Telstra Air - Cable Hot Spot firmware update ?

I have the Netgear C6300BD, also known as Telstra Gateway Max ! Now over the phone I was told that cable in my area (HFC 3.0) has not been yet enable for Telstra Air..it reuires a firmware update to be available..meaning I can not see the SSI Telstra Air in my garden for all the visitors to use Do we know when this will happen ? I used to see a lot of the free wifi specially on Public phones etc..but I dont see they are operational anymore. I am a Blackberry user so I depend on the SSID to be broadcasted to use the service...

Hello Gerry....Here is a "ready made" explanation of how it works......https://www.telstra.com.au/broadband/telstra-air/how-it-worksCheers

Similar Messages

N80 TV out cable compatiblity via Firmware update!

yea like N93,N93i,N95& now new nokia devices like Nokia 6500 slide,all got tv out cable connectivity,so you can see your pics &,surf the web on a tv screen etc.
I just want to ask the Nokia Software updater Team that Is this possible that we might get the Tv out cable connectivity with the upcoming N80 firmware?
I think N80 can be connected to tv via Nokia AD-15 plug,just need the required components in the upcoming firmware.thanks

Because the phone lacks the required electronics to generate a TV signal.
If you want a phone that supports a TV-out signal, switch to an N93, N93i or N95; at least those do.

HT1695 no wifi/bluetooth/hot spot after updating to 6.1.3 - buttons greyed out!! have done all suggestions on discussion sites - GRRR!!!

like so many in the past week . . . iPhone 4S . . . had advised friends etc not to update . . .

If no change after restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem.

Hi i am using personal hot spot before updating 6.1.3.now iam using ios 6.1.3 version the personal hot spot is not working..can you please help me on this?how to use that,its in a default mode?

Hi previously i use personal hotspot,after updating my 6.1.3 ios in india iam not able to use that.It is in a default mode.
Can you please help me how to use personal hotspot.
Thanks,
Goutham.

Im really good at programming but really suck at algorithms
>If your are 'really good' at programming, you will be able to solve this problem. Because, it has nothing to do with algorithm.
>>can someone please please write in a algorithm form for me , i need it by friday i would greatly be thankful for u
>Wrong person, in the wrong place.

Firmware update - Cable Telstra Gateway Max - Netgear C6300

Firmware update - Cable Telstra Gateway Max - Netgear C6300
Good news. Over the next couple of weeks we will be rolling out an update to our Telstra Gateway Max. The firmware updates will roll out in the early morning and this process is expected to finish by mid May for all devices.
The current firmware: Version 1.01.06
The upgraded firmware: Version 1.04.02
UPDATE 10/06/2015
I have confirmed that the roll out was halted so that additional fixes can be included. Those who already received the most recent update will also receive the next update.
This should resume over the next few weeks.
What you need to do
Nothing. The new firmware will be remotely upgraded on active Cable Broadband services that have this gateway connected. The upgrade will occur during the early morning so as to minimise disruption to the customer. The gateway should automatically go through the process of upgrading and come back online when finished. All settings will be retained.
If you experience any issues with the gateway not coming back online, restarting the gateway should resolve in most instances.
Customers who connect a new modem after the roll out has been completed, can expect their modem to be automatically updated within 48 hours of registration.
What’s better
The majority of the updates are improvements the previous firmware version. These include:
• Flexibility in supporting larger external media storage devices such as external hard drives and USB sticks
• Greater stability in the Wi-Fi
• Improvements to VPN tunnelling functionality in the gateway
• Media streaming improvements
• General gateway Control Panel (GUI) look and feel improvements
What’s new
1. Wi-Fi Mesh, is a new feature that is developed to work in conjunction with supported Telstra Wi-Fi range extenders. It allows for a single wireless network name to be shared by all devices and automatic connection to a stronger Wi-Fi signal source within your home.
The Telstra Wi-Fi Extender Max is expected to be launched in late May.
2. “Time of Day Parental Controls” feature, giving customers the ability to put rules on individual devices connected to their gateway, based on time. This complements the already existing “Keyword Filtering Parental Controls” feature that was already available, giving customers greater control over the viewing habits of users.
Customers can access this new feature by logging into the gateways’ Control Panel via the Basic or Advanced menu. To do this:
i. Type in http://telstra.gateway/ in a web browser on a device that is connected to the gateway (either via Wi-Fi or Ethernet cable)
ii. Begin Parental control feature
a. via the Basic Menu by clicking “PARENTAL CONTROL” along the top menu and select the “Time of Day Access” tab
b. via the Advanced Menu by clicking “ADVANCED VIEW” along the top menu and select the “Time of Day Access” along the left hand side menu
iii. Click on “Add Rule”
iv. Setup a rule that applies to the customers’ needs and click “Apply” to Save.
Rules can be applied for each individual device or by network type i.e. Ethernet or Wi-Fi.

Professor Phone
I am not a Telstra employee. I have been a mobile customer since 1963
Who are you? Get Smart with the shoe-phone? There were no mobile phones in 1963.

Cable gateway max C6300 firmware update in bridge mode

Hi, does anyone know if the gateway max cable modem (netgear C6300) will still get the OTA firmware update if it's in bridge mode? I've given up waiting for fixes and am going to put my own router and access point in. Thanks

As long as it has a connection to the internet, I am pretty sure it will get an update.
You could try live chat maybe they have a better answer
https://livechat.telstra.com/TCOM:Crowdsupport:Consumer
Since it's a staggered release some modems won't get updated till July

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Can't install os mavericks because don't have macbook air flash storage firmware update 1.1; can't install firmware update because OS is too old (10.7.4)

Hello, I have a Macbook Air, bought May 2012 or so that came with OS 10.7.4 on it. Did not try to upgrade OS until recently. Tried to upgrade to OS Mavericks, however received error message 'Before installing OS X Mavericks this system requires MacBook Air Flash Storage Firmware Update 1.1." I then downloaded and attempted to install said Firmware Update 1.1, but received another error message, to wit: "This update requires 10.7.5 or 10.8.5 or later"
Who can help me out the this Catch-22? I thought about first updating to OS 10.8, but apparently that is no longer available?

Hi CursedIn,
If the Firmware update required for Mavericks requires 10.7.5 to install, you may be able to download it directly from the following link:
OS X Lion Update 10.7.5 (Client Combo)
Regards,
- Brenden

Macbook air is stuck in a reboot loop after running Software Update. It looks like a firmware update is failing.

I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
Does anyone know how to disable these little beasts?

Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

My iPhone5 is my wifi hot spot for my mac mini computer and iPad. I live in a rural area. Will this be sufficient to run apple tv and air play?

My iPhone5 is my wifi hot spot for my mac minim computer and iPad. I live in a rural area with no other options. Will this be sufficient to run Apple TV and air play?

If you are intending using your hot spot to download movies for the Apple TV, you'll very quickly eat through your data allowance.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

Firmware update on a Macbook Air 2011

Hello guys, i have a Macbook Air 2011 that had the hard drive damaged, i installed a new one so him only starts on the Utility Page for Reinstall the OSX...
This version of Mac Air are with troubles to Download/Reinstall the OSX using the Utility Page, him needs a Firmware Update to fix, but i just can't open that Update on the Utilities Page, i tried to put the Update Archive on a Pendrive using other Mac, and i just put the pen drive on the Mac Air and tried to execute the update file using the Terminal, but i got the error: cannot execute binary file.
So how i can fix that Mac?
I can't execute the Firmware update, and without fix the firmware update i can't install the Osx, i also tried to install a new version using the USB Drive Bootable Mountain Lion, but this kinda of Macs Air 2011 only accept a custom Lion OSX, that can be downloaded after the Firmware fix..
Hope someone can help!
Thanks

You replaced the the SSD in a MBA that cannot be user serviced, so that's quite an accomplishment. Your model does not require a firmware update to use Internet Recovery - Computers that can be upgraded to use OS X Internet Recovery. Here's the process you follow:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times. I have no Thunderbolt cables connected.

Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times. I have no Thunderbolt cables connected. I am running OS X 10.9.5.

Hide Update in Mavericks
Try re-indexing Spotlight.
Spotlight – Re-index

Can't install MacBook Air Flash Storage Firmware Update 1.1

My macbook air is mid 2012
And I just update the mac on Oct 15
And today I heard about the ssd failure thing.
I head to appstore and find 0 updates there.
Then I download the MacBook Air Flash Storage Firmware Update 1.1 here http://support.apple.com/kb/DL1690
And it says "This computer does not need this update"
Does this mean my mac is good? Or not?

dknyxh wrote:
And it says "This computer does not need this update"
Does this mean my mac is good? Or not?
Firmware update tests the computer first to make sure that the SSD is not a faulty one.
Then update will not be installed and returns the message
"This computer does not need this update".
Does this mean my mac is good? Or not?
Your Mac is good.
Best.

MacBook Air SMC Firmware Update v2.0 update available again and again. How do I fix it?

I have installed MacBook Air SMC Firmware Update v2.0 three times and I still get an update available notification asking to install it again. This is a mid-13 MacBook Air running OSX 10.9.3. System info lists the SMC version as 2.13f7.
Does anyone know how to resolve this issue?

Hi,
- Are there any status or error messages in /var/log/install.log
- The Firmware version it should install is 2.12f137
- If there isn't anything in the log try:
Intel-based Macs: Resetting the System Management Controller (SMC)
and/or About NVRAM and PRAM
and check whether there is installation.
If no install, try OS X: What is Safe Boot, Safe Mode
then reboot normal, try the install again.
Hope this helps

Telstra Air - Cable Hot Spot firmware update ?

Similar Messages

Maybe you are looking for