Templates/ovf upload
Hi,
How to upload templates/ovf files into vFabric Data Director "Base DB templates" .
The vFDD distribution includes .ova/tar files for the actual Data Director appliance and for 4 different Base VMs.
You deploy the Base VMs you want into the system resource pool you create. (The system resource pool will be used in the creation of the system resource bundle in DD)
The four templates are:
1) vpostgres 9.0 includes SUSE OS, vpostgres9.0 install and DD Agent components
2) vpostgres 9.1 includes SUSE OS, vpostgres9.1 install and DD Agent components
3) SUSE VM to be used for Oracle Install. Includes SUSE OS, DD Agent components and an install script to do a silent Oracle install from your Oracle binaries
4) Blank VM for use with RHEL/Oracle. Includes VM configured with correct vmdks and Nics. ISO with cfg to repack RHEL with needed kernel parameters and disk layout. Install script to do a silent Oracle install from your Oracle Binaries. The process is to use the cfg files to repack your RHEL binaries, do the OS install into this VM and then run the silent install for Oracle. This process is necessary because we cannot ship RHEL or Oracle with our distribution. The next release will simplify this by making it a UI driven process.
Similar Messages
-
Template for uploading account trial balance
Hi,
Is there any template for uploading trial balance of chart of accounts in SAP Business One.
Thanks in Advance.
Thanks and Regards,
Jaihi
Go in Financial > Financial Reprt Template > Choose balance Sheet
Create new template and Assign a Name
Click on "Generate Std Chart Of Account"
Update > Ok
Same for other template
Thanks
Kevin -
Can I reduce a Template image upload time to Azure RemoteApp ?
Can I reduce a Template image upload time to Azure RemoteApp ?
I want to reduce from 2 hours to 1 hour.
Today, Jan 14, 2015's upload time is over 2 hours.
Environment
Region : Japan West.
Vhd size: 43 GB
Upload Tool: Upload-AzureRemoteAppTemplateImage.ps1
Result
Elapsed time for the operation= 00:32:38
Elapsed time ffor upload = 01:48:29
Traffice rate = 58 Mbps
Regards,
Yoshihiro KawabataHi Yoshihiro,
1. You can reduce the Hash calculation time by storing the vhd on faster hard drive(s) and using faster CPU. For that size vhd you should be able to get it down to less than 10 minutes for the calculation time.
2. You can reduce the upload time by using faster Internet connection that is as close as possible to Azure Japan West facility, with low latency and no packet loss. Under excellent conditions (high bandwidth link, low latency, no loss) you should
be able to get several hundred Mbps throughput.
-TP -
DTW template for uploading Intial Quantities
hi,
Can anybody of you tell me what is name of DTW template for uploading
intial quantities ?
Thanks,
A.JeyakanthanThank you all for reply
In oStocktaking
template contains itemcode,warehouse & quantity.
We also require price to uploaded with initial quantities,
how to do it ? -
Template Builder - Upload Template Button Disabled
Hi,
I installed Oracle BI Desktop and logged into Publisher Server.
I see Open and Logoff button as Enabled.
But "Upload Template" and "Upload Template AS" buttons are disabled.
Any pointers?
regards
NikhilHi Nikhil,
Please use the "XML" button within you datamodel to export some sample data (or just create an empty xml file) and then click "Load sample data" within the BIP plugin. Select the XML file. Now al buttons will become available.
Kind regards,
Machiel -
CSV file template for Uploading PO confirmaiton
Dear all,
We have activated Badi for Upload PO confirmations for a supplier in SNC 7.0.
Request if any of you can please let me know where can I find the CSV upload file template.
Thanks,
mahesh.Hi Mahesh,
You can download the CSV file from Tools-->Download center(select purchase order confirmation.
To create a purchase order confirmation, you enter X in the To Be Confirmed column of the schedule line. If the schedule line has an X, you can change the following data:
■Quantity
■Delivery date
Note
Depending on the system set-up, for example if you have set up Customizing for POs to allow shipping dates to be used instead of delivery dates, you can change the shipping date.
End of the note.
■Confirmed price
Note
If you leave the Confirmed Price field empty in all schedule lines of an item, the requested price is used. If you enter a value in the Confirmed Price field of one of the schedule lines, or in more than one schedule line, but those values are the same, the system uses that value as the confirmed price for the item. However, if you enter two or more different confirmed price values in the schedule lines of an item, the system regards this as an error, and the item is not processed.
End of the note.
■Confirmed MPN
■Confirmed Mfr
■To reject the PO item, you enter an X in the To Be Rejected column of the schedule line that has an X in the Requested column.
Now upload this file in Tools->upload center.
See the below link for more information.
http://help.sap.com/saphelp_snc70/helpdata/EN/b4/79223dc5b54b36899ea4f731a712f6/frameset.htm
Regards,
Nikhil -
Dreamweaver cannot find, and thus apply, templates after uploading the website to server
Hi,
I am using Dreamweaver 8, and my problem is like this:
When the site was first built using Dreamweaver, I created a template, after which I was able to apply it to other existing/new pages by [Modify/Templates/Applying Templates to Page].
However, after uploading all te files to the server, and then downloading them back to my computer, when I tried to apply a template to an existing/new page by [Modify/Templates/Applying templates to Page], Dreamweaver showed that there is "no template" in the entire site - despite the fact that the folder containing the .dwt file was successfully downloaded from the server.
Also worth mentioning is that, for the pages that are already attached to the template before I sent the files to the server, they are working just fine even after I have uploaded them.
I saved the files in the following manner:
>ROOT FOLDER
>>>TEMPLATE FOLDER
>>>>>>template.dwt
>>>indext.html
>>>OTHER PAGES FOLDER
>>>>>>page1.html
>>>>>>page2.html
I also tried to save the template.dwt directly under "ROOT FOLDER", but that didn't work neither.
Is somebody else facing the same problem? Or does anyone know how to solve this issue? It would be much appreciated.
Thanks!Your Files panel (F8) should look like this:
site - YourSiteName (C:\YourSiteName)
index.html
-OtherPages
page1.html
page2.html
-Templates
template.dwt
If your .dwt file is located in any location other than the Templates folder, it won't work.
Templates are not a server-side technology. Templates only work on local files in Dreamweaver.
I suggest you open your template and examine the code to ensure it is valid and that the Editable Regions are properly defined.
http://validator.w3.org/
Then open a child page made from that template to ensure it is pointing to the correct Template.dwt file in your Templates folder.
Nancy O. -
Wrong period values in Text template for upload of Plan data (KP06/KEPM)
Hi,
We are facing an issue in the upload template in text format for Upload of Cost Centre Planning data (Transaction KP06) in ECC 6.0.
We have some User defined layouts for Excel upload of plan data. If we save the file as a text (tab delimited) file, the Period values above the Column"Period" do not correspond to the correct periods in ECC 6.0. for e.g. the values above Period 1, Period 2, Period 3 are shown as 6, 5, 4 instead of the correct values 1,2,3. These values are considered by the system for uploading the Planning value in the appropriate Periods and hence the values entered in the Column Period 1 in the text file are incorrectly uploaded by the system in Period 6 based on the values generated by the system in the text file.
However, we do not encounter this issue in the 4.6C system where the values are correctly shown.
We are facing a similar issue with the text upload template for Sales Planning data in CO-PA (Transaction KEPM), where the values generated by the system do not correspond to the correct period.
Regards,
RajaramHi Christian,
Thanks for the quick reply, i followed your earlier reply in the below thread and resolved the issue. Thanks.
How to delete CO plan data
Hi Ajay,
Thank you, We are uplaoding through KP06, Menu -->Extras --> Excel Planning --> Upload.
Regards,
Raj -
Appraisal template download upload in excel
Hi All
We have the download upload functionality of appraisal template in PDF by offline layout setting in phap_catalog_pa. My query is can the upload and download of the template can be done in excel also. Our requirement is to download the appraisal template as configured in phap_catalog_pa in excel and then uploading back the same through portal. Please suggest if this can be done and how to proceed further.
ThanksI have found a solution. FM HRHAP_DOC_BODY_ENHANCE
In this example the program add two dynamic elements for qualification.
REPORT ZYS_APR_UPLOAD_DYN.
DATA: wa_prepare TYPE zys_upload,
g_template_id TYPE hap_template_id,
g_header_defaulting TYPE flag,
gs_return TYPE bal_s_msg,
gs_menu TYPE hap_s_menu, "for status
gs_appraisal_id TYPE hap_s_appraisal_id,
gs_doc_processing TYPE hap_s_doc_processing,
gs_header_texts TYPE hap_s_header_texts,
gs_header_status TYPE hap_s_header_status,
gs_header_dates TYPE hap_s_header_dates,
gt_header_add_data TYPE hap_t_header_add_data,
gs_header_display TYPE hap_s_header_display,
gt_header_appraiser TYPE hap_t_header_appraiser ,
gt_header_appraisee TYPE hap_t_header_appraisee ,
gt_header_p_appraiser TYPE hap_t_header_part_appraisers ,
gt_header_others TYPE hap_t_header_others,
gt_buttons TYPE hap_t_buttons,
gt_body_columns TYPE hap_t_body_columns,
gs_body_columns LIKE LINE of gt_body_columns,
gt_body_elements TYPE hap_t_body_elements,
gs_body_elements LIKE LINE of gt_body_elements,
gt_body_element_descr TYPE hap_t_body_element_descr,
gt_body_element_buttons TYPE hap_t_body_element_buttons,
gt_body_cells TYPE hap_t_body_cells,
gs_body_cells like line of gt_body_cells,
gt_body_cell_val_values TYPE hap_t_body_cell_val_values,
gt_body_cell_val_ranges TYPE hap_t_body_cell_val_ranges,
gt_body_cell_val_c_like TYPE hap_t_body_cell_val_c_like,
gt_body_cell_val_descr TYPE hap_t_body_cell_val_descr,
gt_body_cell_notes TYPE hap_t_body_cell_notes,
ls_header_appraiser TYPE hap_s_header_appraiser,
ls_header_appraisee TYPE hap_s_header_appraisee.
DATA: COUNTER(5) type n VALUE '00003',
lv_template_id TYPE objektid,
date type sy-datum,
lv_pernr TYPE pernr_d,
s_return TYPE bal_s_msg,
lt_status_notes TYPE hap_t_status_note,
lv_error TYPE flag,
ls_wd_return TYPE bal_s_msg,
ET_BODY_ELEMENTS_ADD type HAP_T_BODY_ELEMENTS_ADD,
wa_BODY_ELEMENTS_ADD like line of ET_BODY_ELEMENTS_ADD.
START-OF-SELECTION.
gs_header_dates-ap_start_date = '01.01.2014'.
"endda
gs_header_dates-ap_end_date = '31.12.2014'.
gs_header_dates-ap_date_set = '31.12.2014'.
"APPRAISER
FREE gt_header_appraiser.
ls_header_appraiser-plan_version = '01'.
ls_header_appraiser-type = 'P'.
lv_pernr = '1000800'."wa_prepare-value.
ls_header_appraiser-id = lv_pernr.
APPEND ls_header_appraiser TO gt_header_appraiser .
"APPRAISEE
FREE gt_header_appraisee.
ls_header_appraisee-plan_version = '01'.
ls_header_appraisee-type = 'P'.
lv_pernr = '1000800'."wa_prepare-value.
ls_header_appraisee-id = lv_pernr.
APPEND ls_header_appraisee TO gt_header_appraisee .
wa_BODY_ELEMENTS_ADD-NEW_ELEMENT_TYPE = 'Q'.
wa_BODY_ELEMENTS_ADD-NEW_ELEMENT_ID = '50000392'.
APPEND wa_BODY_ELEMENTS_ADD to et_BODY_ELEMENTS_ADD.
wa_BODY_ELEMENTS_ADD-NEW_ELEMENT_ID = '50000399'.
APPEND wa_BODY_ELEMENTS_ADD to et_BODY_ELEMENTS_ADD.
CALL FUNCTION 'HRHAP_DOC_BODY_ENHANCE'
EXPORTING
row_iid = '0001'"wd_comp_controller->enhance_row_iid
plan_version = '01'
s_appraisal_id = gs_appraisal_id
t_header_appraiser = gt_header_appraiser
t_header_appraisee = gt_header_appraisee
t_header_part_appraisers = gt_header_p_appraiser
t_header_others = gt_header_others
s_header_dates = gs_header_dates
s_header_status = gs_header_status
t_body_columns = gt_body_columns
* FREE_ENHANCEMENT = ' '
trusted_call = 'X'
enhancement_type = ' '
t_body_elements_add = et_body_elements_add
* T_BODY_ELEMENTS_STRUC_ADD =
IMPORTING
s_return = ls_wd_return
CHANGING
s_doc_processing = gs_doc_processing
t_body_elements = gt_body_elements
t_body_element_descr = gt_body_element_descr
t_body_element_buttons = gt_body_element_buttons
t_body_cells = gt_body_cells
t_body_cell_notes = gt_body_cell_notes
t_body_cell_val_values = gt_body_cell_val_values
t_body_cell_val_ranges = gt_body_cell_val_ranges
t_body_cell_val_c_like = gt_body_cell_val_c_like
t_body_cell_val_descr = gt_body_cell_val_descr.
"Saving document
CALL FUNCTION 'HRHAP_DOC_UPDATE_BODY_AND_SAVE'
EXPORTING
plan_version = '01'
IMPORTING
s_return = s_return
CHANGING
s_appraisal_id = gs_appraisal_id
s_doc_processing = gs_doc_processing
t_header_appraiser = gt_header_appraiser[]
t_header_appraisee = gt_header_appraisee[]
t_header_part_appraisers = gt_header_p_appraiser[]
t_header_others = gt_header_others
s_header_texts = gs_header_texts
s_header_dates = gs_header_dates
s_header_status = gs_header_status
s_header_display = gs_header_display
t_body_columns = gt_body_columns
t_body_elements = gt_body_elements
t_body_cells = gt_body_cells[]
t_body_cell_notes = gt_body_cell_notes
t_status_notes = lt_status_notes.
IF s_return IS NOT INITIAL .
WRITE: / s_return-msgid , s_return-msgty ,s_return-msgno ,s_return-msgv1, s_return-msgv2, s_return-msgv3 .
ENDIF.
counter = counter + 1. -
Can Data Templates be 'uploaded' into BI Pub?
I've developed several data templates which I need to support a given report.
Up to this point I've either edited/developed them within the BI Pub tool's Data Template editor or cut-n-paste them to here from another editor.
This works, but, is it possible to upload them into the tool, as you can for report layouts, and associate them with the data model?
This would definetly be needed for version control of anything being sent to a customer or production environment.
ThankX,
RonTim,
We're still in the process of evaluating reporting tools which provide our customers some control over the report format and we're at least a year away from deliveing anything. But at least it sounds like I can check this issue of my list.
ThankX again,
Ron -
Applying CT template to uploaded documents
I have a document library with multiple content types.
Each CT has a custom document template with logos, doc properties, text, etc.
If I create a New Document from the Ribbon, the document gets the CT metadata
AND the document template.
If I upload a document to the library, I can assign a CT to the document so as to get the metadata, but no document template is set. It remains the default blank word doc - no logo, etc.
Can uploaded documents not have the document template assigned that is with the Content Type?Hi,
By design, template will work only when you create new document, it won't be applied to existing document.
You could copy and paste existing content to New Document template.
You may also ask the question in Office forum and check if there is any way to apply template on existing template. Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/a39906a2-3dfc-45cf-b57d-67b7df056d36/applying-template-to-large-number-of-documents-?forum=word
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Checking template when uploading PDF
Hi,
we are using interactive forms in ECC system.
The interactive form is generated and populated online then saved in local directory.
Then PDF is opened, data is entered offline and saved again.
We then upload file to system to update database.
We are intending to do this in mass process (10 pdfs).
We want to be able to check that PDF that is uploaded is based on the right template befor calling transformation ID to get data for update.
Is there a method to do this ?
Nicolas.Hello Nicolas,
You could include a hidden field that contains the template name or some other internal identifier.
Regards,
Philipp -
Creating an offline PDF template for upload and submit
Hi Gurus,
I'm very new to Adobe Interactive forms and will need your advise.
From the tutorials, when we create a offline PDF application that can upload a PDF for submission, we were always given the sample template PDF file provided by the tutorial. (travelrequest.pdf)
Now I need to create my own offline PDF template by myself so I can integrate to my WD program to include uploading the offline PDF template and submitting to backend.
the offline PDF must be editable and save via acrobat reader.
Any further notes or documentations that I can follow up to? Cos most of the doc I found doesn't teach me how to go about creating the PDF template for offline use in the first place...only the backend and WD integration which I already know.
Please help! Thanks!
ps: points will be generously awarded to answers.
Regards,
JansenHi Jansen,
As far as I know the WAS 620 only supports to output your Forms and Scripts to PDF Format but they are not interactive.
The Adobe Interactive Forms Solution is only available from WAS 640. You can design your forms either in ABAP transaction SFP or in NWDS(Netweaver Developer Studio) Form Designer.
For craeting forms in WD ABAP, have a look at the links below:
SAP Interactive Forms by Adobe
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Web Dynpro ABAP
http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
regards,
harman -
Templates not uploading all pages using same template.
Hey guys, I'm having difficulties with Dreamweaver at the moment.
Here's the problem:
I've created a template for my current website. This file has .dwt so it's the template.
I've created so far 3 different pages using html and the template.dwt file.
The template has a editable region for the content.
But, I was editing the non editable regions, like the naviagation links and names.
I changed some information on the template file, pressed Ctrl+S then this window popped up:
http://prntscr.com/nd36z
Yes, it works so far according to dream weaver template guides, but I have 2 other pages using the templates which are named index.html and staffinfo.html, which is not showing up there.
After I pressed update: It shows:
http://prntscr.com/nd3cj
I'm wondering what might be the problem there. I had a look at the html code on my other 2 pages that wern't displayed, and at the top it was linked with the template file name which was the same as the "offguides".
Another question i want to ask is, is there a way to update a template without already having to open the files with the templates on? Because at the moment, I have to open all the files with the template on, then save them manually after I saved the template. Because if i have like 1000 different pages using the same templates it would be quite time consuming to keep pressing save and open 1000 different tabs for the pages. So is there like a auto update & save? The two other pages doesn't show up in the pop-up window, but if I open them the templates updates them, but i still have to save manually.
Thanks for reading, hope this can be solved.
James.Jon, ohh, I'd try it, but there is no Page from template: http://prntscr.com/nd7oa
Nancy, Dreamweaver CS5. Windows Vista.
Which code do you want?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8" />
<meta name="description" content="Your description goes here" />
<meta name="keywords" content="your,keywords,goes,here" />
<meta name="author" content="Your Name" />
<link href='http://fonts.googleapis.com/css?family=Dosis' rel='stylesheet' type='text/css' />
<link rel="stylesheet" type="text/css" href="/origo.css" title="Origo" media="all" />
<link rel="icon"
type="image/png"
href="/images/favicon.png" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>Pokemon Creed Help Site - Beta</title>
<!-- TemplateEndEditable -->
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
Thats the start of the template code. -
Rtf template not showing as uploaded in concurrent program
Hello
I have created xml data definition and uploaded a rtf template. Then linked it to my concurrent program. But when i ran the concurrent program successfully all i get is the xml output. Upon closer inspection it shows that no template is uploaded. Yet in xml publisher it shows as uploaded.
so my question is: what can prevent a rtf template from attaching to a concurrent program?If you and send the template, it would be helpful.
kindly send it to [email protected]
Deepa
Maybe you are looking for
-
Major Problem with Phone Line and Support.
Well my problem started about a month and week ago. The problem is that my phone line is messed up. My line drops out unexpectedly and I cant receive calls or send calls. If it does work then the phone only rings for half a second 3 times. If you don
-
Custom xml transformer provider for xml iview template
I have been trying to get a custom simple xml transformer to work, which will show up in the xml iview template. I have seen the SAP Help docs and the recent weblogs on the subject. I can't get this simple transform functionality to work. I can ge
-
Hi, my Macbook - late 2009, Mountain Lion - has been crashing several times a day for the past week or so, and I have no idea what to do about that. First it just happened when I was playing a game or watching a movie, but now it even crashes sometim
-
Disk Utility doesn't recognizes my disk brand
I'm trying to format my LaCie 500 GB USB. When I run disk utility it shows the disk as a Samsung HD501LJ. It's thefirst time that happens. I tried disconnecting, repairing disk, etc. Any thoughts on that?
-
Hi Guys, I would like to asked for your help regarding BDC_OKCODE. I need the system to accept automatically the BDC_OKCODE rather than ticking the check box to accept the BDC_CODE. Thanks in advance! Regards, Michael Nacionales