Template layered above content

It would be helpful if a template page as a whole or partially could be layerd above the content of a web page.
e.g. http://www.kohenderiks.nl/sales-rapportage.html
When changes (as I had recently) have to be made in the template I had to changes more pages separately, because the content disappears under the top of the page when scrolling.
I hope my issue is clearly described. If not, please let me know and I'll see if I can do better :-)
Thanks in advance!
Peter

You can do this in Muse already. You place the content from the Master page (or whatever page your on) on a layer above the other content.
Hope this helps.

Similar Messages

How to use custom aspx page as template for custom content type

Hi,
I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
Can anybody please let me know how to accomplish this?
Any help would be appreciated.
Thank you,
AA.

Check if you are looking for the below
http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
Please remember to click 'Mark as Answer' on the answer if it helps you

Can LC Designer produce a flat PDF, not form, as a template for dynamic content?

Can LiveCycle Designer produce a flat PDF, not form, as a template for dynamic content?

Yes that means LiveCycle Designer .....the XDP is an XML file that describes the template that you want. It is turned into a PDF by the Designer as well as the LC Server I mentioned. The Designer creates interactive content (not what you asked for), the server can do the same as well as flat PDFs. I mentioned the batch mode because that is how people generally use it or they use it for real time creation of the reports but it tends to be high volume (it is a server product so it will bepriced that way). You can create an XDP that has text and "floating fields" on it. Floating Fields are special in that you can merge data with the template and once the data is put into the field it is turned into text (non-interactive). This woudl be useful for testing (requires a hands on approach) but if there is any kind of volume that you are looking for this will not be useful. The server side can be automated so that no human intervention is required.
Paul

Templates for deploying content management in sap ep at user end

Where i can find templates for deploying content management at user end in sap enterprise portal ? or Please suggest me about default templates provided by sap if any for content management ?
Regards-
Sumeet Sharma

My question is not yet answered
hi, I want to know about Templates in the sense that what the information should be collected or form shoud be filled up for deploying content management at user's end from the user.?
what must be the contents for that form or template for content management or user id creation......?
Plz Reply...?
Thank's in advance
Regards-
Sumeet Sharma

Changes on room template in Coll - Content inconsistent !

Hi Collaboration experts,
I have a question on Collaboration Rooms again.
I have created a Java WebDynpro Wizard to create a new room, which works perfectly fine. I offer the possibilty to choose one of several room templates I have created for certain purposes ( <i>BI context</i> ). Then I use the ITemplate to get the related parameters I have defined when creating the template ( <i>Portal -> Content-Admin -> Collaboration-Content</i> ). The user can now enter values for those parameters. I have, for example, an iView in my template that displays an url and it works perfectly well that the user can choose any url to be displayed during my room creation wizard.
But when I change anything on the parameters, e.g. the description, in the template designer in <i>Portal -> Content-Admin -> Collaboration-Content</i>, the chnages are not consistent. When I run my wizard and get the parameters of the related template via ITemplate, I still get the former description, although it has been changed in the portal.
Can anyone tell if this is an error? Or am I missing something?
Thanks for your answers!!! ( Reward points are waiting for you )
Regards,
Sabine

Hi Thierry,
for each room you create also a group is created. The group name contains cryptical characters but also ROOM. Search in "User Administration" for room and you will find the group.
Check if the user is in this group.
The user normally will be added to this group if you add a room member in the room administration part.
The user needs also rights for the KM Content parts of the room. I don't know now where exactly but this is pretty fine described in the How to's.
Regards,
Stefan

Page Background Lost on Regions above Content Area for Some Pages

Hi - I am a iWeb novice, but not a total rookie on this kind of software...
I have a simple iWeb project that applies a gradient fill to the page background, and applies one of the gradient colors to the Browser background on every web page. I am using the "White" theme, and I have trouble with the "Photos" page template drawing Page backgrounds correctly. I have my content area set wider than the default to 1008 pixels to fill a 1024-wide display. I set my display area to 877 pixels high to coincide with the largest media dimension that I see with the inspector.
I looked here for previous discussions on this and failed to find anything. Maybe I missed a post...
Initially, most web pages load and display correctly the first time. One Photos web page, however, displays the Browser background - not the Page background above the centerline of the page name.
On several pages with a "Photos" template (but not all), the initial page is displayed correctly. But, when I click on a photo thumbnail and the page is revised to display the larger photo image in the content area, the Browser background is displayed in error above the content area, and the Page background displays correctly below the top of the content area.
I have looked for some consistent issue or characteristic that might let me predict when this problem occurs, but it ll looks rather random. It is repeatable, though - clearing caches and reloading the same page exposes the problem the same way a second time for the same page, in other words...
Is this a bug, or something subtle in placement or overlap of areas on the page that I haven't noticed? Anything to be careful with to avoid this problem?
Thanks anyone for any advice!
Brian
Message was edited by: Brian Crowe1

Hi Cyclosaurus and Apnewbie -
Thank you for your interest and replies. Here is a simple page that illustrates the problem I am having with a Page Background Gradient Fill on top of a Browser Background Solid Fill
http://web.mac.com/bccrowe/Troubleshooting/KyliesArt2.html
Here, I intend the page from the very top to the bottom of the defined content area to transition from pink to white as the eye moves left to right. The browser background is also pink to add some depth to the image - that's what you will see when the page loads.
Click on the child's drawing to present the image, and you should see the gradient disappear above the centerline of the second text box (above the comment area) when the page finished loading with the large drawing.
The Content area coincides precisely with the bottom of that second text box. I have tried to move the content area further below the text boxes so that they are not imtimate - no difference. I haven't tried to separate the text boxes, yet.
The two text boxes immediately above the content area are 45px x 630 px (18 pt text) and 30 px x 630 px (14 pt text) - they overlap by about 10 pix.
The content area that displays the thumbnail is 1008 px x 445 px (I thought that I set that at 877px...). I can try to set the content area to 877 px... Maybe this is the problem - maybe the Page Background shifts down to coincide with the bottom of the next page#2... Hmmm...
When you click on the thumbnail, the page#2 content area is 1008 px x 877 px.
In iWeb, this all looks the way I want it to.
Please diddle with the page, and ask me any new questions! I appreciate your insight and help. In reality, Kylie won't notice the background change, but my next objective is a corporate site - this child's site is my "training" site. iWeb is really pretty flexible and easy to use. If I there's a work-around or something to avoid, I can live with iWeb just fine.
Thanks again -
Brian

Captivate 4: How to place objects in layers above swf animation?

Hello,
Is it possible to place an object in a layer over a Flash animation (in a lower layer)? Whenever I try to do this, and then try to play the slide in preview, the Flash animation always "covers" the content in the above layers. Any ideas?
Thanks,
SJPVT

About my first problem :
The first time I click the open Button, only the Hide button appears. Then I click this hide button, to hide the hide button (the hide button hide the swf and itself).
Then I click again to the open buton, and this time, the swf and the hide button appear.

New to Flash - Imported layers contain contents of lower layers?

Hello.
I have just started using flash, and know next to nothing about some of its functions, so I apologise if I appear to ask questions with obvious answers.
Anyway, I am attempting to add animation to a previously created layered image, which I am importing from a .psd. The image is structured so that different layers contain translucent masks for objects below - e.g., an upper layer might contain a purple tint gradient which is overlayed on the layers below. I can open up this image in photoshop and it behaves as you might expect, but I'm having difficulties importing the image into flash. When I do, for some reason, the layer contents are modified so that some layers contain not only the contents previously in the layer, but the contents of everything below it, as if that layer and all layers below have been merged down into that one layer. The lower layers are still present, but any modifications made to them are not visible as they are blocked by lower layers. This does not seem to be true for all layers - only those that previously contained elements with an alpha value anywhere between 0 and 255 - i.e., the mask layers. This makes it impossible to achieve my goal, as I am attempting to animate the objects beneath the masks.
I'm not sure entirely why this is happening - it seems to be flash converting my layers in a very unintuitive manner. If anybody can help me figure out how to get around this, I would be very grateful. Possibly I could import each layer one at a time and re-arrange them in flash, but this would be very time consuming, especially considering that I may want to add animation to multiple similar files in the future. As such, if there is a way to get the layers to import correctly as arranged in the .psd, then this would be extremely useful.
Thanks!
[moved from AS3 forum - not AS related]

What are you using to generate the PSD?
Flash's mask support is a bit tricky. In most versions of flash it works as an on/off switch. If a layer is marked as a mask layer, if there is ANY data (transparent or not, white or black or any color), it considers that you want to show that portion of the layers it masks. If there is no bitmap data of any kind in the area, it will NOT show that.
Pictures are much easier to explain. This behavior would be much different in Photoshop.
In Flash, say you start with a giant ugly stock rainbow square as the graphic you wish to mask:
Note in the timeline above I have a layer above named 'mask' and it's set to actually be a mask layer. In that layer I have this radial black/white gradient:
If I pasted that into the alpha channel of a layer in Photoshop it would gradient the pictures transparency based on the black/gray/white. In flash, it doesn't care about that. All it cares about is there "is" or "is not" data. Since there's data in a larger region than the image it is masking, it will show the whole rainbow square below it, unlike Photoshop:
There's the output, mask applied.
Now if I actually cut a square of "bitmap data" out of the middle of the mask, Flash will dutifully clip that area so you can't see it. No data = can't see. So my new mask:
Now due to there being "missing data" in that rectangular area it will cut out that portion of the rainbow box:
Does this clarify a bit about the simplicity of masks?
To get masks to work a bit more like Photoshop there's a bit of a code workaround we've all used for quite a long time. You can read it in many links of you search for AS3 gradient mask. Take a look at the code samples to see how.

Adding layers after content

i learn as i go, so after i have created the content, i
discovered layers. now how can i add a layer to be behind the
content.

Now that you've discovered them, forget them. They will get
you into
serious trouble.
This may help you understand positioning a bit -
There are 4 different types of positioning:
Absolute
Relative
Fixed
Static
Here is a brief explanation of each kind of positioning (with
regard to
placement of elements on the page only)....
Position:absolute (or A/P elements)
This does several things -
1. It 'removes' the element from the flow of the code on
the� page so that
it can no longer influence the size or position of any other
pa�ge element
(except for those contained within it, of course).
2. The absolutely positioned element takes its position from
the position of
its closest PA�RENT *positioned* element - in the
absence of any explicitly
positioned parent, this will default to the <body> tag,
which is always
positioned
�at 0,0 in the browser viewport.
This means that it doesn't matter where in the HTML code the
laye�r's code
appears (between <body> and </body>), its
location on the screen will not
change (this assumes that you have not positioned the A/P
element within
a table or another A/P element, of course).
Furthe�rmore, the space in
which
this element would have appeared were it not
positi�oned is not preserved
on the screen. In other words, absolutely positioned elements
don't take
up any space on the page. In fact, they FLOAT over the page.
Position:relative (or R/P elements)
In contrast to absolute positioning, a relatively positioned
page element is
*not* removed from t�he flow of the code on the page,
so it will use the
spot
where it would have� appeared based on its position in
the code as its
zero point reference. If� you then supply top, right,
bottom, or left
positions
to the style for this �element, those values will be
used as offsets from
its
zero point.
This means that it DOES matter where in the code the
relativ�ely positioned
element appears (, as it will be positioned in that location
(�factoring in
the offsets) on the screen (this is true for any placement in
the code).
Furthermore, the space where this e�lement would have
appeared is
preserved in the display, and can therefore� affect
the placement of
succeeding elements. This means that the taller a relatively
positioned element is, the more space it forces on the page.
Position:static
As with relative position, static positions also "go with
�the flow". An
element with a static position cannot have values for
offset�s (top, right,
left, bottom) or if it has them, they will be ignored. Unless
explicitly
positioned, all div elements default to static positioning.
Position:fixed
A page element with this style will not scroll as the page
c�ontent scrolls.
Support for this in elements other than page backgrounds is
�quirky
There are several other things you need to know:
1. ANY page element can be positioned - paragraphs, tables,
images, lists,
etc.
2. The <div> tag is a BLOCK level tag. This means that
if it is not
positioned or explicitly styled otherwise, a) it will always
begin on a new
line on the screen, and b) it will always force content to a
new line below
it, and c) it will always take up the entire width of its
container (i.e.,
width:100%).
3. The placement of A/P elements *can* affect the BEHAVIOR of
other
elements
on the page. For example, a 'layer' placed over a hyperlink
will mask that
hyperlink.
You can see a good example of the essential difference
between absolute and
relative positioning here -
http://www.great-web-sights.com/g_layersdemo.asp
You can see a good demonstration of why using layers for a
page layout tool
is dangerous here -
http://www.great-web-sights.com/g_layer-overlap.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"makate" <[email protected]> wrote in
message
news:[email protected]...
>i learn as i go, so after i have created the content, i
discovered layers.
>now how can i add a layer to be behind the content.

Layers above a flash swf

On a simple page with a flash swf embedded, I want to put a
'loading' layer to show a 'please wait' message. That works fine
with any other objet, but with the swf underneath, the layer
doesn't appear. Is there something about the flash that makes the
'onload' true even though the flash file hasn't loaded?
Any options to placing a 'please wait' on top of the flash?
Thanks!

All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"frederiquecj" <[email protected]> wrote in
message
news:eparu6$p9t$[email protected]..
> On a simple page with a flash swf embedded, I want to
put a 'loading'
> layer to
> show a 'please wait' message. That works fine with any
other objet, but
> with
> the swf underneath, the layer doesn't appear. Is there
something about the
> flash that makes the 'onload' true even though the flash
file hasn't
> loaded?
> Any options to placing a 'please wait' on top of the
flash?
> Thanks!
>

Error facing after installing a template from BI Content.

Hi,
I installed a web template '0TPL1_SR_GL_DASHBOARD' from BI Content. In Grouping tab I selected 'only necessary objects' and clicked on Web Template becoz I already have queries activated in BI.
But While checking that in WAD I could see the template name but Web Items are not dispalying.and an error message
'Template Include Item TOP_INCLUDE unresolved or empty. Close and reopen template.' is dispalying.
Need your help in this regard. Please let me know if I missed anything while activating.
Thank you.

Hi,
A default template is designed to be executable with any query or query view.
Consequently, the data provider definition in these templates contains an empty data provider tag, which is then filled via the URL that provides a query or query view id.
So, it is natural that a data provider of these templates can neither be found nor instantiated.The behaviour is perfectly fine as it is.
Please apply the latest SPS and test the issue again.
https://websmp104.sap-ag.de/patches
Support Packages and Patches
SAP NetWeaver
SAP NETWEAVER
   SAP NETWEAVER 7.0 (2004S)
    Entry by Component
     BI Java
      BI BASE SERVICES 7.00
       #OS independent
       << (check for latest) >>
and
      BI WEB APPLICATIONS 7.00
       #OS independent
       << (check for latest) >>
Hope this helps,
Colum

Business Catalyst templates not containing content in Muse built site

I am currently upgrading a clients website and have recently got into designing using Muse and thought I would try out the BUsiness Catalyst system to host it all etc. I wanted to use muse for the more static opages and the the blog for case studies and the ecommerce section for the product catalogue (even though we will not be selling online).
All was going swimmingly until I found the pages I had created for the main template pages {tag_pagecontent} or any other module on that note. The site search results was doing it too if the results can over a certain length. Its seemed that the page would be stuck at a standard height. I have dragged the content box down to meet the footer guide so in theory it expands the page when it has to but for some reason this isnt working for me. I am not sure if it is how I have sut up the footer or the page or the way I have the master pages working or something. I have tried various options but am about to give up. I either have to bin business catalyst or just use muse to create the whole catalogue but with over 200 products this could take some time.
I woudld appreciated some help from some more experienced users or techincal heads. I hope it is an easy fix or there is some way around it.
Take a look at my draft site: http://langleydesign.businesscatalyst.com/index.html
and the pages that arent working correctly: http://langleydesign.businesscatalyst.com/case-studies
Also the sticky footer on these template pages and pages with module content (i.e the search results page) isnt sticking to the bottom as you can scroll past it. Which leads me to believe its something to do with the footer I have set up.
I can try and explain anything if needed. Thanks for your help in advance.
Some images attached for reference.

I did try unpinning but that didnt work for me either.
It took too long to get an answer so I am now using another system that doesnt have this problem. Hopefully when I use Muse again I wont have this problem. Sorry.
Thanks anyway. Maybe Ozaroth can send links to their site for instructions to get this solved.

Templates not containing content in Muse built site

I am currently upgrading a clients website and have recently got into designing using Muse and thought I would try out the BUsiness Catalyst system to host it all etc. I wanted to use muse for the more static opages and the the blog for case studies and the ecommerce section for the product catalogue (even though we will not be selling online).
All was going swimmingly until I found the pages I had created for the main template pages {tag_pagecontent} or any other module on that note. The site search results was doing it too if the results can over a certain length. Its seemed that the page would be stuck at a standard height. I have dragged the content box down to meet the footer guide so in theory it expands the page when it has to but for some reason this isnt working for me. I am not sure if it is how I have sut up the footer or the page or the way I have the master pages working or something. I have tried various options but am about to give up. I either have to bin business catalyst or just use muse to create the whole catalogue but with over 200 products this could take some time.
I woudld appreciated some help from some more experienced users or techincal heads. I hope it is an easy fix or there is some way around it.
Take a look at my draft site: http://langleydesign.businesscatalyst.com/index.html
and the pages that arent working correctly: http://langleydesign.businesscatalyst.com/case-studies
Also the sticky footer on these template pages and pages with module content (i.e the search results page) isnt sticking to the bottom as you can scroll past it. Which leads me to believe its something to do with the footer I have set up.
I can try and explain anything if needed. Thanks for your help in advance.
Some images attached for reference.

Does anyone have any ideason this?.... please!

Using differnent templates for same content

Hi all,
I have an issue where we have a Page Group with lots of pages/sub-pages.
There are three different User Groups, Internal, Customer and Supplier.
I need to display the same content but with different templates (look and feel), one for the Internal, one for the customer and one for the supplier.
Can this be done using Oracle Portal 10.1.14? If so, how?
Many thanks.

If you mean an HTML templates, you could use a CSS-based design and include logic in "oracle" tags in your HTML template that chooses the CSS based on group membership. You could use the wwsec_api.is_user_in_group function to check for group membership and display the appropriate CSS as a result.
If you're talking about three different portal templates, I'd recommend publishing your content as page portlets, and putting those portlets on three different pages, each having a different view privilege.
Or perhaps some combination of techniques would work.
I'm not sure what that has to do with having lots of pages/sub-pages". Are you trying to reuse more content and lower the number of pages?
HTH,
-John

Dreamweaver template child's content not displaying in Safari

I just created a template from this site:
http://www.bonch.tv/new/jarrett/comm.html
and made a new page from it, but the new page only shows the background in Safari, no other content:
http://www.bonch.tv/new/jarrett/comm_cancerpsa.html
It works fine in Firefox, though. Any help on figuring out what is causing this would be greatly appreciated.

In your template file, change this -
</script>

to this -
-->
</script>

Then given that you have 45 absolutely positioned elements on the page, it's fair to say that you have committed one of the more grievous mistakes a new developer can make: using absolute positioning as a primary layout tool. Looking at your page in FF I do not see any reason at all to use a single absolutely positioned container there....

Template layered above content

Similar Messages

Maybe you are looking for