Temp Workaround for Bug CSCun19415 - SPA 504G Transfer stopped by incoming calls

We have found that if you turn the CW Setting (User, Supplementary Services, CW Setting) to "No", then this provides a workaround for this issue. Obviously, there is a loss of functionality of the Call Waiting feature on all lines since this is a macro setting for the phone. However, until a bug fix for this issue (it is NOT an enhancement) comes out this does provide a good workaround. This also provides a workaround for the discussion on this support forum labeled "SPA 504G Transfer stopped by incoming calls".
Bob Conner

At least in our case this is not a valid workaround, for we need our operator (only one person) to know how many calls are waiting.
I agree completely: it is a bug, and not an enhancement. The second incoming call interrupts and aborts the transfer process associated to the previous call. It is amazing that so many firmware upgrades has been released since this behaviour was detected, and it is still here unresolved.
My only workaround is using an old Linksys SPA942 (which works as expected) or another brand's model.
My need: A multi-line SIP terminal for an operator to distribute the calls. And, as bizarre as it may sound, this cannot be addressed with CISCO (at least with 50x series).
Paul

Similar Messages

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.

After updating to version 5 for iPhone 4, I am unable to hear incoming call from earpiece. Speaker phone ok.

Unable to hear incoming call in earpiece. Speaker phone ok.

ok thanks for someone "Wjolsten" pointing out that i might have put on the 'ringer silence' button on on the side of the phone. ......................... boy do i feel stupid. thanks all the same for the 'tech support' from Apple, Geniuses?? i dont think so.

Unable to transfer a second incoming call from my Cisco IP Phone 7940

1) A call comes into reception (call A).
2) The receptionist answers the call A / Client A.
3) While the receptionist is talking with the client (A), the screen displays the options 'Transfer' etc until then she can transfer the call.
4) Then comes a second call, the call 'B', and then 'transfer' softkey disappear displays options 'Answer' . At that time the receptionist can not transfer the call 'A' until she answers the call B.
She couldn't transfer calls until she answers all incoming calls

duplicate
https://supportforums.cisco.com/discussion/12255956/unable-transfer-second-incoming-call-my-cisco-ip-phone-7940

Is there any workaround for Bug 6644652 ?

Hi
This issue is documented in DBAppTables GTC Connector at Known issues:
"Bug 6644652
Reconciliation of account deletion is not supported. In other words, if a record is
deleted from the target database, then this deletion is not reconciled into Oracle
Identity Manager"
Is there any workaround that can be used ?
Thank You in advanced,
Ionut

EHLO!
Today I ALMOST finalized my delete-recon (is for AD objects, but I think it may work in many contexts). As the pals said, you have to use the createDeleteReconciliationEvent method from the operations API.
I had a big problem: I spent a day looking for a NullPointerException that was raised just when this method is called. I realized that there is not a problem itself, the exception was raised because I was launching from the Eclipse project! So, instead of develop all the stuff and then pass it to OIM, I had to maje the jar, put it into the ScheduleTask folder, and execute it with the Task Scheduler from the Design Console, or from the Admin Console.
For a brief:
1) make a class that extends com.thortech.xl.scheduler.tasks.SchedulerBaseTask
2) implement the execute() method
3) for creating the operator, you can call (tcReconciliationOperationsIntf)getUtility("Thor.API.Operations.tcReconciliationOperationsIntf") (getUility is inherited from SchedulerBaseTask)
4) Make some Map object, with key/value pairs. Keys have to be the same as they appear in the Reconciliation Fields of the Resource Object, and at least you have to put the required ones. Call the method, the first parameter is a String with the RO ("Xellerate User", "AD User", "Exchange", etc).
For example, you can make something like this:
               HashMap hm = new HashMap();
               hm.put("User ID", "drldap");
               hm.put("objectGUID", "12345679");
               try {
                    reconOps.createDeleteReconciliationEvent("AD User", hm);
               catch(Exception e) {
                    e.printStackTrace(System.out);
Hope it was helpful. Enjoy!
DrLDAP!

Workaround for bug (ACPI, Power supply)

Hi.
I'm using Arch on Samsung 530U and there is bug in handling with power supply. It is reported for example here: https://bugs.launchpad.net/bugs/971061, https://bugs.launchpad.net/bugs/1027798 etc.
Samsung's replies on my urgents to fix it are: "Use windows..."
In short - problem is that system remember if the battery is charging/discharging only at boot (I guess when acpi starts) and since than it is frozen. But the recognition of pluging/unpluging power supply works fine.
Here is what is does, when cable was plugged at start:
Battery is fully charged and adapter is connected:
~$ acpi -V
Battery 0: Unknown, 80%
Battery 0: design capacity 6100 mAh, last full capacity 6100 mAh = 100%
Adapter 0: on-line
~$ cat /sys/class/power_supply/BAT1/status
Unknown
~$ cat /sys/class/power_supply/ADP1/online
1
When the adapter is disconnected:
Battery 0: Charging, 80%, charging at zero rate - will never fully charge.
Battery 0: design capacity 6100 mAh, last full capacity 6100 mAh = 100%
Adapter 0: off-line
~$ cat /sys/class/power_supply/BAT1/status
Charging
~$ cat /sys/class/power_supply/ADP1/online
0
You can see that adapter is recognized well, but the battery still "thinks" it has been charging. I can't see how much time is remaining etc.
When I manually try 'sudo echo "Discharging" >> /sys/class/power_supply/BAT1/status' I get permission denied.
Any ideas or workaround?
Thanks
Last edited by Kotrfa (2013-04-16 08:38:10)

Hi.
I'm using Arch on Samsung 530U and there is bug in handling with power supply. It is reported for example here: https://bugs.launchpad.net/bugs/971061, https://bugs.launchpad.net/bugs/1027798 etc.
Samsung's replies on my urgents to fix it are: "Use windows..."
In short - problem is that system remember if the battery is charging/discharging only at boot (I guess when acpi starts) and since than it is frozen. But the recognition of pluging/unpluging power supply works fine.
Here is what is does, when cable was plugged at start:
Battery is fully charged and adapter is connected:
~$ acpi -V
Battery 0: Unknown, 80%
Battery 0: design capacity 6100 mAh, last full capacity 6100 mAh = 100%
Adapter 0: on-line
~$ cat /sys/class/power_supply/BAT1/status
Unknown
~$ cat /sys/class/power_supply/ADP1/online
1
When the adapter is disconnected:
Battery 0: Charging, 80%, charging at zero rate - will never fully charge.
Battery 0: design capacity 6100 mAh, last full capacity 6100 mAh = 100%
Adapter 0: off-line
~$ cat /sys/class/power_supply/BAT1/status
Charging
~$ cat /sys/class/power_supply/ADP1/online
0
You can see that adapter is recognized well, but the battery still "thinks" it has been charging. I can't see how much time is remaining etc.
When I manually try 'sudo echo "Discharging" >> /sys/class/power_supply/BAT1/status' I get permission denied.
Any ideas or workaround?
Thanks
Last edited by Kotrfa (2013-04-16 08:38:10)

Is there a workaround for bug 6648001 ?

In the evaluation part of the description of the bug a "suggested fix" is mentioned. But what is this fix? I currently have an Applet which tries to access a password protected resource. If I click cancel in the password dialog, leave the page and go back to it the applet and the whole browser hangs. The taskmanager is needed to close the browser. With 1.6u10 the problem is fixed. But not everyone has this version installed...

I guess, I'm of no help here.. I can crop and transform like crazy - no issues
I also tried your 'special' method, to crop/transform the main storyline (=what I wouldn't do) ... but the attached other clips appear without problems:
and after that 'arrangement', another one - no issues:
tsphillips wrote:
… Perhaps an interesting experiment would be to see what it takes to make a clip render outside of it's crop box.
here you lost me - in translation, sorry:
a clip OUTside its crop??
outside a crop is nothing, that's what a crop is for… shouldn't it?
cropping means; cutting-off parts of the pic, that icon is a passépartout..
so, outside a crop is … nothing to see here, Sir..
Sorry, of being no help here......
Would be interesting, what Cupertino will andswer you..........

Can't create blank signature as workaround for bug

Many other threads have discussed the bug where checking "place signature above quoted text" does not do so when no default signature is chosen. If one wants to have no signature as default, but have signatures placed above quoted text, the workaround is apparently to make a blank signature and use that as a default. Problem is, I can't make a blank signature. No matter what combination of whitespace I try to use as a signature (newlines, spaces, tabs), the signature reverts to the last non-whitespace input I had in the field. Anyone else have this problem?

Yes I had the same problem. However I have found another solution that at least works on my computer, even if I have those "workarounds". So maybe It might help you.
In Mail Pref in "Signatures"
- unchecked "Always match my default message font"
- Choose signature "None" selected
- checked "Place signature above quoted text"
In Mail Pref in "Composing"
- Message format "Rich Text" selected. THIS IS THE ESSENTIAL ON MY COMPUTER. Having Plain there the signature will always end up on the very bottom of the mail
- Responding UNCHECKED. THIS IS ALSO ESSENTIAL, BECAUSE REPLYING A PLAIN MAIL WILL MAKE THE REPLY PLAIN THEN AGAIN SENDING THE SIGNATURE TO ****...
In Mail Prefs in "Fonts and colors"
- I have Message font and Fixed-Width font both "Courier 12" because I want mails to look plain, even if they now are no longer plain...

Workaround for Bug ID 4532517:shouldYieldFocus does not allow side effects

The work-around for this bug is to set the InputVerifier for the component to null, show the dialog, then set the InputVerifier back to the component. However, the behaviour is still not consistent with the Java 1.3 behaviour. The act of clicking in the currently active JTextField, causes the shouldYieldFocus method to be called, even though focus is not being changed to another component. Is there anyway to avoid this behaviour with the work-around (a work-around for the work-around)? Thanks.

Thanky you for the fast reply!
I meant what the author "xxx..@x..." means with "See comment section.". Which comment section is he referencing to?
Greets Alexander

Applied Workaround for BUG:5871305, unable to deploy ear file

Hi,
I have upgraded Oracle 10g AS from 10.1.3.1 to 10.1.3.3.I am using admin_client.jar to deploy the ear file. After deployment, application gave error during start. The errors were related to apache.commons.logging. I applied the workaround provided on metalink note: 460448.1. I applied the changes in orion-application.xml file:
<imported-shared-libraries>
          <remove-inherited name="apache.commons.logging" />
     </imported-shared-libraries>
Now, upon deploying the ear file with the changes, its giving error during deployment:
oracle.oc4j.admin.deploy.api.J2EEDeploymentException: Operation failed with error:
Error parsing orion-application.xml at /u00/app/ora10gas/product/10.1.3.1/OracleAS_1/j2ee/main/application-deployments/coverzones: Fatal error at line 90 offset 25 in file:/u00/app/ora10gas/product/10.1.3.1/OracleAS_1/j2ee/main/applications/coverzones/: .<Line 90, Column 25>: XML-20201: (Fatal Error) Expected name instead of =.
I have searched a lot on metalink and on google about this error and have not got any pointers to look for root cause.
Oracle App Server Gurus, kindly help on this
regards
Raj

HI Jaap,
I checked the orion-application.xml file and I didn't found any typo error or syntax error in the specific xml tag for <imported-shared-libraries>. Below is the xml tag snippet:
<library path="ivjejb35.jar" /> 
          <library path="wsdl4j.jar" />
          <library path="CoverZones_DataBeans.jar"/>
          <library path="CoverZones_Session_EJBClient.jar"/>
          <library path="CoverZones_Request_Processors.jar" />
     <imported-shared-libraries>
          <remove-inherited name="apache.commons.logging" />
     </imported-shared-libraries>
<principals path="principals.xml" />
The same ear file without the above changes has worked in another Ora10gAS 10.1.3.3 cluster setup and the application works successfully.
regards
Raj

Any other workarounds for bug 4776648?

My telnet application will not navigate whatever I try. I have searched metalink and it seems I have run into bug 4776648 or metalink note 352156.1
Unfortunately, the solution posted there is not working for me. Who can help me fix it?
I have the latest Jdeveloper (10.1.3.2.0) with Mobile ADF version 10.1.3.4.0.66
(and also JHeadstart but that shouldn't be a problem) Should I try to downgrade?
Your help is appreciated!
Wendy
[update]
I downgraded from 10.1.3.2. to 10.1.3.1 where it seems the bug doesn't even exist. To get it to work I created a new application in 10.1.3.1 (BC and JSF) and copied the jars from WEB-INF/lib to the application created in 10.1.3.2
Opening and running it in 10.1.3.1 was not a problem after that.
Message was edited by:
Wendy Tromp

I know that SCORM 1.2 has a limit of 4000 characters in suspend_data and with a long course with many interactions this can quickly be filled up by Captivate. I don't know if AICC publishing has similar restrictions, but an overfilled suspend_data could explain many of your troubles.
Now.. I have a fix that will "flush" the suspend_data in a Captivate 3 course published with the SCORM protocol. I don't know if it will work for AICC, but you could give it a shot. Please note that this will also delete any resume data that Captivate stores, but since you selected not to send that anyways it shouldn't be an issue for you.
Insert this JavaScript as the “Project End Options” found under Project Settings – Start and End:
var data = g_objAPI.GetValue(”cmi.suspend_data”);data = “A” + data.substring(1);g_objAPI.SetValue(”cmi.suspend_data”,data);
You can read some more details about the above "hack" here: http://www.cpguru.com/2008/11/25/reset-bookmark-in-captivate-3/
Good luck ;o)
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

JDev team: is there a workaround for bug1482140?

I would like to know if anybody has figured out a workaround for bug 1482140 which is listed in the JDeveloper 3.2.2 readme. It states that it is not possible to deploy EJBs to 8.1.7 running on Solaris. It also indicates that it should have been fixed in 8.1.7.1 but the list of fixed bugs in 8.1.7.1 does not include this one. When is this going to be fixed? Why is there no status on it in Metalink? Is there something clever I can do similar to the workaround given for deploying BC4J?
Thanks for any help,
Matt

Uh, dude? What are you talking about? I've seen the workaround for the aurora_client.jar bit but I thought it only applied to BC4J as it says in the HOWTO under the JDEV docs. As for the 8.1.7.1b patch, this is the first I've heard of it. It doesn't help that searching for this bug under Metalink doesn't produce any results. The way I see it is that I should be able to enter the Bug number in Metalink, and it tells me what patchset the bug is fixed in. That mechanism seems to have broken down here. oh well, I have no problem with having to be told something twice, I'm not perfect. At least I have the stones to post messages with my name and email address Mr d. cheers.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by d:
Matt's been told about both of those options previously and he does not understand !!<HR></BLOCKQUOTE>
null

Possible workaround for CSCed41207

Hi,
Maybe not a real solution, but could be used as a workaround for bug CSCed41207 (CallManager needs support for MGCP fractional PRI).
You can set the B channels which are unavailable (because it's a fractional PRI) to maintenance mode with the following service parameter.
"Cisco Callmanager" service. Select advanced. Under "Clusterwide Parameters (Device - PRI and MGCP Gateway)" use the "Change B-Channel Maintenance Status #" parameter to disable the unavailable channels.
Example, if you have a E1 with 15 channels available, set the parameter to:
S1/[email protected] = 0000 0000 0000 0000 1111 1111 1111 1111
A 1 disables the channel. Always enable channel 16 because this is the D channel (for a E1).
You can use this for up to 5 gateway's. I've used this solution for fractional PRI with MGCP numerous times and it works!

Hi Dirk
Thanks for sharing the workaround solution for "CSCed41207".
We are working on new capabilities, where you can see relevant bug related discussions in the bug details page itself.
Discussion posts like yours, will show in the bug details page of "CSCed41207" and other Cisco Bug Toolkit users can benefit from this knowledge.
Please continue to share such experiences in the future.
Thanks
Arun

Manipulate destination numnber for incoming calls in CCM

dial-out digit translation can be done with translational patterns in CCM config.
Similarly how do we translate INCOMING digit strings ?
For example, suppose we want to change all incoming calls destined to 234XXX to 567XXX.

Use translation patterns.
For example if the inbound DID number is 234111 and you would like it to ring extension 567222:
Configure a translation pattern of
234111.
(notice the dot at the end!)
then configure discard digits to predot which drops the entire string of 234111
then configure prefix digits of 567222
So basically 234111 matches the translation pattern and discards all digits but appends 567222 causing the call to ring 567222.
Same thing can be done for ranges. For example:
234.XXX would match incoming DID range 234000-234999 and I could prefix it with a 567 causing the translations to ring 567000-567999 (drop the 234 and prefix the 567).
Please rate all posts!

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

Temp Workaround for Bug CSCun19415 - SPA 504G Transfer stopped by incoming calls

Similar Messages

Maybe you are looking for