[TEM] Allowing Basic Transaction maintenance of Relationship IT.

Hello Experts,
User wants to allow creation of relationship A025/B025 (is attended by/takes part in) between Business Events (E) and Person (P) using Basic Transaction. (PP01 or PP02)
I've check the "No maint" in T778V in the Allowed Relationship for E to P on A025 and its counterpart B025.
Time constrainst for each relationship subtype A025 and B025 for E is also set up.
However when I try to create the relationship in PP02. E 1001 A025 P, I am getting the error:
"Protected tab titles are not supported (tab TABSTR_025 title TAB1)"
Points to those who can help.
Thanks
Regards,
Olekan Babatonde

Hi Noobie )
(despite of your name you don't seem to be that clueless ) )
I have done a research and found some other customer messages dealing with the same problem within SAP.
The fact is, that the relationship 025 cannot be maintained via basic transactions (pp01, etc.) in our standard, but in the transactions of Training and Event
Management.
'Protected' in this case means, that the flag 'input' for the pushbutton of the tabstrip is set to 0. For a normal pushbutton this is allowed, but not for a pushbutton which is the title of a tabstrip. As a solution, you need to reset the attributes in the PBO.
I have found additionally an SAP note: 185036 -> Transaction variants for TabStrip controls
According to these modifications I also would like to warn you that the changes and the side-effects wont be supported by the SAP.. This must be considered before doing changes.
Hope this helps.
Have a nice day!
Best regards,
Zsolt

Similar Messages

PP02 BADI that would allow change to maintenance of relationship

Hello,
Can anyone tell me if there is a BADI available when using PP02 or PO13 that would allow me to change which relationships can be maintained based on the user? Table T777E has the switch and in most cases, we don't want to allow maintenance on certain realtionships but on occasion, something gets screwed up and we need to maintain a non-maintainable relationship. Rather than changing the table entry and transporting it up to our Production system each time, I would like to add code that says if the user has a certain role then they can maintain any relationship no matter what the field in T777E has.
Is it possible?
Thanks,
Diane Merrill

for PP02,
ARC_BC_HROBJ_CHECK                      Archiving Object BC_HROBJ: Archivability Checks
ARC_BC_HROBJ_WRITE                      Archiving Object BC_HROBJ: Additional Table Entries
HRBAS00_RHBAUS00                        Business Add-In for RHBAUS00
HRBAS00INFTY                            Update By
HRBAS00_GET_PROFL                       Determine user profile from table T77PR
HRBAS00_RELAT                           HR: Exit for Relationships
HRBAS00_SEARCH                          HR: Object Search
HRBAS00_STRUAUTH                        Business Add-In for Structural Authorization
HRBAS00_T77S0                           HR: Switch Attributes
for P013
ARC_BC_HROBJ_CHECK                      Archiving Object BC_HROBJ: Archivability Checks
ARC_BC_HROBJ_WRITE                      Archiving Object BC_HROBJ: Additional Table Entries
HRBAS00_RHBAUS00                        Business Add-In for RHBAUS00
HRBAS00INFTY                            Update By
HRBAS00_GET_PROFL                       Determine user profile from table T77PR
HRBAS00_RELAT                           HR: Exit for Relationships
HRBAS00_SEARCH                          HR: Object Search
HRBAS00_STRUAUTH                        Business Add-In for Structural Authorization
HRBAS00_T77S0                           HR: Switch Attributes

Basic Transaction Codes for RailCAr Management

Hi,
I am looking for some basic Transaction Codes for Rail Car Management especially loads and unloads.
Anyone please?
Regards

Hello Shirley,
I assume that you are using either Event Management to collect the load/unload events OR your manually entering this data onto the Freight Unit?
If the answer to the above information is correct, then it would depend where you are storing this data. Are you adding the data to the Freight Orders or to the Freight Units? If you are using FOs then some of the fields might be present on the FO work list and you could create a query/view there to view this data. There is also a work list on the FWO side but it would only contain a summary of the FUs. That is due to the one to many relationship between FWOs and FUs.
You might be better off building an ALV report to gather the fields that you need. Alternatively this could be done in SQVI but it is more limited.
An alternative to all of this if your using Event Management, is that you could produce a report in EM to give you this information. This however would only be possible if you are sharing all of the info that you need in the report with EM.
Hope that helps
Devin

Basic transaction for IDOC

Hi all
Can any one give me the basic transaction list for IDOC??
Thanks and Regards
Arun Joseph

Hi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
check the following Links
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
ALE and IDOCs
iDocs
IDOCs !!!!!! need your help
idocs
ALE, EDI and IDOCS
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Regards
Kiran Sure

No Addon Product Version allowed for transaction

Hello Gurus,
we want to update some of our ERP 6.0 Systems. All of it have implemented EHP4.
But if we check for packages with MOpz, we get the following error:
No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01
SolMan is at version 701 SP24.
We use the Lanscape Verificartion Tool and it lights green for all systems.
The following notes for LV are implemented.
1484609
1485671
1501586
1506251
1506730
1510273
1511818
1516332
1517258
1525078
1528030
We have read http://wiki.sdn.sap.com/wiki/display/SM/TroubleshootingofMaintenance+Optimizer
For the systems we chosed ERP 6.0 + EHP4 FOR SAP ERP 6.0 / NW7.01 as active product versions
Has someone a suggestion whats the problem?
regards
Chris

Hi,
Check SAP 1505281 - No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 for your problem.
Thanks
Sunny

Does Entity Bean allows Programmatic Transactions.

Hi,
I would like to know whether Entity beans allows Programmatic transactions. If they are not allowing then, if we want to abort the transactions then how we can do that.
Regards,
Satish. G

In case ur application throws runtime exception u need not worry about aborting the transaction. container takes care. suppose based on some condition (or possibly application exception where container won't do rollback automatically) if u want to abort / rollback the transaction you can call setRollbackOnly() of EntityContext which informs the container not to commit the transaction
- Paul

Types of special G/L transactions and their relationship to the GL

Dear all,
I don't understand about the difference between three types of special GL transaction ( Free offsetting entry, statistical offsetting entry, and Noted items ) and their relationship to the GL.
Please tell me about accounting entries, accounting process per type and give me some detail examples per type to use in system SAP
guide me step by step
and tell me how to configure it
Thank in advance
Minh

Hi,
Please make Down Payment request and then make Down Payment then make Invoice and then clear the Down Payment. If any balance is left over make incoming payment through F-28 and here u need to select the downpayment document also.
If no incoming payment is there u use F-03 and clear the documents manually.
Regards
balaji

TECO Status in WBS ELement not allowing DP91 transaction for RRB

Hi Team,
I would like to look if DP 91 will not allow to Bill a particular cost once the project is in TECO Status.
Please confirm if this is configurable.
Regards
Vignesh R

Thanks for your clarification.
I have one more query which is not related to the Project status.
When a Dynamic item is being populated in DMR after DP91 transaction,the summarisation of material or activity takes place and If there are A(50$),B(25$),C(25$) are the materials posted and grouped to form Dynamic Item "Material" and E(100),F(50$),G(50$) are the activity posted and grouped to form Dynamic item "Labor" based on grouping set in material determination,
the DMR will reflect as
Line               item 10
Material         Material
Price             100$
Line                item 20
Material          Labor
Price              200$
My client need a report which would give a detailed list of Dynamic item along with quantity and value by just entering the Billing document number.
Like
Material
A   50$
B   25$
C   25$
Labor
A 100$
B 50$
C 50$
What are the tables I need to refer to bring up a report as stated above.
I couldnt get these details in AD01DLI and AD01DLIEF
Regards
Vignesh R

After TECO system not allow any transaction for orders

Dear all,
We have taken TECO for Production / Process orders but system is allowing to cancel confirmation / to cancel GRN / to cancel operations.
Actually we dont want to cancel any of the above said after TECO.
How to restrict this one. Explain very clearly if it is possible.
Thanks,
Regards,
Sakthivel.S

Hi sakthi vel
You should go to transaction BS22, then click on status I0045
After that change RMRU, RMWA and RMWF from Allowed to Forbidd.
The problem will be solved.
Regards
Dinh Trung Tin

IO Allowed Business Transaction FI Posting

Dear All,
I am trying to add business transaction FI Posting allowed for the order, can you please guide me where and how I can add that, currently it is showing in red.
I tried through KO02, it is not allowing to add any new business transaction
Thanks in advance for your quick response
Thanks
Prakash

Hi,
Firstly Release the Internal order as explained above.
In case, it is still not allowing FI postings, look at the User defined Status and check whether the existing status is allowing the FI postings are not. If not change the status to another status which allows the FI postings.
Thanks
Siva

CS5 GPU advanced prefs will only allow "BASIC" what does this limit me to?

It seems my ATI X1900 with 550MB RAM is not on the ADOBE tested list so that under Prefernces GPU/ADVANCED I can only use the BASIC setting. Can I use Scrubby Zoom?
What features will I NOT be able to use when set to BASIC GPU?
Will Adobe ever allow the ATI X1900? It has lots of memory...

Basic Mode: Uses the least amount of GPU memory and the most basic OpenGL features. (Photoshop CS5)
Normal Mode: Uses a large amount of GPU memory and advanced OpenGL features to perform color matching, tone mapping, and checkerboard blending. (Photoshop CS5)
Advanced Mode: Provides all the benefits of Normal mode, but additionally employs newer OpenGL advances that often result in improved performance. (Photoshop CS5)
http://kb2.adobe.com/cps/404/kb404898.html

[TEM/Ad hoc Query] Showing Invalid Relationships in Ad Hoc Query

Hi Experts,
In our system, during internal transfers Persons, a new Personnel number is created for him/her. The old Personnel Number was delimited (Termination Action) and is stored in an Infotype as an Inactive Personnel number of that person.
We are planning to copy an Inactive Personnel number's past A025 Relationships (Business Event is attended by) to its Active Personnel Number. So that the Active Personnel will keep the record of the Complete History of trainings taken by the employee.
The problem is that in Ad Hoc Query. The copied A025 Relationships of the Active Personnel Number is not shown since it is not a valid relationship. (The validity period of the A025 relationships that was copied from the Inactive PERNR, is outside the validity period of the Active Personnel Number.)
Is there a way to make Ad Hoc Query recognize these invalid relationshps?
Points to those who can help.
Thanks.
Regards,
Olekan Babatonde

Logically the system will not accept an attendee to attend an event before his hiring date.
You have to try some other way

Basics of SCCM - WSUS Relationship

Hi all,
Just had a question about how updates in SCCM 2007 work. At a very basic level, I understand it to work like this:
SCCM Side: WSUS syncs with Microsoft to build metadata list of all available updates > SCCM leverages WSUS metadata to provide a list of available updates visible under "Software Updates" in SCCM console >
SCCM Admins can then created Update Lists and Deployment Packages based on the wsus metadata > Deployment Packages are applied to Collections
Client Side: CCM client runs an update scan > CCM client leverages the machine's WUA to check available updates on the SCCM server > CCM Client makes a list of the updates that it needs but does
net yet have installed > downloads the updates and installs them from the DP
My question is about what source the CCM client/WUA uses to check which updates are available. Does it simply check the update packages which have been applied to all those collections that it happens to be a member of?
Also, is WSUS completely passive in this whole process - i.e. is it merely a conduit for SCCM to source metadata about available updates?
Thanks for any help!

A handful of comments here:
First, don't confuse packages with deployments. They are two different things in both 2012 and 2007. Packages are simply the binary files that ConfigMgr places on DPs. Clients download the binaries from these when they are needed. Deployments determine what
updates are assigned to or required on clients.
As mentioned, update metadata, basically the definition of all possible updates and how to know what systems the updates apply to comes from the WSUS instance corresponding to the SUP.
The scan cycles kick the WUA into action to scan for updates. The Normal scan cycle is like an incremental and the re-eval cycle scans for all deployed updates to make sure that they are still installed and reinstall them if they aren't. The normal scan
cycle is kicked off at various other times also linked with deployments.
Finally, for using the required attribute, which is reflective of how many clients need a particular update, I think this a reactive approach that is anti-security as it reflects the past and not the current state of the environment. Granted the past may
only be a day ago; however, in security terms, that doesn't matter. Being pro-active in this case, i.e., making all potentially applicable and in-scope updates available comes at the cost of disk space, nothing more. Thus, I generally recommend against using
this attribute.
As for WMI, think of ConfigMgr as a WMi automator -- just about everything that ConfigMgr does involves WMI. In simple terms, WMI is just a DB storing info on local systems.
Jason | http://blog.configmgrftw.com | @jasonsandys

Multiple EANs per article in Basic Data Maintenance (Retail Master Data)

Hi,
Does anyone know how to prevent users from entering an EAN twice for an article?
Example: EAN 123456789 for article AAA with unit of measure PC <i><u>cannot be used</u></i> for the same article AAA with unit of measure CS.
Thanks.

Dear Winnie,
Yes....this is possible and this is pre-requisite condition in Retail Master Data(transacion code MM41)
Go to transaction code OMT4 and change following message number from warning to error.
Application: M3
Message No: 347
Message Text: EAN already used for unit of measure & of this article
If this message is not exist, insert the same.
Bye,
Muralidhara

PeopleSoft Basic transaction

Hi everyone,
My system: Windows Server 2008 R2 ; Oracle DB 11g ; PT 8.52 ; PeopleSoft Human Capital Management and Campus Solutions 9.0 - Revision 5 ;
I install the system and is up and running. I can login with user PS/PS .
Now I have to create a simple transaction because I have to monitor this system.
But a lot of the tabs are not working and I can only add Favorites.
What I can do to create a simple transaction. I need a very simple thing .

When I execute this step :
7. Load PeopleTools Messages and Data Project
7.1. Logon to Data Mover in bootstrap mode as the database owner using PT 8.52.12
7.2. Run <PS_HOME>\scripts\msgtlsupg.dms to load the updated messages into your database.
I receive this error what to do ??? :
Started: Tue Feb 12 14:28:04 2013
Data Mover Release: 8.52.12
Database: HR9 (ENG)
File: Data MoverSQL error. Stmt #: 0 Error Position: 12 Return: 942 - ORA-00942: table or view does not exist
Failed SQL stmt:DELETE FROM PSMSGSETDEFN WHERE MESSAGE_SET_NBR<1000
Error: SQL execute error for DELETE FROM PSMSGSETDEFN WHERE MESSAGE_SET_NBR<1000
Ended: Tue Feb 12 14:28:10 2013
Unsuccessful completion

[TEM] Allowing Basic Transaction maintenance of Relationship IT.

Similar Messages

Maybe you are looking for