Template interpretation failed. Template does not exist.
Hi Gurus,
We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
Can anyone please confirm me..whether I'm right or anything need to be corrected ...
Thank you in advance.
Regards
Naren
Thanks.
Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
As per Config guide It happned after doing below steps .....
SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
Note
You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
3.1 Portal-Independent Navigation Frame and Inbox
3.1.1 Portal-Independent Navigation Frame Configuration
Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
(SAP SRM) applications without using SAP NetWeaver Portal.
Procedure
To configure the portal-independent navigation frame, proceed as follows:
1. In Customizing for SAP Supplier Relationship Management, define the following settings:
n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
Relationship Management under SRM Server Technical Basic Settings Portal-Independent
Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
the connection must end with one of the following character sequences:
l For a non-secure connection, use_HTTP.
Example: SAP_ERP_HTTP.
l For a secure connection, use _HTTPS.
Example: SAP_ERP_HTTPS.
n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
Client (NWBC) for HTML.
Thnaks
Similar Messages
-
ERROR: attribute verification of failed pathname does not exist
I tried creating a sample package with classes in it.
I am getting the below error after i tried installing my installer on SunOS.
Please help to fix this issue.
The following packages are available:
1 Appap Application Package
(sparc) 2.0
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <APPap> from </ap>
Application Package(sparc) 2.0
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <APPap> [y,n,?] y
Installing Application Package as <APPap>
## Installing part 1 of 1.
[ verifying class <none> ]
Installing app ...
[ verifying class <app> ]
ERROR: attribute verification of </opt/app/a.txt> failed
pathname does not exist
Installing hlp ...
[ verifying class <hlp> ]
ERROR: attribute verification of </opt/app/b.txt> failed
pathname does not exist
Installation of <APPap> partially failed.
My pkginfo and prototype file contents are as follows. Please let me know the solution for ERROR: attribute verification of </opt/app/b.txt> failed pathname does not exist
# cat prototype
i pkginfo
i request
i ./i.none
i ./r.none
i ./i.app
i ./r.app
i ./i.hlp
i ./r.hlp
d none /opt 0755 root root
d none /opt/app 0755 root root
f app /opt/app/a.txt 0644 root root
f hlp /opt/app/b.txt 0644 root root
# cat pkginfo
PKG=APPse
ARCH=sparc
NAME=Application Package
TZ=$TZ
VERSION=2.0
CATEGORY=application
CLASSES=none app hlp
Edited by: VinayVM on Jan 20, 2010 8:49 AMThis packages(*libgcc-3.4.6* or gcc-3.4.6) is installed on your zone? You will need to install either libgcc-3.4.6 or gcc-3.4.6 before install SMCgmp.
HTH
Michele -
Custom Web Template fails, List does not exist
Can somebody help me with this?
After I patched the SharePoint 2013 SP 1 to the April 2014 CU I've been getting this error.
When I apply a custom template I keep getting the error:
"Exception calling ApplyWebTemplate with 1 argument: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
When I check the logs I found this:
"05/15/2014 11:04:31.83 PowerShell_ISE.exe (0x285C)
0x1A2C SharePoint Foundation
Feature Infrastructure 889w
High The element of type 'ListInstance' for feature 'test5ListInstances' (id: 2acac41f-5723-4e3e-985f-35620a5696fc) threw an exception during activation: List does not exist. The page you selected contains a
list that does not exist. It may have been deleted by another user.
01b11c40-f800-0000-e439-4b6b816fcf01"
And this:
05/15/2014 11:54:56.07 PowerShell_ISE.exe (0x1E1C)
0x1DF8 SharePoint Foundation
General aix9j
High SPRequest.GetMetadataForUrl: UserPrincipalName=i:0).w|s-1-5-21-3659363940-654044839-132917978-4964, AppPrincipalName= ,bstrUrl=http://portal.domain.com/customer/testerror1/Lists/TaxonomyHiddenList ,METADATAFLAGS=59
01b11c50-f800-0002-c532-4b6b816fcf01
Here are the full logs:
pastebin.com/vnHerVAw and another one: pastebin.com/RVg3kD5PI've been going through the logs and its giving me this:
05/15/2014 11:54:56.07 PowerShell_ISE.exe (0x1E1C)
0x1DF8 SharePoint Foundation
General aix9j
High SPRequest.GetMetadataForUrl: UserPrincipalName=i:0).w|s-1-5-21-3659363940-654044839-132917978-4964, AppPrincipalName= ,bstrUrl=http://portal.domain.com/customer/testerror1/Lists/TaxonomyHiddenList ,METADATAFLAGS=59
01b11c50-f800-0002-c532-4b6b816fcf01
But I only created a teamsite with some libraries without anything extra so I don't know why its giving me that..
**Ends up beeing a permission issue, still having the other errors with list not found :S -
Installation Fails :/ yxefkoe does not exist on the 'localhost' host
Hi Guys,
I am trying to install NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System on my pc. But I`m getting following error.
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
Here is the dump from the log file.
WARNING 2010-10-24 17:52:45.781
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\yxefkoe).
WARNING 2010-10-24 17:52:45.781
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
ERROR 2010-10-24 17:52:45.781
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.).
I have installed the Microsoft Loopback network adapter. And C:\WINDOWS\system32\drivers\etc\hosts file contains following entries.
127.0.0.1 localhost
10.10.0.10 anuja
10.10.0.10 being the address given to the Loopback connection and anuja is the hostname.
Please help me to solve this issue.
Thanks!Thank you PR Srinivas and Khaiser.
Actually I wish to explain how I solved the problem. I went to the key through the registry path. But saw that there was the folder present in the path but it was blank.
So I right clicked on the folder went to Permission. I tried giving Full Control Permission for 'System' user name which did not solve the problem.
Hence in the Permission option of yxefkoe registry key I clicked on Add. In the 'Select Groups or User' popup window I clicked on 'Advanced' option and then clicked on 'Find Now'. I selected the user name which I use to log in to windows and applied the changes.
After all these steps I found entries in the registry folder 'yxefkoe'. I right clicked on the yxefkoe folder and went to Permissions - > Gave Full Control to the newly added user name.
And then the problem was solved.
So I guess when you should find two users in the Permissions option on the yxefkoe folder.
1. System
2. User name which u use to log into windows. -- > It is displayed like this --> User_Name(Hostname/User_Name)
Correct me if i am incorrect here.
Thanks a lot for the help! -
Risk Analysis fails - role does not exist or has no authorizations
Dear all,
We have added our productive client to the ERP Logical system.
Then we extracted static and object data from backend and uploaded it to AC.
We are not able to preform an analasys.
On role level we get the error message: Warning: ZBC_ALL does not exist or has no authorizations
When checking in debugger we do find autorizations!
Actions:12
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 S00
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SBWP
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SM35
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SM36
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SMXX
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SO01
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SP02
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SU3
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SU51
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SU52
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SU53
LAS 2 ZBC_ALL ZBC_ALL T-LV210004 SU56
Objects/AuthKeys:9
LAS ZBC_ALL 2 ZBC_ALL S_BTCH_ADM||BTCADMIN 15 1 4 * false
LAS ZBC_ALL 2 ZBC_ALL S_WFAR_OBJ||ACTVT 36 1 22 03 false
LAS ZBC_ALL 2 ZBC_ALL S_ADMI_FCD||S_ADMI_FCD 8 1 1 ' ' false
LAS ZBC_ALL 2 ZBC_ALL S_DATASET||ACTVT 21 1 8 34 false
LAS ZBC_ALL 2 ZBC_ALL S_DATASET||ACTVT 21 1 8 33 false
LAS ZBC_ALL 2 ZBC_ALL S_DEVELOP||ACTVT 1 1 9 03 false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 DELE false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 FREE false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 LOCK false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 REOG false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 IMPO false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 EXPO false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 AONL false
LAS ZBC_ALL 2 ZBC_ALL S_BDC_MONI||BDCAKTI 48 1 2 ABTC false
LAS ZBC_ALL 2 ZBC_ALL S_OC_ROLE||OFFADMI 37 1 14 * false
LAS ZBC_ALL 2 ZBC_ALL S_PROGRAM||P_GROUP 5 2 17 * false
LAS ZBC_ALL 2 ZBC_ALL S_PROGRAM||P_ACTION 5 1 17 VARIANT false
LAS ZBC_ALL 2 ZBC_ALL S_PROGRAM||P_ACTION 5 1 17 SUBMIT false
LAS ZBC_ALL 2 ZBC_ALL S_PROGRAM||P_ACTION 5 1 17 BTCSUBMIT false
LAS ZBC_ALL 2 ZBC_ALL S_C_FUNCT||CFUNCNAME 12 2 7 * false
LAS ZBC_ALL 2 ZBC_ALL S_C_FUNCT||ACTVT 12 1 7 16 false
Total:21 lines
Total:9 Auth Key Map (key=PG) entries
Total: 9 Obj Map (key=AK) entries
What could cause the problem?
Fast respons = karma
Kind Regards,
VitHi Vit,
Did you run any job after you added one system to logical systems.
Please import role : ZBC_ALL through incremental role sync job for the system you have entered in ERP logical landscape .
Once it is completed , then schedule batch risk analysis Job for this role.
Then schedule Management report update .
run Role Level analysis again and check .
Thanks
Jasmine -
Installation Fails - \fcdmxy' does not exist on the 'localhost' host.
While installing Solution Manager 4.0 SR3//// How to fix this
Enclosed the log
WARNING 2006-02-17 07:52:50.984
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\fcdmxy).
WARNING 2006-02-17 07:52:50.984
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fcdmxy' does not exist on the 'localhost' host.
ERROR 2006-02-17 07:52:50.984
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fcdmxy' does not exist on the 'localhost' host.
ERROR 2006-02-17 07:52:50.984
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
INFO 2006-02-17 07:58:02.265
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect".
INFO[E] 2006-02-17 07:58:04.734
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2006-02-17 07:58:05.484
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2006-02-17 07:58:07.812
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2006-02-17 07:58:08.421
FSL-02077 File system export (share) saploc does not exist.
WARNING 2006-02-17 07:58:09.78
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\fcdmxy).
WARNING 2006-02-17 07:58:09.78
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fcdmxy' does not exist on the 'localhost' host.
ERROR 2006-02-17 07:58:09.78
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fcdmxy' does not exist on the 'localhost' host.
ERROR 2006-02-17 07:58:09.78
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
Rgds
Ver 1Andreas
You were right.
How it missed / How the issue born , But observed on that key in registry, Administrator is having no authorizations.
I navigated as explained by you
in Run Types Command : regedit
--> HKEY_LOCAL_MACHINE
>SYSTEM
>CurrentControlSet
>Services
>Clicked on "fcdmxy" ...Key
On Registry Menu
Clicked on --> Edit --> Permissions
Given full permissions to everyone.
restarted the server
restarted the installation & went thru.
But why how it would have lost. ????
Thanks techies for all your help
Rgds -
WEB TEMPLATE DOES NOT EXIST IN Q
Hello
First we created 15 reports in D and transported those reports to Q. Everything worked fine.
Then we created 3 new reports in D. The wemtemplate assigned to those reports is a new webtemplate created saving an already existing webtemplate (an which is already transported to Q) with a new name.
The 3 new reports work in D. But once transported to Q, they don't work there:
The initial exception that caused the request to fail was:
The Web template "Z..." does not exist in the master system
Please, does anybody know the solution for this issue?
Thanks in advance!
JonCan you open the new web template in the Q system using the web application designer? It seems, looking at the error message, that it is not transported.
-
11g R2 -silent install: "Template General_Purpose.dbc does not exist"
I'm working in an environment where no X-Windows/GUI is permitted; therefore, I'm attempting to perform a -silent install of 11g R2 on RHEL 5.3 and am finding the screen output to my terminal window less than helpful. Fortunately, a thorough review of the install actions log provides what appears to be my problem.
The screen output I receive is as follows (I've added some line breaks to make it more readable):
(oracle@blade2-1 database)$ cd /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database
(oracle@blade2-1 database)$ ./runInstaller -silent -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 91127 MB Passed
Checking swap space: must be greater than 150 MB. Actual 8000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-09-14_01-25-28PM. Please wait ...
(oracle@blade2-1 database)$
You can find the log of this install session at:
/u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log
That's it - no indication as to whether the installation was successful or failed or whether the NETCA/DBCA/etc. were successful or not.
I found that a listener existed after the install:
(oracle@blade2-1 database)$ ps -ef | grep tns
oracle 22597 1 0 13:29 ? 00:00:00 /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr LISTENER -inherit
My instance didn't appear to be up, though:
(oracle@blade2-1 database)$ ps -ef | grep ORCL11GD
oracle 22776 19142 0 13:39 pts/0 00:00:00 grep ORCL11GD
So, I checked the /u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log to see what it revealed. It shows me the following for the DBCA:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command /u01/app/oracle/product/11.2.0/db_1/bin/dbca -silent -createDatabase -templateName General_Purpose.dbc -sid ORCL11GD -gdbName orcl11gd.blade2-1.mycompany.com -emConfiguration LOCAL -storageType FS -datafileDestination /u02/oradata -datafileJarLocation /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp -characterset WE8ISO8859P15 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.2.0/db_1/install/oratab -automaticMemoryManagement true -totalMemory 2048 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Read: Template General_Purpose.dbc does not exist. Please specify an existing template for database creation.
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO: Oracle Database Configuration Assistant failed.
INFO: Oracle Database Configuration Assistant failed.
I don't see a template named "General_Purpose.dbc" in the $ORACLE_HOME/dbca/templates directory:
(oracle@blade2-1 database)$ cd /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates
(oracle@blade2-1 database)$ ls -lrt
total 23216
-rw-r--r-- 1 oracle oinstall 11492 Feb 25 2009 New_Database.dbt
-rwxr-xr-x 1 oracle oinstall 1179648 Aug 14 03:01 example.dmp
-rwxr-xr-x 1 oracle oinstall 22536192 Aug 14 03:01 example01.dfb
Any suggestions would be welcomed!Hans: None at all, unfortunately.
Srini: I obtained a copy of the note and read through it. It does look as though I should be able to run the DBCA in -silent mode to create a template, so no GUI needed. Thanks again!
On a side note: Did anybody else notice the "General_Purpose.dbc" template missing from the $ORACLE_HOME/dbca/templates directory after an 11g R2 software install on RHEL 5.3? I'm beginning to suspect that not all components were installed as expected during the software installation. the oraInstall<Date/Time>.err file is full of errors such as the following:
java.io.FileNotFoundException: /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Components/oracle.rdbms.install.seeddb/11.2.0.1.0/1/DataFiles/filegroup2.jar (No such file or directory)
All of these errors are complaining about only the following 4 compoments:
- oracle.ctx
- oracle.sysman.console.db
- oracle.owb.rsf
- oracle.rdbms.install.seeddb
Upon investigation, I found that there is no oracle.ctx, oracle.sysman.console.db, oracle.owb.rsf, or oracle.rdbms.install.seeddb under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Compoments. Instead, the grouping is located under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk2/database/stage/Components.
It seems that I may have staged the media incorrectly in two separate directories. Should I have unzipped both files into the same directory instead of separating them out? -
The Web template does not exist in the master system
We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?
Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA -
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Hi guys ,
I have actvated the above mentioned template in business content but when i performed a check in RS_TEMPLATE_MAINTAIN_70 , iam getting the followiong error.
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Web Item Report error: The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
The report cannot be opened
The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
Check whether the report is at this location and it can be read
Contact your system administrator. This error was recorded
Can anyone have some idea on this..
thanksAny help on this??
-
Error: web template does not exist in master system
I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
DeeptiDear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind -
Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is emptyMake sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Web template "0ADHOC" does not exist in the master system error
Hi to all,
The Web template "0ADHOC" does not exist in the master system.
Error coming while executing query on web template.
Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
Please can anyone tell me what the problem is?
I shall be thankful to you for this.
Regards
Pavneet RanaHi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
Template ID :
Reusable Web Item ID :
Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani -
DBCA in silent mode gives "template does not exist" error
We successfully created a database using the DBCA in silent mode like this:
dbca -silent -responseFile dbca.rspThen, attempting to create a second database on the same machine with a slightly different response file, we get the following error:
dbca -silent -responseFile dbca.rsp2
Template General Purpose does not exist. Please specify an existing template for database creation.The "General Purpose" template was used in the original database creation. It does exist. No logfile is created. Any ideas what could be causing this?We never did get to the bottom of the mysterious "template does not exist" error, but went with a solution that is better:
1. we used the already-existing database to create a clone template:
dbca -silent -createCloneTemplate -sourceDB OLD_SID -sysDBAUserName sys
-sysDBAPassword XXXX -templateName old_sid_copy.dbc
-maintainFileLocations true
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates (Note the use of the -maintainFileLocations switch)
2. edited the template file, replacing all instances of OLD_SID with NEW_SID
/local/opt/oracle/product/10.2.0/assistants/dbca/templates/old_sid_copy.dbc
3. create the clone using the new template
dbca -silent -createDatabase -templateName old_sid_copy.dbc
-gdbname NEW_SID.MYHOST.COM -sid NEW_SID
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates
-responseFile NO_VALUE -characterset WE8ISO8859P1 -
"Language-dependent text does not exist" when executing template on portal
Hi,
We are using BI 7 on SP 8. When trying to execute a web template in the portal we are getting a series of errors such as:
Language-dependent text does not exist: TYPE=REP KEY1=SAPLRRSV KEY2=705 LANG=
Has anyone experienced this problem and know of a fix?
Thanks,
LeeYes we have. The problem is due to the support stacks for ABAP and for Java being out of sync i.e. they have to be on the same patch level. If you run program RSPOR_SETUP (via SE38) and enter the relevant details for checking the portal setup, this will detail all the errors.
Lee
Maybe you are looking for
-
Ok so, my itunes version is up to date, and I've located my itunes media folder... However, newly purchsed songs are not being backed up to the media folder, despite all the right options being ticked in the preferences box. This is immensly frustrat
-
Hello BW Experts, Current Scenario: There is a daily snapshot of the BW system in nite for our Production server. During this they have to stop any jobs / loads running at that time. Secondly they take a backup every weekend. They stop any jobs / loa
-
How to get more power/capacity from my G5 2GHz DP, PPC?I own a fully max'd
I have a max'd out G5 Dual 2 GHz PPC w/2GB DDR SDRAM. Have 2 hard drives but are also max'd out - now effecting performance speed. I use the mac 99% for editing Video and Audio. Movies and files are stored on external HDs. If I am reading my specs ri
-
I just recently purchased a Nokia C3-01 and I somewhat cannot understand why the WLAN indicator above the screen disappears. I can successfully connect to our WLAN at home and after a few minutes of browsing, the indicator would just disappear and a
-
How set UserName and Password for HTTP Basic Authentication for a servlet
Hi.. How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server? Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml). But i dont know how do it in JBOSS.. I am using Netbeans