Telstra 4G Mobile Broadband

We have 2 devices which we need to install on PC at various sites for remote monitoring, however, they need to have static public IPs. Is there a way to get STATIC PUBLIC IP for Telstra 4G Mobile Broadband devices?

Thankf for your reply. I contacted Telstra and they have activated telstra.extranet (GPTEXB3) APN on the services, They have confirmed that Telstra does not provide any Static IP allocations for their mobile network services.

Similar Messages

Bigpond Mobile Broadband vs Telstra Go Mobile Broadband

I am currently on a 15GB Bigpond Moble Broadband Plan, and whilst checking out options to reduce my monthly costs noticed the Telstra Go Mobile Broadband Plan. As far as I can tell the only difference is that the Go Mobile Plan allows you to add an extra 1GB for $10 if needed, but the Bigpond plan just slows your service.I live in an area where the only service I can get (apart from satellite which I don't have) is wireless broadband.The big thing is that I am studying externally at both Uni and TAFE, so my download needs vary. I am thinking at this stage that switching to the Telstra Go Mobile would be a better option, but then again I have also heard that you are better off staying with Bigpond Mobile Broadband.Any advice or information people have on this topic would be greatly appreciated. Thanks

The only thing I can suggest is that you look at your average monthly data use and go from there.. Both services utilise the Telstra network so there shouldn't be any speed drop.

Telstra pre-paid mobile broadband

Has anyboby managed to setup up a Telstra Pre-Paid Mobile Broadband Turbo on OSX Lion 10.7.1.
The dongle works fine on my WIndows machine so no issues with activation of the sim or account balancwe etc.
I've downloaded and installed the latest version of the software from the Telstra web-site but still no luck. The software installs, but will not connect to the 3G network.

Can I just say that this is a great way around those evil hotels that I am forced to use by my employer ... hotels that have a $25 to $35 charge for 24 hours of data delivered by WiFi or LAN cable to one's hotel room. In the last three years with my previous iPhone 4S and now the 6+, I have been able very simply to tether my laptop (Apple MacBook Pro 15") or tablet (Samsung Galaxy Tab 4 8") to the data allowance on my phone and use the internet without the hotel's massive UNFAIR charges.

Set up and activate Telstra Pre-Paid mobile broadband

Set Up Your Pre-Paid Mobile Broadband WiFi Device
Activate Your New Telstra Pre-Paid Service

Re: Set up and activate Telstra pre-paid mobile broadband
I currently have internet at 6/320 Manly Road Manly West Qld, but have recently moved, so need to know what my options are on moving the service to my new address.
I tried Wi-Fi from the main house at the new address, as I live in the unit in the back yard, but even with an 'extender' which we purchased today, there is minimal WI-FI.
Is it possible to get a moveable modem so that I can take it anywhere, and have this instead of my current service, I don't need a home phone, what are my options?

Telstra Mobile Broadband MF626

Hi, I recently purchased a refurbished a macbook pro, 2009 model with lion installed. I have a Telstra Mobile Broadband USB Modem, MF626. I have downloaded the latest connection manager yet it still does not work. Does anyone know if it is compatible with lion??
Thanks

No - if you are talking about the USB port on the Express it is only for a printer - on the Extreme it is for a printer or hard drive

Lack of options for Mobile Broadband users.

I am really disappointed with the lack of options i have because my only internet option is Mobile Broadband. I live in an area, that Telstra decided, didnt need to change with the times so we get no ADSL internet as the exchange is too far away and Telstra dont feel the need to upgrade so the whole town can get ADSL. The NBN is everywhere around us but here and the mobile broadband is a bit sketchy as we have poor reception in our area. There are no bundling options for mobile broadband and discounts are quite poor. Paying $60 pm for 8 gb of data , which lasts about 2 weeks at my place (teenaged kids) if im lucky. I have since got Foxtel through telstra and also have my home phone also. So now I pay well over $200 per month for these services. It is annoying to know that people can get all this with multiple times more data and included calls for lees than half of what i pay. So why are we being taken advantage of just because Telstra havent provided decent infrastructure for us to get ADSL.

Hello,The reason that Telstra are limiting their infrastructure is that the NBN will make their network largely redundant, and will not spend money to tide their customers until NBNThere is also major congestion even in inner suburbs of major cities.Sorry, but as a customer also, I am unable to help you.Thanks

Mobile Broadband - why is there a 25GB limit for business? I need more!!!

Hi Telstra.I am a business owner in Western NSW.I can not get adsl or nbn where I am so I am stuck with the mobile broadband as the only solution.Pity that the prices are ludicrous and the plan limits are completely unreasonable. I understand that alot of people only use mobile bb when they are out of the office or travelling and dont need much capacity, but we use mobile broadband to run our entire company because your current infrastructure does not support any other internet access. With most business transactions and accounting being cloud & email based now, our dependance on the internet is everything. When is Telstra going to come into the modern age and learn to be flexible to tailor plans to suit individual cases and not charge the earth for it??? Cheers.Mick

While I agree about the limitations, they do have reasons to limit the access to data over the mobile network... Data over the mobile network does cost more, because it requires more investment and is much more limited in capability than the fixed network. With the new 4G and 4GX capabilities, a lot of towers would be able to handle increased data allowances on Mobile data, in the same way that the new plans provide the higher allowance for Mobile Phone plans, however I highly doubt that it will be significantly cheaper if they do change the plans... more likely the prices will be pretty much the same but with different allowances or something... I know one of the moderators did hint at new plans being in the pipeline, at least for residential customers, and if they increase those, no doubt the business ones will also increase... however, when and what actually is going to change is yet to be seen. But as PP has said, the erratic nature of the NBN roll out is the greatest enemy of private investment...

Connection Manager for our Post-Paid USB Mobile Broadband devices

Windows and Mac users can download the Telstra Post-Paid Mobile Broadband Connection Manager for USB devices.
Download for the Telstra Post-Paid Mobile Broadband Connection Manager:
Bigpond Mobile Broadband Users:
For Windows users (ZIP, 33.9 MB) - Version 3.17.30227
For Mac users (DMG, 11.4 MB) - Version 3.15.20905
Telstra Mobile Broadband Users:
For Windows users (ZIP, 33.9 MB) - Version 3.17.30227
For Mac users (DMG, 11.4 MB) - Version 3.15.20905
When downloading this update, your data allowance will not be affected. The Telstra Post-Paid Mobile Broadband Connection Manager can send and receive SMS. Just open your Connection Manager and click on the My Messages button to get started.

Hi Elise, What prepaid device did you purchase, so we can assist you better with that? What happens when you plugged the device into your computer? Did anything auto-run? Are you able to read the device's contents? There should be a file in it which you should be able to load as well.

Surely this is wrong. ( Unable to get ADSL and Mobile broadband SUPER expensive and doesn't work)

$115/month for wireless broadband ( that works 5-10% of the time) for ONLY 15GB a month is the price?? Surely this is wrong.
There is no justification for a price so large for so little data for a service that barely works. Apparently we can't get ADSL because of A: no ports and B: pair gains line to the house. ( Both of which i've seen no proof of) Why is this a problem now when 5 years ago it wouldnt have been??? I've lived 40km's out of town and had perfectly fine internet connection, now I live 4 minutes out of town and can't get it. I must not have been put onto the correct technical support or the people I'm talking to don't know what they're doing.
Because it barely works now I have to use my phone, which adds a huge amount to my phone bill because phones only have 2-4gb of data. There's no other way of putting it other than we are being robbed in broad daylight. This is now the 3rd month I've been negotiating with Telstra about these charges.
So who do I talk to to either get an ADSL connection and surely this price is wrong or just hasn't been updated? $115 for 15gb, everyone I've talked to has laughed and thought I was joking.
Have tried negotiating with Telstra for months now, as I said must be getting the wrong people. Have called the Ombudsman and was put onto someone who just spent a longer time telling me we can't have ADSL.
There is absolutely no justification for the price and for not being able to have ADSL.

Hi mate First of all, it sucks but telstra is not robbing you or doing anything wrong. When they say there is no "ports" they are correct, and it means there are physically no "spots" or "connection points" left at your local telephone exchange to connect an ADSL service or for that matter even just a "normal" landline connection. When the exchange was built no one could have predicted the massive future demand for internet. There are so many more houses, units, sub divisions etc then was forseen by ANYONE, not just telstra, combined with an insane increase in the amount of data demanded by each service. You asked about being put on a "pair gain" system. It's basically just a way of running multiple services down the one line- technical name is multiplexing. They invested in that technology so you would at least have a voice service, but as the line is already being used for more than originally designed for there's no way it could support a fast internet connection also. As for your location, when you were further out of town there would have been far less demand for ports, now you live in a city where the demand is much much higher. Disregarding that, it's often just a lottery whether you end up in a suburb with spare ports or not. Now look, telstra is a private company with shareholders to answer to, so why would they do anything which is not profitable in the end? They owe you nothing!! In fact my family and thousands of other aussies own telstra shares and i cant say i'd be happy if they were flushing our money away. These days internet is almost an essential utility which is why the PUBLIC sector is building the NBN. So if everyone will have that soon and copper will be redundant, why would telstra continue upgrading the old network in the meantime just to lose every dollar they spend? It does really suck but there's entire suburbs which can't get ADSL for the reason that they were built after the NBN was announed. As for mobile broadband, yes it's expensive. It's also quite expensive for telstra to provide it and their mobile towers are very limited in their total data output. This is why you pay far more for less. The more data people are downloading the less calls the tower can take. A single phone tower can often only support labout 200 calls simultanously., with some bigger towers with multiple carriers supporting around 1000. a single fast ADSL2 connection can get 20mbps peaks, well that 1000 call tower could only take about 12 x 20mbps internet downloads before it's maxxed out- thats with zero calls. Now think about how many people have mobile phones these days and what a critical service it is. The result is that carriers have to put a low cap the 3g/4g data allowances and aggressively price home wifi broadband Because the number of phone calls is highly variable and being the higher priority service, your internet speed will always depend on the number of calls being made. The tower will always drop your internet to bare minimum to try and connect every phone call if possible. In a way telstra, optus etc are just maximising their investments by selling off their "spare" 3g/4g tower bandwidth, it's super expensive but it's your choice too. They spent the money building the network so it's their reward for doing so. All you can really do sorry apart from moving is go on a waiting list for a spare port and wait for the NBN. The NBN will probably come before a spare port sorry!

Stream 8 tablet location does not work on T-mobile broadband

On my HP Stream 8 tablet, location works fine with GPS only (GNSS on; Mobile Broadband, Wi-Fi, and Bluetooth off).
However, if I turn on Mobile Broadband and connect to T-Mobile and turn off GNSS (or GNSS on inside where there is no GPS signal) and keep Wi-Fi and Bluetooth off, the location gives very odd results. Last week the map showed Phoenix as my location (I am actually located in San Francisco). This week, it gives Brentwood or Clayton, CA, both more than 30 miles away.
HP tech support said call T-Mobile. T-Mobile said they had occasionally seen equally odd locations.
I went to a nearby T-Mobile store. They had a Samsung Galaxy Tab 4 which always gave a correct location, within 100 feet using T-Mobile alone. Manually moving the map to a different location in an attempt to confuse it and turning it on and off, it would still find the correct location. No surprise there, my three year old Virgin Mobile LG android cell phone does just as good a job at finding locations.
(The T-mobile store also had an iPad Mini 3 that I was able to confuse. On T-Mobile alone and clicking on My Location in maps, it produced a grid that was blank except for a line saying that it was unable to find a location, no info or link to what to do next. The T-Mobile store did not have a Stream 8. The Microsoft Store has a Stream 8 but it is not connected to Mobile Broadband.)
Does anyone else have this problem? Is my unit defective? There are times that a GPS signal is unavailable and a T-mobile broadband signal is available, and it seems that this unit should be able to find a location at least as well as my cell phone.
Thanks.

I see the same basic results, wifi=off, bluetooth=off, gnss=off, t-mobile=on. Open win8.1 map-app shows my location in LA south of the 101/110 junction. I'm in SF Bay area near San Jose about 400 miles away. Turn on wifi and map-app shows me at my real address. With t-moile only, opened win8.1 IE, went to www.bing.com/maps location also shows LA.
My only t-mobile account is the stream8 free 200mb/month data plan, don't think they have my real address anywhere. My t-mobile "phone" number is 720 area code in the Denver area. No idea why middle of LA is the t-mobile location. Must be a "feature, not a bug".

Mobile Broadband with Gobi 2000 outside the US

Hi all,
Just got my X201 with a Gobi 2000 card inside. Since I live outside the US I was never really sure how it would work outside the AT&T and Verizon networks. Even after I received the Thinkpad it was not very easy to find information about how to set it up, so I thought I would post it here - I am sure someone is looking for it...
This is what I got: X201, Windows 7 Professional 64-bit.
First of all you are wondering where to put the SIM card. Take the Thinkpad battery out, and you will find the slot of the SIM. The cut off corner on the SIM should stick into the slot.
Next, you can use the Lenovo "Access Connections" software to make the connectivity, also outside the US. This is the same software as you use to to manage your Wifi - the one that shows Wifi signal strength in the Windows task bar.
(Note it should also be possible to use the Microsoft Dialup software, the the APN needs to be entered directly into the modem using "+cgdcont=1" - google that if you want to try.)
Back to Access Connections.
For someone new to Thinkpad, you may start with the Lenovo ThinkVantage Toolbox. That is the blue button on the keyboard, and the blue toolbox icon in the task bar. After you have done all your Lenovo and Microsoft updates here, you will notice an exclamation mark under "Security & Networking", "3G Mobile Broadband". It will essentially tell you: "A Wireless Wide Area Network (WWAN) card is installed in your system. Please run Lenovo Broadband Connect to activate your card."
This is somewhat confusing, particularly in the GSM world. What is it will do is not activating your Gobi 2000 card, but activate a subscription with a carrier in the US. Either an AT&T subscription, with an AT&T SIM and GSM/HSDPA, or a Verizon subscription with EVDO (which does not use a SIM). If you have put your European SIM in the Thinkpad this will lead you nowhere.
Just click "Ignore Issues" to get rid of the exclamation card.
Go back to Access Connections - just click on the Wifi signal in the task bar.
For the record, I am running version 5.61 of Access Connections. There is also 5.62 available for download, but it only seems to be adding Sprint settings, which we do not need outside the US.
Now, in Access Connections click on the "Location Profiles" tab, and up to the right do "Switch to: Advanced".
Now "Create...", so you can enter settings for your mobile network.
Give it a name, and as type of network choose Mobile Broadband.
Choose the Gobi 2000 hardware, and click next.
Next screen you will change the technology used from EVDO to HSDPA/GPRS, and finally get some life in the hardware.
Under Select WAN Settings you may choose to go Automatic, or Custom. I believe the Automatic covers about 30 non US networks, mainly European, but if your network is not covered, go Custom, and click Edit Settings.
Now you an choose settings from one of the 30 or so networks in the drop-down list, or just enter them by hand.
For the record, you just need the APN, the Username and the Password. There are the same settings you typically enter into your phone for GPRS connectivity, and they are probably available on your providers website. You will probably want to change your Authentication Option from PAP to NONE, depending on what your provider's instruction says.
For the record, for MTN Cyprus these are "internet", "wap" and "wap".
Click Next, and although the next page looks messy there is not really anything to change - just click Finish.
OK, we are done. Now you can test your connection, either by choosing that as a Location and clicking Connect, or by using the Mobile Broadband radio button and the Connect button.
You should now be able to use Access Connections as a single point to switch between Wifi and HSPA, and have no annoying exclamation marks from the Lenovo ThinkVantage - also outside the US.

pergranath wrote:
For the record, you just need the APN, the Username and the Password.
Perhaps that is all you needed, but there are definitely 3G ISPs in the world that will need somewhat more than that.
There are also 3G ISPs that check the IMEI of devices and will only connect devices thay have sold.
3G services globally are only semi-standadised, at best, in terms of what is needed to establish a connection and it it is quite important to pay close attention to all the information provided by the particular ISP that a connection is attempting to be established with.
Cheers,
Bill
I don't work for Lenovo

Mobile Broadband does not work on HP mini 110

This is the my device:
$ lsusb | grep Gobi
Bus 001 Device 077: ID 03f0:1f1d Hewlett-Packard un2400 Gobi Wireless Modem
sometimes another result:
$ lsusb | grep Gobi
Bus 001 Device 020: ID 03f0:201d Hewlett-Packard un2400 Gobi Wireless Modem (QDL mode)
I have installed in my netbook with these steps:
1. Install network manager: networkmanager, network-manager-applet. Then systemctl enable, start NetworkManager.service
Run "sudo NetworkManager".
2. Install BCM4312 and Hp un2400 gobi firmwares: b43-fwcutter. And b43-firmware, gobi-loader, gobi-firmware from AUR
Here is my /lib/udev/rules.d/60-gobi.rules, i have added the red line:
# udev rules for firmware loading on qualcomm gobi devices
ACTION=="add", SUBSYSTEM=="tty" KERNEL=="ttyUSB*" GOTO="gobi_rules"
GOTO="gobi_rules_end"
LABEL="gobi_rules"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9211", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="201d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f1d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="04da", ATTRS{idProduct}=="250c", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8171", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1410", ATTRS{idProduct}=="a008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="1774", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="fff2", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1557", ATTRS{idProduct}=="0a80", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9201", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9231", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1f45", ATTRS{idProduct}=="0001", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="16d8", ATTRS{idProduct}=="8001", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1199", ATTRS{idProduct}=="9000", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="241d", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9204", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9214", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9224", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9234", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9244", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9264", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9274", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8185", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
LABEL="gobi_rules_end"
3. Install wireless: wpa_supplicant, wireless_tools, gnome-keyring.
Then systemctl enable and start wpa_supplicant.service
4. Install modem manager: usbutils, usb_modeswitch, modemmanager, mobile-broadband-provider-info
Then systemctl enable and start ModemManager
After reboot, i get this log keep being repeat forever:
$ dmesg | grep ttyUSB
[ 8.783499] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 13.924825] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925166] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925490] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925813] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.926887] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 15.560838] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 15.562758] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
[ 17.869672] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.869883] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870123] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870366] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.872845] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.873762] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 17.874305] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874560] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874813] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.875605] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 18.845277] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 22.616332] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.616698] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617055] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617385] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.618447] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 23.560845] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 23.562771] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
Am i missing any configuration or installation?
Last edited by princenguyen (2014-06-19 06:30:17)

Hello,
Did you find a solution because I am having the same issue with my Sony Vaio SA. It has a Gobi 2000 and works perfectly on Ubuntu 14.04 and all other distributions I have tried so i know the hardware is fine.
I dont get the message repeating although I can get it like that by using the firmware from the AUR. If I use the firmware I got from my previous Windows installation then the error only occurs when turning the device on. This is so annoying
I get the following:
NetworkManager[1787]: <info> (wwp0s26u1u4): DHCPv4 state changed nbi -> preinit
Jul 08 23:40:11 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting an IPv6 router
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting a DHCP lease
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: nonzero urb status received: -71
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: wdm_int_callback - 0 bytes
Jul 08 23:40:12 Raspberry kernel: usb 1-1.4: USB disconnect, device number 9
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[3049]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: dhcp if_readrawpacket: Network is down
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0 wwp0s26u1u4: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (net/wwp0s26u1u4): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[5345]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (usbmisc/cdc-wdm1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'pds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'pds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wms' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'nas' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'nas' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'dms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'dms' client with ID '1'
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): deactivating device (reason 'removed') [36]
Jul 08 23:40:12 Raspberry dhcpcd[5345]: received signal TERM from PID 1787, stopping
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: removing interface
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.1: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.2: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.3: device disconnected
Jul 08 23:40:13 Raspberry dhcpcd[5345]: exited

ASA 5505 VPN and Sprint Mobile Broadband clients.

I have a strange problem, it's something that just started recently when we had a user try to gain access with a Sprint Mobile Broadband card. We have quite a few remote users, probably not more than 6 ever connected to the VPN at once, and I have not heard of any issues until recently. We are starting to require more travel to remote locations, so the use of the hotel internet, as well as Sprint mobile broadband is becoming more important.
There are a few issues here. Everything is IPsec.
Mac OSX with VPN client version 4.9.01 will connect to the VPN when connected to a normal internet connection, but as soon as it gets on the Sprint Mobile Broadband device, it connects for exactly 5 seconds and disconnects.
Windows XP Pro, has no problems with normal internet, on the wireless broadband modem, it will connect to the VPN, but have no access to internal resources or access to the internet.
Windows Vista, has issues all the way around, but mainly when connected to the wireless it has the same issues as XP minus the internet browsing.
Strange thing is, all these problems seem to been different, but they all started around the same time. I have been testing everything I can think of. Talked to Sprint, which the lady there was actually very helpful...just have to get to the right person. But nothing we tried did any good.
Does anyone know of any settings on my ASA that I need to change in order to get these types of connections to work?
The best part of all this is that my Linux machine can connect/surf/and browse the internal network through the VPN just like it normally would work.
Something has to be wrong with my client config settings that is causing this to happen.

Have you enabled NAT Traversal? (Both on the Client and ASA)
That would be the first thing to check.
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
Regards
Farrukh

Is it possible to upgrade to usb2.0 on my old nx9005 so i can run a mobile broadband dongle

i have an old compaq nx9005 laptop and would like to run a mobile broadband dongle. is it possible to upgrade to usb2.0? i,m running windows xp and have service pack 2.
many thanks
twidge57
This question was solved.
View Solution.

Hi,
Unfortunately this is not very simple BUT you can use PCMCIA and 32-bit Cardbus slot and buy something like this for your machine:
http://www.amazon.co.uk/Nisis-PCMCIA-USB-2-0-Card/dp/B00027YIJK
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

Thanks,
Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
But thank you for your reply!

Telstra 4G Mobile Broadband

Similar Messages

Maybe you are looking for