[TEM/Ad hoc Query] Showing Invalid Relationships in Ad Hoc Query

Hi Experts,
In our system, during internal transfers Persons, a new Personnel number is created for him/her. The old Personnel Number was delimited (Termination Action) and is stored in an Infotype as an Inactive Personnel number of that person.
We are planning to copy an Inactive Personnel number's past A025 Relationships (Business Event is attended by) to its Active Personnel Number. So that the Active Personnel will keep the record of the Complete History of trainings taken by the employee.
The problem is that in Ad Hoc Query. The copied A025 Relationships of the Active Personnel Number is not shown since it is not a valid relationship. (The validity period of the A025 relationships that was copied from the Inactive PERNR, is outside the validity period of the Active Personnel Number.)
Is there a way to make Ad Hoc Query recognize these invalid relationshps?
Points to those who can help.
Thanks.
Regards,
Olekan Babatonde

Logically the system will not accept an attendee to attend an event before his hiring date.
You have to try some other way

Similar Messages

  • Arabic data shows Invalid characters

    Hi,
    Arabic data is stored in 9i database having US7ASCII character set. Our vendor application is displaying data in arabic correctly but when we try to query data then we are getting characters like
    mMml aaEa_JQfdmGJ
    Regards
    Ahmer

    I have tried to display data in ASP, SQLPLUS, SQL Developer & SQL Navigator. All of them are showing invalid except SQL Developer which is showing boxes.
    I am only querying the data that is already present in database and vendor's application displaying correctly.
    I tried with changed NLS_LANG but it did'nt works.
    When I ask the application vendor, they replied me:
    "Arabic Data can be viewed in Multibyte telnet clients like Putty, if UTF-8 text encoding is enabled, both in the client and Oracle. The character encoding should be set to UTF-8 only during download of data and then this can be viewed in the telnet client.
    Normal single byte telnet clients cannot encode the same, and the arabic data will be shown as Junk characters. Else, the same can be spooled into a text file, opened in MS-Word with the character encoding set as UTF-8 format."
    I have to generate report for wondows client.
    Regards

  • Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

    Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
    What can I do to get it to work again as more than an overpriced paperweight?

    Hello,
    Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

  • Error 1073807302 while connecting a third party USB device,and showing invalid setup

    While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk in pipe and in VIEW ATTRIBUTE Tab it is showing invalid property....
    please kindly reply me.....!!!

    sir,without configuring in NI-MAX how can we open a connection to VISA.
    If i install the device driver provided by supplier,i am not able to view my device in NI-MAX,so that, I had created and installed .inf file for my device using VISA driver wizard, In NI-MAX now I can see my device and its properties in visa interactive control.But it was showing some errors(Error-1073676418,error-1073807302,error-1073807298),in the USB settings Tab it is showing, "No pipe present in Bulk In-pipe", and in VIEW ATTRIBUTE Tab it is showing invalid property.In program it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,
    While Searching in ni.com, some one posted that change the USB Alternate settings to 1/2/3,default value is 0,but now also my problem is not solved.
    I am using VIATOR USB HART modem, Model 010031.

  • Exchange Server 2013 with 3rd party wild Card Certificate shows Invalid

    Hi Team,
    I've Exchange Server 2013 SP1. Imported a valid 3rd party wild Card Certificate but the status is continuously showing  "Invalid" on all my 2013 servers. Any help?
    Thank you.
    Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

    Hello,
    Can you enable it on the Exchange Services like, IIS, SMTP without any issues?
    If the certificate is for OWA, is there any certificate issue when you accessing OWA?
    Run the following command to get the Exchange Certificate information and post them for researching:
    Get-ExchangeCertificate |FL
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • TS1292 i got an itune card after I hit the pin in it show invalid number, so how to make it work?

    I got an itune card after I hit the pin in, it show invalid number so how to make it work?

    See Here  >  iTunes Store: Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India.  I am trying to use Airtel sim but the phone is showing invalid sim.  So please help me out to unlock it.

    I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India.  I am trying to use Airtel sim but the phone is showing invalid sim.  So please help me out to unlock it.

    No one here can help you, & Apple can't/won't help you. Fact is, there is no way to get that iPhone officially unlocked. Only Softbank can authorize the official unlocking of your phone, but they won't. Softbank does not offer official unlocking for any iPhone.
    It is what it is.

  • Phone is showing invalid sim sos only in top left corner, why??

    why is my phone showing invalid sim and sos only in top left corner, currently using pre paid! ?????

    never mind all fixed..just pulled sim out and backin!!

  • Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim

    please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.

    ASk your friend who unlock the phone for him/her.
    ONly the carrier that the phone is locked to is authorized to unlock it.
    bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier.

  • ITune 12.1 update fail by showing invalid signature

    I cannot download iTune 12.1 in both download only and download and install options by using Apple Software Update even I have iTune with valid ID in my computer. The download has never finished, showing invalid signature.
    Any good reason and help.

    Hey mewinkoko,
    If you are having an issue with installing an update to iTunes for Windows, I would suggest that you troubleshoot using the steps in this article - 
    If you can't install or update iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • HT3541 I try to buy a music video from the iTunes Store but it declined my card and it shows invalided card can you please help me

    I try to buy a music video from the iTunes Store but it declined my card and it shows invalided card can you please help me

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    edd125 wrote:
    ...the iTunes Store but it declined my card
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552

  • HT201328 My unlocked iPhone 4 shows "No Service" and after airplane mode turned on and off, shows "Invalid SIM"

    I recently bought two iPhone 4 phones from my colleague in USA. He unlocked these phones from AT&T. But I did not test it. However, now that I am back to India, and inserted my Indian Vodafone SIM car, the phone shows "No Service" and if turn AirPlane mode ON and then OFF, a message comes as "SIM Failure", and the top left corner shows, "Invalid SIM".
    Now, how do I confirm whether my colleague was successfully able to unlock these phones ?
    What are the steps to make my Indian Vodafone SIM work ?
    Any support appreciated.

    Hello there Vicky,
    Here is a great article for troubleshooting the Cellular connection on your phone. From article iPhone: Troubleshooting a cellular data connection found here http://support.apple.com/kb/ts3780:
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    Restart your iPhone.
    Ensure that your software is up to date:
    Check for a Carrier Settings Update. Tap Settings > General > About.
    Check for an iOS Software Update. Tap Settings > General > Software Update.
    Note: Some updates may require a Wi-Fi connection.
    Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to:
    Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
    Verify that there are no account-related blocks.
    Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    In order to verify if the phones have been unlocked, the original carrier for them would have to be called.
    Take care,
    Sterling

  • Database upgrade to 10.2.0.4 error - oracle RAC status showing Invalid

    Hi all,
    I am getting this error during database upgrade to 10.2.0.4 error - "oracle real application clusters status invalid. "
    I am getting the above error after running catupgrd
    and checking the status SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
    This is not a RAC database and this is the only components which shows INVALID.
    Is it normal? Please advice me the action/steps to take to rectify ASAP as it is urgent ... Thanks & Regards, Deepak Gupta

    Probably database was 9i and it was upgraded to 10g?
    It can be normal situation.
    Please check metalink note 312071.1
    If database is not rac, then simply ignore this status as workaround is quite difficult and definetely it's not worth to go for it.

  • License Status showing Invalid License for SAP CE7.2

    Hi
    I have installed and configured SAP CE7.2 in windows with oracle.
    Recently when i check the CE7.2, Java engine was stopped due to invalid license.
    After that i requested for permanent license key from SAP then i have applied the same license file in CE7.2 but no luck still it showing: License Status is Invalid.
    Installed license in the path, please correct me if i am wrong.
    logged into NWA and Configuration Management > Licenses...
    Tried installing the license several times but no use, still its showing Invalid License in LICENSE STATUS and also i am not able to bring the Java engine UP.
    Can anyone help me to resolve the above issues.
    Thanks in Advance.
    Regards,
    AS

    Hi Shitij
    Yes requested for permanent license only.
    I have selected
    Product:  SAP Netweaver CE
    Product Version :   CE 7.20
    Technical Usage: Composition Environment platform
    DB:   Oracle
    OS:   Windows
    validity was showing 99991231
    Thanks
    AS

  • Discoverer Report showing invalid characters in the report data

    Hi,
    Can you please help me. I have designed a discoverer report in discoverer desktop 4i, when it is running the data showing some invalid characters in the data like below.
    kara¿ah     L¿MAK HOLD¿NG A.¿
    I have executed the same query in sql plus at that time the data shows correctly. Please let me know, is there any settings required.
    Best Regards,
    Umamaheshwar.

    Hi Umamaheshwar
    This could be a registry setting. Let me give you some background. In the Windows registy, every Oracle Home has a setting called NLS_LANG. This is the variable that controls, among other things, the numeric characters and the language used. The variable is made up of 3 parts. These are:
    language_territory.characterset
    Notice how there is an underscore character between the first two variables and a period between the last two. This is very important and must not be changed.
    So, for example, most American settings look like this: AMERICAN_AMERICA.WE8MSWIN1252
    The second variable, the territory, controls the default date, monetary, and numeric formats and must correspond to the name of a country. So if I wanted to use the Greek settings for numeric formatting, editing the NLS_LANG for Discoverer Desktop to this setting will do the trick:
    AMERICAN_GREECE.WE8MSWIN1252
    Can you please check your settings? Here's a workflow:
    a) Open up your registry by running Regedit
    b) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
    c) Look for the Oracle Home corresponding to where Discoverer Desktop is installed. It's probably called KEY_ORANT
    d) Clicking on the Oracle Home will display all of the variables
    e) Take a look at the variable called NLS_LANG - if it is correct Exit the registry
    f) If its not correct please right-click on it and from the pop-up select Modify
    f) Change the variable to the right setting
    g) Click the OK button to save your change
    h) Exit the registry
    Best wishes
    Michael

Maybe you are looking for

  • How do I create a new ID without losing any accumulated information?

    Hi, My wife has an iphone 4 and an ipad and I have an iphone 4S but it is all on one Apple ID. I want to separate her onto her own ID. Is there any downside to doing this? How do I go about doing it? Do I or does she lose access to any information, s

  • Setting the background color of the selection when text selected (input TextField)

    My input TextField has a black background. The problem is, when some text is enter and then selected, the selection background color remains black and the selected text remains white. Because of this it's imposible to tell that the text has been sele

  • Alpha properties in a dynamically generated movie

    the situation: i have to dynamically generate a movie clip inside the already created movie clip i have two event controllers which ( SHOULD) set the _alpha state of two instances( which happen to be 2 diff key frames of one animation sequence turns

  • Save As...  Indesign (2014) seems to break files.

    A typical workflow for our Creatives is: Once original is set up. a few days later someone wants a change to it. They typically open the file, chose Save As... Create a V2 or V3 and save it. And make the changes to the new version. If the file was or

  • Details of SAP Certification Cost in different countries

    This is Vijay. i had a strong work experience in SAP ECC6 FI as END USER, planning to do SAP FI CERTIFICATION in Dubai / Singapore, can I enroll only for the exam without enrolling for classroom/online training, as I am good enough with the subject a