Template changes not displaying in preview/browser

I am using Adobe Dreamweaver CS3 on a Mac OSX. A couple of weeks ago I made changes to a template page. The changes show up on the template page and on the site pages when I view them in dreamweaver. However, when I view them in a browser, whether locally or remotely, the changes do not show. I have tried recreating the site cache but to no avail. Has anyone got any ideas?

Have you cleared your browser cache?

Similar Messages

Dreamweaver CS6 edits to old Front Page site display in preview browser but NOT on live server site.

Howdy Folks,
My Dreamweaver CS6 edits to old Front Page site changes display in preview browser OK …But will NOT display on live server site.
To anyone who can step up to the microphone and speak “solution” I will be much grateful?
Bob MacDonald / VIPpromotions

Are you sure you are uploading the pages to the correct location?
Could you post a screen capture of your expanded files window, showing the remote server and local file structures?
I'm guessing they're not identical and that you may be uploading to a redundant root folder.

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

Changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
Thanks in adv
pinky

Just to add.
WAD templates are stored as HTML in the HTTP cache.
Whenever you make changes to the template - it is good practice to delete / invalidate the HTTP Server cache.
This can be done from
SMICM --> Goto (menu bar ) --> HTTP Server cache --> Invalidate --> GLobal
ust to make this thread complete..
However this is usually done for 3.x web templates since they run off the ABAp stack - not too sure about the JAVA stack - guess portal cache has to be cleared too..

HT2500 How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it.

How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS

Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.

Raw files not displayed in preview

In Elements 10, are raw files STILL not displayed in preview in Windows 7?

Thanks for your reply, Ken, but when I do the Get photos-From Files and folders thing Elements did the same thing it does for jpeg files but then I still can't see the raws. HOWEVER, this morning after reading your message I went back to Elements to get that message that Elements gave me after trying to get the raw files, so that I could quote it to you, and there were all the raw files that I had gotten and tried to view yesterday. So dawn breaks on Marblehead and I realize that maybe Elements has to be refreshed in order to see the raw files. Thanks Ken!
John Holstein Mobile phone: 82-10-4727-0264
Chongno-gu Myeongryun 1-gil 13, Apt. 401
Seoul 110-811
South Korea

CSS not displaying in preview

For some reason, with one particular site I am working on,
when I preview my page, the CSS styles do not display - they show
as a default font. However, I know the file is linked and in the
correct location in the root folder. All the CSS shows up fine in
design mode and when i upload the page to my server, just not when
i preview in any browser.
it's just kind of annoying and slowing me down - any idea why
this might be happening?

Is the stylesheet linked with a root relative link? Are you
using temp
files to preview the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"BullocksTroy" <[email protected]> wrote in
message
news:e6na5l$egj$[email protected]..
> For some reason, with one particular site I am working
on, when I preview
> my
> page, the CSS styles do not display - they show as a
default font.
> However, I
> know the file is linked and in the correct location in
the root folder.
> All the
> CSS shows up fine in design mode and when i upload the
page to my server,
> just
> not when i preview in any browser.
> it's just kind of annoying and slowing me down - any
idea why this might
> be
> happening?
>

Pge Template Popup not displaying the buttons

I assigned the template popup to a page. But now the button in that page is not displaying.
Any help?
Thanks
Deb

It's always helpful if you provide the following information up front with any question:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s) used
- Theme
- Templates
- Region type
I assigned the template popup to a page. But now the button in that page is not displaying.What is the purpose of this page? Is it actually a pop-up? Or just intended to have minimal structure? What button—what is its purpose? Is it in a region or item position? An HTML button or a template button?
The problem is not with the page template. while opening the page I am passing the printer friendly parameter as YES which I have to. And that i causing all the mess.Printer friendly mode typically applies some generic changes to how a page renders, one of which is not to show buttons.
Why do you have to have the page in printer friendly mode? And why do you want a button then to be displayed against normal convention?

Report is not displayed on the browser

We have a 9iAs Oracle application(built in developer6i(forms and reports) patch12).The database version is Oracle 9.2.0.6.0.My problem is I have a report that is called from the form. If the print_receipt = 'Y', display the report.I have also an afterreport trigger that updates this print_receipt to 'N'.Somehow the afterreport trigger fires before the report is display thus giving a blank pdf output on the browser.My user has new pc and new operating system, Windows XP but they're still using Novell Netware for signing on to the network. Before she does not have any problem displaying the report, she was using Windows NT4 and Novell Netware for signing on to the network.Is there any limitations in Windows XP that interferes with the report? Is this known problem in report's afterreport triggers?Is there a workaround here so the report can be displayed?Thanks for the help.

Hi,
Try this may be it will help.
Go to Iexplorer property - settings - Change (Check for newer version of stored pages to Automatically.
This error is coming because the report runs twice, so the after report trigger is fired before anything is displyed & hance your report is not displayed.
Thanks,
Awadh

Will not display pdf in browser window -

will not display downloaded acrobat files from the web in browser window - safari -
can save same download and view in acrobat and/or preview.

Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
If you are running Lion v10.7 > Known Issues | Adobe products on Mac OS 10.7 Lion

Columns in Dreamweaver CS3 Template Pages Not Displaying Correctly in IE8

I have a site that has most pages created with a template page that displays three columns below the navbar (counting a small column to the left for the logo at the top the table has four columns). The home page (index.html - not from the template) displays the same colums as the template pages correctly, but all the pages created with the template show the first column as way to wide and the next two columns as far too narrow.
I have trawled the internet to find a solution, but as my knowledge of HTML is limited it is proving near impossible for me to even find a relevant forum topic, let alone a workable solution. All I want is for the template pages with three visible columns below the navbar to display the same widths as those in index.html.
I am working on a mac and the pages all preview fine in Safari, Firefox etc, but not in IE8 on Windows 7 machines.
I have tried rather indelicately to shove various bits of code in to fix the width of the columns and render such commands as table-layout=fixed etc, but with absolutely no effect.
The site is: www.southoverfoods.com
If anyone can help I will be grateful.

You do want to fix these errors -
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.southoverfoods.com%2Fabout.html&charset =%28detect+automatically%29&doctype=Inline&group=0
Most are straightforward.
If you view the page in IE9, and click on the compatibility icon, the rendering looks right. Unfortunately, I cannot force that rendering with any of the accepted meta tag usages!
<meta http-equiv="X-UA-Compatible" content="IE=7" />
<meta http-equiv="X-UA-Compatible" content="IE=8" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
So I'm a little puzzled what to do....

Room Template Changes not reflecting

Hi,
I have a Collaboration room template called Community. In that I have the Quick Poll Maintenance iview. I was getting the following error while creating a quick poll. When I try to add an image to a response in the quick poll, it gave me portal error. This was happening only inside the Collaboration room and not outside. Then I changed the mapping of the property PathToImages for the iview in the template to private_docs_path and saved the template.
Now the error does not come in the new rooms that I create with this template. But the old rooms are still having the problem. Any idea why?
Alos, for my old room the template is being displayed as Community_&VER&22 and for new rooms is Community_&VER&28. Is there any way to synchronize the the template versions?
Regards
Ranjith

Hi,
which version of the portal are you using?
Starting with NW04 SPS 17 / NW04s SPS8, you can transfer changes from the template to existing rooms. Before these releases, this is not possible. Please have a look at http://help.sap.com/saphelp_nw2004s/helpdata/en/44/168eb1c3641a75e10000000a1553f6/frameset.htm
Kind regards
karin

Web Template Changes not visible after transport from Development to Test

Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly transported from development to the test environment, but we are still seeing the old version of the template when the report is executed. We are able to see the web template changes in the Web Application Designer in the test environment. We believe this is a caching issue and have cleared the query cache and the HTTP cache in SMICM. Unfortunately, this has not resolved the issue. Can you suggest another approach to resolve this issue?

Not sure what you mean by browser cache. We have deleted history, cookies, and all temporary Internet files. The issue isn't limited to a single user, but exists for all users. Through extensive testing we have established that you are able to see the web template changes in test in the WAD(Web Application Designer) after they have been transported from development, but can only view the changes when the web template is run for the first time. Changes to existing templates can be seen in the WAD in test, but are not seen when the report is run. The old version of the template appears to held in cache somewhere, but we haven't been able to find it and clear it.

911- textarea captured but can not displayed well on Browser with linebreak

Please have a look at point 1 and answer point 2. Please do any suggestion
1.
Here is a test.jsp code:
<script language="javascript1.2">
function OK()
alert(document.frm.textarea.value);
return true;
</script>
<%
if (request.getMethod().equalsIgnoreCase("POST"))
out.println(request.getParameter("textarea"));
else
%>
<form name="frm" method="post" onSubmit="return OK();">
<textarea cols="10" rows="5" name="textarea"></textarea>
<input type="submit">
</form>
<%
%>
2. when I enter
this is a test
thsss
we get the msgbox display
this is a test
thsss
which is OK.
Now when we're back to the server, which send to the brower
this is a test
thsss
but the Browser could not display as it is. On the browser, I use view source and see exactly whatever we entered
(/n or /n/r)
-- Paul.

the esiest way to make it work is to use <pre></pre> tag. In your case it will look like
<script language="javascript1.2">
function OK()
alert(document.frm.textarea.value);
return true;
</script>
<style>
pre{font-family:verdana;};
</style>
<%
if (request.getMethod().equalsIgnoreCase("POST"))
out.println("<pre>" + request.getParameter("textarea") + "</pre>");
else
%>
<form name="frm" method="post" onSubmit="return OK();">
<textarea cols="10" rows="5" name="textarea"></textarea>
<input type="submit">
</form>
<%
%>
Notice that I used a style sheet to change the default font for <pre> (you can write your own style sheet). Good Luck.

Nav bar sub menu and Slideshow not displaying in preview?

Hi,
My website, markmillerdesign.com hosted by godaddy is not displaying the sub menu or the images to the slide show.
I had to relink all of my assets because my computer was restored, but they all work until i preview in a browser or upload site.
My Nav menu is set to show all pages but the sub menu is still not working or coming up?
I have even made new slideshows and reinstalled images but they still do not come up in preview mode or on the web.
Is there a way I can diag this? Any ideas?
Please help!
Thanks.

I am now getting this same error on all of my websites. some of them I havent uploaded to or even updated for quite a while, is this a muse issue since the last update?
Please help !

Template changes not displaying in preview/browser

Similar Messages

Maybe you are looking for