Telnet with TestStand (Send and Received data)

Hi,
I look for a long time a DLL allowing me to use the protocol via telnet TestStand for both : broadcast and received.
Today I found this DLL, which is free, it is part of a package extraputty.
I hope that this can help you.
extraputty.free.fr
Message Edited by Support on 02-04-2008 09:00 AM

Hi,
I have written a .NET Telnet Compenent for Teststand and it even works well.
Most of the code i have found at Codeproject.com .There is thread called TerminalControl.
You can use this with only a few modifications. The major task you have to do is to add
the TS stuff.
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

How to stop apps from sending and receiving data?

Or does it even matter because I have cellular data turned off...

If you have cellular data turned off apps can still send and receive data via WiFi. But why do you have apps that send and receive data if you don't want them to send and receive data?

For those new to mail with issues sending and receiving mail

I was surprised that I did not see anyone referring to this amazing and invaluable tool, the Mail Setup Assistant:
http://www.apple.com/support/macosx/mailassistant/
This tool get's me through troubleshooting sessions more than anything else. Most problems are due to settings when it comes to Mail. Half the time issues with sending emails is just due to SMTP settings, sometimes you do not need to have Authentication for outgoing mail. Sometimes your password is just incorrect. Use Mail Setup Assistant it is pretty **** accurate I use it on a daily basis.
Sometimes the settings are perfect and sometimes you just have to erase mail completely by doing:
~/library/preferences/com.apple.mail.plist pull.
~ refers to your home folder!
Hope this helps!

It is a very good idea, however many of us do not live in the USA, so cannot yet take advantage of this tool.
Pity!

My blackberry keeps sending and receiving data

and it is draining my battery!!!! My phone is just sitting beside me, not receiving any emails or texts and it isn't loading an internet page, so I don't know what it is doing. My battery is dying before 11:00 AM which shouldn't happen.

My battery is also draining...could it be a virus? I uninstalled twitter-facebook- and all those stupid time-wasting social networks, as well as a Google search application I deleted/uninstalled it too. My BB no longer seems to be freezing caused by sent/receive. This may have fxed the problem but will know by 5pm how low the battery will be.

Continuous data send and receive with unknown source

When I connect my ipad to the lightning cable, no matter if it is connected to PC or it is going to be charged, if the wifi is on, it will start sending and receiving data continuously and with a high speed.
I want to stop this thing from happening because it nearly consumed all of my internet account
What is the reason?

>
>
Did you download from
http://java.sun.com/products/javacomm/
If so, there is an example in
commapi\samples\SerialDemo
but this only sends characters back and forth.
You will have to create a design to handle the send
and recieve. What will the data be?
Will you transmit files? Maybe you need to create
something like XMODEM.
Will you transmit media streams? Maybe you should look
at JTAPI
http://java.sun.com/products/jtapi/
(which is only a definition, or a real reference
implementation like:
http://gjtapi.sourceforge.net/
==================================================================I'm sending information from a client for a credit verification, This information is sent in a variable, and then the modem receives a file with the results.

Sending and receiving Signal through Internet connection

Hello,
I want to send data that is a continuous generated signal through internet.
I want to transmit this signal live through internet technology.
I don't have any background of web development
Can anyone suggest me how could I send and receive data using internet.
Regards

Hello,
I have made a basic VI using Network Stream, it send Random Number generator which i want to plot on a waveform chart on the other side.
But when i run the VI on continuous mode it gives an error as End point broken on the client side.
Kindly guide where i am lagging.
Regards
Attachments:
streams.vi ‏14 KB

TCODES FOR SENDINGIG AND RECEIVING DATA THROUGH ALE

Hi,
All,
Message type I can find for the following :
Equipment master: EQUIPMENT_CREATE
Work centre: WORKC2, WORKC3 or WORKC4
Functional location: FUNC_LOC_CREATE
but i did'nt find a transaction code for sending and receiving data through ALE.
For example: Send material T.code BD10,
Receive material T.code BD11.
Please give the solution.
Regards.

can Tx BD21 is of any help

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hello Nikkii,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting telephone-number activation (iPhone only)
After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
Best of luck,
Mario

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Telnet with TestStand (Send and Received data)

Similar Messages

Maybe you are looking for