Template size 400KB, my site 40000KB

Hi,
I downloaded a template and then used it to create a website.
The website I created is HUGE KB wise and takes absolutely forever
to load, but there isn't much on it per se. How do I decrease the
file size? Should I delete all the pictures that they already had
in their template that I am not using etc? Or will that only
minimally affect the size.
I am also having real trouble uploading it to my host as I
have to (apparently) go through Dreamweaver to create the files.
Any hints on that would be greatly appreciated too!
Thanks
Tanya

Tanya,
Yes, delete all of the jpgs from the library that you are not
using. Also,
go into the publish settings in Flash and make sure that the
compress movie
option is selected. It's also a good idea to reduce the jpg
quality.
Dan Mode
->Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"coylayr" <[email protected]> wrote in
message
news:eathkd$72b$[email protected]..
> Hi,
> I downloaded a template and then used it to create a
website. The website
> I
> created is HUGE KB wise and takes absolutely forever to
load, but there
> isn't
> much on it per se. How do I decrease the file size?
Should I delete all
> the
> pictures that they already had in their template that I
am not using etc?
> Or
> will that only minimally affect the size.
> I am also having real trouble uploading it to my host as
I have to
> (apparently) go through Dreamweaver to create the files.
Any hints on that
> would be greatly appreciated too!
>
> Thanks
>
> Tanya
>

Similar Messages

Sharepoint 2003 Message please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.

Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCP

how large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

How do I change the template size in pages on my iPad

How do I change the template size in pages on my iPad I've looked every where for the answer.
Please help I'm trying to make a program

You can't. Those are functions of the the template.

How do i get my screen size of web sites back to normal size.

how do i get my screen size of web sites back to normal size.

Try COMMAND and two finger drag on the trackpad.
Ciao.

Unable to apply a new site template to a new site collection's root web

Hi folks,
Using PowerShell I need to create a new site collection and add a new site template to its root web. I've tried but failed...
I created the site template from a team site that I modified and then saved it as a site template and saved the template to an WSP file (in the solutions gallery).
I have tried both of the following methods but can't find the template to add to the root web of the site collection. Help!!
Method 1 - Create the site collection, deploy & install the template as a user solution, and apply the template
I did the following, but it doesn't work because Get-SPWeb doesn't find it. If I run Get-SPWeb with no parameters the list it returns doesn't include my template. So site.GetWebTemplates includes it but Get-SPWebTemplate doesn't.
# Create the site collection
$site = New-SPSite $siteURL -OwnerAlias $owner -SecondaryOwnerAlias $secondOwner -name $studentName -Description $description
# Deploy and install the template
$wsp = Add-SPUserSolution -LiteralPath $wspPath -Site $siteURL
$wsp = Install-SPUserSolution -Identity $wspIdentity -Site $siteURL
# Assign the template.
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates)
Write-Host $child.Name
If ($child.Name.EndsWith("ABC")
# the name of the template that I added ends in "ABC" - when this script runs I the name of my
#added template displays as "{longGUID}#1ABC"
$template = $child
$templateID = $child.Name
$template = Get-SPWebTemplate $templateID
# regardless of whether I assign $template above or here the Set-SP_Web assignment below fails
$web = Get-SPWeb $siteURL
$web | Set-SPWeb
-Template $template
Method 2 - Deploy and install the template as a farm solution, create the site collection, and apply the template
I did the following. After I did the first section (deploy and install the solution to the farm) I was able to go to "Manage Farm Solutions" in CA and it was listed there, but neither
site.GetWebTemplates nor Get-SPWebTemplate included the site template in their list of templates.
# Deploy and install the solution to the farm
$template = Add-SPSolution -LiteralPath "C:\SharePoint\Student Site.wsp"
$template | Install-SPSolution
Do {Start-Sleep 2 } while (!((Get-SPSolution $template).Deployed))
# Create the site collection
$site = New-SPSite $siteURL -OwnerAlias $owner -SecondaryOwnerAlias $secondOwner -name $studentName -Description $description
# Assign the template.
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates)
      Write-Host $child.Name
        If ($child.Name.EndsWith("ABC")
# the name of the template that I added ends in "ABC" - when this script runs I the name of my
#added template displays as "{longGUID}#1ABC"
                        $template = $child
                        $templateID = $child.Name
$template = Get-SPWebTemplate $templateID
# regardless of whether I assign $template above or here the Set-SP_Web assignment below fails
$web = Get-SPWeb $siteURL
$web | Set-SPWeb
-Template $template
David

Out of curiosity, are you able to create a site within a site collection using this template? That is, can you create a site that is not the root site (e.g. http://sharepoint/sitecollection/Web)?
Jason Warren
Infrastructure Specialist
Habanero Consulting Group
habaneroconsulting.com/blog

How to get flash template name from a site.

Hello, I recently discovered a site and loved the gallery image used on the home page. I tried to find the name of the flash template used in the image gallery but couldn't find any way on the site. Could you kindly tell if there is any way to find the name of flash template from a site where it is used. The site link is dsm.com/corporate/home.html.
If you have any idea about the flash template used in this site, please inform me. I want to integrate on my site. Thanks for your effort.

you'd have to download and decompile the swf. and that will only help if the template author left comments indicating the template's origin and the user did not remove those comments.

How to publish an Admin-Approved InfoPath template to 2 different site collections, and retain same internal column names

Hi,
I am wondering how best to publish an InfoPath form as an Admin-Approved template, to both Site Collection 1 (SC1) and Site Collection 2 (SC2). Some fields are promoted to SharePoint columns.
I have already published my form to SC1, by choosing Publish to SharePoint Server > chose SC1 > Admin-approved > chose to publish to columns I had created manually on SC1 (these columns had relatively user-friendly internal names such
as 'Form_x0020_Status' etc, which I reference in xsl + code). I then uploaded the template in Central Admin as Admin-Approved, and activated the feature on SC1. This all worked fine.
However, if I then go to activate the feature on SC2, it creates columns with different internal names (GUIDs), which means my xsl + code won't work. If I try creating columns manually on SC2 before publishing, it still creates new GUID columns.
This of course must be because on feature activation on SC2, it cannot find the exact columns specified in the template (which was published to SC1), so it creates new ones.
In that case, what is the best way to publish an Admin-Approved template to 2 different site collections? One option is to create the columns using code, and deploy them to both sites as a feature, ensuring all IDs are the same. But should this be necessary, is
there any option available using only InfoPath and SharePoint?
Thanks for reading.

Check these similar threads
Republish
existing InfoPath Form to a different SharePoint Site
How
to Programmatically Publish an InfoPath 2010 Template (.xsn) to Multiple SharePoint Sites
Hope it will help
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Can I reset the free partner site back to the original site template? Or, can I apply a different template to my partner site?

Can I reset the free partner site back to the original site template? And, Or, can I apply a different template to my partner site?@

Thank You All for your help! I found the apply templates widget but no option are given. Do I need to upload a custom template? I have my partner site all messed up.

Templates Sizes?

I take it Keynote only has one template size, 1024x768 4:3. Even if you make a costume size template on your desktop computer, keynote will import the template at 1024x768. So, templates with and aspect ratio of 16:9 is out of the question.
I also notice when importing videos or photo. They are not imported at their current size. They have to be resized in keynote. Is this correct?

I'm asking asking...

IWeb opens only a blank template not my full site.

MacBook Pro, OS X 10.6.8, iWeb 3.0.4
Trying to update my web site and it won't open when I click on the icon. I get only a blank iWeb template. The other 20-30 pages seem to have evaporated.
Can anyone help?
Many thanks.

Thanks for your response Viking, but Hosting is not the problem. I now use Hostgator for hosting and it works fine.
The problem is when I click on my iWeb icon on my computer to open the site I have created over the years, my site does not appear. I get only a blank iWeb template as if my site has evaporated.
I am trying to add some new material to my site which resides on my laptop.

Changing Template for large intranet site

Hello,
I need to make template changes for a rather large intranet
site. The templates affect the entire site that have several
directories. Is there a way to do it by directory rather than the
entire site at once?

Yes. Consider this example -
PARENT PAGE (index.shtml) -
<html>
<head>
<title>I AM THE PARENT</title>
</head>
<body>

</body>
</html>
INCLUDE FILE (foo.html) -
<p>Hello World!</p>
> 3. Save the code in the templates that will be common in
all files as
> .SSI
> file (.txt files?)
You can use any extension you want. However, if these files
contain
server-scripting, then the extension would have to reflect
that. In other
words, if foo.html in the example above contained -
<p><?php echo "Hello World!"; ?></p>
then it would have to be named foo.php.
> 4. Change all files that now use the templates to
include the .SSI file
Yes - or in the event that the includes were in the
non-editable regions you
would need to change the template.
> 5. Rename the files using the .SSI files to have an
extension of .SHTML
The parent pages would have this extension or an extension
that reflects the
coding method used. Your links to these pages would have to
change as well.
Be aware that this will break any existing bookmarks to the
now defunct
pages, including those that have been spidered by the search
engines....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ValedaW2" <[email protected]> wrote in
message
news:[email protected]...
> By definition, would the SSI files be considered
fragment files?
>
> I am trying to determine the steps I would need to take
to setup my
> environment. This is what I understand from what you
have told me.
>
> 1. Make sure that SSI is enabled on the server.
> 2. Make required changes to the templates.
> 3. Save the code in the templates that will be common in
all files as
> .SSI
> file (.txt files?)
> 4. Change all files that now use the templates to
include the .SSI file
> 5. Rename the files using the .SSI files to have an
extension of .SHTML
>
> Does this seem right, or have I missed something?
>

Template Size Issues

I have been having many issues with templates. I make a
template and it appears so different in different browsers, then I
have pages that are nearly identical and some of the fixed
templatre areas are huge and some are tiny.
Is there any way to lock down some parts of the template so
they can't change size in browsers?
Or, how can I lock down the size of a table?
See my problem here, same template, different size buttons at
top.
http://lostjewels.com/apiery.html
http://lostjewels.com/azure.html
I'm so frustrated. I just want a simple site to sell my
jewelry. PLease help! THANKS!

Actually, the problem was CSS, and got solved. :-)
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> The real problem is not understanding how templates
work, to tell you the
> truth. Templates have nothing to do with the issues
being seen on these
> pages.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Joris van Lier" <[email protected]> wrote in
message
> news:[email protected]...
>>
>>
>> "P@tty Ayers ~ACE"
<[email protected]> wrote in
>> message news:[email protected]...
>>>
>>> "Joris van Lier" <[email protected]>
wrote in message
>>> news:[email protected]...
>>>>
>>>>
>>>> "P@tty Ayers ~ACE"
<[email protected]> wrote in
>>>> message
news:[email protected]...
>>>>>
>>>>> "Joris van Lier"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Your problem is the use of tables
for layout, please search this
>>>>>> forum or way for Murray to reply.
>>>>>
>>>>> This is not accurate - the problems have
to do with her styling of
>>>>> text, and are not any direct result of
her use of tables.
>>>>>
>>>>
>>>> Thanks for correcting me Patty, I should
have said
>>>> Your FIRST problem is the use of tables for
layout
>>>> Second problem would be the duplication of
the .style3 class in the
>>>> editable portion of the head.
>>>
>>> Well, no, since using tables isn't causing her
any problems at all
>>> there. :-) With the style problem fixed, the
pages are fine.
>>>
>> Well maybe not in the case of the text-size, since
OP mentioned "some of
>> the fixed templatre areas are huge and some are
tiny" and seeing the
>> table I assumed that was the problem, and I thought
the general consensus
>> was that tables are "not done" anymore, but that's
another thread 8)
>>
>>
>>
>>
>

How can i re-size a page to match my template size?

Hi guys,
I want to open an external link (Let's say YAHOO) in my website template.
do you know if there is a way to match it to the size of my template (I don't like the slide bars)?
is there a HTML code to do that ?
Let me give you an example(please note, these sites are randomly selected and i am not affiliated with any of those):
The original forum size is this:
http://forums.devnetwork.net/
But is has been managed to fit the screen there:
http://www.makeasocialnetwork.com/phpbb3_integrated
Could you please help?

Maximaxxx wrote:
Hi guys,
I want to open an external link (Let's say YAHOO) in my website template.
do you know if there is a way to match it to the size of my template (I don't like the slide bars)?
is there a HTML code to do that ?
Let me give you an example(please note, these sites are randomly selected and i am not affiliated with any of those):
The original forum size is this:
http://forums.devnetwork.net/
But is has been managed to fit the screen there:
http://www.makeasocialnetwork.com/phpbb3_integrated
Could you please help?
The only way to open a location that is external to your domain would be if you use frames, and open that external page in a frame. There are many complications that could ensue from your decision to do this, including size mismatches, inability to open the domain in a frame, etc.
The only way you can control the size of an external page is if you also have access to that external page's source code.
So, practically speaking, the answer is 'no'.

How do I set the screen size of my site?

Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
Thanks to anyone that can help, can't find a tutorial anywhere

In the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.

Custom SharePoint 2013 workflow activities in site template throw error on site creation

Hi all,
I have created a number of custom activities for SharePoint 2013 Workflows and I am using them on an Office 365 environment. The custom activities are packaged as a sandbox solution and deployed on my Office 365 site. Everything works as expected.
I have now created a site with all the functionality I need, including some Site and List workflows - all of them containing my custom activities. I saved the site as a template - including content - and the process was completed successfully.
My problem is that when I try to create a site based on that template, I get the following error:
Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_66b9230b_823e_4783_82b8_daf481237847' from scope '/spo/d42a4487-9465-4347-9f2c-a2718e92fc02/74d0f9e7-fb35-493d-86fb-ab7aa27da7e0/c2e1bf45-cf67-4e13-9755-421cf92395f8'
was not found. HTTP headers received from the server - ActivityId: 0997496a-5a15-4b83-82eb-727881eefa67. NodeId: . Scope: . Client ActivityId : c82f6e9c-9f8f-808b-7679-f2c0f92a339d. ---> System.Net.WebException: The remote server returned an error
After a number of trials and errors, I am certain that this relates to my custom activities. i have already tested all of the following scenarios:
Delete the workflow with the custom actions: Site is created successfully.
Create a new workflow with no custom actions and save the site as a template:
Site is created successfully.
Save the site template including a workflow with my custom activities, but not including content:
Site is created successfully, but my workflow is not there.
Create a new custom workflow activities sandbox with one custom activity that just writes something to the history list - just to make sure that this is not related to any specific solution. Save the site as a template:
Site creation throws the same error.
Packaged my workflow (with my custom activities) as a wsp from SharePoint Designer and deployed it as a custom solution. Activated the feature in the target site. The workflow gets created and executing finally. Saved the site as template: Site
creation throws the same error.
Same as above, but without activating the feature in the target site: Site created successfully, workflow works fine after I activate the feature in the new site.
My custom activities feature is always enabled in the site I save as template - in all of the above scenarios.
I have tested all of the above scenarios both on SharePoint 2013 on-premise and Office 365. There is
a forum post regarding some inconsistencies in the wsp file, but unfortunately this is not my case. Am I doing something wrong? Are custom 2013 workflow activities not supported in site templates - which would not actually make any sense, as it would "break"
the fundamental concept of re-usability.
Any ideas/feedback/guidance?
Thanx in advance

Hi,
I am facing the same issue. Kindly help me out if any of them have solved similar issue.
Your help would be appreciated.
manikantan

Template size 400KB, my site 40000KB

Similar Messages

Maybe you are looking for