Template Update Problems
When i create the template I put some flash movies, I create
my pages with this template and all work fine, but when I make some
change in the template and after update the pages. when I open one
of the pages the flash movies dont load. anyone can help me with
this. tanks
Hi,
You can't develop Windows Store app with Windows 7. So when you installed VS 2013 on a Win7, the templates are not present. Only the template compatible with Win7 are installed.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.
Similar Messages
-
Oh Dear,
I believe I made a terrible mistake with my template.
I realized that there were 2 copies of my template in 2 different folders. So, I renamed one of the Templates folders.
Now, when I update the template the 29 pages that should be updated are not being updated.
I tried renaming the Renamed Folder back to the original name and still the 29 pages don't update
What is required for me to fix this problem?
Many thanks,
AlisonI always create a new page from the template that is in my assets panel. I have 6 other templates in this folder for other websites that I've created.
When I realized that I had two template folders (one with my 6 templates and one with the 1 duplicate template) I tried to create a new page from the template in the other folder and the spry formatting for my navigation isn't formattted so I didn't use it. Then I thought I should delete it and did so via the computers explorer window.
Afterwards when I created a new page from the template that is in my assets panel I noticed that it only updates the index page and not the 30 children.
I recreated the folder the computers explorer window and put a copy of the template in the new renamed folder. I do not use the template in this folder.
Thanks for any help you can provide.
Alison -
CS4 Problem with Template Updates
There's another thread on this subject, but I couldn't see any final resolution.
I'm having a problem with Template Update.
I have all pages in site linked to a single template. I built the template 1st and then created each page from the template using normal method.
When I now make a change to the template, I save the template and it automatically saves and opens a box to select pages to update. I do NOT have to use the Updates feature on the top menus, but I have done that too just to try different things. When I select all the files, it updates them all, most of them correctly. BUT, one or several of them will have a NEW Main Content (and sometimes header) superimposed on top of the existing Main Content (or header). It shifts the page downward and to the right. By the way, down below the screwed section, the content is all still there and the original template is still intact under the screwed up area.
To fix it, I create a new page from the template and start over inserting the Main Content, which is nothing special, just formatted text. Next time I update, that same page will always get screwed up again, but sometimes 1 or more different pages will also get screwed up in the same way, always with a new nested Main Content area (on top of the original or sometimes pushed down half a page).
I thought it might be because of a nested Main Content in that section of the template, but I see none, or any other abnormal html. It does not do this to all 20-30 pages, just one every time and one or more random ones. I see nothing in html different from one page to the next.
Don't know how to attach documents to this, but I have the template and two of the screwed up pages to send.
Charlie
[email protected]The site is http://www.michaelchekhov.net
Public directory is /public_html, but that's the root, so the links below should work.
These pages are out of their normal directory, so the supporting links won't work, but you can see the code. Look at the home page and you can see what all the pages are supposed to look like.
The template which created the problem with the pages below is at /support/TEMPLATE index.dwt
The page that consistently fails is called poatool.html - the bad one is at /support/BAD poatool.html
A 2nd page that failed on that UPDATE is there also - /support/BAD bibliography.html
The currently working copy of the page that fails everytime is /articles/poatool.html.
Thanks.
Charlie -
Odd template updating behavior
hello all,
I've got some weird behavior happening with a template i've
created. I am using some of the basic mm_ scripts (for image
swapping etc) which i have moved to an external .js file which is
linked to the template i'm using. There are no scripts that exist
in the head of the document except the linked files.
The weird behavior happens when i make a change to the
template and then update files site wide ("update all pages" when
saving)....Dreamweaver inserts all the mm_ scripts that i placed in
the external .js file into the heads of the updated files that use
that template.
Now to make things even more confusing, if i update
individual pages by using modify>update current page, the page
updates correctly.
I also have 2 different templates that also access that
external .js file, but neither of them have the same weird updating
problem....
any thoughts?
-AK> any thoughts?
It's a known behavior in earlier versions of DW. Which are
you using?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sparkdesigngroup" <[email protected]> wrote
in message
news:e6jq81$s57$[email protected]..
> hello all,
> I've got some weird behavior happening with a template
i've created. I am
> using some of the basic mm_ scripts (for image swapping
etc) which i have
> moved
> to an external .js file which is linked to the template
i'm using. There
> are no
> scripts that exist in the head of the document except
the linked files.
>
> The weird behavior happens when i make a change to the
template and then
> update files site wide ("update all pages" when
saving)....Dreamweaver
> inserts
> all the mm_ scripts that i placed in the external .js
file into the heads
> of
> the updated files that use that template.
>
> Now to make things even more confusing, if i update
individual pages by
> using
> modify>update current page, the page updates
correctly.
>
> I also have 2 different templates that also access that
external .js file,
> but
> neither of them have the same weird updating problem....
>
> any thoughts?
>
> -AK
> -
Dreamweaver template update ftp files without synchronizing
Today I change Template - Update all files based on the template - synchronize entire site.
What I Like to do: change Template - Update all files based on the template
and then in the same window button with ftp upload changed files!
Why do I want this:
The synchronization can take time on big sites, I have cms and billing system on my site with many files.
The synchronization can take time on slow connection.
When the time betwen two synchronization is to small Dreamweaver select all files (or many) for synchronization. I do not know if this is only my problem (maybe there is different time on my computer and the server?).
Do we have solution for this today?
Or can this be something to suggest for next version?
Thanks for any suggestionNot sure if there is anything set up in DW yet, it does give a status window of what files were updated, you could possibly work backwards form that list (still a bit cumbersome). I also believe that if you change the template and upload it to your server, it will prompt you as to whether or not you'd like to "include dependant files", and (in theory) it will also upload the files linked associated with it... but that may need to be tested to see how well it works on a larger site.
As a possible alternative, you could use "Server Side Includes" - which is a single file which contains a portion of your page (the top navigation, footer area, etc.), and any page that uses this element will automatically update when you upload just that one element. Here is a link which explains it better: http://www.smartwebby.com/web_site_design/server_side_includes.asp and there are several others on the web that offer more detailed explainations - one caveat is that the web server you use would need to be set up to accept SSI... most do, but something you'd need to look into beforehand...
Hope that helps,
Jesse -
Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous. The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.
my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer. -
Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico -
LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi 32 KBYou have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png 10 KB -
also with the update problem it says software update and below the running bar it says connecting to the server
Please do the following:<br><br>
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
#Finally run the installation file you downloaded to the desktop earlier.<br>
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation. -
Template Update on Remote Server - How To?
When I make a change to my template, I get the popup window
that allows me to update the entire site or just files connected to
a template. But, that just updates files on my local computer.
I'm accessing the template file on the remote server and have
that open on my desktop. But, the template update just applies to
my local files.
So, how do I get the template to update to all related files
on my remote server?That would be correct. Templates have no function on the
server. Never
have.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ken Binney" <[email protected]> wrote
in message
news:e5id72$gv1$[email protected]..
>I don't use templates, but I am under the impression that
your template is
>NOT uploaded to server, but remains on your local
machine.
>
> When you update your child pages from the revised
template, you then
> upload only the updated child pages to the server.
>
>
>
> "feezle" <[email protected]> wrote in
message
> news:e5iamm$e5e$[email protected]..
>> When I make a change to my template, I get the popup
window that allows
>> me to
>> update the entire site or just files connected to a
template. But, that
>> just
>> updates files on my local computer.
>>
>> I'm accessing the template file on the remote server
and have that open
>> on my
>> desktop. But, the template update just applies to my
local files.
>>
>> So, how do I get the template to update to all
related files on my remote
>> server?
>>
>
> -
I'm doing our company badges in Illustrator. I've created a template with 12 badges on one page. The only thing that will need to change for each badge is the name and photo. Then every year, alls I need to update is the expiration date. If I open this template, save as a new file, make changes to the template, will the file that utilizes that template update (like a template in Dreamweaver does)?
Thanks
EDIT: Just tested, doesn't work, I wasn't thinking clearly...duh opens a new document when opening that template. So I guess my question then is what is the best way to do this.Hello Tanya,
What you can do to update all the dates on the ID cards you can do the following:
Main Menu: "Edit" + "Find and Replace"
In the "Find" field enter the old date
And in the "Replace With" field enter the new date.
Finally select "Find" + "Replace All" + "Done"
In my versions of CS3, this fields of "Find and Replace" window are saved until your quit the program. In other words, you can open all the ID documents and the old date and the new date will be already set for you to just select "Find" + "Replace All" + "Done"
I hope this helps. -
10.5.7 update problems
After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?
jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different. -
Cache update problem in Integration Directory
Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack NusonHI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh -
Hello
How do i solve problem when i'am doing my update from 5.1 to 6.1.2 the massage (3194) occured. Please help me to solve this update problem.
I'am using iphone 4See this support document http://support.apple.com/kb/ts4451
-
im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?
Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.
Maybe you are looking for
-
How do I get my Macbook Air to display on TV. I have the Apple TV
How do I get my Macbook Air to display on TV ( i have Appple TV divice)?
-
System Information Not Working Correctly
I have a MacBook Pro Retina 15" (Mid-2014) running OS X 10.10 (Yosemite). When accessing the System Information utility, details about the hardware does not show up correctly or not at all. This only happens when accessing System Information using
-
White Screen of Death (after restoring)
Guys, I've been dealing with the White Screen of Death, but it was always solved by turning it off/on, or restarting it. The white screen used to happen when leaving my iPod for 3 days without using it. However this time, 4 days passed without touchi
-
Usage of export , import tools in SAP 4.6C
Hi Gurus, Can you please guide me how to do sap data export & import in 4.6C version? Kindly guide me how to documents and also any related blogs on this. Siva
-
How to Test Cliams Work Flow during run time in SWDD Tcode
Hi Gurus, I want to test my Claim Work Flow(WS99900044) in SWDD Tcode by Hard coding values to Work Flow Container Elements. How can I do this, kindly pls advice me.