Template for CD jewelcase?

I'm trying out Pages 08 and liking it, but I need to find a template for printing CD jewelcases. Anyone know of any out there?

When you say original iWork disk, do you mean '06? If so, I can't find templates on it. Do I need to re-install iWork '06 to get them?
As for '08, I downloaded the trial so I don't have a disk for that, and there's no CD template that I can find in the templates included with that.

Similar Messages

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

Fix Cheque position in RTF Templates for AP Payments R12

Hi,
I created rtf template for check printing. I have to print invoices details first and after that check at the bottom of the page. I need to print invoices on the cheque page only when total invoice count < = 3 which I am able to control. I am facing issue when for 3 invoices the table height is variable, depends on invoice description this table size is changing. How I can give the fixed-height for invoice table or how I can specify exact place for check (at the bottom of each page )
Thanks
Mital

Hi Prakhar,
Please note the cheque is not an image its in a table.
Even if I fix a table using table positioning in the output it doesnot print at the fixed position which I have provided in my RTF.
Please let me know if you would want to see the sample XML Data and RTF that I have created which can be easier to debug.
Thanks for your help,
Mital

Help with trying to locate Illustrator templates for CS version 1

I'm trying to locate a copy of the templates that were issued as part of Illustrator CS version 1. Specifically, I'm looking for a file by the name of "flyer3.ait". I would, ideally, like to access all of the templates for CS, version 1, because I am reading the Adobe Illustrator CS, Idea Kit book by Jerome Holder & Barbara Mulligan. and they use these templates as starter files for their book. Thank you in advance.

I really doubt that you are going to find them unless someone has a version of CS1 installed somewhere on an old machine. In the newer versions the template files are in a folder called Cool Extras which may or may not have been installed. Installation of this folder was an option in the newer versions. In AICS3, there is a template called flyer.ait in the above folder.

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Creating your own theme-templates for printing?

Can I create my own theme-templates for printing?
/BonneSwe

No, iTunes printing is quite simple and only works off it's own templates. If you want to customise templates you'd be better advised to look at on of the specialised cover printing programs that are available. DiskLabel is one that springs to mind.

User Interface Template for Interactive Report Region

In 3.2, where do we set the user interface template for Interactive Reports region?
No matter what out of the box theme I switch to, the Interactive Reports region shows the same. What and where do I change the template so that alternating rows use two different colors?

There is no template for Interactive Reports like for a "normal" report. You need to modify the CSS and supply your own for this to happen.
I believe most things are tagged with #apexir - firebug with Firebox is invaluable. This thread may help:
Re: changing the look and feel of interactive report.

#REGION_STATIC_ID# does not work in report template for PPR

I was hoping to use the new substitution string #REGION_STATIC_ID# for a PPR report, because when we do Export/Import of the app the Region ID changes and we have to manually change the Pager Header Javascript to get the PPR to work. A real pain.
So I changed the Region template to use #REGION_STATIC_ID# and set the Static id in the region definition - this worked fine. Next, I modified the Report template for PPR to use #REGION_STATIC_ID#, but at runtime this resolves to a blank! I assumed it would pick up the static ID for the region it was in. Is this a bug or am I just not understanding the way it is supposed to work?
Regards,
Steve

Hello,
#REGION_STATIC_ID# is available in some places in the report template. But the PPR javascript uses the APEX engine created ID get into the fast track report engine so it's not going to work that way.
But you can still do what you want to do what you want to do. Use the #REGION_STATIC_ID# in your region say something like this #REGION_STATIC_ID#_body the use the javascript to get that element and then use that element
along with getElementsByClass(searchClass,node,tag)
http://apex.oracle.com/pls/otn/f?p=38704:2:::NO::P2_ID1:22
to grab the report table and then it's ID which you can then feed into your javascript. It will only be 2-3 more lines of javascript.
Carl

How to change the default print template for broadcast PDF Export

Hi,
I have currently designed a print template for printing purposes and use this as the template for the print button(Export to PDF),if i were to click on this button the output pdf is the desired PDF. But if i were to broadcast the template with output format as PDF it picks the layout of the current template, how do i set broadcast to pick up the print template also???
Further how to insert a page break in a PDF print template.

Hi Nagesh,
These setting are for
1.Adhoc Template for Queries
2. Adhoc Template for reports designed through report designer
3. Template for query precalculation
4. Template for displaying broadcasting wizard.
When we use broadcasting from query designer to email PDF's the system uses 0QUERY_TEMPLATE_BROADCAST_PDF.
From WAD the system uses the current template layout as PDF Layout.
P.S: OSS note 1054460 -<b>Depending on the BI object type and possibly other criteria, different Web templates are used in BI broadcasting to generate PDF (and PS or PCL) formats:</b>
<i>For Web templates: the Web template itself is used</i>

New RTF Template for Quote Print

Hi,
Oracle has provided only XSL Template for Quote Printing. Since Client needs his own format of Quote Printing, Can we create a new Customized RTF template for Quote Printing? or Is there any easy way to do customize the XSL Template?
Pls advise..
Thanks in advance,
Regards,
Muru
Message was edited by:
Muru

Hi Miru,
I need ur help.I am working on the same customization of xsl template.can u please guide me through how to work with this.
I need to customize print quote report
Can u please tell me the link/steps how to customize the jsp form to replace the standard CP with custom one
Secondaly,which one option is better ,creating a new rtf/modifying the existing xsl
and how ?as i dont have any idea about xsl.but i know creatig rtf's
Please guide me thru.
Thanks a ton in advance
kaur

Template for CD jewelcase?

Similar Messages

Maybe you are looking for