Template reference not getting reflected after Creating WSP file of SubSite in SharePoint Online ( Office 365)

Hi all,
I am following below Steps:
Going to Library Setting.
After Click on Some Custom Content Types in content Type section.
Click on
Document
Set settings in Settings.
Brows and Upload Document Template in “Default Content” Section.
Click OK.
After Uploading Default Template I want these uploade template in my newly created Sub site (After saving Site as Template) which is created with wsp.
When i create new subsite i am not getting Default Content which have brwsed and Uploaded in Contenten Types.
Please Give some idea regarding below Screen Shot.
Thanks In Advance. Your help will be heighly appreciable.
For example i have given Document Link from any Library/List but not getting that link in new subsite which was created with wsp.
Thanks In Advance. Your help will be heighly appreciable.
Thanks,
Vivek Pandey

Hi Christoph,
From the article you mentioned, it needs add JPG file type to Search Service Application, which was not supported for SharePoint online.
I tried to add Picture content type to normal document library and tested the issue, it still displayed as item in Search results.
However, if I created a Picture Library and add Document content type to it, both image and document can be previewed in search result.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

Methodology/Processes Not getting reflected while creating a role via BRM in GRC

Hello All,
The methodology I have created is not getting reflected while creating a new Single role.
I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
Please suggest.
Thanks
Regards,
Shruti

Methodology is updated when you press save after completing the first step.
can you please share screen shots of configuration and issue you are getting

How to change Site Share mail template in SharePoint online (Office 365)

Hi,
I want to change the default mail template used in SharePoint Online (Office 365) which is as follows
I want to change the logo of microsoft with my custom logo and message below that logo.
How could i do that?

in Office365 SharePoint Online, if you wan to customize the alert template you need to customize the Alerttemplates.xml under 14 folder on Online server, but it is not permitted, check this article you
also have seen.
You can also post this question related SharePoint Online in dedicated Office365 SharePoint Online forum, you can get a better assistance there,
http://community.office365.com/en-us/forums/151/categories.aspx
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/0d31bb5d-d46b-425a-9f48-6100404b95d8/sharepoint-online-custom-alert-emails?forum=sharepointcustomizationprevious

How to get sharepoint online (office 365) data in cloud/windows azure (provider) hosted app using Javascript?

How to get sharepoint online (office 365) data in cloud/windows azure (provider) hosted app using Javascript?
I wish to retrieve sharepoint online data in html page (hosted in windows azure) using javascript and then need to play with AngularJS

Hi,
According to your description, you might want to get data from Office 365 SharePoint Online(also known as host web) and pass to the Provider Hosted App which is hosted
in Windows Azure site.
I would suggest you take a look at the links below about accessing data from the host web
for a quick start:
https://msdn.microsoft.com/en-us/library/office/fp179927(v=office.15).aspx#SP15Accessdatafromremoteapp_Codeexample
http://dannyjessee.com/blog/index.php/2014/07/accessing-sharepoint-data-from-provider-hosted-apps-use-the-right-context/
Aother sample solution for your reference:
https://code.msdn.microsoft.com/SharePoint-2013-Get-the-0ec36bb6
Best regards
Patrick Liang
TechNet Community Support

Lotus notes migration to SharePoint online Office 365

Hi there,
My organization is looking to migrate from Lotus notes to SharePoint Online Office 365 (SharePoint 2013).
We are doing this without any help of a tool.
I am going to create the wiki pages.
There are around 1600 pages which are interlinked and approximately 15 links on every page.
Is there any means I can automate the linking of wiki pages.
Can a workflow be written to do so..??
Please advise
Many thanks.

Yes, this can be automated. However in doing so you're effectively building your own tool which will cost more than buying a pre-built one.
This isn't going to be possible with a SharePoint workflow. First you'll have to read the Lotus notes content, then you'll want to serialise that into a format for import and clean up any links or dead pages. Then you'll have to use the CSOM or REST
APIs to create, populate and publish those pages.
This won't be a quick task.

How to Get user profile properties in provider -cloud hosted app in sharepoint online - office 365 using REST API?

How to Get user profile properties in provider -cloud hosted app in sharepoint online - office 365 using REST API?
any idea?

Hi,
From your description, my understanding is that you want to get user profile properties in provider-hosted app in SharePoint online using REST API.
Here is sample code for getting user profile properties:
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
Here is a blog below about accessing data from the provider-host apps:
http://dannyjessee.com/blog/index.php/2014/07/accessing-sharepoint-data-from-provider-hosted-apps-use-the-right-context/
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Any way to get all users's user profile proeprty using CSOM c# for sharepoint online - office 365?

Any way to get all users's user profile proeprty using CSOM c# for sharepoint online - office 365?

Since CSOM provides methods for operations related to people per
user scope, you could retrieve all site users first using SP.Web.siteUsers
property. and then use SP.UserProfiles.PeopleManager.getUserProfilePropertyFor
Method to get property.
[custom.development]

Creating a new address list for Exchange Online (Office 365) by two parameters

Good day!
I need to create two new address list in Exchange Online 2013 (Office 365) that users will choose the two parameters.
Address sheet1: No staff
Address Sheet2: Staff
Parameters address sheet not staff:
Parameter 1: Company
It must match the value - MyCompany
Parameter 2: job title
it must be different from the value - Staff
Parameters address sheet Staff:
Parameter 1: Company
It must match the value - MyCompany
Parameter 2: job title
It must match the value - Staff
Problems:
1) Is it possible to filter user mailboxes on the parameter of discrepancy?
2) Can not find the parameter values for the script field job title
https://technet.microsoft.com/ru-ru/library/aa996912%28v=exchg.150%29.aspx
https://technet.microsoft.com/en-us/library/bb738157%28v=exchg.150%29.aspx
While on the side of 365 in the user properties such parameter is:
http://joxi.ru/MAj0Jj7hGyDbme
Company option too.

I got to build a team that I need (describes the necessary conditions)
and successfully held in PS 4.0 after connecting to the office 365:
1) Set-ExecutionPolicy unrestricted
2) $ UserCredential = Get-Credential
(Data Entry Administrator 365)
3) $ Session = New-PSSession -ConfigurationName
Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -Credential $ UserCredential -Authentication Basic -AllowRedirection
Import-PSSession $ Session
4)
PS C:\Windows\system32> New-AddressList -Name 'TEST1234' -RecipientFilter {((RecipientType -eq 'UserMailbox') -and ((Com
pany -eq 'Company1') -and (Title -ne 'Student')))}
Name DisplayName RecipientFilter
TEST1234 TEST1234 ((RecipientType -eq 'UserMailbox')
-and (((Company -eq 'Company1...
As a result, the new address list TEST1234 immediately appears. (When creating a new letter in the menu "To"), but on the inside
it is empty (although there is 1 user which is fully consistent with those described in the filter conditions.).
= (
Tried a simple version:
Office365
не отображается в адресном списке.">The same thing - the only user with such parameters in AD -> Office365 is not displayed in the address list.
(After running for a list TEST123 more than two days)
Tell me what could be the problem?

Migrating SP 2010 to SharePoint Online (Office 365) - Site Template issue - Any advice?

Hi there,
I am migrating our SP 2010 site collection to O365 SharePoint Online. The new sites do not show up fine, I suspect this is because I am choosing wrong site templates. Any advice on this will be appreciated.
Thank you.

You can test this if you open your office 365 site in your browser, and then off IE menu, view source, and search for
g_wsaSiteTemplateId
then you can see what that results in, possibly g_wsaSiteTemplateId = BLANKINTERNET#0'
do same steps for your SharePoint site, if they have the same value for g_wsaSiteTemplateId, you'll need to export content granually, each list and library and then upload to your Office 365. There are 3rd party tools out there that will do this for
you too. for ex,
http://www.metalogix.com/cloud1/cloud-acceleration-suite-for-Office-365?utm_source=Bing%20Ads&utm_medium=cpc&utm_campaign=701a0000000ug99
Stacy www.sharepointpapa.com

Roles not getting reflected after logout

Hi All,
I am using JDeveloper, LDAP , and Single Sign on for authentication and Roles.
After the user is authenticated using SSO I have the following code in my Action class
String userDN = actionContext.getHttpServletRequest().getHeader("Osso-User-Dn");
using this I get the UserId.
Also I check the roles in JSP as
request.isUserInRole("VOLUNTEER");
The above works fine.
Now the admin changes the roles of a user. Immediately if the user tries to login his roles are not reflected. The roles in LDAP are reflected.
Let me know how isUserInRole works and if there is any caching problem with it.
Any help will be appreciated.

You need to adjust the cache. You can find info on how to to this here:
http://download-west.oracle.com/otn_hosted_doc/ias/preview/web.1013/b14429.pdf
It is in section 5 "Configuring OC4J Instance" of the J2EE Security Guide. You may want to disable the cache.

Memory does not get released after encrypting/ decrypting files.

I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?

ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks.

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Values in parallel flow are not getting reflected

Hi ,
I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
Please help me
Thanks
Sailendra

Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
This is going to take a knowledge of:
<li> Correlation - initiate and terminate methods
<li> Notification using logic from a screenflow and
<li> Message Wait activity with an Interrupt property
It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
args[] = clientCaseId
args[] = productId
Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
// this assumes your time interval in your due transition is called "myTimer" and you just
//   want to stop it
myTimer = null
action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
args as Any[Any]
args["clientCaseId"] = clientCase.clientCaseId
args["productId"] = clientCase.products.first.product.productId
send(Notification, processId : "/DepartmentApprovals",
                                        activityName : "WaitForEarlyReleaseCompletion",
                                        arguments : args,
                                        argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

Enhancement not getting reflected in Info Cube

Hello Friends,
I have made enhancement for getting additional data in the InfoCube 0SD_C03 fro data source 2LIS_13_VDITM .I have made changes in Communication Structure and transfer structure as well . But i am getting the required data in the psa and addition fields are not getting reflected in the infocube . Please suggest me a solution .
Regards
Nilesh Vakil

Hi,
You have to map the Rules in two Transformations. One for DataSourec to InfoSource and InfoSource to Cube.
Confirm that you entered all the infoobjects and those compound objects too into the cube, Don't forget to map compound objects in transformation rules. Activate every single object individually.
Did you create DTP for cube? In BI 7.0 for InfoPackage by default "psa only".
Aparna.

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Template reference not getting reflected after Creating WSP file of SubSite in SharePoint Online ( Office 365)

Similar Messages

Maybe you are looking for