TEMPLATE INTERPRETATION FAILED
Hi I'm getting error message when trying to logon to 7.0 for the first time.
The Internet service bbpat05 does not exist in SRM when I check SE80. Given I'm in 7,0 and don't do W3_PUBLISH, how do I get the internet service to exist or is there another solution or source of the problem. Sorry for a bit of a poorly worded question but I am not a technical consultant, only functional!
Any help is appreciated!
Regards
Tracey
Hello,
If you are using SRM 7.0, this release uses Webdynpro technology, ITS is not used anymore.
Therefore, templates, transactions and HTMLs concepts are not valid anymore. You will not find them in SE80.
Regards,
Ricardo
Similar Messages
-
Template interpretation failed. Template does not exist.
Hi Gurus,
We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
Can anyone please confirm me..whether I'm right or anything need to be corrected ...
Thank you in advance.
Regards
NarenThanks.
Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
As per Config guide It happned after doing below steps .....
SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
Note
You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
3.1 Portal-Independent Navigation Frame and Inbox
3.1.1 Portal-Independent Navigation Frame Configuration
Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
(SAP SRM) applications without using SAP NetWeaver Portal.
Procedure
To configure the portal-independent navigation frame, proceed as follows:
1. In Customizing for SAP Supplier Relationship Management, define the following settings:
n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
Relationship Management under SRM Server Technical Basic Settings Portal-Independent
Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
the connection must end with one of the following character sequences:
l For a non-secure connection, use_HTTP.
Example: SAP_ERP_HTTP.
l For a secure connection, use _HTTPS.
Example: SAP_ERP_HTTPS.
n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
Client (NWBC) for HTML.
Thnaks -
ITS service interpreter failed error code 0x2101
Hi!
I am trying to access a transaction without a user having to logon manually. When opening the following link in the browser I am able to access the transaction without manual login:
http://itshostname:port/scripts/wgate/cv03n/!?client=010&login=username&password=test&language=DE&draw-doknr=10000009472&draw-dokar=999&draw-dokvr=02&~okcode=/0
However, the user and passwort are shown in cleartext and I do not want that for security reasons. AFAIK the way to achieve this is setting the parameters in a service file on the agate. Put the file cv03n.srvc in the service directory:
~client 010
~login username
~password test
~language DE
~transaction CV03N
After restarting the agate service and opening the follwing url I expected to see the same transaction as before when I put the parameters inside the url:
http://itshostname:port/scripts/wgate/cv03n/!?draw-doknr=10000009472&draw-dokar=999&draw-dokvr=02&~okcode=/0
Instead I got the error message:
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
I also tried to crypt the password. Additionally I tried to set only one parameter in the srvc file (client). Always the same error. Does anyone have an why I get this error as soon as a parameter is put into the service file?
SAP ITS 6.20 Patchlevel 18
SAP R/3 4.7
Browser IE 6.0 SP1
Greets
ChristianHi Christian,
as far as I can see you did anything right. Do you find further hints in your trace files when this error occurs?
Regards Ralph
EDIT
I just saw you created this service new? If yes you need to copy the other values from your webgui.srvc to your new service file, too (esecially ~webgui 1)
/EDIT
Message was edited by: Ralph Resech -
OI template error - Failed to create template
Hi,
I was under the impression that the Excel snapshot templates could be customized and tried to do this but it didn't work. I restored the master (copied it back to the template folder) but got an error message when I try to (re)set the template paths: Failed to create template (template name here).
I uninstalled OI completely and reinstalled (both server and client) but still get the above message, even when I changed the path where the templates are installed. This is only on the workstations, not on the server so I'm thinking that there is something on the workstation that is stored that doesn't get uninstalled when the add-on is uninstalled.
Even though the templates are installed in the folders indicated in the OI Company Setup, the snapshot templates are not available when in Outlook, no doubt because of this error message; there is something that isn't properly installed that links the templates to Outlook.
Any ideas how I get rid of this message? Don't see why uninstall would not fix this; sounds like a bug with the add-on.
Thank you,
Heather
Edited by: Heather Wilkinson on Mar 16, 2010 12:27 PMHi Heather,
Have you checked this thread yet?
Re: Outlook Integration Add-On Templates Error
Thanks,
Gordon -
NWA : template deployer failed exchange certificate step 47/58
Hi,
I have tried to regenerate certificate expired , but running nwa template deployer failed
setp 47/58& 48/58
import of the BI System Certificate from file system to the J2EE engine
In the NWA, I have java error exception :
Certificates array must have only one element in the TicketIssuerCertificate[1]
I have checked many notes, tried different things but but still the pb.
Did someone have already this error
Best
regards,
thomasHI,
Did you solve this issue? If yes can you please share
Thanks -
Template interpretation cancelled, syntax error
Hi All,
I have deployed the EBP business package in EP 7.0 and I get the following error when i try viewing the content
The following error text was processed in the system SRM : Template interpretation cancelled, syntax error.
The error occurred on the application server CTSINTCOSnw6_SRM_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS
Kindly help me.
regards,
Arunif the termination type is RABAX_STATE , it would generate dump in ABAP system. check txn ST22 to analyze the error
Raja -
Interpreter Failed Error.
Hi All,
I have a R/3 transaction which creates sales order,.. for this there is an ITS service ( it is a stand alone ITS ), developed in Flow logic with mixed mode. There is an upload facility to upload materials for creating a sales order. When i try to create a sales order with few materials it will get created. If i use many materials it gives me "Interpreter Failed" error. Even i have tried by debugging it, however there is no error in the R/3 transaction.
please let me know if you have any idea regarding the same.
Thanks & Regards,
Amarnath SInganamala.Hi Henning,
Thanks for your reply, the complete error message is.
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
The thing is when i run the service using debugger, it throws this error but the debugger ( R/3 trasaction ) will run properly.
Regards,
Amarnath Singanamala. -
Hi all,
Im in an implementation of SRS sap retail store, in the service wstl I have a button search help that gives me an Interpreter Failed when clicked, on then production machine, in the development machine the htmlb code is identical and works fine.
The button call´s a screen with a alv inside.
Im not able do do debug the htmlb code to see where is the bug
Any suggestions?
Thanks and regardsHi Luis,
in almost all cases an interpreter failure has a reason. It would be really
helpful to know it.
In order to find the reason one can us the common techniques as reading
trace files, examining the logs, look for some hints in the source of the
generated HTML etc.
How to do this is described in the documentation and there are some
wiki articles and blogs around.
Ok, just do this work, think about it and provide such information to us.
Information about the release used might be helpful too, don't you agree?
regards
Tobias -
I'm in the process of trying to convert an existing gen1 VM (Win Server 2012 R2) to a VM template using VMM 2012 R2 with rollup 1. The creation keeps failing with the following error :-
"Error
(2901)The operation did not complete successfully because of a parameter or call sequence
that is not valid.Recommended ActionEnsure
that the parameters are valid, and then try the operation again."
I've checked that the local administrator account for the machine being converted to a template and it is blank as expected and in an attempt to troubleshoot I've output the template creation script via the VMM GUI and executed the commands in order which appears
to have resolved the problem, well the template finishes creation, i'm yet to deploy a machine via it?
# Create VM Template Wizard Script
# Script generated on Thursday, April 3, 2014 12:52:15 PM by Virtual Machine Manager
# For additional help on cmdlet usage, type get-help <cmdlet name>
$VM = Get-SCVirtualMachine -VMMServer localhost -Name "MyTemplate_Template" -ID "98299447-83e1-4d98-a558-a96ebafcf9b5"
| where {$_.VMHost.Name -eq "myhost.mydomain.com"}
$LibraryServer = Get-SCLibraryServer -VMMServer localhost | where {$_.Name -eq "my.library.com"}
$GuestOSProfile = Get-SCGuestOSProfile -VMMServer localhost | where {$_.Name -eq "Windows Server 2012
R2"}
$OperatingSystem = Get-SCOperatingSystem -VMMServer localhost -ID "50b66974-c64a-4a06-b05a-7e6610c579a2"
| where {$_.Name -eq "Windows Server 2012 R2 Standard"}
$template = New-SCVMTemplate -Name "My Template" -RunAsynchronously -VM $VM -LibraryServer $LibraryServer
-SharePath "\\mylibrary.mydomain.com\SCVMM Library\Templates\mytemplatedestination" -GuestOSProfile $GuestOSProfile -JobGroup d2f2f539-85da-4091-ab08-abe739fc4761 -ComputerName "*" -TimeZone 85 -FullName "Administrator"
-OrganizationName "My Organisation" -Workgroup "WORKGROUP" -AnswerFile $null -OperatingSystem $OperatingSystem
Now the only fields that weren't populated when I ran through the gui were FullName and Organization? Before I changed the script these two fields were just set to ""? Is that what has potentially caused the issue are they both required fields?Your not the only one who can reproduce this. Did you ever find out what it was? I saw your post and tried your same work-around and it also worked for me via Powershell.
-
NWA -->deploy and change, Template Installer
scenario: BI-Java
1,create RFC destinations IN ABAP
error msg:
Create Destination in ABAP Import not successful Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERRORHi Shen,
Could you please share the solution. I tried all SAP notes I found with one listed in this thread, but to no avail.
I also faced error in step 12 in addition to 1.
Create Destination in ABAP
Import not successful
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERROR
Import ABAP Certificate to Engine
Import not successful
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':Error during executing Java Reflection:Remote call errored
regards, Sean. -
Hi
We have installed a dual stack SR2 system and patched to SPS15. When we run the DI template installer, it gives an error "Message with name [DIMasterPwdPolicyCheckMsg] does not exist [concat('. ',/getPasswordPolicyErrorTextOutput/Return/text()) ]"
We have seen the note 1145663 and so did all group creation and assignment manually and skipped these steps.
However when we get to Upload Default ACLS this step fails with unauthorized and trying to manually assign the ACLs listed in on SAP Help is very unclear. The document says there should be a View Permissions in the context menu however I don't see any of this. I have checked in the DTR Perspective in Developer Studio and tried to look in the /dtr URL.
Has anybody has this problem and how have they resolved it.
Thanks
Leigh White
SAP Technical ConsultantHi
Thanks Pascal - activated the DTR Admin plugin and was able to update ACL permissions.
For information - reply from SAP is that Template Installer is buggy with a dual stack install. We were on SPS15 which is the latest. All configuation therefore has to be done manually.
SAP were working on a fix for this.
thanks for the assistance -
XML Publisher 6.5.2 MS word Template Builder fails
Dear all,
My env is: Oracle DB 10.1.0.5 on redhat Linux, XML publisher 6.5.2 on Windows 2000.
While using the XML publisher GUI from the browser, I am able to connect successfully to the database.
However, when I try to build a RTF template from MS word, I am unable to do so. The MS word template builder wizard is throwing an exception, and I do not know how to solve it in spite of some googling around.
I gave the same connect identifier in the XMLP GUI (which connects) and also in the template builder (which fails to connect).
Any help/pointers for this will be welcome.
Best regards,
Ambarish.
Creating XDO Report at: Fri Mar 09 16:56:58 IST 2007
sql = select * from oblix_audit_events
description = First sample report from template builder
port = 1521
user = scott
host = ps2844
sid = coreid10.persistent.co.in
ReportParameters = {}
path = D:\Projects\xml_publisher\REPORTS\oamrept01
data_source_name = COREID10
name = oamrept01
java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:410)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:260)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:371)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:551)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at CreateXDOReport.getConnection(CreateXDOReport.java:49)
at CreateXDOReport.createXDOReport(CreateXDOReport.java:142)
at CreateXDOReport.process(CreateXDOReport.java:108)
at CreateXDOReport.main(CreateXDOReport.java:298)The opmn utility dumped core:
-rw------- 1 bill bill 279474176 Nov 15 13:46 /u02/oracle/bi/core.14808
# file core.14808
core.14808: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV), SVR4-style, from 'opmn'
I just love this shit! -
LMS 4.2.4 Baseline template deploy fails for 2960X
Hello,
we have Cisco Prime LMS 4.2.4 and I added a new switch type C2960X-24TS-L with IOS Version 15.0.2-EX1.
I'd like to deploy a baseline template, but it fails:
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> SSH,Telnet,TFTP
Execution Result:
CM0150 Deploy Baseline template to PRIMARY config on device failed Cause: Operation not supported for generic support devices
CM0056 Config fetch failed for xxxxx Cause:
PRIMARY-RUNNING config Fetch Operation failed for TFTP.
SSH: Failed to establish SSH connection to 10.xxx.xxx.xxx - Cause: Authentication failed on device 3 times.
Action: Check if protocol is supported by device and required device package is installed.
The device is reachable via telnet.
I think that I installed the latest device packages for LMS 4.2.4.
What could be the problem here?
Thanks,
KerstinHi Afroz,
when I checked the ssh-credentials, I got a failure on ssh enable.
The failure message on ACS is "missing user password".
I reentered the credentials, but the error persists.
I tried to login with the credentials manually, and it works. So the credentials are correct.
Last I deleted and re-added the device, but nothing has changed.
Other devices (not 2960X) working correct.
So I think maybe I haven't the latest device packages for 2960X-Switches. But here is the next problem, I can't check for latest packages:
[ Tue Apr 07 12:19:10 CEST 2015 ] INFO [DownloadManager : queryAllPkgs] : Going to collect download packages...
[ Tue Apr 07 12:19:12 CEST 2015 ] ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getXmlFileList():IOException:tools.cisco.com
Regards,
Kerstin -
BI Template Preview Failing with Namespace error
Narrowed down my complex report problem to this example -
1. BI 11g desktop version installed, working with 12i
2. Created an HelloWorld.rtf from following HellowWorld.xml, validated no errors, preview in PDF from desktop - worked fine.
3. Created data definition and template in Oracle. Uploaded rtf and xml file.
4. While preview - exception oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
This xml file provided in BI sample data. When I uploaded Oracle provided rtf and xml it works fine. That means xml file is good, template and data definition are good.
Here is how i am created template -
1. Open word 2007
2. Load xml data, loaded successfully
3. Open Table/Form - Drag row set - select all nodes
4. Save
5. Validate and preview desktop successfully.
6. Error only after uploading to Oracle
BI Option - i have right jre path, version 1.6.02. So looks like no issues there....
What i am missing here? Appreciate your help.
XML:
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
<NAME>Template Expert</NAME>
<DESCRIPTION>Congratulations on your first Template</DESCRIPTION>
</DATA>Hi,
Please add the sapmsSID entries for both systems (java and abap) in the /etc/services file of BOTH SERVERS. This means that each server should have entries for every system in your landscape.
Additionally, please ensure that this is set to 36<NN> and not 8100 as you mentioned. The reason is that 8100 is ABAP HTTP port, but 36<NN> is message server port. These two are different.
Try this.
Regards,
Shitij -
I have used this software for some time now without difficulty. Recently it has failed to translate, even though it appears to be processing the information. I've updated, reinstalled, powered off-and-on, etc. Nothing triggers correct operation.
Thanks Oliver. I uninstalled the application and then
uninstalled AIR 1.1. I then re-installed AIR 1.1 and attemped to
re-install the application. The error is still happening. Here is
the log file. Do you have any ideas?
Starting app install of <APP_URL> <-- let me know if
you need this url
UI SWF load is complete
UI initialized
Downloading file to
C:\Users\Rachel\AppData\Local\Temp\fla8B3E.tmp
Received HTTP Response Status event
Response URL is <APP_URL> <-- let me know if you
need this url
Waiting for user confirmation
User confirmed action: install
Unpackaging to C:\Users\Rachel\AppData\Local\Temp\fla9666.tmp
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id com.bridallive.Retailer
pub id 6341C81035B69B0DC07A41D6269B3F8B7C24EDE3.1
application not currently installed
Waiting for user confirmation
User confirmed action: install
creating native installer in:
C:\Users\Rachel\AppData\Local\Temp\flaAED7.tmp
native installer creation failed: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="Unhandled
exception Error: Error #3003" errorID=3003]
starting cleanup of temporary files
application installer exiting
Maybe you are looking for
-
Have just installed iMacG4 into office network pls help
*Small office: 4 Macs: hardware upgrade in process* We have two iMacs (Intel) which network perfectly. Click on network, see the other computer's name, click on it and you're in. That's the way it should be. No need to type a password and _you can se
-
Black screen after logging in KDE (dual monitor)
Hi everybody, I'm having a severe problem with kde 4.12.2; I'll explain my settings: 1) A screen 2560x1440 on DVI 2) A screen 1920x1080 on VGA My /etc/X11/xorg.conf is this Section "Monitor" Identifier "DVI-I-1" Option "Primary" "true" Option "Prefer
-
I have made quite a few shared photo streams and love the idea of sharing easily with a variety of friends and family. The problem in having is that any modifications made to the shared photostream (adding/deleting pictures) are not updated in the UR
-
Employee cant take leaves same date
Hi, How to restick that employee cant take leaves same date .
-
Activación macromedia studio mx 2004
He formateado mi equipo y tras instalar el Macromedia Studio MX 2004, cuando intento activarlo me dice que hay un problema en red. Sin embargo, tengo red. ¿Cómo podría solucionar este incidente? También he intentado activarlo por teléfono pero el tel