Template working in prod and not in dev

folks,
I have a report where i use a etext template..
I have same query in dev and prod..same template and even xml is identical..But when I view output as text in prod server, it works fine..But in dev server its showing blank. That too when viewing output type as "text". CSV and XML types work but not "text".
I tried to view output Through "Template Viewer" on desktop. I was able to view it. But only when trying to view on server, it is returning a blank report.
Is there any server property I need to set for etext templates?
Prod version and dev version of BI publisher is also same: 10.1.3.4.1
any ideas..

Hi,
use the analysis function for plan cost estimates. You can start the report by entering the code SUR in the OK code field on the result screen of the cost estimate. See SAPNET note 428340 for details.
best regards, Christian

Similar Messages

Objects Exist in Prod but not in Dev - how to Delete?

Hi All,
I have recently taken over a system and I am doing some clean up of process chains which are failing and not needed anymore.
I have noticed that there are objects like DTP and Transformation in Production for an Infocube in-active in production that have a different technical name in the Development environment.
When I activate the objects in Dev and transport them through it does not work as presumably the objects have different technical names, my transport seems to do nothing.
I am now looking at deleting the objects from production and then transporting through new Active DTP and Transformation so that both systems are in Sync but because the objects are in prod and not in Dev I cannot delete them with a trasnport.
Same with my Process chain it is in production and I want to delete it but when I delete it in Dev and transport through to prod it does not delete.
Help please

Hi,
For deleting DTP :
Execute the RSBKDTPDELETE report. As of NW 7.0 Support Package 08, this report exists in your system, before this, you must use Transaction SE38 to create it and copy the program text from the correction instructions. The report requests the ID of the DTP that is to be deleted.
Caution: You should execute the report only if you cannot delete a DTP using the normal procedure. The report does not check whether the DTP may be deleted, for example if this DTP has already been used to load delta requests and if a deletion would invalidate the delta administration.
For deleting ProcessChain :
For deleting process chain, we will have access in the system. If not, tey to transport the chain again.
Deleting process chain is not an issue i guess.
Hope this helps.
Thanks and Regards,
Srinath.

Why does my php export feature work in IE and not firefox?

Why does my php export feature work in IE and not Firefox? I've written a web application which contains a SigmaGrid. The grid controls reload, add update delete, print and export to csv all work in IE8. The export feature does not work in Firefox.

I'm not sure what's going on for you. I've had 4 other developers - two on Comcast and two on Fios review my work and they get the control and export action in the IE8 version but not the FF10 version.
Thanks for looking into this for me, though. I appreciate the effort. '' The operation was a success doctor, but the patient died.''

Quicktime plugin works in IE and not in safari

Hello,
I'm using Safari 2.0.1 for browsing the web. I'm on Tiger 10.4.2 and have QT7 pro.
Firewall is set to let Quicktime streaming pass through.
the following URL is extract from the allocine web site witch is the french movie portal.
http://www.allocine.fr/video/generation.mov?u=rtsp://a1622.v09806.c980.e.vq.akamaistream.net/7/1622/980 /41891159/quicktime.allocine.fr/nmedia/18/35/52/34/18397590_fa1_vosth.mov
under safari I've got the big blue Q and that's it. On IE it works fine.
Moreover on safari the end of the URL (beginning at RTSP) open quicktime player.
Sound to me like a bug but can't be sure.
You can check at www.allocine.com click on a movie and try to watch a trailer ("bande annonce" in french).
Moreover High definition trailer works fine on this site with quicktime....
really strange
maxime
just an add on : Trailers on apple web site works fine

Sorry but already done that. Quicktime is set to RTSP and SDP in the mime settings...
A person in the french forum got the salme problem than I and install IE. With IE he can got at allocine web site..
I'm convinced it's something to do with the HTML interpreter but can't point out.
On Safari the plugin seems not starting so I assume it's not the connexion and can't see why it would works under IE and not safari in this case...
Please, I don't want to why IE, get my Safari back to work on allocine web site with quicktime
maxime

Why is my airportxpr only working with Itunes and not with another music program

why is my airportxpr only working with Itunes and not with another music program??
I can not select/see other outputs in my sound selector.

You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
for Windows - http://rogueamoeba.com/airfoil/windows/
for Mac - http://rogueamoeba.com/airfoil/mac/

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

HT3412 impossible to download my book ! I-photo 11 worked last month and not anymore.Download stops in the middle.

I-photo 11 worked last month and not anymore.Download stops in the middle.I have to shut MAc down and restart to debug.
What's wrong ?

Here's a fix that worked for some users:
Make sure this checkbox is checked in the System/Sharing preference pane:
If it is, uncheck it and then recheck and try ordering again.

Ipad screen went white with gray/black line through it. Worked one minute and not the next. It has not been jailbroken.

The ipad screen has went white and has a gray line running through the middle of it. It worked one minute and not the next. It has not been jail broken.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

Bitmap Index Not Used in PROD and used in DEV

I am in a situation where in in DEV Bitmap Index is used and in PROD bitmap Index is not used. I checked the count, in PROD I have 10 mil rows and in DEV I have 16 mil rows. Optimizer is CHOOSE and also when I tried to force to use index in PROD, I got higher cost.
Any suggestions why Index is not used in PROD as opposed to DEV

As other says, no guarantee that the same query with same setting OS, ORACLE to produce the same execution plan. Also, as Justin said, dont every take cost as your tuning parameter, pay attention to response time, also, number of logical reads and physical reads. What are the wait events during?
For an index, most important factors are, blevel, clustering_factor, number of distinct values. Clustering actor make a lot of difference. You said, when you force index to use, your performance has gained. If so, why not, why the HINTS there in place? Go ahed and use it, but, after all the R&D. Are the Optimizer* paraemters same on the both databases?
If possible, post the execution plan of the query, with HINT and without HINT as well.
Jaffar

My facetime and imessage are not working! They were literally were working one minute and not the next! I have reset (NOT RESTORED) my ipod, however these 2 apple apps are not working now, anyone have any idea why???

My ipod touch seems to have a few issues, however my pre-installed and updated imessage and facetime were literally working last night, and after a breif break to charge battery (the back of the ipod was SUPER HOT) wasn't able to do facetime or imessage, and am STILL NOT today, what gives?? Any suggestions and advice?.

Found the answer, at least for now! Thanks to roryjt, and having to search through tons of post on imessage and facetime issues! Changed the DNS on my ipod for my wireless network to 8.8.8.8 Not sure if it will work outside of my wireless network, but since its an ipod, not an iphone, I usually only use it in my place/on my network. Below is a link to the thread by roryjt.
https://discussions.apple.com/message/16674964#16674964

Set Empty Managed Metadata Column - Working in 2010 and not in 2013

I have seen posts similar to mine below but am still not finding a solution. I understand that setting an already populated managed metadata column can be problematic using SPD. However, my column is empty, and what works in 2010 is not working in 2013.
Issue: In SharePoint 2010 On-premises, I am able to set an empty Managed Metadata column on a file in a document library via SPD workflow using the following format:
ID;#Term|IdForTerm
In SharePoint 2013 Online, I am attempting to create a SPD workflow to do the exact same thing (ID;#Term|IdForTerm) and am experiencing the following results depending upon the type of workflow I try:
- SP 2010 Workflow - The workflow status result is Completed, but the managed metadata column remains empty.
- SP 2013 Workflow - The workflow internal status becomes Started and effectively remains this way until I end the workflow.
Any thoughts on what needs to change for 2013 when doing this?
Thanks in advance for any help or guidance.
Alan

Hi,
I try to reproduce the issue in my SharePoint Online environment, however, everything works well.
I create term set as below:
Then start the workflow and the value in the browser view. The result is as below:
I recommend to create another managed metadata column to check whether it works.
Or you can create another library to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Spry:repeat works in Mozilla and not IE 6

I made this little test in Spry.
It happens to work in Mozilla but not in Internet Explorer 6
which is quite weird since I almost copy/pasted from one of the
included examples (the example worked fine everywhere).
Can anyone point me in the right direction please?
Thanks...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<title>Club voleibol bargas</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<script language="JavaScript" type="text/javascript"
src="scripts/spry/xpath.js"></script>
<script language="JavaScript" type="text/javascript"
src="scripts/spry/SpryData.js"></script>
<script language="JavaScript" type="text/javascript">
var dsNews = new
Spry.Data.XMLDataSet("scripts/xml_noticias.php", "/allnews/news");
</script>
</head>
<body>
<div spry:region="dsNews">
<div spry:repeat="dsNews">{header}</div>
</div>
</body>
</html>
The XML needed for this looks like this:
<allnews>
<news>
<id>26</id>
<header>Morbi mauris.</header>
</news>
<news>
<id>23</id>
<header>Lorem ipsum dolor sit amet</header>
</news>
<news>
<id>8</id>
<header>Proin convallis. Duis sed est ut ligula
ullamcorper bibendum.</header>
</news>
</allnews>

I spent days trying to figure it out and the minute I post it
here the solution comes to me!
The problem was that the XML file was being generated by a
PHP script which was not outputting the appropriate headers.
You can use:
header('Content-Type: text/xml');
Or use this other one if your charset is NOT US-ASCII:
header('Content-Type: application/xml');

A puzzle I made in Adobe Flash on an html5 canvas only works in Firefox, and not in other browsers. What should I do?

I made a puzzle on a html5 canvas in Flash CC, and followed the exact steps of an online tutorial. The final product works in Firefox, but not in Chrome or Internet Explorer. What am I doing wrong?

Call up the Javascript Console in Chrome and see if it's showing error messages.
Also, you might try uploading it to a web server and viewing it from there (or turning Apache on locally). It may be a cross site security issue.

Ipod Touch works with APPLE and not WINDOWS

I have a first generation touch. Yesterday the PC crashed while syncing with the iTouch. After that it would not see the iPod any longer. However the APPLE I have sees it just fine. I have gone through the detailed uninstall and re install itunes process several times and tried cleaning the registry - still nothing http://support.apple.com/kb/HT1923 .
The PC based iTunes syncs with another 2G and a nano and a shuffle just fine. Windows also sees the 1G Touch..... ideas other than moving my library to my laptop? I have also reset the 1G and upgraded the software now to the latest firmware. It still works with the APPLE but not with the PC. I am sure this is a driver issue but I cannot get it fixed.

Well I happened on the answer after doing a lot of searches. Why doesn't apple post the fix on their site. This problem is due to their installation package for Vista and the fix does not require all the uninstalls and re installs you have been asked to do so many times....
THANK YOU BeeBopp
Posts: 3
From: USA
Registered: Feb 15, 2009
Re: Ipod touch is recognized as a camera
Posted: Feb 16, 2009 7:43 AM in response to: Twin195 Reply Email
This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.
Here are the steps:
1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
2. Log in using an ADMINISTRATIVE account
3. Single left click on START
4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)
5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)
6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)
7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)
8. Right click on " Apple iPod " then single left click on Properties
9. Single left click on the " Driver " tab
10. Single left click on " Update driver "
11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista
12. Single left click on " Include this location in the search " if shown
13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "
14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.
15. Hopefully you will get a successful message.
16. The correct drivers(s) are now installed.
17. Start up iTunes, and see if you iPod is detected again.
Hope this works for you as it did for me and several others.

Serial works in LabView and not in C++

Hey,
I’m using Qextserialport 1.2 alpha in my project. (QT C++ programing)
I got invalid data when I use other windows application while I’m recording the data at hight rate of 400hz.
BUT, when I first open the port via HyperTerminal or LabView and then I connect throw my SW, the problem is vanished.
The problem doesn happend in low rate (1h,10h)
Any Idea?!?
port = new QextSerialPort(portName,QextSerialPort::EventDriven);
if(!port->open(QIODevice::ReadOnly )) {
qDebug("Cannot open serial port: %s Error: %s",
portName.toAscii().constData(),
port->errorString().toAscii().constData());
return -1;
connect( port, SIGNAL(readyRead()), this, SLOT(onReadyRead()));
port->setBaudRate(BAUD921600);
port->setDataBits(DATA_8);
port->setParity(PAR_NONE);
port->setStopBits(STOP_2);
port->setFlowControl (FLOW_OFF);
port->setRts( true );
port->setDtr( true );
My setup:
Win XP sp3
QT 4.7.0
Thanx!

Thanks for your replay.
I'll try to be more clear about what I mean in "windows application".
While I'm recording data with my SW, each change that happened i.e. maximize or minimize the SW window or opening other document can damage the recording data.
This doesn't happened when I first open the LabView SW then connect and disconnect from the serial comport.
And then open my SW, connect the serial port start recording data and I can maximize or minimize the SW while recording and it won't damage the record.
P.S. I need to record the data with my SW and not with LabView.

Template working in prod and not in dev

Similar Messages

Maybe you are looking for