TEM How to diffrentiate b/w internal and external events

Hi experts,
        How do i distinguish b/w internal and external events ? When i try to create an event always by default it shows as internal in the top right above planned and firmly booked radio buttons. How do i create an external event which is held outside the company ?
please help...
Thanks & regards,
Pavan

Hi Pavan,
If you create a business event with resources, it is automatically considered an "internal" event -as you cannot plan resources OUTSIDE of your company-.
If you create a business event w/o resources, than system gives you the option of internal/external selection.
Regards,
Dilek

Similar Messages

  • How do I set up internal and external views in DNS

    Setting up a test SNL10.6.8 server behind airport extreme.
    Standalone server to run public DNS, iCal, Contacts and Web
    I would like to include multiple views in etc/named.conf with statement match-clients{any;}; for public view and match-clients{127.0.0.1/32;10.0.0.0/8;}; for private view.  Server Admin won't let me do this.
    I have two questions.
    1.  Can I effectively secure this setup.
    2. How do I do it?   Do I comment out ' include "etc/dns/publicView.conf.Apple" ' in etc/named.conf and add my own two views or do I use Server Admin to mangae the public view and zones and manually manage the internal zone?
    Thank you for your help and advice. 

    Linux and the BSDs (among other choices) are the full-power, deep-end-of-the-pool roll-your-own solutions. They're excellent choices for a number of application and network services configurations, and for cases with complex or tailored requirements.  The target market is tweakable and easily customized.  Mac doesn't aim there.
    Having used and managed BIND on both Mac OS X Server and on other (non-Unix) servers, managing it on Mac OS X Server is simpler, though (as is often the case) you have to manage the server the way Apple expects you to.   The other servers I work with toss you into the BIND configuration files with a text editor, and while that's entirely feasible, it's not what I'd call user-friendly nor simple.  (See first paragraph.)
    Running DNS at public servers (such as your ISP) and running a second set of DNS servers on your LAN is easily within reach of the Server Admin tool, and it means you don't have to be delegated, etc., for the public views, and it means your ISP owns securing your external DNS.
    If you're accustomed to hand-managing and tweaking your DNS configurations, then Server Admin probably won't do all what you want, if you want to use any of the features of BIND9 past the subset that Server Admin allows you access to.  The question then becomes whether Server Admin does enough of what you need.
    Running iCal via VPN is typical and folks that are not on the VPN can use the web interfaces or related, if you're not offering an "open" iCal connection through your firewall.
    One other oddity you might want to consider.  Last I checked, BIND9 was also present in client.  Hand-managed.  That might give you a different option here.

  • Internal and External Events

    Hello,
    Inside of the Event Loop Structure is there a way of telling if the event was triggered by a Front Panel change or by the Value Signaling property. I'm thinking I could use the value tabs to the left of the structure (maybe source or type), but I do not know exactly how these values are used. I could not find documentation on these tabs.
    Thank You,
    Glen

    While there may be a way using the event structure I was unable in a short look to find it. I created a VI with a numeric control and a value change event that had indicators on the "source" and "type" connectors on the left side of the event frame. I created a sub-vi with a control ref input that was tied to a property node, val(sgnl). This was in a for loop set to execute a few times. This vi was set to run in the "other1" thread rather in the "same as caller" which would have been the UI thread. When I run this
    the "Source" indicator on the top level vi shows LabVIEW UI and the "Type" as Value Change the same as if the control is actuated in directly in the higher vi ...
    Sorry,
    Putnam Monroe
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Transaction to rate an internal and external instructor

    How to set rating for internal and external instructor and also write comments about the training

    in the business event appriasal
    You can create a criteria grp Faculty
    and you can add Criterias like
    -Ability to draw Participation
    -Communication Skills
    -Faculty's Knowledge

  • How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

    Dear Experts,
    I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.  
    The registered domain name is e.g.  contoso.com. 
    a. What should I use as domain name on AD? contoso.com or contoso.local
    b. Is it recommended to have two different servers  for AD and Exchange?
    c. What should be my connector settings for mail flow?
    d. how can I set 2 email servers in company for load balancing?

    Hi,
    a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
    b, Recommended that installing AD
    and Exchange Server on two separate
    Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
    c, Found some articles for your reference:
    Configure Mail Flow and Client Access
    http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
    Configuring Outbound Mail Flow in Exchange Server 2013
    http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
    d, Load Balancing
    http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • How to Setup RDS custom property when internal and external domain name space is different

    Hi All
    I am setting up RDS for customer
    My internal domain name is domain.local and my external domain is domain.com
    I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
    Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
    In above command, remote.domain.com points to which host?
    Is it pointing to RD Session Broker
    OR
    Pointing to RD Session Host servers
    I am not sure what above command will do exactly ?
    Any help will be highly appreciated
    Thanks Best Regards Mahesh

    Hi,
    It all depends who is accessing the RDS Solution.
    If you have a large BYOD or large number of external users, it would be better to use a public certificate.
    Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
    http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
    You can use a custom RDP property to hide the Session host names.
    Have a look at the following article on configuring certificates:
    http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
    Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

  • How tro create a Internal and External repository?

    Hi Gurus,
    I am new to KM can someone tell me what is the prerequsities for creating Internal and External Repository?
    and give me the steps for creating Internal and External repository?
    Thanks in Advance,
    Dharani

    Hi Dharani,
    Refer this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/69/d96b7da84611d5993600508b6b8b11/content.htm
    regards
    Parth

  • Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

    We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
    The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
    the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
    all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
    So it seems that the issue only arises when we are sending to both internal and external addresses.
    I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
    longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
    So, I have two concerns:
    First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
    Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
    For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

    Hi Neil,
    According to the description, I find a related KB on Exchange 2010:
    https://support.microsoft.com/kb/2694474?wa=wsignin1.0
    It has the similar situation as yours.
    This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
    Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
    Also please check whether Throttling has been set.
    Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
    More details to see:
    Message throttling 
    http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Can I split my itunes music library between and internal and external hard drive?

    Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod?  Here's my situation:  I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users.  I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

    If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive.  Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads.  You would need to manuay manage moving things from there if tht is not where you want them stored.
    Perhaps a "better" solution would be for you to invest a little mone into 2 external drives.  One to hold your entire iTunes library, and the second to be your off-line backup of the first.  This is the method I have gone with and I like how it works for me.  My entire iTunes library is on an external (portable) 320GB drive.  Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content.  For me, I purchase little content during a week, but I do move a fairly large volume of podcasts.  With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically.  This won't work for apps or purchased content, but for subscribed podcasts, it is great.

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

  • Setup internal and external DNS namespaces best practice

    Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local) able to run on the same DNS server (using Microsoft Windows DNS servers)?
    MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com if the external namespace is companydomain.com.  How shall this be setup?  Shall I create my ADDS domain as corp.companydomain.com directly
    or companydomain.com then create a subdomain corp?
    Thanks in advanced.
    William Lee
    Honf Kong

    Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local)
    able to run on the same DNS server (using Microsoft Windows DNS servers)?
    Yes, it is technically feasible. You can have both of them running on the same DNS server(s). Just only your public DNS zone can be published for external resolution.
    MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com
    if the external namespace is companydomain.com.  How shall this be setup?  Shall I create my ADDS domain as corp.companydomain.com directly or companydomain.com then create a subdomain corp?
    What is recommended is to avoid having a split-DNS setup (You internal and external DNS names are the same). This is because it introduces extra complexity and confusion when managing it.
    My own recommendation is to use .local for internal zone and .com for external one.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Internal and External different set of menu for ESS

    Hi
    We have 2 portal server - Internal and External. The Portal are being used not.
    We are planning to implement ESS now in Portal. We are planning to provide two different set of options when the same user access internally and externally.
    For example, User XYZ access internally he will get menus ABCDE but the same user access from external he only gets manu AB.
    If anyone has implemented with similar concepts or know how to do it technically, kindly advice.
    Thanks
    Yuva

    Let us assume we have 3 internal groups :
    internalGroup_1 -> Role A, Role B
    internalGroup_2 -> Role C, Role D,
    internalGroup_3 -> Role E,
    and 2 external group :
    externalGroup_1 -> Role A,
    externalGroup_2 -> Role B,
    We add similar user under a group. and then roles are assigned to groups. in above example Role A , Role B is assigned to internalGroup_1.
    We can have a single user id in which is attached to interalGroup_1, interalGroup_2, interalGroup_3 , externalGroup_1and interalGroup_2.
    When user logon to Internal portal he will see role A, B,C,D and E
    and when user logon to internal  poral he will see role A,B.
    provided A,B,C,D,E roles should exist in internal protal and role A,B exist in External portal. You can use transport roles from external portal to internal portal.

  • Internal and External Reconciliations

    I am looking to find out what the differences are with Internal and External Reconciliations.
    I am not sure if I need to use Internal or External when doing Manual Reconciliations in banking.
    Thanks!
    Dayna

    I am trying to figure out how to use the bank reconciliation process. I keep seeing reference to an "expert sesion" and a link to it.  However I get an Access Denied message when I try the link.
    Help. ? If this "expert session" is on the Partner Portal, how are we lowly Customer to get it?
    "External reconciliation is used for bank reconciliation , however when you go in detail , you have to use internal reconciliation for Business partner and Vendor .
    https://websmp206.sap-ag.de/~sapidb/011000358700000050892007E
    Review this expert session ,bank statement processing in CA...

  • Specification documents o internal and external programs documentation

    I have to make some changes in the specification documents o internal and external programs documentation. I want to know i there are defined some standard conventions about the technica objects name and the requirements documentation.
    We have made some formats, but we have seen change resistance=2 The problem is the amount of information required in these ne formats that we think is important and will help to reduc ambiguity and to avoid backworks but it's going to ad activities to the developers.

    . Ours is bit different to what she sampled but the standardization differ from the team implementing it. You must also come out with the pattern for program "pre" and "post" documentation.
    1. Before the actual coding of the program, you have to specify the estimated number of mandays needed for the analysis, coding and documentation. Don't forget to add n% for the buffer. (In our case, we use 30% buffer). Then update the form by putting on the other column the actual mandays consumed. There should not be cases that estimated < actual mandays. If problem is encountered that may cause delay, inform team lead to adjust the estimated mandays.
    2. Create a form that will specifically states the unit testing made (eg. Test case, test data, how the test is perform, outcome of testing, rating: pass or fail, etc.)
    3. After coding, specific program specification (eg. logic of the program, tables created, function module used, authorization checking, etc). Please be reminded to put result of "program extended syntax check" (tcode: slin) and "run time analysis" (tcode: se30) if applicable.
    4. And initial code review must made also. If proper ABAP coding is incorporated and obliged by the program. If the proper naming convention that you implemented is followed by the program...so on and so forth.
    hope you'll get some ideas out of it.
    cheers,

  • Internal and External application tier File move

    Hi all,
    I am new oracle apps R12 with 3 tier instance.
    We are created the oracle apps R12 instance with 3 tier. Two tier is Application tier and one tier is Database tier.
    The data base tier is common for both application tier. The issue is, we are moved the all customized Development works into only one application tier (i.e. Internal tier). So we are not moved the all customized Development work into second application tier (i.e. External tier).
    My question is, we are not moving all customized work into both application tier means , is there any issue will occur ?
    How can we handle my customized works both application tiers( i.e. Internal and external tiers) ?
    Please help,
    Thanks,
    Prab.

    Hi;
    They are questioning me why we have to do that.Answer is easy, You can mention for ebs stability all nodes should be on same level :) If they push you more please show metalink notes which is already sharing by Hussein Sawwan. If they still persist say them you will go wiht SR and confirm wiht support ;)
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

Maybe you are looking for