Templates show up as having broken links in site link check

CS6
I have about 20 templates for my site, and a couple of them show up as having broken links when I do a check links site wide search?
When I make changes to these particular templates now, the new links and associated pages will show up as having broken links also?
Then when I map the new pages to the correct page, I get the template is locked message?
I suspect the problem starts with why are the templates being included in the link check to begin with.
Any thoughts will be appreciated.
Brad

Wholesale site and each supplier requires a different menu and lay out.

Similar Messages

Yahoo is my home page and News, Sports, Business links now shows a few sentences after each main URL link. How do I put it back to show just the URL links?

Yahoo is my home page and News, Sports, Business categories/links changed and now shows a few sentences after each main URL link/topic. How do I put it back to show just the URL links/topics without having to scroll down and down the page. All the extra sentences after the links causes too much scrolling to view the topics.

Those steps did not solve my problem. Here is an example of what I see although it's not exact copy/paste. All I want to see are the links but I get all the verbiage after the links
Firefox 17.0.1 version
''' '''Ask Stacy: How Can I Rebuild My Credit?''''''
Here’s a question familiar to millions of Americans… Stacy, My wife and I recently filed for bankruptcy due to high medical bills we were unable to pay. We purposefully didn’t add our Wells Fargo credit ...
Money Talks News
'''Analysis: High stakes for Cuba in Chavez's cancer battle'''
HAVANA (Reuters) - As Venezuelan President Hugo Chavez recovers in Havana from his fourth cancer operation, Cubans face renewed worries about their economic future if the country's top ally dies or has to step down from office. Cuba has staked its economic well-being on the success - and generosity…
41 mins agoReuters
[$$] Playing FICC or Treat With Bank Investors
'''Playing FICC or Treat With Bank Investors'''
The Wall Street Journal
AdChoices
'''Cybergeddon
A digital crime thriller from Anthony E. Zuicker, the creator of CSI. Only on Yahoo!
And here is what Internet Explore shows: All LINKS below
'''Molten gold signals mining's return to Calif.'s Mother Lode'''
'''Century-old fight for Budweiser name hits new snag'''
'''NRA goes silent after Connecticut school shooting'''
'''.Authorities: Kansas man who killed 2 cops dies'''

I downloaded Dreamweaver CC 2014.1, started using it but cannot find Show Fluid Grid Layout Guides button, Resize LI.link sizing handle and 'move up a Row' arrow. Where can I find them?

I downloaded Dreamweaver CC 2014.1, started using it but cannot find Show Fluid Grid Layout Guides button, Resize LI.link sizing handle and 'move up a Row' arrow. Where can I find them?

You have the latest version (CC 2014.1 or 2014.1.1) in which the interface condenses Design View with Live View buttons in normal layouts. See screenshot.
However, in FGLayouts, Live View is the only option which poses some editing problems and has been highly criticized.
Is there any way to display the Design View in fluid grid pages?
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
You can disable this restriction by adding an X to the FGLayout CSS.
    Dreamweaver Fluid Grid Properties
    dw-num-cols-mobile:      X 4;
    dw-num-cols-tablet:        8;
    dw-num-cols-desktop:    12;
    dw-gutter-percentage:    25;
=====================================
Having said that, it might just be simpler to revert to an earlier version. Log-in to Creative Cloud Desktop app. Go to Filters & Versions > Previous Version. See screenshot.
Nancy O.

HT201656 In itunes my iphone shows up as having nearly 8G of "Other"...what is taking up all this space?

In itunes my iphone shows up as having nearly 8GB of "Other"...what is taking up all this space?
On the iphone itself under settings, general, usage it indicates 12.7GB used and only 840MB available. I have one app (Audible) that is taking up 1.6GB, photos&camera take up 636MB, Spotify takes up 495MB, everything else takes up less less than 100MB each and totalling less than 2.5GB.
So if Audible is taking up 1.6GB and Spotify is taking up 636MB and all other apps take up 2.5GB this combined totals around 5GB. I have a 16GB iphone 4s.
16GB minus 5GB (my calculated usage) equals 11GB remaining. Allow for some required space utilization (let's say 3GB) and that leaves 8GB remaining. Why does my phone indicate 840MB available? That seems to equate to the amount shown in itunes that indicates 8GB of "other".
What is this 8GB of "other" that is taking up so much storage space on my iphone?
Thanks in advance.
John

johncdaly1955 wrote:
In itunes my iphone shows up as having nearly 8GB of "Other"...what is taking up all this space?
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup...
But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup...
Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116

Is it possible to have a Groove Template show up globally, i.e. in the menu

Hi All,
I've been creating custom groove templates and would like to have these templates show up in every song automatically, is that possible? I'm thinking it's not but should ask anyway,
thanks,
t

You need to copy the regions that make up the groove templates to every project.
What you can do is copy the regions to a new project and pack those tracks into a folder and/or hide the tracks. Set the regions as groove templates...
This can now be saved as a template and every time you open that template the groove templates will show in the Quantize menu.
JG

I'm having problems with the hyper-links and footer

I'm having problems with the hyper-links (they flicker and also highlight other text on the page) and also the footer space goes on forever in preview site mode, even though I have made it small in the master and homepage and subsequent pages. This only happened after I loaded a MUSE file into the current version of Muse CC as it runs upgrades on the imported Muse file. Please Help Me Adobe Community.

Hi Brad,
I'll do what you mentioned about republishing all files, what Adobe Muse seems to to is run and upgrade when you open an older version .muse file, optimising it.
Hopefully republishing it rather than syncing with the new version might help. I'll do this Tuesday evening when I am back from my client meeting.
I was thinking, is there a way of me rolling back to a previous version of Adobe MUSE CC ? I'm using build Adobe Muse CC (2014.3) but I wish to roll back to Adobe Muse CC (2014.1), as this was the version the site was working properly with.
Thanks Brad.

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".
How can I correct this problem?

What type of file is it? What is the extension (the 3 letters after the . (DOT)) of the file?
Could be it is a Windows Exe file and simply will not run on a Mac. Which is good because anyone that would send you a excute (.EXE) file is up to no good. just my opinion.

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine. Any idea what the problem may be?

You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards.

My ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

my ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

despoina kiato wrote:
καμία φορά σταματάει να δουλεύει. σβήνει το κινητό και μου δηχνει το μήλο σπασμένο. απενεργοποιήτε μόνο του . αυτό είναι όλο .
Englidh would help.

Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion.

Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion. Any confirmation yest showing compatibility with Office 2011?

I'm running MS Office 2011 on Lion and it runs just fine. No "Full Screen", but it runs just fine. There may have been an update to install (I know there was an iWork one anyway), but even before I installed any updates Office '11 worked just fine.

One insane link, one schizo link, or is it me?

Mac G5. Tiger 10.4.11. GL CS.
SCHIZZY LINK
On a given page is a Smart Object, typically a GIF or JPEG. Click it.
Sometimes it shows two links, a Source and a Target, usually the same name.
Sometimes it shows just a Source.
Both seem to work equally but I am wondering if those that have both can be re-linked so there is just a Source.
INSANE LINK
I revised all the links that go to an email address, to links that go to a Reply Form page. In theory, there should be no more links to the now-defunct email address.
But when I view pages with Command-5, In/Out Links, within that utility a few pages still show a link to the old email address. I worked on one such page and could not find that email link.
I even checked the space or the period or the soft return showing before or after the link that goes to Reply Form to eliminate any stray component of the original now defunct email link. But I can find nothing.
Perhaps the deleted links are really deleted but the in/Out links utility does not know this. What can I do or try? Or "forget it"?
Thanks.

INSANE LINK
> Have you checked the source code of the page?
That was a perfect reply. I did so on one page. It told me where the old (undeleted that I meant to delete) link was, I operned Layout, deleted it and, perfect.
One difficulty. The Find command in GoLive is weird. I type in the old email address and it may or may not find it. Guess I have to read up on Find, the most basic thing. If you have any trick for finding something in GL, please let me know.
SCHIZO LINK
> Is having two linked files a problem for you in some way?
No, just want to know.
I think what happened in some cases is this, or something like this: I had an object or maybe a smart object in place, linked etc. But maybe I had to redo it. I have the original in a Finder-based folder. I drag that into the proper Site folder. It may or may not show. If I quit GL and open GL, it appears. Then I link the layout placeholder to it, it opens ImageReady, I save in the Site folder, root level, move it it into the Images folder, which replaces the original image. I relink to it.
Something like that. A little messy.
So I wanted to be sure whether I have Source only or both Source and Target it matters not. If it matters, I can always take the time (ugh!) to relink the image to the file and have only, I guess, Target. If it doe not matter, that's better--saves time.
> GoLive will not allow you to write over the Source file with the Target file when you optimize the image. You must save in a different location or with a different name
Which is about what I was trying to say. Next time I go through this I will note the specific steps so I can be more specific if I need to follow through.

My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Site link failed

Hi All,
We have a client with one CAS & 4 primary sites (All the sites are SCCM 2012 R2) because of some maintenance work one of the primary site was down for few hours & now in site hierarchy the link shows as failed. when we hover over the link it
shows that the Global data replication between the CAS & the Primary site is failing.
What we have tried :-
1. Run the replication link analyzer - Its unable to resolve the issue & just shows the names of replication groups which are failing.
2. Run the SPdiagdrs command on primary site DB - This shows the Global replication groups which are failing & are not active.
3. Run the Update RCM_DRSInitilazationTracking set initializationstatus=7 where ReplicationGroup = "Group Name" - To reinitialize the replication.
4. configuration data.pub => Drop these on Primary server RCM.BOX - As mentioned
here. This solved the issue initially but the replication was failed again after some time.
5. rcmctrl.log on CAS shows this error :-
Calling BCP out with SELECT ID, SYSRESUSEID, SITENUMBER, NAME, VALUE~FROM SC_SysResUse_PropertyList, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_SysResUse_PropertyList.bcp, C:\Program Files\Microsoft
Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, SITENUMBER, USERNAME, PASSWORD, AVAILABILITY~FROM SC_UserAccount, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount.bcp, C:\Program Files\Microsoft Configuration
Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, USERACCOUNTID, SITENUMBER, NAME, VALUE1, VALUE2, VALUE3~FROM SC_UserAccount_Property, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount_Property.bcp, C:\Program
Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, USERACCOUNTID, SITENUMBER, NAME, VALUE~FROM SC_UserAccount_PropertyList, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount_PropertyList.bcp, C:\Program Files\Microsoft
Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Need help on this, I can see the error's coming but need suggestions for troubleshooting this issue.
Thanks,
Pranay.

Hi,
Any update? Could you find any helpful information in the rcmctrl.log?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to copy link text from links?

Currently when selecting a link, there is no easy option to copy link text. This feature should be implemented to be one of the options in the popup menu once a link is selected, alongside with "Open Link in New Tab"; "Copy Link"; !"Copy Link Text"!; "Share Link"; "Bookmark Link".
This menu option will provide a convenient way to browse through search results and other various links and will add to the efficiency of navigation of web pages.

Hi eva88, are you copying from a webpage or from the address bar? If you copy a link from a webpage, Gmail should pick up the HTML as is from the original. But when you copy from the address bar, you need to take the extra step of using the "link" button in Gmail. Due to changes in the Gmail UI, this may be harder to find, but for me, it appears when mousing over the lower part of the compose box. I've attached a series of screen shots showing where I see it.

Templates show up as having broken links in site link check

Similar Messages

Maybe you are looking for