Telnet through linksys wrt300n

hi there.
i am trying to accept incoming telnet connections through my linksys wrt300n.
i have unchecked filter anonymous internet reuqests
unchecked filter nat redirection
unchecked filter multicast
i have enabled the TELNET option in the port forwarding
i have also added another telnet option to my local ip 192.168.1.110 with port 24 (just for testing)
i have a telnet server enabled over here, and i can telnet to localhost no problem.
i have my mcafee firewall set up to allow incoming connections on tcp port 23
as well as tried it with full access to the telnet server program.
as i said, i can telnet to localhost to get the bbs no problem, so the server is setup properly.
but when i try to telnet to my internet ip address (or my dynamic ip domain name)
it is telling me connection refused.
what am i missing here?

btw, i am running the latest linksys firmware 1.03.6 on my wrt300n
please help.
i am used the portforward.com instructions and everything.  it seems everything is setup properly!
help!
peace,
chris.

Similar Messages

  • Extending a Linksys WRT300n v1.1 network with Airport Extreme

    I have a linksys wrt300n v1.1 as a wireless access point to our network. It does not have DHCP enabled, as we have another router performing that function.
    I want to extend the range of our wireless network into the building next to us (part of our office complex). The signal from the linksys is strong at one end of the building, but doesn't reach through the rest.
    I bought an airport extreme, and am trying to configure it to extend the wireless. It is currently connected to the linksys via wireless, but that connection doesn't seem to be stable, and even when it does connect the airport utility shows the error message: "unable to extend the wireless network."
    I cannot see any settings in the linksys config pages relating directly to WDS; current AP Isolation is disabled (which I'm certain is correct) and NAT is disabled (I'm not sure if this is correct or not).
    OK - partial resolution; I've switched the Linksys from WPA/WPA2 to WEP encryption. I seem to be able to connect the AE wirelessly, but it still says that it can't extend the network.

    Thanks. I've kind of gathered as much from the reading I've been doing.
    I broke down and dropped another $200 for a second extreme. I've got to say, it works beautifully, and is a dream to configure. The down-side is that the Apple "Genius" told me it would work the first way, "no problem."
    I hate it when people who are supposed to know guess rather than actually find out.

  • Getting 54.0 Mbps maximum on Linksys WRT300N

    Hi,
    I have a Linksys WRT300N router. I am getting only 54.0 Mbps speed but I wants 300 Mbps.
    Network mode is “Mixed” in basic wireless settings.
    When I select wireless-N then I get disconnect.
    Is there any settings for my wireless LAN card or some thing else.
    Please anybody guide me what to do.
    I have Linksys Wireless-N PCI Adapter WMP300N.
    Regards

    Your wireless n equipment should be capable of connecting at 200 to 300 Mbps.
    There are many causes for poor wireless connections, and many solutions:
    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router.  (That would certainly explain a 54 Mbps connection!)   Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    In the router, make sure the "Radio Band" is set to "Wide".
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.   For wireless n, make sure your standard and wide bands are at least 2 channels apart. For example try standard band on channel 11, and wide band channel 9.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Some users have reported improved wireless performance by switching to WPA encryption.
    If you continue to have problems, try the following:
    For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
    If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
    Hope this helps.
    Message Edited by toomanydonuts on 07-24-2008 01:27 AM

  • Linksys wrt300N working perfectly until I changed my broadband line

    Please help.  My Linksys wrt300N was working perfectly but.. the analogue line that receives my broadband was switched & now I cant get broadband to go through the router.  The linksys router feeds off a BT router & then a netgear hub.  my laptop says that it is connecting well with the router but can not pick up the internet.  The cable that plugs into the back of the linksys is sending broadband fine as if I hardwire my laptop in to it (therefore bypassing the linksys router all together) I have no problems connecting at all.  I have tried restarting all the hubs in tern & still have no success.   Any suggestions (I only bought the router recently but most helpfully cant find the start up disk or any related paperwork!). 

    Turn off the WRT300N. Unplug your modem, wait at least 10 sec then plug it back. Wait until initialization is over (flashing lights stabilize) then turn on your WRT300N.

  • Can I use a Linksys WRT300N as a range extender?

    Currently I have a Linksys WRT300N V1 that I am not using.  I do not get wireless coverage in my kitchen and back yard.  I want to use the WRT300N as an extended.  Is this possible?
    Currnetly I have a netgear WRT600 connected to my modem (verizon fios).  I would like to use the WRT300N as a repeater/extender if possible.
    Thanks
    Brian

    Linksys routers doesn't support repeater mode, If you want you can use WRT300N as an Access Point by connecting it hard wired to the first router.

  • IMac vs Linksys WRT300N

    I am new to Mac and am thinking of purchasing an iMac 24", and am wondering if the iMac wireless function will work OK with the Linksys WRT300N.
    Thank you.
    mlkrandj

    Linksys does not support Apple,
    Well, yes and no. They don't know diddly about macs, but I have occasionally gotten decent help from them. It's usually easiest if you just tell them you're using windows (and that the auto setup software didn't work), log into the router with safari or whatever browser you use, and just wait out all the "…now launch internet explorer" garbage till they get to the nitty gritty. They do have OS X articles in their support kbase, although they aren't a lot of help.

  • Macbookpro & linksys wrt300n router

    Hello, can you tell me if I can use a linksys wrt300n wireless router with a macbookpro & G4 Imac ?
    thanks

    Hi Danielh,
    I sure hope that I can help you. Sorry for the somewhat slow response time, I have been playing XBOX all afternoon.
    First off, I would totally disagree with the Office Depot guy. The thing is "n" isn't actually a "real" thing yet, it has yet to be approved by the WiFi alliance who oversees everything wireless. Right now "g" is still the standard, which is what is built into the AirPort Etreme cards in all current Apple computers.
    On the topic of why you would want a "faster than 6MBps connection" from the router, it is because of how the router transmitts "stuff." While yes, Comcast has a top speed tier of 6MBps for standard service, the faster your connection to the router the faster files will transfer, and generally the better the connection you have. Lets say you have a 11MBps connection with a router, and you use your comcast. You will not get the full 450-600KBps download speed that you would get while directly connected to the router. With a router such as the WRT54G/GS, your connection speed will generally be 54MBps, which will achieve download speeds on the internet much closer to the wired speed of 450-600KBps. And now with Comcats new PowerBoost, us comcast people can now get speeds of up to 12MBps with our standard 6MBps service. So the faster the router, the faster the internet will go, although downloads will never go over the standard 6MBps (with bursts up to 12MBps.)
    If you frequently move/transfer files from computer to computer, than the faster your wireless connection the faster your files will transfer. So in fact, 108MBps is NOT overkill, although no current Apple computer will support 802.11n at this time.
    I actually have the WRT54GS, but have worked with many WRT54G's for customers. Both are very good routers and some of the cheapest, although the WRT54GS is more around mid-range price. Some people do have problems with the WRT54G but many times this is because they have not set it up properly, or updated the firmware, or in worst case they could have a "dud" router which happens quite a lot in the world of WiFi. But overall I have been EXTREMELY happy with the WRT54GS, and most Linksys routers that I have worked with. (As a side note I HATE D-LINK ROUTERS!)
    While I do not use my iBook, or my Dell laptop, with a WRT54G router much, the times that I have I can't really tell a difference in speeds between the WRT54G and my WRT54GS. So I would save your money and just get the WRT54G. Yes any Linksys router, other than the Compact series routers, will work just fine in your apartment. Linksys are somewhat superior to other routers such as D-Links, and Netgears because of the second antenna that most all of them sport, such as the WRT54G.
    I really hope that this helps!
    -MRCUR

  • Linksys WRT300N Connectivity with Proper Settings

    I am a computer tech and have worked with Linksys products for years. Over the last year or so, I have had so much trouble, I cannot explain it. I have a client who purchased a Linksys WRT300N that I initially setup a few months ago. It is connected with cable modem from Linksys. Hardwired, the speeds are just fine. I have the most recent firmware and setup lower threshhold levels and such to gain better wireless signal, performance. The only computer I am having trouble with is one using the WUSB300 adapter. The computer is XP SP3 and using the most recent driver. I even installed the Linksys utility and tested it, to no avail. This desktop is right around the corner from this router, it works well with a Mac, but it will not be read by the desktop WUSB300. I did release/renew, uninstalled/reinstalled, checked everything and the adapter will not get a good signal plus it doesn't get assigned an IP and continues with the 169.xx.... I rebooted the modem then router, and then rebooted computer. The initial connection worked then gone. It never held and this is around the corner. For the Mac, I did a speedtest.net and with a strong signal, and Wireless N only, I received less than DSL lite speeds but hardwired, I achieved up to 15000kbps. I cannot explain what is happening. The router has the most recent firmware, there is no interference since transmitting N only, and I did the proper settings that previous posts commented on, to get better signal strength. What am I not seeing? Why would the speeds be so slow, from doing at least 6 tests over an hour? Also, why would I not get an ip address from one N router to another N device, by the same manufacturer? Sorry for the frustration here, but I recommended this equipment a year ago and Linksys has been very disappointing in its results. These N products are unreliable. Some work and most don't...I am learning. j

    luimar wrote:
    because the adapter which you are using is draft 1 version adapter which has had issues connecting in the wide channel = 40.
    I have a one year old Macbook and I assume a first generation built in N wireless card. If, in fact, it is a Draft 1 adapter, does that mean I should use the 20Hz band instead of the wide 40Hz? Thank you for the advice. SMR1

  • LinkSYS WRT300N-EU V.2 (Firmware Version: 2.00.17)

    My LinkSYS WRT300N-EU V.2 freeze random when I watch stream media. After the router freeze I have to power cycle it. Cant find any updated firmware for the router, what can I do to fix this.

    You can prevent freezing router by enable Security->Firewall->Filter Multicast option in your router setup.

  • How to have Linksys WRT300N work with Westell DSL Router?

    I have a DSL Modem (Westell Versalink Model Number    A90-750022-07
    [IP 192.168.1.1]
    I would like to use the Linksys WRT300N to connect my wired and wireless devices to.
    DSL Line -->   Westell       --> Linksys WRT300N
                            192.168.1.1
    Can you tell me what settings I need on each router to enable usage? Cabling?

    You can also try the steps on this link depending on your preference: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3733

  • Xbox 360 live lagged and disconnect often with Linksys WRT300N router

    I live in a two story townhouse with the modem and wireless router (Linksys WRT300N) located in the upper floor and the Xbox 360 system with wireless adapter in the bottom floor.  Our laptop works fine with good connection but the Xbox live gameplay lagged big time and disconnect often.  What are we doing wrong?

    Configure the X-BOX using static IP....subnet mask ....gateway & DNS numbers as in the range of router ....
    Also use the wireless settings same as in router
    Forward the ports 88 & 3074 .... .on router .....
    See above settings make any difference

  • Can't print through Linksys Print Server with PowerMac G5

    Just wondering if anyone out there has been able to print using their PowerMac while spooling through a print server, specifically a Linksys PSUS4? I have a desktop and a laptop PC and a PowerMac g5 1.6Ghz and a MacBook Pro 2.0Ghz and only the HP laptop is able to print when my Epson R340 printer is routed through the print server.
    I was using a Belkin switchbox to switch between USB hubs when printing with the desktop computers and this worked fine, other than having to remember to switch the connection when using a different computer.
    Since then, I have added a Linksys wireless G router and a Linksys PSUS4 print server to allow the two laptops to print wirelessly. Now the only machine I can print from is the HP PC laptop. Neither desktop can print, nor my Macbook.
    I am trying to use GIMP to print with my G5. When I send a jpb, it spools all the way through the job, but the printer never responds or prints a single sheet.
    Again, I am using a PowerMac G5, 1.6Ghz and MacOS 10.4.8.
    Any help anyone can give would be greatly appreciated!
    PowerMac G5 1.6Ghz   Mac OS X (10.4.8)   Also using MacBook Pro 2.0Ghz

    I've only been able to get it to work with my wife's HP laptop. So far, GIMP priting with the Mac is a no-go. It spools, but the printer just sits there.
    As of now, I'm trying to print from my wife's desktop, which is an older model eMachines 1.1Ghz with XP Professional. Right now, it's just sitting there with a "Printing" window.
    I have called Linksys, but to no avail. Couldn't understand they guy was speaking with. According to a networking friend of mine, there must be a PC host machine which is on all the time which acts as a "bridge" to get the files to the printserver. I don't know about that, but my father-in-law uses a PSUS4 to print wirelessly from 2 PC laptos with no problems.
    Gonna try calling Linksys back and see if I get anywhere with that. If not, we'll try another route.
    I'll post with what I find out.
    PowerMac G5 1.6Ghz Mac OS X (10.4.8) Also using MacBook Pro 2.0Ghz
    PowerMac G5 1.6Ghz Mac OS X (10.4.8) Also using MacBook Pro 2.0Ghz

  • Can't connect to PPPoE through Linksys anymore....

    I've been running my Earthlink DSL through a router for 9 months without any problems. (Model: Linksys WRT54G v3.1)
    But yesterday it seemed to just not work anymore.
    When I connect the ethernet directly to my Netopia modem from my G4 MDD Powermac, I can connect easily with the 'automatic' settings.
    HOWEVER... no matter how many different settings I try, I can't get the connection to work through the Linksys router. I keep getting the message 'Could not find PPPoE server'. The Network Settings says the ethernet is set up and trying to connect, but it can't seem to.
    I've tried unplugging, pushing in the reset buttons and all sorts of other things, but nothing works.
    I contacted Linksys and they claim you can reload the router firmware with a Mac. But after downloading their firmware update, I found it can't be opened by my Mac.
    But I'm wondering if the firmware is even the problem?
    Any clues much appreciated....

    That sounds like the exceptional tech support experience.
    Frankly I'm shocked at how bad the earthlink tech support experience was. In the past it wasn't that bad. It used to be a 3 minute wait and then someone halfway knowledgeable would be there.
    This time I waited through 4 minutes of brainless telephone ads until they put me through to the Phillipines to Moron #1 who started off asking in an almost impossilbe to understand accent "What eees your father's middle name?" and then "What ees your credit card number?"
    I explained to him that he was supposed to as for the mother's maiden name and that I would NEVER give him my credit card number. And then... after another 3 minutes of telephone ads I got connected to another identical 3rd world slave labor tech person who simply asked me all the same questions over again
    Needless to say, the experience was a sad reflection of corporate strategy... thinking this is going to get them customers.
    Rant over... thank gosh for the Apple discussion boards!

  • Wireless printing from MacBook Pro to MacBook through Linksys?

    I have a MacBook connected to an Epson printer. Our Internet connection is through a Linksys WRT54G router.
    My son just got a MacBook Pro. Both machines are running Leopard.
    Can he print wirelessly from the MB Pro through my MacBook connected to the printer? I've got print sharing turned on in both machines, but I can't find any other documentation that tells me how to do this. I've searched and can't find my set up listed there - I see lots of Window to Mac, print servers, Airport Extreme questions. It's so simple, however, that I must have missed it - so forgive me if this has been answered before.
    Patrick

    Patricksgolden:
    I have this same setup with a G5 connected to a home network and a linksys wireless router that I connect a new MacBook Pro and my daughter connects a dell laptop. I have two printers connected to the G5 which runs Tiger. I turned on print sharing as indicated by apple documentation. This did not work. I reviewed all the postings on printing using leopard and found the following posting very helpful.
    OS X 10.5 client and NON-OS X CUPS server: adding printers, solved.
    What I did was update the local CUPS configuration file by going to http://localhost:631/ and editing the configuration file based on the above posting. Then I rebooted by Mac. The printers then appeared in the systems preferences default option. However they still did not work.
    Finally I added them manually using the IP option and the LPD selection with the G5 IP address. Make sure you put in the print queue name. The only other change I needed to make was to use the Generic Postscript driver instead of the Epson driver(RX500). It then started to print. Using the Epson driver sent it to the printer however it completed without printing.
    I hope this helps. I know it is not the step by step instructions, however if you look at the above thread there is more detail.

  • Transmit MiFi4510L through Linksys WRT54G Router

     Is it possible to send my MiFi signal through my Linksys router to my network? If so, please list the configuration steps for both units. Thank you.

     Is it possible to send my MiFi signal through my Linksys router to my network? If so, please list the configuration steps for both units. Thank you.

Maybe you are looking for