issue.
Please note - while I'm editing the partialy discovered device and testing the credential via the Prime GUI, it display the error message "Telnet/SSH : Unreachable" - and the device log meeage is %SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed.
What does it mean?
10x
Eyal -
Telnet/SSH as root not working
I have freshly installed Solaris10 U5 through network installation method.
After installation is over, i am not able to login as "root" over the network through Telnet/SSH
What file we need to edit to disable this rule ?Telnet is disabled by default.
So is root login via SSH.
To enable root login, edit /etc/ssh/sshd_config and change the line:
PermitRootLogin no
to
PermitRootLogin yes
Then restart sshd.
if you really want to enable telnet, use the svcadmin command. -
Unable to Telnet / SSH to a particular cisco switch
Hello,
I have an unusual issue that I just can't seem to track down. We have a Windows Server 2008 R2 box that is unable to telnet or ssh to one switch in our network.
Server IP: 10.0.0.74
Cisco Switch IP: 10.1.0.7
I am able to access all other switches/routers on the 10.1.0.x network, but not this one. I ping and tracert by ip address and name.
We have a number other servers on our network and they all can access this switch
Example:
a. 10.0.0.73 can telnet/ssh to 10.1.0.7
b. 10.0.0.72 can telnet/ssh to 10.1.0.7
c. 10.0.0.50 can telnet/ssh to 10.1.0.7
d. My workstation (10.0.250.213) can telnet/ssh to 10.1.0.7
If anyone can help with troubleshooting further, I would greatly appreciate it.Thanks for the reply Philippe! Here is the route print
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.0.0.2 10.0.0.74 266
10.0.0.0 255.255.0.0 On-link 10.0.0.74 266
10.0.0.74 255.255.255.255 On-link 10.0.0.74 266
10.0.255.255 255.255.255.255 On-link 10.0.0.74 266
10.10.0.0 255.255.0.0 On-link 10.0.0.74 266
10.10.0.74 255.255.255.255 On-link 10.0.0.74 266
10.10.255.255 255.255.255.255 On-link 10.0.0.74 266
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 10.0.0.74 266
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 10.0.0.74 266
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.0.0.2 Default
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
1 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Firewall is disabled and there is no active antivirus. Im pretty sure port blocking is not the issue. I am able to ssh and telnet from this box to every other switch/router in our network.
This server has Solarwinds on it and tracks the health of our network (servers, routers, switches, ups, ect.). The only reason we noticed an issue is because it stopped backing up the config for this particular switch. All other switchs/routers
config is backed up to this server every morning at 2:00AM.
With solarwinds, this server is also able to communicate with this switch via snmp / icmp and ping.
Thanks again for the help! -
Transport input telnet ssh help
Hello,
I had two questions about remotely login to switch or router :
1. What is the default setting on switch or router to accept remote login (i.e., telnet or ssh)
2. If i configure...TRANSPORT INPUT TELNET SSH... which one is default and accepted first by switch or router. I mean I know that it will accept both but I want to know that If I configure both to accept then which one has the first priority or by default which one is accepted first, tenet or ssh.
Thanks1) Default settings on all VTYs are "transport input all" --> all the supported protocols, that includes both telnet and ssh.
2) There is no priority level on which one is accepted first. Basically it just listens on both protocols (telnet - tcp/23 and ssh - tcp/22) for remote management.
Here is the command description for your reference:
http://www.cisco.com/en/US/docs/ios/termserv/command/reference/tsv_s1.html#wp1069219
Hope that helps. -
I need to update my operating system, but when I go into settings and then general I do not have the software option even available. What can I do? Aim not sure what operating system I'm currently working with I know it is not the iOS 5 or newer.
You'll need to connect the iPad to a computer running iTunes. Then update through that.
The following link has the ste by step guide. Just scroll down to the section titled Update your device using iTunes
http://support.apple.com/kb/HT4623
to find out which iOS version you are rtunning, you can go into settings->General->About and lok for the section titled "Version" -
ASA5520 - Management0/0 Telnet/SSH/Ping Access
hey all, hope this is an easy one.
- how can i setup the management interface so that we can ping to the mgmt interface from a subnet that is on a different subnet than the Management0/0 interface (source ip would be 192.168.100.0/24 which may conflict with the inside interface)
- i am able to telnet/ssh from the 192.168.100.0/24 subnet connected to a router behind the mgmt interface
- i am not able to ping the mgmt interface from the 192.168.100.0/24 subnet connected to a router behind the mgmt interface
- is a security level required on the mgmt interface? it does not work unless we put one. if so, what are you guys setting it to?
interface Ethernet0/0.101
description Outside
vlan 101
nameif outside
security-level 0
ip address 101.1.1.100 255.255.255.0
interface Ethernet0/1.102
description Inside Cat3750-VM G1/0/24 (PRI) G2/0/24 (STB)
vlan 102
nameif inside
security-level 100
ip address 192.168.100.100 255.255.252.0
interface Management0/0
nameif mgmt
security-level 90
ip address 192.168.253.100 255.255.255.0
management-only
ssh 192.168.100.0 255.255.255.0 mgmt
telnet 192.168.100.0 255.255.255.0 mgmt
I try to add a static route but get an error:
ASA5520(config)# route mgmt 192.168.0.0 255.255.252.0 192.168.253.1
ERROR: Cannot add route, connected route existsHello Robert,
by default the Managment interface of an ASA is going to be used just for managment traffic only.
Now in order to be able to use it as any other interface you will need to use the following command:
- Interface managment 0/0
- no managment-only
And just to let you know it is imposible to ping a distant interface as an example from a inside subnet to the outside interface ip .This as security measure.
Regards,
Julio -
HT4623 I do not have the Software option on my ipod
I am trying to update my ipod touch, i went to settings, general and i do not have the software option. What does this mean?
That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
I need to update my Iphone 4 to @ least i4.03 so that I can install instgram....when I go to settings/general....there is no software option...how do I acquire software updates?
Correct; you need at least iOS 5 to have a software update option on your iPhone.
Your only option is to connect your iPhone to iTunes and, once synced, do a "Check for Update" on the right side in iTunes' summary tab.
Maybe you are looking for
-
how do i get iPhoto to stop bothering me with Mobile Me Migration windows when everything's already on my hard drive?
-
HT4436 I wish to cancel my Icloud subscription, anyone tell me how to go about this?
I wish to cancel my I Cloud subscription, can anyone tell me how to go about this?
-
Does anyone know how to go about contacting apple directly by e-mail? I am trying to figure out how to charge the battery for my ipod mini and it was only able to charge once. I have only had it a couple of weeks and cannot seem to find any help. I p
-
I have one query about table entries.
i have one query about table entries. suppose for particular table we maintained 5 entries in dev server. actaully in the dev we have only these 5 entries. In production we have 200 entries actually. If we move the cts from dev to production ,we
-
I didn't receive my security questions reset email?
I tryed buying an app today and it said I needed to answer my security questions, but I forgot them, so I clicked "send reset email" and I never received it. I tryed sending it again and I still didn't receive it. I want to buy apps but I can't becau