Templates for pages any suggestions for best app around??

I am looking for the best app for additional templates for Pages for my Mac Computer.  I have looked at many different apps but some are really expensive & others are free.  Some have no customer rates and some have terrible rates.  Does anyone know of any reasonably priced???  

That is so specific, just google it and use any Word template you find.
Peter

Similar Messages

  • Any suggestions for good free web hosting service for my IWeb page, other than MObileMe

    Any suggestions for good free web hosting service for my IWeb page, other than MobileMe?

    MobileMe is not free.
    Search : free webhosting
    You can narrow the results by being more specific by adding town, province or country.
    You can also start by checking out your own ISP.
    Or be free as in here : www.000webhost.com
    Here's mine : http://dailynews.webege.com/

  • Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

           I'm getting a lot of pop up ads. mostly while using  Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
          I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
         Thanks
         Ron

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

    My computer is functioning really slowly since downloading Mavericks. My programs lag opening if at all. Any suggestions for fixing this?

    I installed it maybe 2 weeks ago, Here are my results:
    Hardware Information:
        MacBook (13-inch, Late 2009)
        MacBook - model: MacBook6,1
        1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
        2 GB RAM
    Video Information:
        NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
        OS X 10.9.2 (13C1021) - Uptime: 0 days 22:44:15
    Disk Information:
        TOSHIBA MK2555GSXF disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted>: 209.7 MB
            Marshmallow (disk0s2) / [Startup]: 249.2 GB (125.02 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information:
        Apple Inc. Built-in iSight
        Apple Inc. Apple Internal Keyboard / Trackpad
        Logitech USB Receiver
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
    Gatekeeper:
        Mac App Store and identified developers
    Kernel Extensions:
        [kext loaded]    at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
        [not loaded]    com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
        [not loaded]    com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
        [not loaded]    com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
        [not loaded]    com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
        [not loaded]    com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
        [not loaded]    com.mobile-stream.driver.EasyTetherUSBEthernet (1.0.4 - SDK 10.4) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
        [not loaded]    com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
    Launch Daemons:
        [running]    at.obdev.littlesnitchd.plist Support
        [running]    com.adobe.ARM.[...].plist Support
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.adobe.versioncueCS4.plist Support
        [running]    com.autodesk.backburner_manager.plist Support
        [running]    com.autodesk.backburner_server.plist Support
        [failed]    com.autodesk.backburner_start.plist Support
        [loaded]    com.google.keystone.daemon.plist Support
        [running]    com.motorola-mobility.mmcfgd.plist Support
    Launch Agents:
        [running]    at.obdev.LittleSnitchUIAgent.plist Support
        [loaded]    com.adobe.CS4ServiceManager.plist Support
        [running]    com.Affinegy.InstaLANa.plist Support
        [loaded]    com.google.keystone.agent.plist Support
        [loaded]    com.motorola.MDMUpdater.plist Support
        [running]    com.motorola.motohelper.plist Support
        [loaded]    com.motorola.motohelperUpdater.plist Support
    User Launch Agents:
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [running]    com.akamai.single-user-client.plist Support
    User Login Items:
        iTunesHelper
        Skype
        Dropbox
        Android File Transfer Agent
        GrowlHelperApp
        TWC-WiFi Menu
        KiesViaWiFiAgent
        KiesViaWiFiAgent
        fuspredownloader
    Internet Plug-ins:
        o1dbrowserplugin: Version: 5.3.1.18536 Support
        Default Browser: Version: 537 - SDK 10.9
        AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 Support
        FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
        DivXBrowserPlugin: Version: 2.1 Support
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
        Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.3.1.18536 Support
        iPhotoPhotocast: Version: 7.0
        AdobePDFViewer: Version: 11.0.02 - SDK 10.6 Support
        CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
        DivX HiQ: Version: 2.1.1.94
        DivX Plus Web Player HTML5 <video>: Version: 2.1.1.94
    Audio Plug-ins:
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
        fbplugin_1_0_3: Version: (null) Support
    3rd Party Preference Panes:
        Adobe Version Cue CS4  Support
        Akamai NetSession Preferences  Support
        Flash Player  Support
        Growl  Support
    Time Machine:
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Marshmallow: Disk size: 232.09 GB Disk used: 115.65 GB
        Destinations:
            Patrice [Local] (Last used)
            Total size: 465.44 GB
            Total number of backups: 42
            Oldest backup: 2012-07-09 21:31:08 +0000
            Last backup: 2014-04-28 23:46:05 +0000
            Size of backup disk: Adequate
                Backup size 465.44 GB > (Disk used 115.65 GB X 3)
        Time Machine details may not be accurate.
        All volumes being backed up may not be listed.
    Top Processes by CPU:
             5%    WindowServer
             3%    plugin-container
             1%    firefox
             0%    ps
             0%    Dropbox
    Top Processes by Memory:
        381 MB    firefox
        86 MB    plugin-container
        51 MB    Finder
        39 MB    WindowServer
        33 MB    softwareupdated
    Virtual Memory Information:
        30 MB    Free RAM
        548 MB    Active RAM
        523 MB    Inactive RAM
        363 MB    Wired RAM
        1.04 GB    Page-ins
        151 MB    Page-outs

  • HT201272 I have deleted a song from my library and want to re-download it.  When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?

    I have deleted a song from my library and want to re-download it.  When I access my purchased items in the iTunes store, the song has the 'purchased' button next to it and won't let me re-download. Any suggestions for things to try?

    While you can redownload most past purchases without charge, you can't redownload movies without paying again.  See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

  • Any Suggestions for CGI Script for Web Slide Slow?

    Do you have any suggestions for creating a slideshow for my web site, 6 same-size jpgs that rotate automatically?
    I think I prefer a cgi script. However, I've tried two that don't work on Firefox or Safari. One developer tells me that he can see the rotating photos.
    I'm also open to software to create this. However, I'd prefer to use html code.
    Of course, it must work cross platform.
    Any suggestions?
    G5 Quad; Mini Mac; PowerBook G3; iPods   Mac OS X (10.4.8)   Using Dreamweaver 8

    Oh, what a beautiful baby! Is he/she yours?
    She is mine. At least that's what the Mrs. tells me!
    When you say gif, I am assuming that you mean the
    format really must be gif and not jpg. Is that
    correct?
    Yes, the file is a GIF file. It's actually an animated GIF file, meaning that the images that you see are all frames of animation in a single GIF file. There are a lot of apps out there that can create animated GIFs. I happen to use Adobe ImageReady because that is what is on the hard drive.
    Can you give me a hint about the dithering issue? Do
    I dither or not dither, that is the question.
    This is the major downside of the GIF format. It is a really old format...from back in the CompuServe bulletin board days...maybe older. Anyways, it is my understanding that GIFs can only hold information for 256 colors....any 256 colors, but no more and no less. So now in the days of "millions of colors" jpegs, you can imagine that a 256 color palette is limiting. But if the colors of your images are sufficiently close, its possible that 256 colors makes for perfectly acceptable images across all images. This is the one variable of converting images to GIF that can make it or break it for you. If your image has a pretty broad tonal range...like fleshtones or any other gradient...then 256 colors is going to represent things poorly. Then you will get dithering artifacts which is like averaging errors...colors are close...as close as possible...but not close enough to make a smooth gradation. Anyways, that's my layperson's understanding.
    But for some images, it looks just fine.

  • HT204406 I attempted to download iTunes match w/o success.  Step 1 was fine.  Step 2 gets stalled and will not move beyond 80%...  Any suggestions for a solution?  Why is iTunes stalling on step 2?

    I attempted to download iTunes match w/o success.  Step 1 was fine.  Step 2 gets stalled and will not move beyond 80%...  Any suggestions for a solution?  Why is iTunes stalling on step 2?

    Hi folks,
    I found a solution in case your MATCH is still buggy...
    JUST BOOT YOUR MAC HOLDING THE SHIFT KEY (until you see a progress bar).
    Then in itunes disable and re-enable iTunes Match.
    It should rescan all your library and eventually works.
    At the end just reboot your Mac normally.
    Best regards from Paris.
    Nico

  • HT203167 I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them d

    I downloaded two movies from itunes at the same time (both free digital copies from a dvd) and when they finished downloading... they disappeared. I've not been able to re-download them or find them.. anywhere. Any suggestions for tracking them down?

    If you downloaded them on your computer's iTunes then they should have gone into the Movies part of your iTunes library, if on a device (iPad, iPhone or iPod Touch) then into the Videos app - they haven't appeared there ?
    If you downloaded on your PC and they don't show in the Movies section then you could try searching for them by name (or part of their name) via windows explorer and see if that finds them. Or if you downloaded them on a device and they aren't in the Videos app then have you got a film age rating set in Settings > General > Restrictions that is hiding them, and if not can you find them via the device's spotlight search screen (swipe your first homescreen to the right) ?

  • Any suggestions for an all-in-one "cable modem router print server" (N)

    any suggestions for an all-in-one "cable modem router print server" (N)?

    If that's a problem with your cable company, change the company.
    If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
    If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
    If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
    In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
    You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
    It's like the all-purpose audio device compared to components...

  • Any suggestions for 3G service in Kenya?

    Any suggestions for 3G service in Kenya?

    If that's a problem with your cable company, change the company.
    If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
    If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
    If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
    In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
    You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
    It's like the all-purpose audio device compared to components...

  • Any Suggestions for Bus/Aux, Sub/Stems Organization, Naming?

    Hello Fellow Macers!
    Using Logic Pro and learning step by step using Logic Pro 9 Manual. When it comes time to mix your first song (see pg 758: "Understanding The Basic Mixing Stages") under "Stage 1 Making Preparations" the manual suggests that you define some logical channel strip groups, grouping tracks, for example, roughly by type (drums, guitars, keyboards, eg.) in order to link their parameters so that you can adjust the whole group at once. My question is what is the best layout or organization to do this. Is it to select all your drums, create a group "Aux" Channel strip, name this group "Drums, and then assign all sends of this to  Bus 1?
    If that makes sense, then does it also make sense so set up a standard convention for Bus assignments for those Auxillary Channel Stips that you create, like below....
    Bus 1 > Drums
    Bus 2 > Percussion
    Bus 3 > Bass
    Bus 4 > Guitar
    Bus 5 > Keyboards
    Bus 6 > Orchestral
    Bus 7 > Backup Vocals
    Bus 8 > Wet
    Bus 9 > Dry
    etc, etc....while creating other Groups and assigning Buses for those...e.g.
    Bus 20 > Strings
    Bus 21 > Horns
    While perhaps also using Buses 30-40 for grouping EFX, eg., ....
    Bus 30 > Tape Delay
    Bus 31 > Instrument Reverb
    Bus 32 > Snare Reverb
    Also, would 20-40 above be considered Stems, or submixes, or
    FYI, This article, together with going through the manual, got me thinking on this subject:
    http://logicblog.info/logic-pro-blog/2011/12/03/tips-on-organizing-and-bouncing- aux-buses-in-logic-pro.html
    Also, any suggestions for a color convention to help organization, easy identification?
    Hope this makes sense and I appologize in advance if it doesn't. Feel free to set me straight, ask for clarification, etc.
    Thanks!!
    Erniesfo

    looks like your database is in a deadlock situation. check you logs and try finding out where the deadlock is occuring.
    regards
    shyam

  • Does anyone have any suggestions for password protecting e-mail on the i pad?

    Does anyone have any suggestions for password protecting e-mail on the i pad?  Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
    Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.

    Skydiver...that did it!!  I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!!  I had called Apple Care and had asked  different peope in Apple stores about this and no one but you had any suggestions!  YAY!!  Thanks!!!

  • I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    I started to have connectivity issues with a linksys router.  The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

    Hi RonWM,
    Thanks for visiting Apple Support Communities.
    This article lists the ports that are used by the Apple TV:
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Best Regards,
    Jeremy

  • I recently replaced the hard drive in my computer.  I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano.  Any suggestions for solutions?

    I recently replaced the hard drive in my computer.  I am afraid to download and reinstall itunes again because I worry about losing all the music I had on my iPod Nano.  Any suggestions for solutions?

    The dragging does not work:
    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - For other music you will need a third-party program like one of those discused here:
    Copy music
    - Connect the iPod to your compouter and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from that backup
    Nothe that the backup that iTunees makes does not include synced media like apps nd music.

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

Maybe you are looking for

  • DBConnect with SQL Server

    Hi, we have a dbconnect source system with sql server. The installation is correct and we have the list of tables and views. We can get a list of table/view content too. But, when we make an infopackage request there is no idoc generated and the stat

  • Can't see photos in library

    Yesterday my computer offered me an update to iPhoto and said that the thumbnails needed to be upgraded (or something along those lines). I clicked yes, and then I think foolishly, imported some more photos whilst this was occuring (I assume. I didnt

  • How to change font size in jquery fancybox

    I'm using the fancybox to get pop ups when I want to give more information about a subject. It works great, but in my opinion the font size is not big enough. I tried to ad: #fancybox-content {           font-family:Gotham, "Helvetica Neue", Helvetic

  • How to push Process model to design model?

    I just learned how to capture business requirements and a logical design using the logical data modeler and process molder to create data flow diagrams, with composite, primitive and transformative processes in SQL Developer 3.0 I know in Oracle Desi

  • Using Quick Look with Spotlight

    I was wondering if there was any way I could find files of a certain name and then, while still in the spotlight menu, use quick look to get a glance at them. I have a ton of pdf's and use spotlight to find the authors name (name:author) and then I h