Template does not update pages

When I change a menu item in a template (located in the Template folder), and attempt to save it, DW asks if I want to update all pages created w/this template. When I hit OK, all seems well. The log shows all pages have been updated. When I preview, the browser displays a message that xxx.html cannot be found in the Templates folder.
When I restored the entire site from a Time Machine backup, the problem persisted.
Any help would be most appreciated.

Not a templates user, but I am asking why your page is looking for a file with an HTM extension in the Templates folder. As I understand it, only template file(s) with the dwt extension should reside in the Templates folder.
Can we see your code to determine what is calling for that HTM file?

Similar Messages

Updated Template does not update pages

When I update and save a template it does not ask if I want to update the pages that use that template. I recently down loaded and reinstalled all my Adobe applications. Is there a parameter that has to be tuirned on to fore pages to be updated when the templete is changed?
I am using CS 6.

Have a look here http://forums.adobe.com/thread/953304

Captivate 6 - Updating template does not update project

Hi ,
I am just learning Captivate 6 and have started by creating a theme and then a template. If I create a project file using the template and then go back and make a change to a graphic in the template should it automatically update the project file or do I have to apply the template to the project file again some how? Currently if I make a change to the template it does not update the project file.
Thanks,
Richard

Hi there
Have you ever inserted a document into a copier and made a copy?
If so, this is really the way Captivate templates work. They are designed so you have a consistent look and feel to projects you create from them. So returning back to the copier analogy, once a copy has been made, any changes to the original are NOT reflected in the copy created from the original. But future copies WILL have the changes as the copies were made from the altered original.
Likewise, any changes to the Captivate template are only reflected in the Template as well as Future projects you create using the template. Once created, there is no longer any association with the template.
Cheers... Rick

When I update template, it does not update other pages

I have created a template .dwt (XHTML) and have some .html pages. The problem is when I update the .dwt (XHTML) pages it does not update the other pages. I have tried everything but the other pages do not update. Could it be something to do with the folder files on the right which aren't selected properly? If so how do I update my source folder so that this will work?

Hi,
When you update a template, do you get dialog to update the other files? Launching those html files, do you see those related to your template?
Please also provide more information like which version of Dreamweaver are you using and on which platform?

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer
First i install CS6 on the new computer
copy the projects
import the websites
Now, when i change any template the pages do not update any more. New pages working correct. Also manuell updating works.
Any Idea?
Where are the info about the join template and the pages. Seems on the old computer - but where?
Thx

hm?
now I made a new page from the template on the new machine - and find one difference:
New Page:
<!doctype html>
<html lang="de">
<head>....
Old Page:
<!doctype html>
<html lang="de">
<head>...
The slash / after template=" is not there on the new machine. If i remove the slash on the copied pages and restart dreamweaver then it works. A lot of work, but i can solve my problem this way.
Maybe there is some checkbox for path handling...?

Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is empty

Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Importing element definition from an EDD into a template - does not work

FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
Thomas

Lynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From:   Lynne Price <[email protected]>
To:     "Th. Zeisig" <[email protected]>
Date:   13.10.2011 14:12
Subject:        Importing element definition from
an EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
Valid as the highest-level element.
General rule: (
When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
Can you send me a short EDD that fails as you've described?
Thanks,
      --Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Pthread_once() does not update __pthread_once_pad

Having a problem where pthread_once() gets called, but does not update the __pthread_once_pad[3] to show that the init routine was called for the associated pthread_once_t var.
The init routine gets called, and the resultant pthread_key_t variable can be used to call pthread_setspecific(), but a resultant pthread_getspecific() will fail. I can see in gdb that the __pthread_once_pad[3] value is unchanged.
This is happening on SOlaris 9 SPARC with gcc 3.3.2, and on Solaris 8 x86. The code works on Linux with an older gcc and also on Solaris 8 SPARC with an older gcc.
We can write our pthread_once() to increment the __pthread_once_pad[3] value and call the init function and it will work fine.
Any clues?

I don't have an installed seat of Pr + AE CS6 accessible at this time so I can't check it with those versions. I see no bug in CC 8.n though, so I tend to agree that it may be a bug specific to your local setup or some specific step we don't yet know about. In any case, I should clarify a couple of things to make sure we're all on the same page about how DL works with AE:
1. You're really just 'rendering' preview files to make playback a little better. You're not actually rendering anything from AE in PrPro to give you a standalone media file.
2. Due to the nature of item #1, there really isn't any architectural way you could actually break the Dynamic Link of any imported files by just building previews for them, because it's just referencing an additional cache file to improve playback.
3. If you make changes in AE to a rendered comp in Pr, then it will show red again in the sequence and you will need to re-render if you want that playback boost back. This is as designed.
4. If you want to truly render (aka flatten, or render and replace) an AEP in CS6, you need to export it as a standalone media file from AE and import that file into Pr.
5. It's possibly that DL itself is malfunctioning, in which case you may need to quit AE or Pr or both and maybe even re-import (via DL) the file agin.
6. It's good practice to browse to an AEP in the media browser, then import it from there using the Dynamic Link Import dialog. This is not required, but we've heard of cases where some import problems are avoided in this way. Also using the media browser to import in general is good because it previews folder dependent files in a better way.

Approval Workflow does not update the Content Approval status if started automatically

Hi,
I’m using a simple Approval Workflow associated with
Content Approval on site pages. It works fine when I set it to be started manually (by using
Allow this workflow to be manually started by an authenticated user with Edit Item permissions
option) and on the completion of the workflow the
Content Approval status is updated accordingly. But when I set it to be started automatically (by using
Start this workflow when a new item is created
/ Start this workflow when an item is changed
options), it does not updates the Content Approval status. Note that I’ve set the
Update the approval status after the workflow is completed (use this workflow to control content approval)
option to true.
Regards

Hello,
It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
a library.
According to the Notes for “Enable Content Approval” option in
this reference:
If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
of an item check box on the Add a Workflow page..
If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
start manually.
That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
Thanks & Regards.
Lily Wu

Word label template does not line up with avery 5160 8160 paper, Mac Maverick

Word label template does not line up using avery 5150 or 8160 paper

These forums are for Apple products and the best place to ask about problems with MS stuff is in there newsgroups:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
When you don't see Post New Topic, it means you are not in a Forum but a Category page listing one or more Forums. You need then to enter a Forum by clicking on one. Then you will see the Post New Topic item at the top left.

Paged dataset does not update it's child dataset

My paged dataset works great, except on refreshing it's child
dataset, when sorting or navigating from page to page.
Clicking on the record in the paged dataset does return the
correct child dataset record. Clicking on any of the column headers
to sort the paged dataset or clicking on any of the page functions,
i.e. Next Page, Previous page, does not update the child dataset
record.
The first record of the paged dataset is set to 'selected',
after sort or page navigation function.
What am I missing?
Here is the code that updates the child dataset record:
onClick="pvPOrders.setCurrentRow('{ds_RowID}');"
Here is the sort:
onclick="dsPOrders.sort('PONUM','toggle');"
Here is the page navigation:
onclick="pvPOrders.nextPage();"
There are no observers. The code can be viewed here:
http://codeshare.ulatu.com/mare3184

Hi Doug,
You shouldn't have to do the manual setting of the
currentRow. The fact that your code snippet here:
http://codeshare.ulatu.com/mare3184
Has your PagedView data set pvPOrders depending on dsPOrders
means that when you set the current row on pvPOrders it just
forwards the set request on to dsPOrders.
I'm a bit confused by the other snippet you posted here:
http://codeshare.ulatu.com/marc0722
because I don't see any mention of a PagedView in that
snippet. In any case, I mocked up something that should be similar
to your situation, and it seems to work just fine:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<script src="includes/xpath.js"
type="text/javascript"></script>
<script src="includes/SpryData.js"
type="text/javascript"></script>
<script src="includes/SpryPagedView.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<style type="text/css">

</style>
</head>
<body>
<input type="button" value="Prev"
onclick="pvStates.previousPage()" /><input type="button"
value="Next" onclick="pvStates.nextPage()" />
<p>Select a State:</p>
<div spry:region="pvStates dsStates">
<div>{pvStates::ds_PageNumber} of
{pvStates::ds_PageCount}</div>
<ul spry:repeatchildren="pvStates" spry:choose="">
<li spry:when="{pvStates::ds_RowID} ==
{dsStates::ds_CurrentRowID}" spry:setrow="pvStates"
spry:hover="hover" spry:select="select" spry:selected="">
{pvStates::name}
</li>
<li spry:default="" spry:setrow="pvStates"
spry:hover="hover" spry:select="select">
{pvStates::name}
</li>
</ul>
</div>
<p>Cities for the currently selected state:</p>
<div spry:region="dsCities"
spry:repeatchildren="dsCities">
{name}
</div>
</body>
</html>
--== Kin ==--

Podcast does not update on iTunes

Podcast does not update on iTunes
the url
http://itunes.apple.com/tw/podcast/id335308817
the last date is 2010/6/17
But the feed url
http://iphone.realma.com/podcast/ettv.xml
the last date is 2010/10/21 and daily update
Why? Is there any thing wrong in the feed url?
Thank you!
Message was edited by: realma

I'm afraid I can't make any sense of this. the iTunes Store page lists 301 episodes from 12 January 2010 to 17 June 2010. If you click on the 'subscribe free' button your iTunes application subscribes to the feed at the URL you give, which contains rather fewer episodes from 17 September 2010 to 22 October 2010 (today).
It's not unknown for something in the feed to be OK with the application but not the Store, but the feed validates in FeedValidator and I can't see anything wrong with it - it's almost impossible to read as it's all on one line, but it doesn't seem to contain any of the usual culprits.
The only explanation which would make any sense (and which doesn't seem to be the case) would be if the feed had been complete only to 17 June until a few days ago, and you only recently replaced it with the current set of episodes: it normally takes 1-2 days for changes to appear (so even under normal circumstances today's episodes wouldn't appear yet in the Store, only on subscribing). Since your feed contains episodes back to September this doesn't seem to apply, but I can't see any other reason.

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Template does not update pages

Similar Messages

Maybe you are looking for