Template for workouts or running?

Before I attempt to create my own spreadsheet to track running I thought I'd ask if anyone had created something already and would be willing to share.
Thanks in advance for any help. Otherwise, I'll get busy myself
Dave

you could check numberstemplates.com If you ask on their forums, someone else might have something or will assist in making one.
One thing you should do is look every article and question ou can find on here dealing with time calculations. It seems to work different than in other spreadsheets.
Hope this gives you a lead into getting it done.
Jason

Similar Messages

Which CTC template needs to be run for Bex Reporting Designer

Hi,
In our BW system I do not see any "Bex Web reporting Designer",.
Which CTC Template I do need to rung to in istall Bex Web Reporting Designer"
Thanks for help
sahmad

Hi,
To ensure BI Java is configured correctly and completely, please do the following:
1. Always use the CTC Template for BI Java for configuration (check SAP NetWeaver 2004s Masterguide available at http:/service.sap.com/instguides for details). Manual configuration or configuration via report RSPOR_SETUP should not be done for SAP NetWeaver 2004s.
2. To ensure a smooth configuration process, make sure that you have deployed the very latest patch from SAP Service Marketplace at http://service.sap.com/swdc for CTC Template for BI Java.
3. To avoid encountering already known issues within the area of BI Java itself, make sure to deploy the latest patches for SCAs BI-BASE-S and BIWEBAPP.
4. Read note 983156 ('BI configuration w. Template Installer') and ake sure the necessary prerequisites are given on the ABAP side. Ensure that you have installed the latest LM Tools.
5. After running the CTC Template for BI Java, run SAP NetWeaver BI Diagnostics & Support Desk Tool as described in note 937697 to verify your installation. In the "Advanced mode" of the tool, go to the "Configuration checks" tab and check for potential red traffic lights. To resolve the issues shown there, check the "Remedy" column and follow the instructions given there.
6. The overall process is described in more detail in note 917950 ('SAP NetWeaver 2004s: Setting up BEx Web'). Make sure to go through the note and also have a look at the document WDEBU7_Setting_up_BEx_Web.zip attached to that note, showing the overall process in a set of slides with screenshots.
Kind Regards,
Marcio

Template for physical workout log?

I'm trying to find a template for a log of my workouts at a gym. The template could be for Pages, Numbers, Appleworks, Word, or Excel. I use equipment at Gold's gym, but the only template they have available is a photocopy that must be filled in by hand. I want something that I can fill in and update as necessary on my computer. A Google search has not been productive - too many unrelated results. Thanks.

I notice you've posted this question in the AppleWorks, Numbers '09 and Pages '09 forums.
Rather than scatter responses over three forums, I'd suggest putting them all in one. My own feeling is that Numbers is likely the best application for this task, so I've placed my initial reply in the Numbers '09 forum.
The link will take you to the thread.
Regards,
Barry

Do I need to recalibrate for a walk-run-walk workout?

My nano is calibrated for walking but as I build endurance I want to incorporate a little running too. Do I need to recalibrate my nano, doing a walk-run pace? Do I set it for walking or running calibration? Thanks.

I have calibrated for both. It allows you to choose which one you are doing. The following is from the manual:
Calibrating Nike + iPod
Nike + iPod is quite accurate for most users. You can improve the accuracy by
calibrating Nike + iPod to your natural running and walking styles.
To calibrate Nike + iPod for running and walking:
1Choose Nike+iPod > Settings > Sensor > Calibrate and press the Center button.
2Choose Run and choose a distance.
3Press the Center button and run the set distance at a steady, natural pace.
4Press the Menu button and choose Done Calibrating. A message tells you if the
calibration was successful.
5Repeat steps 1–4, choosing Walk in step 2 and walking at a steady, natural pace in
step 3.
Note: Even after calibrating, the accuracy of the distance measurements may vary
depending on gait, running surface, incline, or temperature.

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Creating Parameters in RTF Template for BI Publisher Report

hi,
I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parameters in RTF Template for BI Publisher Report ? I am not finding option. Please let me know .
Thanks in advance
Gayathri.

all the parameter's value will be there in your xml .
just you need to add parameter heading and corresponding xml tag name to get the parameter value on the report.
if u dont have you can try like below
https://blogs.oracle.com/xmlpublisher/entry/get_your_parameters_here_guv
Declare Parameter in RTF Template
Before you use the parameter in the RTF template file you need to declare it first. You can do so by having the following syntax.
<?param@begin:%parameter_name%?>
Note: where %parameter_name% is the parameter name that you have created at the BI Publisher Server UI.
Here is an example:
<?param@begin:param1?>
Use it in RTF Template!
Once it’s declared in the RTF template you can start using it as the same way you use the variable. You need to just add ‘$’ prefix in front of the parameter name. Here is the example:
<?$param1?>
The above example would print the parameter value in the report output. If you want to use this value in your condition or calculation you can simply use it as ‘$param1’. Yes, it’s that simple.
If you are not sure if and how the parameter values are passed to the report when you run the report you can use this command in your RTF template, which will return all the parameter values passed to the RTF template at the runtime.
<?xdoxslt:getXDOProperties($_XDOCTX)?>
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html

Crystal Report Templates for User-Defined Objects

Hello Experts,
I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
Any help would be appreciated.
Thanks,
Praneeth

If this is still a problem please re-post to the SAP Integration Kit forum.

How to use myself JSP template for my projects

I am using JDev 10. .I realized the default templates of JSP in JDev don't match with my projects so I want to create my own template for JSP Pages. I read some threads in Forum about this problem but I am a beginner, I cannot understand fully and don't know the way to create template nor adding it into Project. Someone can tell me where I can find the tutorials, examples(demo).
Thank you very much.

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

500 Internal server error in web template for specific users

Hi We have issue with Web templates for some of the users giving error "500 internal Server Error", all other users able to run the same report.
We have authorization for the user and following variable which will give target currency selection in variable screen.
SAP BI Environment
BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info: - Production mode: true BI JAVA SPS : 7, Patch : 0
BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info: - Production mode: true
Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
Operating System : Windows 2003 - amd64 - 5.2
Error Message :
ERROR: Specify a value for variable Select Target Currency
ERROR: Specify a value for variable Select Target Currency
Root Cause :
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
please let me know if any of you guys had this kind of problem.

SLD is not down its in active , I checked SLD url and Technical system also
Its in active , but when the problem is happend they done restart
but many times its happening every time restart is not preferrable ,upto that one is production system.
SLD is in active , but why the JCO'S ARE DISABLE under content Admin
where we can search the SLD user , we checked in SU01 but the user didn't exist there
If user is lock in the sense after the restart again it's working fine
I want to know the Root cause , why bcz it's simultaniously happend.
Regards,
SONY

Creation of Web Template for SAP R/3 Transaction

Hi ,
    How can i create my Web Template for SAP R/3
    transaction for publishing in ITS ?
    I have created my own Z transaction of
   (Module Pool ), <b> How can i create Template & run
   it through web .     </b>
Regards
Sachin S M

Go to transaction SE80
choose internet service option.
enter a name for the service and hit enter, the system will prompt with a message that the service is not available do you want to create clik yes.
choose the radiobutton screen based application and enter the transaction code and hit enter.
once the service is created, right click on the service name and click create Template, enter the program name (it will be defaulted from the transaction) screen number and hit save.
once created you have to activate it and publish it to ITS server.
Which version of SAP are you using? you can show your transaction on the web using ITS without creating template also.
Regards
Raja

How to create custom template for webcenter portal application

Hi,
I created webcenter portal application in my jdev using the webcenter portal application template provided by the webcenter framework.
I tried to create custom template for my application by following steps:
1. Created new application using webcenter portal application template with all default package structure.
2. Right click pagetemplates folder under webcontent package and select new option.
3. New gallery opens up.
4. Selected JSF under webtier and JSF Page Template under items in the right hand side and clicked Ok button.
5. New wizard opens up for creating new JSF page template.
6. Gave template name(file name) and Page Template Name(template def name).
7. Selected checkbox staing start a Quick Start Layout and selected three column layout and selected Ok.
8. Selected checkbox for Create Associated ADFm Page Defination(so that page templates can be changes at run time).
9. Created some Facet Definations (header, footer, content1, content2, LHN, RHN).
10. Clicked Ok button which will create custom template.
11. Added some Panel Group Layout component from Component Palette.
12. Created new page (.jspx) with this template.
Now when I try to add producer portlets created using Producer Portlet application template and connected to the above application using WSRP2.0, I'm facing problem.
The prolem is that I'm not able to add more than one portlet in one single page?
Kindly let me know whether the steps followed by me is wrong some where and needs to corrected and let me know how I can add more than one portlet to page?
Basically I cant see more than one placeholders in my page to add portlets.

Thanks Yannick.
In the step 9 I had mentioned that I created various facet definations (header, footer, content, content1 RHN and LHN).
Is this is not facet you are talking about or should I drop facet ref from the resource palette?
Can't I add moer than one portlet to my page at design time itself?
Annoying since in weblogic portal we do this at design time(.portal).

PDF Template for XML Report

We are trying to create a PDF Template for an XML Publisher Report using Adobe Acrobat Profession Version. The PDF Template works fine for one employee but when the start and end body tags are inserted in the template, the concurrent process to submit this reports completes in warning.
The OPP Log shows the below details
[6/30/08 1:26:36 PM] [102436:RT20660155] XML Publisher post-processing action complete.
[6/30/08 1:26:36 PM] [102436:RT20660155] Completed post-processing actions for request 20660155.
[6/30/08 2:29:59 PM] [OPPServiceThread0] Post-processing request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Executing post-processing actions for request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Starting XML Publisher post-processing action.
[6/30/08 2:29:59 PM] [102436:RT20660180]
Template code: Test123
Template app: XBOL
Language: en
Territory: US
Output type: PDF
[6/30/08 2:29:59 PM] [UNEXPECTED] [102436:RT20660180] oracle.apps.fnd.cp.opp.PostProcessorException: XML Publisher output file not created
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:281)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
I think this is do which how i am creating the PDF Template. When i am not inserting the repearting group tootips then the PDF Template works abosoultey fine for one employee
the text inserted in the Toottip for the start of the repeating group - @{rep_field="BODY_START"}@
Tootip for each repeating row @{rep_field="T1_G1"}@ ,@{rep_field="T1_G2"}@ and so on.
Tootip for end of the repating group @{rep_field="BODY_END"}@

XML Data
<?xml version="1.0"?>

<MODULE1>
<LIST_G_HGL>
<G_HGL>
<EMPLOYER>HWS</EMPLOYER>
<BOX_1>YEN</BOX_1>
</G_HGL>
<G_HGL>
<EMPLOYER>HGL</EMPLOYER>
<BOX_1>YE</BOX_1>
</G_HGL>
</LIST_G_HGL>
</MODULE1>
Further when i tried using the Template Viewer of XML Publisher Desktop with the above XML File and the template i created in Adobe Acrobat Professional (i am mailing the template to [email protected]) , i got the following error
[070808_093926007][][STATEMENT] MergerEngine.modify : template forms value is being changed......
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> Start , FieldValue ->
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> End , FieldValue ->
[070808_093926038][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> EMPLOYER , FieldValue -> HGL
[070808_093926054][][STATEMENT] MergerEngine.modify : template forms value is changed......
[070808_093926054][][EXCEPTION] java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
     at java.util.Vector.elementAt(Unknown Source)
     at oracle.apps.xdo.template.pdf.RepeatEngine.getGapBetweenGroups(RepeatEngine.java:449)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:154)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:101)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1742)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
[070808_093926054][][STATEMENT] <--- before calling createContents() --->
[070808_093926086][][STATEMENT] <--- before calling addFontInfoToResources() --->
[070808_093926086][][EXCEPTION] oracle.apps.xdo.template.pdf.exception.FatalException: page Key can't be found to duplicate page......
     at oracle.apps.xdo.template.pdf.RepeatEngine.getDupPageKey(RepeatEngine.java:1421)
     at oracle.apps.xdo.template.pdf.RepeatEngine.composePages(RepeatEngine.java:827)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1743)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
End of Process.
Time: 0.251 sec.
FO Formatting failed.

How to edit template for report generator in stimulus profile editor in Veristand 2011?

How to edit template for report generator in stimulus profile editor in veristand 2011?
We are using Veristand 2011.When we run any sequence in stimulus profle editor,we get test results in form of ATML file.
We want to customise the template for this test result generation as per our requirement.
For example:
Test case No.: Description of test case.
Objectives: Explanation of objectives.
Result: Passed/ Failed.
Graph: If any.
Please suggest how to do this.

You cant really change too much in the report, you can customize TRML.xsl which is created every time in the Test Results\UUT 1 folder and that would give you some flexibility on what is shown. I dont know what a xsl is actually able to do in terms of composing data from multiple files (if at all possible) but it definitely allows you to change the visual format of the existing xml data.
Otherwise I modified the xsl to customize the look of the xml report when opened in a browser to have less clutter and some coloring on the Pass/Fail but, the reports are XML files anyway so it's easy to extract data out of them and you can probably write your own report creation tool to compose the report in whatever format you like.

How to create Data Template for creation of BI Pulisher Report

Hi,
I m having all the steps for creation of BI Pulisher report using Data Template, like 1st create Data Template, Add new Data Definition, upload Data Template, Create Concurrent Program and run the request, save o/p and create rtf layout, upload Template and again run Concurrent program to view output.
All steps are working fine.. but my simple question is every time we need to write code for Data Template i.e. xml file ? is there is tool or something which will create this Data template for us using rdf? or is there any other way ?
Please guide ..
Regards,
Priyanka.

Hi;
Please see below note which could be helpful for your issue:
NOTE:367394.1 - About Oracle XML Publisher Release 5.6.2
Also see:
http://www.adivaconsulting.com/adiva-blog/item/5-datatemplate
http://apps2fusion.com/at/51-ps/262-xml-publisher-and-data-template-sql-query-to-develop-bi-publisher-reports
http://blogs.oracle.com/xmlpublisher/data_extraction/data_templates/
Regard
Helios

HTML Template for Web Dynpro (ABAP)

Hi Guys,
I am developing a webpage in webdynpro abap.
my requirement is to use a existing HTML(same as existing applications) template for this.
how do i do that ?
regards
Siddharth

You don't. That isn't how Web Dynpro works. The architecture is such that it abstracts the HTML/JavaScript rendering of the output. You place a UI element on the screen and only a metadata reprsentation of the screen is created at design time. At runtime different rendering engines can be applied to produce the final output. This allows SAP to add new rendering engines and to improve the rendering engines over time without having to adjust the applicaitons itself. This makes Web Dynpro sutiable for producing Business Transactions, but not general web pages. It also gives us the flexibility to render Web Dynpro in HTML/JavaScript, a desktop client (.Net 3.0 and WPF), and a RIA client (Adobe Flex).
You can alter the theme of the WDA application when running in HTML rendering. The theme gets automatically inherited from the NetWeaver Portal - or you can apply a stanalone theme when running without the portal. Theming allows for some basic changes of color scheme and branding elements - but is not the same as applying a complete HTML template.

Template for workouts or running?

Similar Messages

Maybe you are looking for