Template files missing

After install Lion on opening my sites with iWeb, each page comes up with a window indicating that several png and jpg files (part of the template) are missing.   Has anyone else experienced this and what can one do.  The files themselves show up (once unhidden) in Finder.
Thanks
Jack

You could try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... to see if that fixes it.

Similar Messages

  • XML publisher report with a template file missing

    I get the following error
    Active template file not found in the template definition <TEMPLATE_NAME> for date <EFFDT>. (235,2515)
    PSXP_RPTDEFNMANAGER.TemplateDefn.OnExecute Name:GetActiveTemplateFile PCPC:15872 Statement:346
    but in
    Reporting Tools > XML Publisher > Report Definition > Template tab
    I did have the setting Effective date, what cause the problem?

    Have a look at following post and run the sql in this post to see if your template definition is missing.
    http://peoplesoft.wikidot.com/xml-publisher-template-file-missing
    You could also run Application Engine PSXPCLEAN to clean orphan rows.
    Are you running the report online or through PeopleCode?
    In last case make sure the effdt is set correct in PeopleCode.
    Also have a look if your server time settings are correct.
    Hakan

  • Database Template File missing

    Hi everyone,
    I'm trying to set up a installation of OCS over multiple computers. The Infrastructre installation works fine withouth any error and all services are up and running. Now I'd like to install and set up the storage database. While running the DBCA, I get an error message stating, that the database layout template file with the extension .dfj is missing. Is this a common problem or could it be that something went wrong while unzipping the file?
    The template file for the Infrastructure database is located in both the unzipped installation files AND in the home directory for the Infrastructure.
    The installation of the information store also was successfull, but as stated above, i only get an error message while configurating the new database...
    Is it possible to tackle the problem in creating a standard new datbase with this assistant?
    thank you and happy new year in advance
    stefan

    Just bumping this thread because I am having the same problem. Is there some configuration setting I missed during installation or can I find this "Transaction_Processing.dfj" file somewhere else?
    Thanks for the help.

  • Missing Template file on IM Installation

    Hi,
    I am installing JCS on a single host and I am getting an error when in stalling the IM server:
    Deploying Messenger Resources...java.lang.Exception: Template file does not exist: /opt/sun/comms/im/html/WEB-INF/web.xml.template
    I have found this file in other locations and tried copying it to this location and rerunning the setup but still get the same error.
    Any ideas?
    Many thanks,
    Richard

    rm99 wrote:
    Hi,
    I am installing JCS on a single host and I am getting an error when in stalling the IM server:Which version of IM have you installed ? Also to which web-container are you trying to deploy IM to ?
    -Swetha
    >
    Deploying Messenger Resources...java.lang.Exception: Template file does not exist: /opt/sun/comms/im/html/WEB-INF/web.xml.template
    I have found this file in other locations and tried copying it to this location and rerunning the setup but still get the same error.
    Any ideas?
    Many thanks,
    Richard

  • Which template file is used for DITA 1.2 publishing?

    Hi all,
    when I save a ditamap as composite document, which template file must I edit to change the layout?
    So far I have modified the topic templates (task.template.fm etc.) but I have not found the template relevant for the output yet.
    Update
    The ditafm_output.ini file contains the line CompositeDocTemplate_1.2=ditabase.template.fm but exchanging all ditabase.template.fm files in the FM directory did not do the job.
    This seems like is a very basic question so I wonder why it is not documented - or am I missing something? The only workaround I found was to manually import the EDD and formatting from my template into the FM document each time after publishing.
    Robert

    Either I'm confused about dates, or there's a harmonic convergence going on.  I am just now grappling with this problem myself and lo, here is a discussion that started yesterday!
    So far I have tried altering the Struct Apps file to specify which template to use in the DITA_1.2_ditabase applicaton, and I have tried editing the template file stored in ...\AdobeFrameMaker11\Structure\xml\DITA_1.2\app\technicalContent\template\ditabase.templ ate.fm...  Neither of these activities makes a difference.  So when Maker saves a DITA map as a composite document, does it use any of the applications in the App Definitions file?  Or is it using hard-coded magic for some unexplicable reason?  If the latter, that should be logged as a bug. 
    I'm getting convinced that Maker doesn't use the Struct Apps file at all when saving as a composite doc because I have deleted all app definitions from the file except DITA_1.2_ditabase.  I still get the same results no matter how I define the template.  Then when I use Scott's trick to check which app created the document, it shows DITA_1.2_ditabase -- BUT, the Set Application list shows the full set of apps that I could choose from the default struct apps file.  (Yes, I have loaded my changed struct apps file -- and verified that it has only one app in it by restarting Maker and choosing EDIT struct apps file...  It has a single app as expected.)  So I don't believe I have reduced the set of defined struct apps at all, even though I have only one app in the loaded struct apps file!  Where is this information coming from, and why can't I control it?  In short, this area of the product is unpredictable for my feeble brain, and I can't afford to spend any more time on it.  I have deadlines to meet.
    Bottom line, I can't seem to do ANYTHING that will change Maker's behavior when saving a dita map as a composite document.  This is a real problem, BTW.  It means that my daily work flow always includes the stupid, manual steps of importing formats and EDD from another template after I create the file!  Can this possibly be acceptable behavior?  Note to Adobe...  This is the sort of thing that drives a customer to use a different product.

  • Premiere Pro CC Title templates are missing + cannot be installed

    hi,
    I just realised that I don't have any title templates but i need them quiet urgently.
    I went on to this website: Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
    where it stated that you have to download a zip file and place it in the presets folder of Adobe Premiere.
    I did that but it wasn"t working. Then I took the Premiere Pro Family Content Installers folder and wanted to install it in order to place it in the presets folder and the installation always gets broken off stating that there is an error.
    Is anyone familiar with that kind of problem and if yes, does anyone know how I can fix it?
    Thanks in advance.
    Mascha

    Did you follow this part of the instructions on that link?

  • 11i Driver files missing

    Hi,
    While applying patch i errror about some driver file missing, i checked the location and file was not their, i traversed throught various top and many folders are not their in product tops, even if folder is their files are not their, is their any way i can create driver files now. This is same for $AD_TOP, or $ABM_TOP or $FND_TOP.
    I am on 11.5.10.2.
    Thanks,

    Hi,
    While applying patch i errror about some driver file missing, i checked the location and file was not their, i traversed throught various top and many folders are not their in product tops, even if folder is their files are not their, is their any way i can create driver files now. This is same for $AD_TOP, or $ABM_TOP or $FND_TOP.Please post the complete error message and the patch number.
    I am on 11.5.10.2 on solaris 10 with 10.2.0.3 db. Patch can be anyone. Basically under product_top/admin of application tier template,driver folder is missing, id their any way these files can be generated?How do you know that the file/directory is missing? Have you compared it with some other instance?
    Thanks,
    Hussein

  • In an Excel template file, can I set the Folder Path in the SaveAs Dialog box?

    I have an Excel template file (xltm) and, with help from the forum, I now have a Workbook_BeforeSave subroutine to save the template as a macro enabled file (xlsm).  I’m so thankful for that help from Edward in the forum.
    I also want to set the default folder location to save the file. I really only need it when the template is saved as a new xlsm file, because if they open the xlsm file, it’s usually opened from the default folder path so any save would normally go back
    to where the file was opened.  However, with a template (even if the template is in the default folder) the Saved template reverts back to the user’s documents folder.
    Is there a good way to do this?
    I tried to modify the Workbook_BeforeSave code like this:
    Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
    Dim FolderDir As String
    Dim FileNameVal As String
    FolderDir = "Z:\save\data\place\"
    If SaveAsUI Then
    If Dir(WorkBookFolder, vbDirectory) <> "" Then
    Application.DefaultFilePath = WorkBookFolder
    End If
    FileNameVal = Application.GetSaveAsFilename(, "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Cancel = True
    If FileNameVal = "False" Then 'User pressed cancel
    Exit Sub
    End If
    ThisWorkbook.SaveAs Filename:=FileNameVal & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
    Application.EnableEvents = True
    End If
    End Sub
    But there are a lot of checks that would need to be done.
    I'm not sure how to only default the folder saved only when they open the template, but not change it when they just open an already saved Excel file created by the template (with all the active content, macros, etc.).
    Alan Edwards

    Hi Alan,
    store the path\filename in the 1st argument:
    FileNameVal = Application.GetSaveAsFilename("C:\*.xlsm", "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Andreas.

  • Pages '09 .template files cannot be opened in pages 5

    I have an older iMac and just bought a new Macbook. I have been having problems (seems like I'm not the only one) with the new Pages. Mostly, even on my iMac, I've had problems opening files. I always get an error that says, "'X file' can't be opened". Somehow I got to some of my older files, I think by converting them to .docx files. Now, I've purchased some resume templates that came in different formats. I can open the .docx files but the formatting gets screwed up. They came with pages .template files (that I assume were created in Pages '09) that I cannot open.
    Do I have any options besides trying to redo all of the formatting (defeating the purpose of buying templates) in Pages 5 which is a ****** application with ****** formatting tools?
    Can I get Pages '09 back
    Can Apple please stop trying to oversimplify things to the point of making them useless?
    Apple has really dropped the ball with this one. My frustration with pages alone is almost enough to make me wish I had purchased a different laptop. Microsoft Word '98 was a better word processor.
    Thanks,
    Jared
    P.S. the text editor in this forum is better than Pages 5

    We largely agree and have been recommending users stick with Pages '09 until a third party replaces Pages with something like Serif's Affinity Publisher next year.
    If you migrated your Mac over from the old one it should have transferred Pages '09.
    Can you reinstall from original installers? Just make sure to update iWork '09 to v4.3.
    Peter
    PS Go to the App Store and add your rating review to the mounting displeasure. Where I am the vast majority is giving it one or two stars. ie We hate it.

  • I received a gift card and when I redeemed it an error message said that I had some itunes files missing and that I needed to reinstall itunes.  Will I still have all my credits when I download itunes?

    I received an online gift card for Father's Day.  When I tried to redeem the gift then I received a error message saying I had some itune files missing and I needed to reinstall/download itunes.  Will I still have my previous purchase credits after downloading and reistalling itunes? 

    You will, because the credited funds are on your iTunes account, not the application. When you reinstall iTunes just configure it with your old iTunes account and your credits will be there waiting for you.

  • New itunes update, now itunes wont open keeps saying files missing

    doiwnloaded new update, now itunes wont open saying files missing. help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Links to MS Office template files (dotx, potx, xltx, ...)

    Hi every one,
    I'm using Acrobat Pro 7 for an interactive Project Handbook. Meaning there're are steps to acomplish in order to set up and manag a project according to certain guide lines.
    With this handbook I provide an overwiev of the whole document from where
    each chapter and
    each document that has to be filled for project management
    can be reached. To do this I'm using the linking tool of Acrobat.
    I couldn't find any post in this forum that looks like my problem so I opened a new post.
    Problem description:
    As long as I link PDFs together every thing is fine. But as I'm providing Word and Excel template files, thing get messy.
    When linking from a PDF to, lets say a *.dotx (Word template), the link works. But in stead of creating a new "Untitled.doc" from the template, it opens the template to be modified.
    Use case:
    The file "MyTemplate.dotx" is in a sub-directory where the "Overview.pdf" is in. When double clicking in Windows explorer on "MyTemplate.dotx" an new "Untitled.docx" is created.
    When linking from "Overview.pdf" to "MyTemplate.dotx" and using that link, "MyTemplate.dotx" is opened the same way as if a right-click and choosing "Open" under Windows explorer was performed.
    Workaround:
    In order to have an "Untitled.docx" generated from the template I don't link to the template any more. Instead I use a batch file with the following command:
    [start "" "directory\directory\MyTemplate.dotx" exit].
    This command is written in a "Workaround.bat" file to whitch the Overview.pfd is linked to.
    With this solution, the template opens as a new "Untitled.docx" and it's fine.
    New Problem:
    Using a batch file is detected as a thread on certain PCs. When a link to a *.bat file is used on such a PC, a dialog box "Security warning" shows up saying "Un allowed link with file:/path/folder/..../Workaround.bat" leaving only 2 choices: clicking on Help or on OK and not being able to launch the batch.
    Final Question:
    How to tell Acrobat to create a new document from a template fil *.dotx" and not open it to edit the template?
    I want to thank you for your precious help, I'm really stuck at this point.

    Here is how to completely remove Office for Mac 2011:
    http://support.microsoft.com/kb/2398768

  • Error accessing file template file not found (error code 2)

    We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
    When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
    I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
    When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
    Any help would be appreciated.
    Thanks

    We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
    When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
    I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
    When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
    Any help would be appreciated.
    Thanks

  • My iPOD comes up with 13019 error message file missing please help!

    My iPOD Nano will not sync and comes up with an error message 13019 file missing can you pelase help?

    Try rebuilding your iTunes Library:
    (This will cause all devices to see your library as a "new" library)
    1. Open iTunes.
    2. File>LIbrary>Organize Library: Consolidate Files.
    -This process may take some time.
    3. Quit iTunes.
    4. Browse to your iTunes Folder.
    5. Drag the files to the desktop, but leave the folders in place (folders will be iTunes Media, Album Artwork, Previous iTunes Libraries)
    6. Open iTunes.
    7. File>Library>Import Playlist.
    8. Direct iTunes to import the "iTunes Library.xml" that is sitting on your desktop.
    9. Once the process is complete attempt to resync your iPod.
    EE

  • How can I set Metronome to be OFF by default, besides creating a template file?

    Default setting for the Metronome was always OFF until I upgraded to iLife '11.
    From an archived thread on this topic, I was reminded of the technique of creating a template file to open with instead of "Create a New File", but that's a hassle to remember and find. And you have to remember to "Save as..." as soon as you get started.

    The Metronome is on every time I open any of my previous files, even after I turn it off. The next time I open the file, it's on again.  Impossible to stop that?
    If the answer is "no", then this is a BUG in this version of GarageBand.  Can't Apple developers correct that and issue an update?

Maybe you are looking for