Template for termination of a rental agreement

i am looking for a template for a early termination for a rental agreement

Search for a Word template and open that in Pages.
Peter

Similar Messages

Standard smartforms for SD-Notification, Service order, Rental agreement

Hello all,
Could anyone let me know if any standard SMARTFORMS
available for
Notification - SD
Service order - SD
Rental Agreements - SD
Reminder for order confirmation - MM
Goods issue - MM
Physical inventory slips - MM
Spare part labels - MM
Is there any SAPnotes available for this.
Awaiting your reply,
Thanks,
Balaji

Standard Smartforms
PO ---> /SMB40/MMPO_L
Request For Quotation ---> /SMB40/SDINQ_L
Invoice ---> /SMB40/SDINV_L
Delivery Note ---> /SMB40/SDDLN_L
Sales Quotation ---> /SMB40/SDQUO_L
/SMB40/SDPIK_L                 Picking List
/SMB40/SDSDA_L                 Scheduling Agreement
/SMB40/SDDLN_L                 Delivery Note
/SMB40/FIDUN_L                 ACC-FI-Dunning
/SMB40/MMCON_L                 Contract/Scheduleing Agreeme
/SMB40/MMDLS_L                 Delivery Schedule
/SMB40/MMGI1_L                 Goods Issue slip version 1
/SMB40/MMGI2_L                 Goods Issue slip version 2
/SMB40/MMGI3_L                 Goods Issue Slip version 3
/SMB40/MMGR1_L                 Goods receipt slip version 1
/SMB40/MMGR2_L                 Goods receipt slip version 2
/SMB40/MMGR3_L                 Goods receipt slip version 3
/SMB40/SDCSH_L                 Cash Sales

Looking for template for rent receipts

I have several rental properties. I am looking for a Numbers Template that would be very basic, but would allow me to keep track of the date, and method of payment on a page for each property. Has anyone seen anything like this?
Gwen Bentley
<Email Edited by Host>

Hi Gwen,
If you can't find a suitable template with a web search, here is a quick draft done in Numbers that might suit.
Based on weekly payment of rent for one rental property.
Column A formatted as Date and Time but displaying only the Date component.
Cell A2 contains the starting date of the rental agreement.
Cell A3 contains the formula =A2+7 to increment the due date by 7 days. Fill Down.
Body Cells in Columns B, C, D formatted as Currency (2 decimal places).
Column B is the weekly rent. On 22 July the rent went up (highlighted in blue).
Cell D2 contains the formula =C2-B2
Cell D3 contains the formula =C3-B3+D2. Fill Down
Conditional formatting can reveal a negative balance as red text (or you can manually format it as red).
Body Cells in Column E are formatted as Pop-Ups:
First Pop-Up item is a space (to appear blank).
When you get one Table working as you want, Menu > File > Save as Template. Then add a blank Table for each rental property. Each Table can be on a separate Sheet for ease of printing.
Regards,
Ian.

Where is the VM Templates for Oracle IdM 10g R2 ???

Guys,
Oracle says to donwload VM Templates for Oracle Identity Management 10g R2 from the following site.
http://www.oracle.com/technetwork/server-storage/vm/idm-085976.html
It has also give the E-delivery instruction:
Oracle E-Delivery Instructions:
Visit http://edelivery.oracle.com/oraclevm
Complete your registration information (Name, Company Name, Email Address and Country) and click on the download agreement
Select "Oracle VM Templates" from the "Select a Product Pack" pull-down menu
Select "x86 32-bit" from the "Platform" pull-down menu
Click "Go" and then select from the list of Oracle VM Templates
Download and unzip the files and read the readme
But actually the template doesn't exist in E-delivery.
Please advise.
Thanks

yes, they removed it without updating the page at http://www.oracle.com/technetwork/server-storage/vm/idm-085976.html

Standard template for HR process

Hi ,
Please help me to identify the Standard workflow templates for the following process.
1) Newhire onboard
2) Termination
3) Special payment
4) Leave of absence
5) Transfer process
Help will be rewarded.
Richard

Check if these are what u were looking for
Regards,
Anuj Sethi
> 1) Newhire onboard
Check the package for more templates
WS 00400019     Create + send letter
WS 00400020     Create letter
> 2) Termination :
Sorry !! Can`t help u on this one !!
> 3) Special payment
Check Package: PCMP
> 4) Leave of absence
Check Pkg: PBAS
Some Templates are :
WS 00400077     Absence approval (asynchr. unlock)
WS 00400222     Approve absence (sychr.unlock)
> 5) Transfer process
WS 01200145     Transfer
>
> Help will be rewarded.
>
> Richard
Message was edited by:
        Anuj Sethi

Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M

Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AM

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Using NTSC 720 X 480 Templates for HD 1440 X 1080

Okay so I'd like to use an NTSC template for an HD project. Is there any way of doing this? I have Motion 3 and it only offers SD versions of the template I want to use.
Is there a way to convert a 720 X 480 template to HD 1440 X 1080 ?
Message was edited by: polarbearski

Thanks for the reply TCY. I can't confirm whether your instructions are correct or not. I decided to outsource this project and ended up finding a guy who has agreed to create the slides for me for just $150. Can't beat that. (I'm a producer not a post production guy.) Hopefully someone will be able to make use of your advice at a later time.
Best Regards,
Polarbearski

LabVIEW license for terminal servers and thin clients (e.g. LTSP)

Does NI plan to provide a license agreement for terminal servers and thin
clients?
I've been told to purchase a multi-seat license. That doesn't make much
sense since the thin clients won't be accessing DAQ hardware. They're
just used for developing the LV source.
Comments/suggestions?

On Thu, 04 Nov 2004 13:43:58 -0600, jbrohan wrote:
> As far as I know it's the capability to edit the source code that NI has
Yes, this is a very good point. Quite a unique situation when compared to
text based languages. Keep in mind I certainly don't mind paying for that
but I see no need to pay for much of the other features - like running it.
This is certainly one of the other features you pay for with LV. Since
we never plan to run the app on the thin client, why pay for that
feature?
What we do is crank out source code on the thin clients. We then send the
source code to this wireless mobile DAQ station running WindowsXP. From
there we can roll it up to our clients' target systems. That machine is
used for debugging then compilin
g so it has its own LV Prof Dev license
installed on it. Also, it can be operated locally or remotely via remote
desktop (one user at a time).
I know it may sound strange but it works great. And as the NI Software
License Agreement(NISLA) specifies, we have separate licenses on all
machines that load LV into local memory. The thin clients load nothing
into local memory, hence no need for a separate license.
> I express myself clearly in the hope of guidance. I am a one man shop
Yes, this is understandable. Installing one license on multiple machines
is a big no-no. However, that is not what I'm trying to do. Take a peek
at the "Grant of License" and "Single Seat License" sections of the NISLA.
> You say "That doesn't make much sense since ..." One of my clients has a
Ha! How about this scenario: As wireless hardware (bluetooth, wifi)
becomes more common, perhaps NI will have a peer scanner on all PCs with
LV installed. That way if you get within 100 feet of a P
C with the same
LV serial number, you get locked out and it sends a small message to the
NI batcave.
Thanks for the response. I'm hoping NI chimes in soon.

Where to download PeopleSoft Change Assistant Template for Upgrade ?

Folks,
Hello. I am upgrading PeopleTools 8.49 to 8.50.
After configure Change Assistant 8.50, we need to download a specific Change Assistant template for upgrade process. I cannot find where to download it.
Can any folks provide a link to download PeopleSoft Change Assistant template for upgrade PeopleTools 8.49 to 8.50 ?
Thanks.

Hi,
You have to be a customer with a current maintenance agreement to have valid access to My Oracle Support (http://support.oracle.com) and the upgrade documentation and templates.
Current customers who share documents and information from My Oracle Support with non maintenance customers, and others, may be in breach of their license agreement with Oracle.
For reference:
"... This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast,modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by anymeans. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited"
regards
Greg

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

Template for termination of a rental agreement

Similar Messages

Maybe you are looking for