Template for Test Scripts in running process chain

Hello all,
I am in urgent need of Test script Template...if any have that pls send one template.I will modify accordingly...
Thanks a lot in advance
my mail id [email protected]
-Venkat

Take a look at this link,not sure what you meant by test scripts...
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm

Similar Messages

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

Attr changes runs for all Infoobject in a process chain

Hi,
I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
How can I carry out the structural changes for all InfoObject in a process chain?
Thanks!

yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
I don´t know what I do?
This process actives all my ATTR and HIER in my chain???
Message was edited by: Victoria León

Run process chain on last three days of the month

Hello
I need to run process chain on last three days of the month. For example , It should run on 28, 29 and 30th dates of June.
There is no option to put a code in the start process of the process chain.
I can run it every day and put a code in the infopackage/DTP so that empty load (0 records) will be done on other days.
This doesnt sound as a good option.
Do u know any other options?

Hi
See the code and details how to do it, and change the code as per your requirement.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842
Thanks
Reddy

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

Is it possible to run process chain from the certain process/point?

Hello
Is it possible to run process chain from the certain process?
How?
Thanks

Hello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala

Error running process chain

Hi,
wehn we run process chain , the result from optimizer log showing error indicator , we check the abap run time using ST22 and discovered the message
DBIF_DSQL2_SQL_ERROR
what the message try to tell us , how to troubleshoot it .?
thanks

Hi AF,
try to look on SAP notes 978417 - Latch Monitor and Table Access Monitor: DBIF_DSQL2_SQL_ERROR. I guess this will solve your problem. It states also here on how you fix the issue.
Let me know if this make sense. Have a nice day!
Regards,
SASJr

AJAX truclient for IE, script cannot run in load mode

I have LR 11.5 Ajax truclient for IE script which runs fine in script mode. In load mode the script starts but remains showing the status 'running'. In the task manager, it shows that the TruClient for IE Browser task is not responding.
I have already added in the HIPS file to make exclusions for :
C:\HP Loadrunner\bin\LrWebIELauncher.exe
C:\HP Loadrunner\bin\Vugen.exe
C:\HP Loadrunner\bin\wlrun.exe
C:\HP Loadrunner\bin\mdrv.exe
C:\HP Loadrunner\bin\HP.Utt.StandaloneDebugger.exe
Any suggestions how to fix this. Thanks

Hi,
To trap error message from Forte log, I usually do this
egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
This takes a regular expression to 'egrep' all occurrences of "exception" or
"error" not matter they are in upper case or lower case.
Hope this help.
Regards,
Peter Sham.
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Wednesday, March 17, 1999 12:58 AM
To: Forte-Users (Adresse de messagerie)
Subject: Reporting after many forte tasks run in
batch mode ?
Hi,
I would like to know if overnight builds went okay, and
therefore need to parse the log(s).
The issue is that I don't have a proper string to look for
(i.e. for grep).
If I consider 'ERROR", then the following message won't be
understandable.
There might a way to cheat with the indentation (i.e. the
lines with only two first blank chars)..
Has anyone experimented such a need ?
J-Paul Gabrielli
DTS
SYSTEM ERROR: Service object
MySuperApplicationServer.MySuperMgrSO has
not been partitioned. Therefore, you cannot move it to an
existing partition.
Class: qqsp_UsageException
Error #: [1602, 606]
Detected at: qqcf_StandardConfig::MoveServiceObject at 3
Error Time: Tue Mar 16 17:39:26
Exception occurred (locally) on partition
"Fscript_cl9_Client",
(partitionId =
B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
[B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
application
"fscript", pid 22713 on node rambo in environment
SuperEnv.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Long running Process chain for less Number of records

Hello Experts,
I have a problem with a process chain which is taking very long time ( To load around 20 records)
Problem Description:
1) I have one base ODS and First level ODS and the data uo to this point is loaded with out any problem.
2) When the data is moving from First level ODS to the Cube to load 20 records it is taking around 5 hrs of time and the load is successful.
3) If I see the DTP monitor the exraction step from DSO to Cube is taking around 4.50 min
4) The remaining stpes are like Error handling, transformations, updation are taking normal times (Around 5 secs).
Could any one please help me to find out where the exact problem lies to make this extraction step so long time.
Regards,

Please check for start routines, field level routines. From DSO to Cube check for transformation. How each and every field is getting updated and you will be able to track the time taken for the load.
thanks,

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

Scripts, Packages and Process Chains

All,
Is the best practice to create each individual process chain for each script logic file or create one and use it for all the scripts? If I execute 2 scripts at the same time, will I encounter any locking issue?
Let's say I have Script1.LGF and Script2.LGF to perform to different activities. If I link it using the same process chain with Run logic, will the Script2.LGF execution file if Script1.LGF executes?
Thanks for your inputs.

Hi,
Yes I agree. Too many process chains would add to your maintenance. You could have once process chain and modify the dynamic script of each package you create in a such a way that they run the logic assigned to them.
If you are running the packages that are writing the same data region, you would come across concurrency data locks.
You could also check the usage of package links in your case, as you could group the packages to run one after another. (Example: Import the data from a flat file, Run the currency conversion and Run the lite optimizatio etc.) This is just an example, you could have your DM packages in the sequence driven by your business
Thanks

Long running process chains - No Dump / error message.

Hello,
We have defined some steps in process chain that contains default macros. We mainly included that to ensure calculations happens even when users dont open or access the DP Planning book.
Issue is, these steps are running endless. normally it takes some 400 n odd seconds. But its running for the last 60000 secs.
No. of Planning objects or CVC is 2027 only. I had to cancel them and tried to re run this step or the whole chain no luck....
I have checked active jobs in SM37, there is none. So ideally there is no load on the system. Also no change to Macro or CVC's has been done. there was only one Transport that was moved and it was on the product master.
Also I have done the time series, Live cache, PA Consistency checks. only in Live Cache there was some Superflous time series and it was corrected.
I am not getting a clue of why its happening nor where to start the analsysis.
Any help or suggestion is greatly appreciated.
Currently I have made the subsequent events as independent,& the chain is running execpting this step.
Many Thanks
Aswath Ram.

Thanks for the reply,
These are custom macros. It adds two KF and copies to another.
The no. of periods is 24 time periods and roughly no. of CVC is 2100.
Another thing, this process chain has been running for last 5 to 6 months with no issues. Since sunday, its messing up....
I am doubting if its taking time read data from table or live cache. or is it because of some indexing. Not sure how to check that.
have asked Basis to check the system performance, if it might cause this issue.
Many Thanks
Aswath

To find the Person who run Process Chain lastly

Dear All,
How can I find the last person who has run the process chain? is there any table or program?
Best answer receives reward points.
Cheers,

Hello,
Last Modification
You can see that information in RSPC, enter in the chain that you want to see who was the last modification user, and there is a button that shows that information.
All Modifications
Or you can see the log in RSPC and see the modifications done to the a chain.
SUIM
SUIM is a powerful tool that comes in quite handy for the IT when working with roles and authorizations.
It will not deliver the last modification user of a process chain, for sure.
Regards,
Jorge Diogo

Template for Test Scripts in running process chain

Similar Messages

Maybe you are looking for