Template does not fit into the window

Hello all,
<b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
I am getting the above error in when i try to preview my smartform.
The template is in footer window. I have only 3 lines in the template.
And the size of template is less than window size.
I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
If you have any suggestions Please help.
Thanks.

Hi,
Please check the following points:
1. Font size and font family.
2. Line spacing
3. Allignment.
4. Left and right margin
Deserve Rewards.
regards.

Similar Messages

  • Getting "Table %TEMPLATE does not fit into window" error

    Hello,
    I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
    This only happens when I go to that printer.  I can print fine to a laser printer.
    I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
    I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
    Has anyone seen this before?  Please help.   Thanks.

    Hi James,
    You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
    What ever you create should be within this width and height .
    So accordingly adjust the width and height of your windows and components within them
    Regards,
    Dep

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

    While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
    Can someone help us in resolving this
    Thanks and regards
    RS

    Please expand the log also please check the SAP note 1835436
    Regards
    Aneesh

  • 10g form canvas not fitting into the window....migrated from 6i

    I have some forms that I migrated from 6i to 10g on an XP machine. The entire form is not being displayed. I increased the size of the applet window in the ODS environment. This did indeed get larger, but did not rectify the problem. I then tried to increase the size of the canvases and windows on the form. The only thing that this accomplished, as you might expect, is that it just added scroll bars to the form so that I can see the entire form by adding a scroll bar so that I could scroll to see the entire form. What I need to do is to display the entire form without having scroll bars displayed. Help will be greatly appreciated. Thanx. Paul

    Is your form displaying inside the browser window or in a separate window?
    If you maximize the window, is your form still being cut off (displaying blank space to the right or at the bottom)?

  • The backgtround I put in my template does not follow into the actual web page.

    I have followed all the steps to make a template and then pages from the template. Everything follows except the background. What could cause this? I am working in cs4.

    Did you insert your background into the Template CSS code or an external style sheet?
    Can we see your CSS code?
    Nancy O.

  • Verify by Visa does not fit in the window

    The Verify by Visa page is too big for the window
    as a result one cannot enter all the security information to complete the purchase
    the only way to make purchases is to use something like Internet Explorer for online shopping - Verify by Visa works on that platform.

    Did you try to reset (Ctrl + 0; zero) the page zoom (or zoom out: Ctrl + -) on that page to see if that helps?
    If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

    The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2.  Has anyone seen anything like this before? I've included a picture

    You can return a new Mac within 14 days of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.

  • I have bought an Iphone 4 16g but the Tmobile Sim card which fitted my IPhone 3 does not fit into the IPhone 4

    If anyone has any advice or information I would be very grateful. It appears that the Sim "holder" is too small for my Sim card used in the IPhone 3.

    You should get a new micro-SIM from T-Mobile. It is possible to cut down a standard SIM, but often that leads to erratic behavior or destruction of the SIM.
    Regards.

  • Window does not fit into page

    Hi all,
    I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM. 
    But its showing an error like 'Main window does not fit into Page'.  
    What could be the mistake?
    Can anyone help me in this..
    Regards,
    Shanthi

    Hi,
    U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
    if Your Space is small then data will be displayed in the next line.
    And display The data in Smallest  font possible.
    Regards
    sandipan

  • Table does not fit into window.

    Hi Guys,
    When I execute the Smartforms I get this message ? '
    "Table does not fit into window."   any guess why this message ?
    Regards

    >
    P R Raghu wrote:
    > "Table does not fit into window."   any guess why this message ?
    > Regards
    If TABLE does not fit WINDOW try to take it through the DOOR LOL
    Doesn't the error seems self explanatory to you?
    Regards
    Karthik D

  • Error:   Table TEMPLATE_HEADER does not fit into window.

    Hello Experts ,
    I met a very strange problem.
    I am printing a process order using smartform.
    for other process nrs , print perfect.
    But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
    At beginning , I suppose my table line extend the mainwindow width. But infact , no!
    I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
    so , does someone met this error before ?
    Please help me!!
    Regards
    Kevin

    Hi Kevin,
    Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
    must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
    For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
    If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
    Regards,
    Aidan

  • "Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

    I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
    Thanks

    It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
    Any luck?

  • Photo does not fit in the screen

    I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g     and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image  3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
    Thank you for your help.
    Heike

    Hello again,
    I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
    I got rid of the stroke and the fill.
    I filled with a .jpg image 3000 px wide.
    For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
    I still have no idea, what I made wrong. Thanks for your help
    Heike

  • Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

    Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

    Clean the lint or grit out of it with canned air or a toothpick.

Maybe you are looking for