Temperature increase in nvidia tab w/ driver change

I have a MSI FX5900SP VTD128. I installed the msi drivers that came w/ the card. The information on temperature on the nvidia tab in display advanced properties was about normal 40-41 idle in windows and 56 on load. The thing is I changed the msi driver to a nvidia latest driver 53.03, but when looking at the same temperature tab it reads now 56 when idle. I dont know which information is correct or what is the problem, Iwould appreciate if someone can help!
Thanks!

I have the same card. I used 53.03 at once so I do not know if there is a differens in temp but I did get 60 at idle and 85 under load. So i put on a Zalman ZM80C-HP which removed about 20 degrees which made me happy.
However that is an interesting issue. Perhaps if I get some time I will try the MSI driver to see if it shows a different temperature.
But surley there must be someone who has already done it?
/Nerd

Similar Messages

Random restarts after hard drive change!!

Hi guys, I have a Late 2009 15" MacBook Pro (Unibody) A1286 that recently had a hard drive change due to the stock one coming close to failure. After a couple hours of usage, It suddenly freezes (and if i'm playing audio, it sounds like a broken record for a second) and restarts and gets the "Your computer restarted because of a problem" message. When the desktop loads, It requests to send a report to apple and provides this message:
Anonymous UUID: 9CA89A41-B525-1850-2916-3E5637C22C3B
Fri Nov 28 18:27:04 2014
panic(cpu 0 caller 0xffffff8006edc43e): Kernel trap at 0xffffff80071c8881, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x00000000a2039000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x00000000091f0000, RDX: 0xffffff8020d7a810
RSP: 0xffffff80c227bf50, RBP: 0xffffff80c227bf70, RSI: 0x0000000000000050, RDI: 0xffffff8020d7a810
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80c227be70, R11: 0xffffff80152a6080
R12: 0x0000000000000001, R13: 0xffffff80210257f8, R14: 0x0000000000000000, R15: 0xffffff8021025840
RFL: 0x0000000000010286, RIP: 0xffffff80071c8881, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80c227bbe0 : 0xffffff8006e22f79
0xffffff80c227bc60 : 0xffffff8006edc43e
0xffffff80c227be30 : 0xffffff8006ef3976
0xffffff80c227be50 : 0xffffff80071c8881
0xffffff80c227bf70 : 0xffffff80071c6df8
0xffffff80c227bfb0 : 0xffffff8006ed7607
BSD process name corresponding to current thread: java
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000006c00000
Kernel text base: 0xffffff8006e00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 25628519916839
last loaded kext at 322876459037: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 65536)
last unloaded kext at 512411113713: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.34
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000LPVX-22V0TT0, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:
It was a brand-new hard drive, so there shouldn't be any issues!!! Any help or ideas ? The person I got the HD from suggested it's another issue such as the power adapter or motherboard, but It started after the swap.

Back up all data, then remove the Norton/Symantec product by following the instructions on either of these pages:
Uninstalling your Norton product for Mac
Removing Symantec programs for Macintosh
If you have a different version of the product, the procedure may be different.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

After updating to Firefox5.1, Nvidia kernal mode driver frequently "not responding & crashed then recovered", along with crashing of the Firefox browser.

After updating to Firefox5.1, Nvidia kernal mode driver frequently "not responding & crashed then recovered", along with crashing of the Firefox browser.

I have the same problem. I just upgraded to Win 7, no problems. Then I upgraded to FF 4.0, and I kept getting Nvidia Video Card crashes. I always undo my last computer change/install when something like this happens, so I immediately uninstalled 4.0, and went back to my older version of Firefox. No problems ever since.

How can I prevent the active Tab Group from changing whenever I close a tab?

Simply, often I will close a tab in Firefox 4; then, for some reason the active Tab Group changes to some other collection. It usually happens when I close the last tab in my tabs bar, but it has happened after closing other tabs, as well. Would love to prevent Tab Groups from changing automatically. Thank you!

Hi:
I tried precisely your suggestion before posting my message to the forum yesterday. I just forgot to mention it... Maybe I was afraid of increasing my message length more and more...
I already know that this solution prevents the MediaTracker from blocking. However...
(1) If they reach a troublesome image (like a Targa), the users of my application might not be pleased by its freezing for 10 seconds. Actually, this image loading module is part of an architecture for database applications from which my development team and I produce applications for various customers. Images are used, in particular, in Oracle BLOB support.
(2) If I use a smaller timeout delay, I have no guarantee that any image, whatever its length, will load properly (Targa excluded, of course). According to tests I performed yesterday, I am virtually sure that the 10-second delay will be busted very easily by pictures larger than 1 Mb. I cannot overlook this potential problem: an Oracle BLOB can contain up to 2 terabytes of data!
On the other side, I don't want to focus too much the attention on the JIMI Targa import filter because I know that a revised version of the JIMI and JAI packages will be part of JDK 1.4. This is why I am trying to figure out what is happening in the MediaTracker and Toolkit classes, which are much more fundamental than the Jimi ones...
Thanks anyway...
Best regards,
Jean-Fran�ois Morin

NVIDIA Quatro K2000M Driver Installation

Whenever I tried to install an NVIDIA driver from the regular arch repos it would not work and fall back to the vesa drivers. So I decided to download the driver from the NVIDIA site and install it. Whenever I try to install it however I will get the message:
The header file '/usr/src/linux-3.11.1-1-ARCH/include/linux/kernel.h' does not exist. The most likely reason for this is that the kernel source path '/usr/src/linux-3.11.1-1-ARCH' is incorrect.
Please make sure that you have installed the kernel source files for your kernel and that they are properly configured.
Now what I'm wondering is if the installer is wrong and if it isn't how/where do I get these source files?
Last edited by musdem (2013-09-17 22:38:25)

https://wiki.archlinux.org/index.php/FA … ge_is_X.3F
$ pkgfile /usr/src/linux-3.11.1-1-ARCH/include/linux/kernel.h
core/linux-headers
Do you have linux-headers installed?
Which package did you install from the repos - 'nvidia'?
I'm not sure if installing from nvidia's website will change anything, since this is what the package from the repo does: https://projects.archlinux.org/svntogit … ges/nvidia
source+=("ftp://download.nvidia.com/XFree86/Linux-${_arch}/${pkgver}/${_pkg}.run")
If grabs the package from nvidia's ftp and installs it. It should be the same .run file you can download manually from nvidia's website.
Last edited by karol (2013-09-17 22:54:41)

(SOLVED) nvidia GT 650M driver 331.38 problem with bumblebee

Hello people. Since i updated my system to nvidia 338.38-3 via pacman the bumblebee service stopped working and now i have the following error when i started something with primusrun or optirun:
[ 2070.640091] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card
[ 2070.640141] [ERROR]Aborting because fallback start is disabled.
My bumblebee.conf it's like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
My xorg.conf.nvidia it's like this:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "falsa"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
If someone could enlighten me i would apreciate it..Thanks in advance
Last edited by CyberNhull (2014-03-12 10:50:32)

skualito wrote:
Try booting with this kernel parameter:
rcutree.rcu_idle_gp_delay=1
Thanks for the reply, i tried that and the error changed to:
[ 297.499172] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
I will post my log since it appears the graphics now is at least detected but not inicialized:
sudo cat /var/log/Xorg.8.log
[ 294.111]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 294.111] X Protocol Version 11, Revision 0
[ 294.111] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 294.111] Current Operating System: Linux Nhull-Greyk 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 294.111] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw rcutree.rcu_idle_gp_delay=1
[ 294.111] Build Date: 09 January 2014 08:47:24AM
[ 294.111]
[ 294.111] Current version of pixman: 0.32.4
[ 294.111] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 294.111] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 294.111] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Mar 11 10:51:03 2014
[ 294.111] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 294.111] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 294.111] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 294.111] (==) ServerLayout "Layout0"
[ 294.111] (==) No screen section available. Using defaults.
[ 294.111] (**) |-->Screen "Default Screen Section" (0)
[ 294.111] (**) | |-->Monitor "<default monitor>"
[ 294.111] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 294.111] (**) | |-->Device "DiscreteNvidia"
[ 294.111] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 294.111] (**) Option "AutoAddDevices" "false"
[ 294.111] (**) Option "AutoAddGPU" "false"
[ 294.111] (**) Not automatically adding devices
[ 294.111] (==) Automatically enabling devices
[ 294.111] (**) Not automatically adding GPU devices
[ 294.111] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 294.111] Entry deleted from font path.
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 294.111] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 294.112] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 294.112] (==) |-->Input Device "<default pointer>"
[ 294.112] (==) |-->Input Device "<default keyboard>"
[ 294.112] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 294.112] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 294.112] (II) Loader magic: 0x804c80
[ 294.112] (II) Module ABI versions:
[ 294.112] X.Org ANSI C Emulation: 0.4
[ 294.112] X.Org Video Driver: 15.0
[ 294.112] X.Org XInput driver : 20.0
[ 294.112] X.Org Server Extension : 8.0
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 294.112] setversion 1.4 failed: Permission denied
[ 294.113] (--) PCI:*(0:1:0:0) 10de:0fd1:144d:c0d1 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 294.113] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 294.113] Initializing built-in extension Generic Event Extension
[ 294.113] Initializing built-in extension SHAPE
[ 294.113] Initializing built-in extension MIT-SHM
[ 294.113] Initializing built-in extension XInputExtension
[ 294.113] Initializing built-in extension XTEST
[ 294.113] Initializing built-in extension BIG-REQUESTS
[ 294.113] Initializing built-in extension SYNC
[ 294.113] Initializing built-in extension XKEYBOARD
[ 294.113] Initializing built-in extension XC-MISC
[ 294.114] Initializing built-in extension SECURITY
[ 294.114] Initializing built-in extension XINERAMA
[ 294.114] Initializing built-in extension XFIXES
[ 294.114] Initializing built-in extension RENDER
[ 294.114] Initializing built-in extension RANDR
[ 294.114] Initializing built-in extension COMPOSITE
[ 294.114] Initializing built-in extension DAMAGE
[ 294.114] Initializing built-in extension MIT-SCREEN-SAVER
[ 294.114] Initializing built-in extension DOUBLE-BUFFER
[ 294.114] Initializing built-in extension RECORD
[ 294.114] Initializing built-in extension DPMS
[ 294.114] Initializing built-in extension Present
[ 294.114] Initializing built-in extension DRI3
[ 294.114] Initializing built-in extension X-Resource
[ 294.114] Initializing built-in extension XVideo
[ 294.114] Initializing built-in extension XVideo-MotionCompensation
[ 294.114] Initializing built-in extension XFree86-VidModeExtension
[ 294.114] Initializing built-in extension XFree86-DGA
[ 294.114] Initializing built-in extension XFree86-DRI
[ 294.114] Initializing built-in extension DRI2
[ 294.114] (II) "glx" will be loaded by default.
[ 294.114] (II) LoadModule: "dri2"
[ 294.114] (II) Module "dri2" already built-in
[ 294.114] (II) LoadModule: "glamoregl"
[ 294.114] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 294.135] (II) Module glamoregl: vendor="X.Org Foundation"
[ 294.135] compiled for 1.15.0, module version = 0.6.0
[ 294.135] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.135] (II) LoadModule: "glx"
[ 294.135] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 294.196] (II) Module glx: vendor="NVIDIA Corporation"
[ 294.197] compiled for 4.0.2, module version = 1.0.0
[ 294.197] Module class: X.Org Server Extension
[ 294.197] (II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
[ 294.197] Loading extension GLX
[ 294.197] (II) LoadModule: "nvidia"
[ 294.197] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 294.200] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 294.200] compiled for 4.0.2, module version = 1.0.0
[ 294.200] Module class: X.Org Video Driver
[ 294.200] (II) LoadModule: "mouse"
[ 294.200] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 294.201] (II) Module mouse: vendor="X.Org Foundation"
[ 294.201] compiled for 1.15.0, module version = 1.9.0
[ 294.201] Module class: X.Org XInput Driver
[ 294.201] ABI class: X.Org XInput driver, version 20.0
[ 294.201] (II) LoadModule: "kbd"
[ 294.201] (WW) Warning, couldn't open module kbd
[ 294.201] (II) UnloadModule: "kbd"
[ 294.201] (II) Unloading kbd
[ 294.202] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 294.202] (II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
[ 294.202] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 294.202] (--) using VT number 7
[ 294.202] (II) Loading sub module "fb"
[ 294.202] (II) LoadModule: "fb"
[ 294.202] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 294.203] (II) Module fb: vendor="X.Org Foundation"
[ 294.203] compiled for 1.15.0, module version = 1.0.0
[ 294.203] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.203] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 294.203] (II) Loading sub module "wfb"
[ 294.203] (II) LoadModule: "wfb"
[ 294.203] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 294.204] (II) Module wfb: vendor="X.Org Foundation"
[ 294.204] compiled for 1.15.0, module version = 1.0.0
[ 294.204] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.204] (II) Loading sub module "ramdac"
[ 294.204] (II) LoadModule: "ramdac"
[ 294.204] (II) Module "ramdac" already built-in
[ 294.204] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 294.204] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 294.204] (==) NVIDIA(0): RGB weight 888
[ 294.204] (==) NVIDIA(0): Default visual is TrueColor
[ 294.204] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 294.204] (**) NVIDIA(0): Option "NoLogo" "true"
[ 294.204] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 294.204] (**) NVIDIA(0): Option "UseEDID" "false"
[ 294.204] (**) NVIDIA(0): Option "UseDisplayDevice" "Screen1"
[ 294.204] (**) NVIDIA(0): Enabling 2D acceleration
[ 294.204] (**) NVIDIA(0): Ignoring EDIDs
[ 297.471] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 297.472] (II) NVIDIA(0): NVIDIA GPU GeForce GT 650M (GK107) at PCI:1:0:0 (GPU-0)
[ 297.472] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 297.472] (--) NVIDIA(0): VideoBIOS: 80.07.6a.00.0a
[ 297.472] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 297.475] (--) NVIDIA(0): Valid display device(s) on GeForce GT 650M at PCI:1:0:0
[ 297.475] (--) NVIDIA(0): CRT-0
[ 297.475] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 297.475] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
[ 297.475] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
[ 297.475] (EE) NVIDIA(0): to start anyway
[ 297.493] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 297.493] (II) UnloadModule: "nvidia"
[ 297.493] (II) UnloadSubModule: "wfb"
[ 297.493] (II) UnloadSubModule: "fb"
[ 297.493] (EE) Screen(s) found, but none have a usable configuration.
[ 297.493] (EE)
Fatal server error:
[ 297.493] (EE) no screens found(EE)
[ 297.493] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 297.493] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 297.493] (EE)
[ 297.493] (EE) Server terminated with error (1). Closing log file.
Last edited by CyberNhull (2014-03-11 10:59:41)

Xorg 1.8 - nvidia 96xx legacy driver

Since a few weeks I use Archlinux and I'was happy with it until my last upgrade. After this (incl. kernel 2.6.34 and xorg 1.8) I was lost in the dark. Googling learned me that the nvidia 96xx legacy driver (I have an old Geforce card) cannot cope with xorg 1.8 (yet??). Could this be better coordinated in the future?
If not, can someone please explain (in simple terms, I'm a newbie, what to do if such things happen).
Thanks in advance.

Lets see (long post)
uname -a
Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
[ 11.364]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.364]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 11.364] X Protocol Version 11, Revision 0
[ 11.364] Build Operating System: Linux 2.6.34-ARCH i686
[ 11.364] Current Operating System: Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
[ 11.364] Kernel command line: root=/dev/sda1 ro fastboot quiet 4
[ 11.364] Build Date: 21 June 2010 11:54:27AM
[ 11.364]
[ 11.378] Current version of pixman: 0.18.2
[ 11.378] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.378] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 02:17:21 2010
[ 11.401] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.401] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.450] (==) ServerLayout "Layout0"
[ 11.450] (**) |-->Screen "Screen0" (0)
[ 11.450] (**) | |-->Monitor "Monitor0"
[ 11.450] (**) | |-->Device "Device0"
[ 11.450] (**) |-->Input Device "Keyboard0"
[ 11.450] (**) |-->Input Device "Mouse0"
[ 11.450] (==) Automatically adding devices
[ 11.450] (==) Automatically enabling devices
[ 11.503] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.503] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.521] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11.521] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.521] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.521] (WW) Disabling Keyboard0
[ 11.521] (WW) Disabling Mouse0
[ 11.521] (II) Loader magic: 0x81e9d00
[ 11.521] (II) Module ABI versions:
[ 11.521] X.Org ANSI C Emulation: 0.4
[ 11.521] X.Org Video Driver: 7.0
[ 11.521] X.Org XInput driver : 9.0
[ 11.521] X.Org Server Extension : 3.0
[ 11.531] (--) PCI:*(0:1:0:0) 10de:0181:1462:9350 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 164, Mem @ 0xfb000000/16777216, 0xf4000000/67108864, BIOS @ 0x????????/131072
[ 11.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.531] (II) LoadModule: "extmod"
[ 11.580] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.589] (II) Module extmod: vendor="X.Org Foundation"
[ 11.589] compiled for 1.8.1.902, module version = 1.0.0
[ 11.589] Module class: X.Org Server Extension
[ 11.589] ABI class: X.Org Server Extension, version 3.0
[ 11.589] (II) Loading extension MIT-SCREEN-SAVER
[ 11.589] (II) Loading extension XFree86-VidModeExtension
[ 11.589] (II) Loading extension XFree86-DGA
[ 11.591] (II) Loading extension DPMS
[ 11.591] (II) Loading extension XVideo
[ 11.591] (II) Loading extension XVideo-MotionCompensation
[ 11.591] (II) Loading extension X-Resource
[ 11.591] (II) LoadModule: "dbe"
[ 11.608] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.618] (II) Module dbe: vendor="X.Org Foundation"
[ 11.618] compiled for 1.8.1.902, module version = 1.0.0
[ 11.618] Module class: X.Org Server Extension
[ 11.618] ABI class: X.Org Server Extension, version 3.0
[ 11.618] (II) Loading extension DOUBLE-BUFFER
[ 11.619] (II) LoadModule: "glx"
[ 11.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.050] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.050] compiled for 4.0.2, module version = 1.0.0
[ 12.050] Module class: X.Org Server Extension
[ 12.050] (II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
[ 12.050] (II) Loading extension GLX
[ 12.050] (II) LoadModule: "record"
[ 12.051] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.061] (II) Module record: vendor="X.Org Foundation"
[ 12.061] compiled for 1.8.1.902, module version = 1.13.0
[ 12.061] Module class: X.Org Server Extension
[ 12.061] ABI class: X.Org Server Extension, version 3.0
[ 12.061] (II) Loading extension RECORD
[ 12.061] (II) LoadModule: "dri"
[ 12.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.074] (II) Module dri: vendor="X.Org Foundation"
[ 12.074] compiled for 1.8.1.902, module version = 1.0.0
[ 12.074] ABI class: X.Org Server Extension, version 3.0
[ 12.074] (II) Loading extension XFree86-DRI
[ 12.074] (II) LoadModule: "dri2"
[ 12.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.075] (II) Module dri2: vendor="X.Org Foundation"
[ 12.075] compiled for 1.8.1.902, module version = 1.2.0
[ 12.075] ABI class: X.Org Server Extension, version 3.0
[ 12.075] (II) Loading extension DRI2
[ 12.075] (II) LoadModule: "nvidia"
[ 12.084] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.137] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.137] compiled for 4.0.2, module version = 1.0.0
[ 12.137] Module class: X.Org Video Driver
[ 12.137] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 9.0, need < 8.0). The driver will continue to load, but may behave strangely.
[ 12.175] (II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
[ 12.176] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.176] (--) using VT number 4
[ 12.178] (II) Primary Device is: PCI 01@00:00:0
[ 12.178] (II) Loading sub module "fb"
[ 12.178] (II) LoadModule: "fb"
[ 12.178] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.189] (II) Module fb: vendor="X.Org Foundation"
[ 12.189] compiled for 1.8.1.902, module version = 1.0.0
[ 12.189] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.190] (II) Loading sub module "ramdac"
[ 12.190] (II) LoadModule: "ramdac"
[ 12.190] (II) Module "ramdac" already built-in
[ 12.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.211] (==) NVIDIA(0): RGB weight 888
[ 12.211] (==) NVIDIA(0): Default visual is TrueColor
[ 12.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.211] (**) NVIDIA(0): Option "DPI" "96x96"
[ 12.214] (**) NVIDIA(0): Enabling RENDER acceleration
[ 12.214] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 12.214] (II) NVIDIA(0): enabled.
[ 12.706] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
[ 12.706] (--) NVIDIA(0): Memory: 65536 kBytes
[ 12.706] (--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
[ 12.706] (II) NVIDIA(0): Detected AGP rate: 8X
[ 12.706] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 12.706] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
[ 12.706] (--) NVIDIA(0): PCI:1:0:0:
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0)
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0): 350.0 MHz maximum pixel clock
[ 12.707] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 12.707] (II) NVIDIA(0): Validated modes:
[ 12.707] (II) NVIDIA(0): "856x481"
[ 12.707] (II) NVIDIA(0): Virtual screen size determined to be 856 x 481
[ 12.707] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 12.707] (--) Depth 24 pixmap format is 32 bpp
[ 12.709] (II) NVIDIA(0): Initialized GART.
[ 12.720] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 12.728] (II) NVIDIA(0): Setting mode "856x481"
[ 12.813] (II) Loading extension NV-GLX
[ 12.824] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 12.840] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 12.850] (==) NVIDIA(0): Backing store disabled
[ 12.850] (==) NVIDIA(0): Silken mouse enabled
[ 12.852] (**) NVIDIA(0): DPMS enabled
[ 12.852] (II) Loading extension NV-CONTROL
[ 12.852] (==) RandR enabled
[ 12.852] (II) Initializing built-in extension Generic Event Extension
[ 12.852] (II) Initializing built-in extension SHAPE
[ 12.852] (II) Initializing built-in extension MIT-SHM
[ 12.852] (II) Initializing built-in extension XInputExtension
[ 12.852] (II) Initializing built-in extension XTEST
[ 12.852] (II) Initializing built-in extension BIG-REQUESTS
[ 12.852] (II) Initializing built-in extension SYNC
[ 12.852] (II) Initializing built-in extension XKEYBOARD
[ 12.852] (II) Initializing built-in extension XC-MISC
[ 12.852] (II) Initializing built-in extension SECURITY
[ 12.852] (II) Initializing built-in extension XINERAMA
[ 12.852] (II) Initializing built-in extension XFIXES
[ 12.852] (II) Initializing built-in extension RENDER
[ 12.852] (II) Initializing built-in extension RANDR
[ 12.852] (II) Initializing built-in extension COMPOSITE
[ 12.852] (II) Initializing built-in extension DAMAGE
[ 12.856] (II) Initializing extension GLX
[ 13.318] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 13.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.318] (II) LoadModule: "evdev"
[ 13.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.326] (II) Module evdev: vendor="X.Org Foundation"
[ 13.326] compiled for 1.8.0, module version = 2.4.0
[ 13.326] Module class: X.Org XInput Driver
[ 13.326] ABI class: X.Org XInput driver, version 9.0
[ 13.326] (**) Power Button: always reports core events
[ 13.326] (**) Power Button: Device: "/dev/input/event4"
[ 13.333] (II) Power Button: Found keys
[ 13.333] (II) Power Button: Configuring as keyboard
[ 13.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.333] (**) Option "xkb_rules" "evdev"
[ 13.333] (**) Option "xkb_model" "evdev"
[ 13.333] (**) Option "xkb_layout" "us"
[ 13.377] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.377] (**) Power Button: always reports core events
[ 13.377] (**) Power Button: Device: "/dev/input/event2"
[ 13.387] (II) Power Button: Found keys
[ 13.387] (II) Power Button: Configuring as keyboard
[ 13.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.387] (**) Option "xkb_rules" "evdev"
[ 13.387] (**) Option "xkb_model" "evdev"
[ 13.387] (**) Option "xkb_layout" "us"
[ 13.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 13.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.387] (**) Sleep Button: always reports core events
[ 13.387] (**) Sleep Button: Device: "/dev/input/event3"
[ 13.397] (II) Sleep Button: Found keys
[ 13.397] (II) Sleep Button: Configuring as keyboard
[ 13.397] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 13.397] (**) Option "xkb_rules" "evdev"
[ 13.397] (**) Option "xkb_model" "evdev"
[ 13.397] (**) Option "xkb_layout" "us"
[ 13.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.401] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.410] (II) AT Translated Set 2 keyboard: Found keys
[ 13.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 13.410] (**) Option "xkb_rules" "evdev"
[ 13.410] (**) Option "xkb_model" "evdev"
[ 13.410] (**) Option "xkb_layout" "us"
[ 13.411] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.423] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 13.424] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 13.424] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[ 13.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[tigtex@mediacenter ~]$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
7096 frames in 5.0 seconds = 1419.008 FPS
7110 frames in 5.0 seconds = 1421.859 FPS
7111 frames in 5.0 seconds = 1422.168 FPS
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
[tigtex@mediacenter ~]$ lsmod | grep nvidia
nvidia 4657813 22
i2c_core 15144 2 i2c_viapro,nvidia
agpgart 23120 2 nvidia,via_agp
[root@mediacenter tigtex]# pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
there is nothing to do
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "856x481"
EndSubSection
EndSection
pacman -Qs nvidia
local/libvdpau 0.4-1
Nvidia VDPAU library
local/nvidia-96xx 96.43.16-3
NVIDIA drivers for kernel26, 96xx branch.
local/nvidia-96xx-utils 96.43.16-1
NVIDIA drivers utilities and libraries, 96xx branch.
Good luck with the mistery.
I didn't use anything else to install nvidia-96xx, it was with pacman. nvidia-96xx is no longer on repos but it was when i made the setup. I dont see why they removed it. Works 100% good here on my SD plasma. Even with games and xbmc.
Last edited by TigTex (2010-06-28 01:36:03)

External Hard Drives Changing Permissions to Read Only

Three of my USB external hard drives have suddenly changed to read only. One of the times I was trying to transfer/back-up the files from one drive that had changed to read only to another external. Suddenly the second drive changed permissions. Then after plugging a third external, that drive changed permissions. They all were working perfectly fine with my computer and I have only been using them on MACS. Any explanations? Could there be something wrong with my USB ports? Is it possible to have a virus of some sort?
Thank you!

In disk utility I had a look. I cannot verify or set permission (greyed out). The data coming back from info. How can I change this??
Name : FUJITSU MHZ2320BH G1 Media
Type : Disk
Partition Map Scheme : Master Boot Record
Disk Identifier : disk2
Media Name : FUJITSU MHZ2320BH G1 Media
Media Type : Generic
Connection Bus : USB
USB Serial Number : 560A48A291F9
Device Tree : /PCI0/EHC1@1D,7/@3:0
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 298,1 GB (320.072.933.376 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 2
Partition Number : 0
Name : NieuwVolume
Type : Volume
Disk Identifier : disk2s1
Mount Point : /Volumes/NieuwVolume
File System : Windows NT File System (NTFS)
Connection Bus : USB
Device Tree : /PCI0/EHC1@1D,7/@3:1
Writable : No
Universal Unique Identifier : C7B58C48-D6BC-4078-9DAE-CB125901A4D6
Capacity : 298,1 GB (320.070.288.384 Bytes)
Free Space : 127,1 GB (136.438.530.048 Bytes)
Used : 171,0 GB (183.631.757.312 Bytes)
Number of Files : 85.578
Number of Folders : 0
Owners Enabled : No
Can Turn Owners Off : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 2
Partition Number : 1

Tab background color changes when saving or downloading (Ubuntu) - bug ?

I'm using Firefox 20.0 on Linux Ubuntu.
When I'm opening and using Firefox, the active tab background is light gray, and the other tabs are black (with white/gray text). But as soon as I have downloaded a file (saving an image for example, or a pdf), the tabs change color: the non active tabs turn gray instead of black, and the tab text is almost unreadable (gray on gray).
I have disabled ALL extensions (including the Ubuntu/Unity extensions) and restarted Firefox, and get the same result. See screenshot with before/after downloading: http://imagesup.net/?di=113687926169
On the other hand, when I start Firefox in safe mode, all is well, the tabs don't change color when downloading or saving a file.
What to do? Could this be a bug ?

Hey, I'm on Ubuntu, too.
It seems like you don't use Ubuntu's default theme, or at least, you have some modifications there, right? Try disabling your customizations to see if it works, I never saw / heard of this problem anywhere.
Also update your Firefox, there are changes that your problem is fixed after updating.
Another suggestion would be hacking about:config, for example, it might be the Download Manager's arrow flashing ( just guessing ), so you might want to disable that and see if something changes.
search 'browser.download.manager' in about:config and play with those configs to see if anything changes.

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

This app tab feature doesn't work for me: "Links to new websites open in a new tab so that your App Tab doesn't change".

I installed the new firefox 4 browser today. In the description about the new app tab the following feature is claimed:
"Links to new websites open in a new tab so that your App Tab doesn't change."
This doesn's seem to work for me. When I click a link in an app tab i just get redirected and my app tab changes. Is this a bug or a setting?

This is what the article here claims you need mobile share plan to work.
It shows it will work fine over wifi.
http://www.ubergizmo.com/2013/03/bbm-video-chat-on-att-will-require-a-mobile-share-plan/

9i jdbc driver change causes problems

Hello all,
I was wondering if anyone had any problems with jdbc when migrating to oracle 9i. We are using timestamps from java which were mapped to dates. In oracle there is a function which takes a date. Now this won't work anymore as the mapping changed. Question is, did anyone use the V8Compatibility flag before? I tried it and it doesn't seem to work. When looking at the jdbc implementation it seems to me that something is not implemented yet.
Any feedback?
Thanks in advance,
Rein

9i jdbc driver change causes problems

Nvidia 41.09 driver--- GF4 MX440??

hi
I ve GF4 mx440 and I m using nvidia 41.09 driver...
I m not satisfied the performance...
Do you know a better driver...??

If you want to try newer drivers newer than the 41.09, then you may want to take a look at the NVIDIA drivers at Guru3D and try the 43.00 driver. I am trying it out right now and it gave me a slight frames boost in a few games. I am running DirectX 9.0 by the way.

Not true: Links to other websites open in a new tab so that your App Tab doesn't change.

In the article "What are App Tabs", there's the following statement:
"Links to other websites open in a new tab so that your App Tab doesn't change." That doesn't happen when I make an App Tab in FF 7.01 in Win 7. I want it to happen, but it doesn't. Sometimes I want to keep Gmail open while I open an link in an email. When I click on the link, I expect a new tab to open, but it doesn't. Instead, the App Tab the contains gmail goes to the linked website. How can I stop this from happening?

*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

Temperature increase in nvidia tab w/ driver change

Similar Messages

Maybe you are looking for