Templates - how to tell what target is using what template

Trying to figure out who or what target is using what monitoring template? Anyone can suggest a way? Are only groups use monitoring templates?
Thanks
Roman

Hi,
As far as i know, you can find out this. Monitoring template is a template which you create and then apply to targets (so that you avoid setting metrics for individual targets one by one). You can apply a template on a single database or on a group by adding all databases in a group. Once you apply template, template metric thresholds will be set for that target based on the template and still you can modify certain metrics for this target. So it means that on a single target you can have metric set through template and also set manually thus it is not possible to find out what was implemented through template and what was done manually.
Salman

Similar Messages

  • How do I find out what program is using what port?

    Hi
    I would like to know what program is using what port? I would also like to know how to close a port. I did a port scan and these ports were open:
    Open TCP Port: 1033 netinfo-local
    Open TCP Port: 20221
    Open TCP Port: 20222 ipulse-ics
    Open TCP Port: 20223
    Open TCP Port: 20224
    Open TCP Port: 20225
    Open TCP Port: 20226
    Open TCP Port: 20227
    Open TCP Port: 20228
    Open TCP Port: 47807
    I am using netbarrier on my computer.
    Thank you for your help.
    iBook G4   Mac OS X (10.4.8)  

    This document may help with your first question:
    "Well known" TCP and UDP ports used by Apple Software Products
    This IANA listing of the port numbers is also useful, if more detailed.
    You can use the Sharing tab of System Preferences to configure the firewall to block all ports except for those specified; you can use the command-line ipfw utility to set up more detailed firewall configurations.
    Matt

  • When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying

    When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying?

    Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
    Peter

  • Please materials about what condition we use what type of IDOC types and me

    Hi all:
         are there any materials about what conditions we use what  IDOC types and what messsage types?
    would you please give a me a hint ?
         Thank you very much!!!

    Hi
    Check below thread for IDOC
    http://****************/Tutorials/ALE/ALEMainPage.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
    Regards,
    Syf
    Edited by: syfulla shaik on Aug 18, 2008 1:09 PM

  • Fan how to tell if it works? What test can I do? G62-a17SA

    G62-a17SA
    HP G62-a17SA
    Windows 7 64 bit
    How to tell if the fan works? it works when Laptop powered up, but no other times.
    I've had it less than a year, and customer services, wont fix it unless I mail the receipt, which I cant find. i called the next day and said I will pay for it to be looked at, and replaced if needed. The price was £223.94. Which is 51% of the price I paid for the laptop originally, so I left it.
    I need to know if my laptop is save to use. It can get hot, I'm worried it could start a fire. The fan only comes on when I boot the laptop up, no other times. What software can I use to tests to see if it functions properly? then I know if i will have to pay to send it away. (not a dust or venting problem) also its a instant sudden one
    Please help
    Oliver
    This question was solved.
    View Solution.

    HP G62-a17SA
    Windows 7 64 bit
    How to tell if the fan works? it works when Laptop powered up, but no other times.
    I've had it less than a year, and customer services, wont fix it unless I mail the receipt, which I cant find. i called the next day and said I will pay for it to be looked at, and replaced if needed. The price was £223.94. Which is 51% of the price I paid for the laptop originally, so I left it.
    I need to know if my laptop is save to use. It can get hot, I'm worried it could start a fire. The fan only comes on when I boot the laptop up, no other times. What software can I use to tests to see if it functions properly? then I know if i will have to pay to send it away. (it's not dust or venting problems)
    Please help
    Oliver

  • How to tell AE CS6 to use bundled Mocha rather than Pro?

    I recently upgraded my bundled Mocha from AE CS6 to Mocha Pro 4, but for some unknown reason, it won't let me export shape data in Mocha.  There seems to be no data at all, as even trying to paste in Notepad results in nothing.  Tracking data, however, works fine (both in AE and Notepad).
    Since I cannot figure out any solution in Mocha, the only thing I can do is use bundled Mocha rather than Pro... but I do not know how to tell AE to use bundled Mocha rather than Pro when I click 'Track In Mocha' (...a setting which was changed when Pro was installed).
    Does anyone know where/how I can switch it to Mocha bundled when you click on Track In Mocha?  (or, does anyone have any idea why Pro would not export shape data, whereas the same project in bundled Mocha did?)
    If anyone has any answers or theories, please let me know ASAP, as I have a project I'm trying to complete, and (as luck always has it) the weekend is now upon us, and support is closed over the weekend.

    I tried connecting MBP and TC via Ethernet - after verifying the settings that you suggested - and it does not work: if I turn Airport off, Time Machine says it can't find the TC
    Any other sugestions?
    Ok, then ethernet is not getting an ip address from the TC and is plugged in wrongly..
    You still didn't give me any idea of what actual model the linksys is.. and why is it in the network.. Is it a modem router?? If you have cable internet just throw it away and use the TC.
    If you have the linksys as modem, then bridge it.. turn off wireless and run pppoe client on the TC.
    If the ISP does not allow pppoe client mode then simply use the TC in bridge. Turn off all wireless in the linksys and just use the TC.
    Still need info on how everything is setup to analyse the problem.

  • How to tell PDDoc.Save() to use CombatibillityLevel 1.4?

    My application is using OLE to open PDF Files in Acrobat 9 and store them optimized for fast web access, again. Unfortunately, Acrobat stores the files as PDF 1.7 even if they were PDF 1.4 before.
    Is there any possibility to tell Arcrobat 9 to use PDF 1.4 (no matter if generall configuration or OLE command)?
    I´ve already tried to set the compabillty level in the distiller configuration but it seems, that PDDoc.Save always ignores these configurations.

    ok, thank you very much. It seems I have to look for a third party tool to convert my PDFs to PDFs with fast web access enabled. Just one last question: Is there a way to configure my Acrobat Installation to always save any pdf in PDF Version 1.4 (like the CombatibillityLevel Setting in Distiller)?

  • Internet security for new iMAC? What do I use, What do I get, is there any?

    I just bought a new imac and i've swapt over from the other side (pc)
    I can't find any info on internet security software for macs. I'm startign to wonder if it's a built in thing exclusive to mac and comes with the OS or something.
    If there is such a thing, what do I get, what are people using.
    any advice would be more than useful
    cheers, John

    Hello John:
    Welcome to Apple discussions (and welcome from the dark side).
    Breathe a deep sigh of relief. There are NO documented viruses that affect a Mac running OS X - none. I do not use any AV software. IMHO, it is a waste of money and system resources.
    OS X has a built in firewall (default is off). It is robust. I suggest you enable it. This is from the OS X help section:
    +Using a firewall to protect your computer+
    +Mac OS X includes firewall software you can use to block unwanted network communication with your computer. Using a firewall protects your computer from users on other networks or the Internet.+
    +In order to use Mac OS X services, such as personal file sharing, Windows sharing, or FTP access, you need to open ports in the firewall to allow traffic for that service to and from your computer. When you select a service in the Services pane of Sharing preferences, it is automatically selected in the Firewall pane, and the port is opened.+
    +To prevent that service while the firewall is on, turn off the service in the Services pane.+
    +To turn on firewall protection on your computer:+
    +Open System Preferences and click Sharing.+
    +Click Firewall, and then click Start.+
    +To block incoming traffic on ports used by one of the sharing services, disable that service in the Services pane.+
    +You can't edit the firewall ports used by built-in services. They are enabled and disabled automatically when you turn the corresponding service on or off in the Services pane.+
    +If you use iChat Bonjour, iTunes Music Sharing, or iPhoto Bonjour Sharing, make sure to allow those services in and out of your firewall. Turn on their services on the Firewall pane of Sharing preferences.+
    There are also no instances (that I am aware of) of spyware or malware.
    Bottom line, enable the firewall and enjoy a very fine piece of hardware that also has a first class software platform.
    Barry

  • Session logoff with new target url using BSP_MODEL template

    Hi,
    I implemented the session management pages as used in ITSM. However I had some problems when calling the application in a popup (somehow the deletion of the session appears also after the 2nd start of the app deleting all my created models)
    So I decided to try the slightly different pages from BSP_MODEL. Et voila problem solved.
    However I have this button with:
    onClientClick = "parent.exitBSPApplication( '<%= l_url %>');"
    So a new problem because this is not used in the BSP_MODEL default.htm.
    What did I do
    1. I added a parameter to the script like in ITSM
    function exitBSPApplication(newTargetUrl)
    2. Copied 2 lines from the ITSM script
    document.getElementById("FRAMESETID").onunload = null;
    window.setTimeout('{document.location.href="'newTargetUrl'";}', 750);
    This would do the trick I thought. However pressing the button results in going to the new target url, but sadly does not close the session.
    I already tried to delete the 'and application->counter = 0' but this is not working either.
    Any suggestions?
    Greetings,
    Vincent

    Vincent,
    It is important not to look directly at all the subtle different bits of code. Rather understand the big picture. Our test programs, for example ITSM and/or BSP_MODEL have different versions of the general principle. This just reflects different goals we wanted to achieve, etc.
    The minimum you need is a frameset with onUnload hooked, and then load you application inside this. You can even delete all of that loading stuff. Just fluff.
    With this, if the window (only IE!) is closed, the onunload will still terminate the session.
    The button is just to demonstrate an example of how to do this when you want an explicit logoff button in your application.
    One last important aspect: if you restart the same application, then they share the same cookie, and things go wrong! Effectively you can kill the new instance instead of the old one.
    Coming to TechEd?

  • How to tell if WiFi is used by apps and features t...

    Hi there,
    I just started to use the Nokia Lumia 800 Windows Phone.
    To discover the phone and all it's abilities I consume a lot of data from the internet (chat messages, photo's, websites etc.)
    My subscription with my phone provider is limiting the amount of data to 250MB. More data will result in extra costs.
    At home and WiFi hotspots, I connect using WiFi.
    I see on top the screen the 3G symbol as well as the WiFi symbol when connected.
    But my question is: How do I know for use that when I am connected to a WiFi server, it will download data from the internet using WiFi , rather then the 3G which will have impact on my MB usage of my subscription.
    Additionally: how can I see how many MB (data) I have consumed sofar..?
    Thanks for the help.

    "Additionally: how can I see how many MB (data) I have consumed sofar..?"
    This is not a function from what others have told me on here.
    To be honest its not a function on Android either.  However on Android there are a number of apps available that record useage.  Some of the better ones even turn off 3G when you get to your limit.
    I emailed the developer of the one I used on Android and he said he had no intention of developing any thing for Windows :-(

  • TS1702 my account will not take the security code on my credit card it tells me invalid code no matter what card i use what can i do i am not getting any help from apple

    can anybody tell me how to fix this problem every time i put in a credit card it tells me invalid security code no matter what card i use

    Why would you get help from Apple?  You need to contact your credit card company and find out why the security code is invalid.

  • How To tell ADF Framework to use my authenticated subject?

    Hi,
    let's say that I have a subject instance which is authenticated through Weblogic server. Now I want to use this authenticated subject to protect my resources using ADF Security. So how should I tell this to ADF framework programmaically. For example I can think of storing my principal and roles in some type of objects and store it in session in a format that's understandable by the framework. By understandable I mean ADFContext.getCurrent.getSecurityContext.isUserAuthenticated returns true, getPrincipal returns my authenticated principal. I appreciate your helps.
    Best Regards,
    Salim

    Hi Chris,
    I want to implement programmatic authentication. I was able to authenticate given the LoginModule (weblogic.security.auth.login.UsernamePasswordLoginModule), LoginContext (javax.security.auth.login.LoginContext) and a callback handler.
    try {
    loginContext.login();
    Subject subject = loginContext.getSubject();
    It authenticates successfully. But he problem is that it does not push authenticated subject into session. My guess is that there should be a way to configure application server to use this subject for the session. I understand that adf security just delegates calls to application server. I thought may be there is a way to do it with adf. Thanks for the reply.
    Best Regards,
    Salim

  • Can any body tell me when to use what Bean?

    Hi ,
    I am naive to EJB . I want to know when to use which bean . Pls quote with an example.
    Thanks in advance .
    Mahesh L.

    I would highly recommend picking up a book on EJBs
    Professional EJB - Wrox
    Enterprise JavaBeans - O'Reilly
    Mastering Enterprise JavaBeans - Sams
    These are all excellents books and will explain in great detail with sample code how to program EJBs

  • What would keep a file with text in templates from updating all the site pages using that template?

    I am using the trial version of DW and I have a file in Templates with a defined banner with moving text in it. I have subsequent pages for the entire site and the template file is part of each of those. when I want change some part of the file in template and then I save, each page is also changed. Or at least it did. I tried Windows and Apple with the same result. I am at a loss. I tried modify but that did not work either. I am missing something obvious.

    Did you check the code in your template.dwt file for errors?
    http://validator.w3.org/
    Did you save over or rename your original Template.dwt file?
    Did you move your Template.dwt file from it's Templates folder?
    Nancy O.

  • How do I import contact list using advanced template?

    I used to be able to do this - but don't seem to be able to see the option with the new interface. I originally downloaded the advanced excel template - it had more fields than the basic template available on the 'Import contacts' page.

    Hi
    I believe you are trying to import contacts in CRM,
    You just need to import the file through CRM > Customers > Advance Import.
    If you want to import only Email, Title, First name , Surname and company name you can go with basic import , else use Import contacts(Advanced)
    Regards,
    Sanjit

Maybe you are looking for