Template Cross-Platform - Version Differences

I created a template in Dreamweaver 8 on a Mac and sent it to
a programmer using Dreamweaver MX on WIndows and the formatting for
him is messed up. Divs aren't lining up where I put them. He sent a
screen shot of his directory (which matches mine) and of the
template within DW MX and the divs are out of place.
Is this issue based on OS cross-platform, DW 8 to MX and
differences in how those versions handle MX or some other issue?
Thanks,
Brian

HTML is HTML, you know? It wouldn't make any difference if
you were
creating on a Mac, a PC, or a Linux box.
But - DMX is a dumb bunny when it comes to any advanced
layout methods. I
imagine the problem you are seeing is due to DMX's inability
to render CSS
layouts properly. Is your colleague using DMX6.0 or 6.1? If
the former,
they should at the least update to the latter immediately,
although that may
not fix the problems either.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yevri" <[email protected]> wrote in message
news:fce162$kui$[email protected]..
>I created a template in Dreamweaver 8 on a Mac and sent
it to a programmer
> using Dreamweaver MX on WIndows and the formatting for
him is messed up.
> Divs
> aren't lining up where I put them. He sent a screen shot
of his directory
> (which matches mine) and of the template within DW MX
and the divs are out
> of
> place.
>
> Is this issue based on OS cross-platform, DW 8 to MX and
differences in
> how
> those versions handle MX or some other issue?
>
> Thanks,
>
> Brian
>

Similar Messages

Installing the cross-platform version of jmf

I downloaded and exploded the cross-platform version of jmf on a windows nt box. I set my classpath to point to jmf.jar(per the setup instructions). I have a simple application that basically launches the movie viewer, but using this version of jmf doesn't allow me to view mpg's or avi's (these are the only file types I've tried). Installing the Windows version of jmf works fine, but am interested in getting the cross-platform to work the same way. Is this possible? Thanks,
chris

alelinuxbsd wrote:
This reference gnome 2.26 development for slack 12.2 said gnome 2.26 is planned to be released 18 march.
So I think that perhaps it is better to wait two weeks to be the package is ready and stable.
I can wait that long, thanks!

Does JMF2.1.1 cross platform version support dvi/rtp

hi!!!
does JMF2.1.1 cross platform version support dvi/rtp ,8000.0 Hz,4-bit format???
when i type java AVTransmit2 javasound:/0 224.0.0.1 22222 at the konsole in linux i am getting the following error:
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes
Audio not supported: interface TargetDataLine supporting format PCM_SIGNED, 44100.0 Hz, 16 bit, stereo, little-endian, audio data, and buffers of 22050 to 22050 bytes

hi,
I still dont understand well the jmf either, but i can confirm that i am able to capture audio (using javasound://8000) to capture at 8Khz, setting a processor model with this source, AudioFormat.DVI_RTP and ContentDescriptor.RAW_RTP
and my transmition happens well:
dvi/rtp, 8000.0 Hz, 4-bit, Mono
I JUST CAN CONFIRM THAT JMF 2.1.1 DO SUPPORT DVI/RTP 8000.0 4BIT
as per the documentation, a processor model requires:
1. a datasource
2. an imput audio format
3. the output content description
one will think then that the audio imput should be linear and the output should be div/rtp, but it seems it doesnt work like that, im digging on the docs with no success till now, so by experiments i can say that somehow the imput audio format, already tells the kind of coder one will use, that case, DVI/RTP. This means, the data is encoded to a special DVI format who prepare the packets to be Transmitted, and then on the output content one says, is data ready to be transmitted, since is already packetize you say just content is raw or raw_rtp.
you can not for example say, then ok, convert my imput to a DVI and then packetize it to a (DVI)/RTP, because in this case you will have, starting from the capture device:
LINEAR convert to DVI> DVI packetize> DVI_RTP -----> Tx
why not? because there is no codec that receives DVI and convert it to DVI_RTP,
the only one we got is com.ibm.media.codec.audio.dvi.JavaEncoder
this one is only able to take linear and convert it to DVI/RTP
so you have to use the model
LINEAR ----> DVI/RTP -----> CONTENT = RAW ----> tx it, sink it, but not write...
to write there are more problems, but that was not the question, just tx
if someone can explain this better or point to a docs were it is explain it, ill appreciate,
regards,
jahm

Suggestion on using Cross platform JMF

hi all,
I have been using JMF windows performance pack to run audio and video in an applet.After creating jar file out of that, i tried running it in another system and found that,my jar file executes only after installing JMF in that system.How to solve this problem.What if i want to execute my jar file in other platforms such as linux,mac os x,etc.Should i use CROSS PLATFORM JMF.Please help me solve this problem.
Thanks in advance
Regards

The performance pack versions of JMF are "generally" just for video capture functionality, eg. webcams and tv cards.
If your code just requires JMF to play media ( video/sound) then I suspect you can get away with the cross-platform version. But if you need video capture, then that's too intensive for pure java, and Sun had to use native code, which required the separate "performance pack" releases.
regards,
Owen

FlexBuilder 3 cross-platform pricing

Although I welcome the new pricing model for FlexBuilder 2
($249) I would like to see a cross-platform version for OS-X,
Windows and Linux (including Design Mode :-) at the same price. As
a freelancer and Java developer I often switch OS according to the
need of the customer and I am would be very reluctant to buy 3 OS
versions of FlexBuilder or running an extra VM just for
FlexBuilder. All of my current Java software is cross-platform
(i.e. the serial is the same): IntelliJ IDEA, JFormDesigner, Oxygen
XML Editor, SmartCVS, SmartSVN - the list is endless. In fact -
FlexBuilder would be the only product that does not support this.
What do you think?
Thanks,
Peter

To follow up even further, the license for Flex Builder 3
will be multi-platform so that you can work in different
environments.
Matt
Adobe

Cross platform, multiple versions, multiple architectures.

I am fairly new to Illustrator plugin development. I played around with the ADM on the Windows side and got that working. Then realized we needed to build a plugin to run on Mac. And although the SDK says you can target multiple platforms in the PiPL, it never really worked right.
Now I'm working on Mac with Xcode. I'm running CS5. Some of the machines I'm developing for are running CS4. I've tried building the samples from the CS5 SDK and they work on my machine great. When I build the CS4 SDK samples the tester can't load the plugin. (LiveDropShadow). Do you think it is the version of Xcode? I targeted the right OS version... made sure of that.
So next question.. can I build/deploy the same Flex UI in CS4 and CS5? Any tips/suggestions?
thanks,
Will

You can absoultely hit both CS4 & CS5, Mac & PC -- we do! Hell, we used to hit CS3, CS4 and CS5
Your problem with CS5 & CS4 is probably that you're using a suite version that is only available in CS5. When Adobe updates a suite, they still make the old version available, but the headers will always use the version that shipped with their Illustrator by default (makes sense). So, for example, the Art Suite might be version 14 in CS4 and 15 in CS5. If you use the CS5 headers, kArtSuiteVersion is 15, but 15 doesn't exist in CS4.
Its easy to see if that's the problem -- add a message if AcquireSuite fails and have it print out the suite & version that failed. If that's the case, you'll just need to look at the CS4 SDK and figure out what version it shipped with (likely one less than you requested!). If you're not using anything added in the CS5 version, just switch the types & version requested to the CS4 one and after a recompile, you should be fine. Of course, this may repeat for several suites It might be faster to look at what suites you're requesting and then just check each one. A fast way is to look in the legacy folder -- if theres an AI140*.h version of your suite, that means it was updated in CS5, and you'll run into this problem.
As for the ADM, well, we had the same experience. That's why we switched to Qt. There are undoubtedly other cross-platform toolkits you could use, but that one will work (albeit with some work). The next version of Illustrator won't even have the ADM in it, so its definitely wise to avoid the ADM at this point.
I'm not too familliar with Flex, but I believe you can hit CS4 & CS5 with the same UI. I'm not the one to answer that unfortunately, as we don't use Flex. There's another thread from the last week that discussed the finer points of 3rd party vs Flash UI that you might find useful. It should be one or two down from this one in the thread list.
Good luck!

Question about education version of cs6: once per year restriction and cross platform

I am an education use of cs6, which I currently use on my mac. I now have a windows pc, which I would also like to use cs6 on concurrently. My understanding is my existing license doesn't cover cross-platform use, so I would have to buy a new license. However, education licenses also have a once per year restriction (ie. you can only buy 1 license per title per year). So my question is, for the purpose of the once per year restriction, does the windows version count as a different title from the mac version (ie, is it once per year per title per platform)?

http://www.adobe.com/uk/special/education/students/studentteacheredition/order_fulfillment .html
RESTRICTIONS ON USE
You may purchase only one license per platform of any Adobe Student and Teacher Edition product per year. Purchases of suite editions (such as Design Premium or Master Collection) are limited to one title per platform per year. Adobe Student and Teacher Edition products may be used only on your privately owned computer and may not be resold.
Even though that's a UK link, I cannot find any other info on Adobe's website which is similar in content so I assume those rules are global.

Old Macromedia - Adobe cross platform font issues

This message is more directed to Adobe.
I am aware that currently OpenType fonts are cross platform compatible but only with Illustrator, Photoshop and InDesign.
However, my primary workspace is Fireworks-Flash. There are serious cross platform issues with fonts - I have looked at truetype, postscript and opentype and they all have issues translating onto PC - many of the styles are not available.
In our studio I design on Mac but our Flash developers are on PC - our final renders and review renders always need to happen on Mac as a result of this cross platform issue. This is a little inefficient.
When is Adobe planning on resolving this issue?

"I am aware that currently OpenType fonts are cross platform
compatible but only with Illustrator, Photoshop and InDesign."
No, they are fully cross-platform compatible. The Adobe products you
mention, along with a very few others, are the only applications
capable of taking full advantage of the advanced features available in
some opentype fonts. And even the three products you mention don't all
necessarily support open-type in the same way.
"However, my primary workspace is Fireworks-Flash. There are serious
cross platform issues with fonts - I have looked at truetype,
postscript and opentype and they all have issues translating onto PC -
many of the styles are not available."
If you are using the same application version on both platforms, you
should have identical functionality. If you're using an older version
of Fireworks.
The only cross-platform style issue with TT or T1 fonts is that
Windows doesn't recognize any styles other than Regular, Bold, Italic,
and Bold Italic. Also, there's a font menu difference between MacOS
and Windows. Mac display all available styles, whereas Windows only
displays the family name, and you have to select the variants from
somewhere else (typically "B" "I" "U" buttons). SOME font families
from some vendors use the style function to define such variants as
Small Caps, Light, etc. MS products get ... confused.
"In our studio I design on Mac but our Flash developers are on PC -
our final renders and review renders always need to happen on Mac as a
result of this cross platform issue. This is a little inefficient."
If you're using different applications for design and rendering, and
their functionality is different, then you have a cross-application
compatibility issue. You didn't mention what applications or versions
are involved.
"When is Adobe planning on resolving this issue?"
It may be more a Microsoft issue than an Adobe issue. In addition to
the style limitations, There are no MS products that yet support
open-type features.
Although Adobe personnel do sometimes visit here, this is not a
"talk-to-Adobe' forum. Since your problem is application related, I'd
suggest taking it to the appropriate application forumsFireworks
General Discussion looks right.
And, as Bob said, you might also contact Adobe support directly with
your concerns.

Cross platform CS on PC to CS3 on Mac does not work like video says

Your video on cross platform workflow states that you can import older Premier CS files on a PC into CS3 on a Mac. I tried this and get the message, "this project was saved in a aversion prior to Adobe Premiere Pro CS3 and cannot be opened on a Mac. Please refer to the User Guide for import options." I guess I have to assume then that the video, www.adobe.com/go/vid0236, is wrong about this? Can someone please explain how I can salvage the work I did 3 years ago on Premiere Pro 1 on a PC when I am now exclusively working on the Mac in CS3?
Thank you.

Ty,
This has come up a few times and the solution is to find a PC CS3 user, who will Open the Project and then Save it in CS3-CS4 for you. I does mean that you'll have to befriend a PC-person, but who knows, maybe you can reciprocate later on. In each previous instance, this workflow, PC to PC to Mac worked perfectly. Note: the same holds for Encore Projects, and there is some PC to PC incompatibilities between very early versions and later versions. I had to Open and Save an Enocre 1.0 Project in CS2, so a CS4 (only) user could then Open in CS4. This stuff happens, and the skip in Mac porting can play a role in it. If I had CS3 on my PC's, I'd do it for you, but CS2 will not hlep you.
I believe that P 6.5 was the last previous version ported for the Mac, until CS3.
Good luck,
Hunt

I updated to 1.9.2.15, response Platform version 1.9.2 13 incompatible with 1.9.2.15. Unistalled everything, tried again fron clean PC, same result!!

I was informed of 1.9.2.15 upgrade, accepted and it downloaded in the normal manner. When I tried to launch Firefox at the end of the install the on screen response was "platform version 1.9.2.13 is incompatible with min> 1.9.2.15, max< 1.9.2.15.
Tried a second time from EU download site, no difference. Uninstalled Firefox, still same result. cleared PC of all Firefox programs, and any other firefox related file, cleared Registry and Folders. Checked that "Search" gave a negative to a Firefox enquiry. Downloaded again and still have the same on screen reply, I am forced to use IE8 (for the moment!!)

Have you tried following the instructions at [[Installing Firefox on Windows]] and used the official site for downloads http://www.getfirefox.com/
Note the latest version is '''Firefox 3.6.15 ''' ( user agent string - on my system - Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; '''rv:1.9.2.15''') Gecko/20110303 Firefox/3.6.15 ( .NET CLR 3.5.30729; .NET4.0E) )
Perhaps someone else can provide better advice, but I do not expect an incompatability message if you have no firefox currently installed. I wonder whether you are trying to install and search from a limited account . You must use an administrative account.
A typical post about this problem is: http://support.mozilla.com/en-US/questions/790087 note the specific advice about the default location (I am presuming this is the same in XP & Vista)

Need Help in Cross Platform Migration

Hi Gurus,
can you please tell me best way to do Corss Platform Migration with minimum down time and we are planning to do from AIX TO HP-UX.
oracle version is 10g
and can we do the data sync using streems if it is can you give the steps to configure streems in cross platform.
Thanks in advance.

High Availability Customer Case Studies, Presentations, Profiles, Analyst Reports, and Press Releases
[http://www.oracle.com/technology/deploy/availability/htdocs/HA_CaseStudies.html?_template=/ocom/print]
Check under Transportable Tablespace at the bottom
[Multi Terabyte Database Migration|http://www.oracle.com/technology/deploy/availability/pdf/TheHartfordProfile_XTTS.pdf]
HTH
Anantha

Which product to purchase (cross platform necessary from Mac to PC) Adobe Photoshop 6.0.x to ???

I have ancient Mac photoshop and pagemaker files. i need best cross platform product for windows that can access these files. adobe photoshop is my primary concern. I understand the indesign cs2 will import old school mac photoshop 6.0.x but is not compatible with windows 7 ... thank you.
In particular we use windows 7 x64
So in summary, need to determine which Windows 7 x64 version of Indesign CSxx will still open archaic Mac Adobe files (layouts, EPS, etc). Or is there a similar product that must be obtained. I prefer to stick to Adobe products, however, if I must go elsewhere and you can help -- please advise.
Also, if you know what I should obtain, does this product have a trial download option that I can test functionality before purchase? Warranty when I do buy information -- and return policy in general?
Many thanks.

PM support has long been pulled from InDesign. You are going to need some old version like CS or CS2 and save an intermediate step to ID files. PS is not a probelm at all. All programs have 30day trials and Adobe has a general 14day return policy. Refer to the product pages on teh website.
Mylenium

PDF with special characters (é, ñ) needs to be legible cross-platform(mac & pc)

I am using Illustrator to design a PDF. Because it's in Spanish, accent marks and other special characters are needed (á, ñ).
When I export the PDF from the ai file and view it on my mac it looks fine. However, when I open it on a pc some of the special characters are completely missing.
I tried Creating Outlines with the text, although it will make it harder to update in the future and so less preferable to leaving the text editable. Creating Outlines works fine on the mac, however on the pc the L's appear thicker than they actually are.
Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Thanks!!

Does anyone know how to make special characters legible cross-platform when creating a PDF using Illustrator?
Yes. You use a correct OpenType font that has the glyphs in the place where they belong and can be embedded without limitations. Older TrueType or PostScript fonts are simply unsuitable as are fonts that cannot be emebdded and require to be installed locally. It all comes down to system language settings vs. the unified environment inside acrobat. This also requires any PDF to be created on systems with the language settings correct in the first place, i.e. creating Spanish text with a Japanese version of AI would be pretty desastrous due to how foreign language fonts are accessed... check these things and then try again. If possible, enforce embedding of the full font in the PDF settings, not just a subset and choose a suitable font.
Mylenium

Are cross-platform upgrades allowed?

I own a copy of Adobe CS3 for Windows. I have recently purchased a Mac, and need to get Adobe Creative Suite (preferably CS6) set up on it. Do I need to buy a completely new version of Creative Suite for the Mac, or can I buy a Mac upgrade version, and then use my serial code from CS3 Windows version to validate the upgrade version on my Mac? If I can do that, is it allowed to also buy an upgrade version of CS6 for Windows, and install that using the same CS3 license key to validate the upgrade version on Windows?

Yes ,it is possible to upgrade from cs3 to cs6 & that also cross platform, yes it should accept the windows previous version serial key , The Enter Serial Number Upgrade dialog box also accepts the Windows serial number{if not then contact Adobe support }.
The best option is to place the order through the adobe sales team
800-585-0774
Monday-Friday
9am-10pm (Eastern Time)

Golden Gate 11: cross platform replication

hello,
wonder if there are any cross platform (major) issues for establishing a two way replication between Sparc Solarix 5.10 to x86 Linux based hosts ?
RDBMS versions are same or 11.2 vs 12.1
We are planing to use 12C gg on a new installs.
thank you

Hi,
It would be better to ask this question in the GoldenGate community forum -
GoldenGate
or if you have access to My Oracle Support in the MOS forum -
GoldenGate, Streams and Distributed Database (MO
Regards,
Mike

Template Cross-Platform - Version Differences

Similar Messages

Maybe you are looking for