Templates with sound?  Resolution with 1440x1080?

SOS. Two problems:
1. I'm trying to save a Motion template with sound. The Motion Untitled document plays OK with sound, but when I save it as a template.... no sound. What am I doing wrong? (The sound is part of an imported QT movie)
2. My client says he is capturing video at 1440x1080i60 29.97 fps. He wants a template at that resolution. When I create a template at that resolution, and open in FCP in a sequence at that resolution, the Motion template is squashed in the vertical direction. I've tried square pixels and 0.9 pixels, to no avail. I can create a template at 720x480 DV no problem.
Any advice gratefully received!!
regards, david

#1. Correct. You'll need to sync the sound with the template in FCP. Sorry!
#2. In your Final Cut Pro sequence- is Anamorphic Selected? In my quick test, it comes across fine, but gets skewed if Anamorphic is selected. Select the sequence in question, and hit Apple-0.

Similar Messages

  • Problem with image resolution with larger screen size

    I was working on Basic Lens Sample (Basic
    Lens Sample) for windows phone 8 App. In this the camera by default sets to default highest resolution.
    Just had couple of questions on this:
    1.) How to change basic settings like resolution,ISO etc.,in this app, because during initial settings
    it only takes default value and when I try to change that it throws an error. Also a code comment is written during initialization of camera to take only these default values. So when to change these settings and how?.
    2.) How to adjust resolution for phablets having 6" screen. Like when I run the code in Lumia 1320,
    the image resolution is not that good and it breaks. So how to adjust screen resolutions for catering different smartphones with different resolutions and screen sizes.
    Any solution or suggestions or snippets is very much appreciated.
    Thanks In Advance.

    Hello,
    For you first question, we can use
    GetAvailableCaptureResolutions method of PhotoCaptureDevice to get the available resolutions in device. That code sample returns the largest resolution by default, you just need to choose an appropriate one. You can find it in CameraController class in
    Models folder in the project.
    For you second question, I tested the sample in lumia 1320, I didn’t see the image broken.
    >> So how to adjust screen resolutions for catering different smartphones with different resolutions and screen sizes.
    You can get an appropriate resolution image and let the OS downscale it for you. You can find the support resolution in the following link. Go to Supported resolutions section.
    http://msdn.microsoft.com/en-us/library/windows/apps/jj206974(v=vs.105).aspx.
    If you want to display the whole large resolution image in lower resolution device, I think you can use
    ScrollViewer control. Use Application.Current.Host.Content.ActualWidth and ActualHeight properties to get the device resolutions, and then you can know if your app is running on a lower resolution device.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • Problems with sound, problems with sound

    while trying to view a vdix film the sound never works, can someone help me?

    Hi, what are you using to view it with?
    Some possible clues...
    http://forums.macrumors.com/showthread.php?t=1413906

  • Problem with 1440x900 resolution with ATI card

    I can't turn my resolution to 1440x900.
    When i start X in 1440x900 i see a big black bar at left side. I have tried with many modelines for my monitor, but with no result.
    lspci | grep VGA:
    04:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
    xorg.xonf:
    Section "Monitor"
    Identifier "X193W"
    Option "DPMS" "true"
    # HorizSync 30.0 - 82.0
    # VertRefresh 50.0 - 75.0
    ModeLine "1440x900" 141.9 1440 1512 1688 2008 900 900 903 942
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    BusID "PCI:4:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "X193W"
    Defaultdepth 24
    SubSection "Display"
    Modes "1440x1440" "1440x900" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Anyone has the same monitor?

    I don't have the same monitor but try removing Section "Monitor" and your modelines.  They should be auto detected with the latest X.org
    Try this:
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    BusID "PCI:4:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "X193W"
    Defaultdepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    A good rule with modern X is to only define the things you need to change/fix.

  • Help please with sound problems with titles in iMovie HD/iDVD

    I find on a DVD I am creating that certain titles produce brief, grating noises when once the DVD is burned.
    I am unable to hear these noises in iMovie HD.
    I have tried re-importing the video and doing all the captions again ~ but the result is always the same: these loud distortions of the audio, but only on a couple of the titles.
    By the way, I have found that by setting the volume to 60% on the regular video and setting it to 140% on the clips with titles, I get a result on the burned DVD where the volume appears constant. I have never understood why putting on a title should diminish the volume: seems like a serious weakness in this software.
    But right now, it's these unwanted noises that are spoiling my project.
    Any answers?
    G4 Quicksilver   Mac OS X (10.4.2)  

    Hi again Sue.
    I've just gone and read that reference.
    No, I've tried extracting the audio and re-doing the title, but when I burn the DVD (and you know how long that takes) I find on playback I have these grating noises.
    I suppose I should be grateful they are only brief and affect only a few of the many titles.
    Thanks though for taking the trouble to try and help.
    Hue in London ['Hugh', 'Hue'... either one's fine!]

  • Better performance with higher resolution with ultra..why ?

    how is this possible ? I got a q6600, 8gb ram and a msi ultra8800.Running crysis with everything to max on 1024X768 at 32 fps, and 1280X1024 at 40 ?
    weird, any ideas as to why thats happening ?
    cheers

    me again...sorry for bothering
    got another question concerning my ultra, and might as well post it here....Is this h2o cooling compatible with my msi 8800 ultra ?
    http://www.virtual-hideout.net/reviews/Mega_Watercooling_Roundup/Zalman_Reserator_2/index.shtml
    sorry if its a stupid question, but im really really REALLY a noob here
    cheers for any info

  • Need to play and stop sound file with 1 ms resolution

    Hi,
    I'm trying to open a .wav file then later play it at a time when another parallel loop activates a boolean local variable which controls playback in my "sound" loop. I need high time resolution in stopping the playing of the .wav file, ~1ms. From what I've gathered, I can't use the "sound output write.vi" because it locks the loop until it finishes outputting a set number of samples. Because of this, "sound output stop.vi" has to wait until the next iteration, which is more than ~1 ms.
    In the help menu of the Sound Ouput VIs it says you can set the task ID for the "sound output start.vi" using the "sound output configure.vi." Unfortunately I've only been able to use the "sound output start.vi" following "play sound file.vi", and I don't really know why this is the case.
    I can't start my sound with the "play sound file.vi" because it locks the loop its in until it finishes playing the sound. Oddly this only happens when there is a parallel loop running, if I run it by itself, with no other loops, it doesn't lock the loop. I thought it might have something to do with the local variable, but the loop doesn't lock when the loop restarts the sound using the "sound output start.vi." 
    After opening a .wav file, can i use the "sound output configure.vi" to create a task ID for the "sound output start.vi" to work? Or do I have to use the "sound output write.vi" after calling the "sound output configure.vi." The help menu makes it seem like the prior suggestion is possible.
    Thanks a lot!

    Since it sounds like the problem you're running into is getting the data loaded from the file before you're ready to play it, look at the Files sub-palette, specifically the Sound File Read Simple VI.  You can use this VI to load the data into a waveform and have it ready for use later in the program.
    So in your overall program, read the file with Sound File Read Simple and configure the output with Sound Output Configure and call Sound Output Write when you're ready to play the waveform.
    Alex Person
    NI-RIO Product Support Engineer
    National Instruments

  • DVD Sound issues with Siundblaster Audigy ADVANVED

    Hi. I've searched endlessly through the net and this forum, but so far I havent found a resolution to my problem.
    When I play DVDs I get very bad popping. Its identical for each DVD and makes watching a DVD on my PC unbearable. I dont have any problem playing music (any format) or video from the HDD, or audio CDs for that matter, but DVDs are aweful. I tried following the steps from a link in the "Read beofre you post" sticky, but no fix. Initially I thought it may be a problem with my DVD dri've, but I installed a second (3rd party) dri've and I get the same problem, which leads me to think its this ADVANCED MB software. The problem is the same in dedicated DVD software as well as Media Player.
    I'm using a Dell Dimension 550 with Sound Blaster Audigy ADVANCED MB.
    Any help would be appreciated.

    BUMP

  • Just how on earth do you get menu transitions with sound to work???

    I've tried importing them as DVD compliant MPEG-2s (audio and video multiplexed) made with Main Concept and also tried importing them as AVIs.
    Encore seems incapable of transcoding either. Yes, it does try to transcode the MPEG-2s even though I've asked it not to. It seems that even DVD compliant files must be transcoded when used as transitions. It doesn't try to transcode motion menu or timeline MPEG-2s created in exactly the same way.
    Can someone tell me exactly what Encore requires me to import to get working transitions with sound? Exact format, sound resolution, number of channels, bitrate, file type, etc. Is there a minimum length for transitions? Mine are 1 second long - they're just the transition flipping from page to page in a notebook.
    Is there something else I'm missing or is Encore just not capable of doing this?
    I think I'm going to have to just scrap the transitions otherwise :(
    Thanks

    One second is awfully short for an MPEG video clip. You're really challenging the MPEG decoder on the playback device. And if you're using .ac3 audio, it can take up to 2 seconds for the AC3 decoder on a hardware or software DVD player to lock on to the audio stream. Dolby themselves recommend 2 seconds of audio "black" at the beginning of an .ac3 soundtrack.
    So - try lengthening the transition; or use PCM audio in your project instead of .ac3. Unfortunately, the PCM audio route leads to less space on the disc for your video.

  • Checking PDF Resolution with Preflight Single Checks

    While checking resolution with Acrobat 10.1.1, I am baffled and need comments from you all on how to interpret the following preflight reports:
    Checking whether the ppi of my PDF is less than 150 results in a big red X and then states that the document is 96ppi? 
    And - why do the results state No Problems Found when a check is run on the same document asking whether the resolution is between 100 - 120 ppi if the document is indeed 96ppi ?

    If the method seems complicated, I think it may be that, like many people, you don't realise that the question is complicated too.
    It is best not to say "resolution of a PDF" because it sounds as if a PDF has just one resolution. If it were that simple there would be a box to popup with that resolution.
    Rather, each image in a PDF has a resolution, potentially different. So you need to use preflight, to check every image against the rules you want.
    So you can't say "the resolution of my document is 96 ppi". Rather, "my document contains at least one image at 96 ppi". The others might be the same, or this might be the only one, with all the others at (say) 300 ppi.

  • No audio in Muse when I import an Edge file with sound

    I'm using an Edge animation with sound effects in Muse.
    In Edge all audio is playing but when I import the .oam in Muse there is no audio.
    Any Suggestions?
    Thanks!

    Problem solved, local sounds don't work for muse. Moving the sounds folder an external url did the trick..

  • No TV sound - Problem with Pulseaudio and Gnome

    Hi Community!
    Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
    So far I found out, that the problem is with Pulseaudio.
    - Sound works under Windows on same PC.
    - Sound don't work under Arch - not with tvtime, not with vlc, etc.
    - Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
    cat /etc/mediasrv.log
    [1033] Pulseaudio connect reported an error (6 - Connection refused)
    [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
    Daemon already running.
    With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
    Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
    Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
    So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
    At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
    After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
    With sudo journalctl | grep 'pulseaudio' I get:
    sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
    Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
    So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
    With cat /var/log/mediasrv.log I checked the drivers logfile:
    2013-02-10 17:48:55 [343] SETTING DVB-C
    2013-02-10 17:48:55 [343] switching to analog TV
    2013-02-10 17:48:56 [343] SETTING PAL/SECAM
    2013-02-10 17:48:58 [343] invalid audio input selected: 2
    2013-02-10 17:48:58 [343] Setting frequency: 510750000
    2013-02-10 17:48:58 [343] Using settings for Europe
    2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
    2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
    2013-02-10 17:48:58 [1033] initializing audio in audio processor
    2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
    2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
    I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
    But now, when I run pavucontrol I get:
    Connection to PulseAudio failed. Automatic retry in 5s.
    In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
    This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
    If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
    I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
    I also don't know it exactly. So the question to all you ArchLinu pro's:
    How is PA implemented in Arch? And how can I sustainable solve my problem?
    Thank you for your time and help!
    Durag

    There is just one more thing I found out.
    After logging into Gnome and running ps aux | grep pulse I get:
    rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
    rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
    To get the sound to work I run:
    rm -rf .config/pulse/
    killall pulseaudio
    killall -9 pulseaudio
    I again run ps aux | grep pulse
    rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
    rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
    I can recognize that the STATs have changed. Maybe this can help to solve the problem?

  • Problem with sound on iPod Photo

    I am having a problem with sound on an iPod Photo. You can hear music for about 5 seconds and then it is silent. I have to turn off the iPod for several seconds. When I turn it back on it will have sound again for about 5 seconds before going silent again. Has anyone else expeirenced this? Any ideas what may be happening

    Try these steps one at a time.
    The Five Rs.
    If nothing helps, you can arrange online service here. This may be more than just a software problem.
    Service request.

  • Problem with sound on HP Probook 6560b

    Problem with sound on HP Probook 6560b

    my laptop problem is audio driver but it works by hearphone,how can lisen without hearphone?

  • HT1657 I am having problems with sound in my rental movies

    We rent movies all the time but lately we are having problems with sound for our movie rentals.  We watch the first half hour without a problem than the voice is choppy all the time.  Sometimes it is good for five minutes than noting for a while.  We  have tried everything we could think of with no avail.  I could see one movie but the last 5 or so have been the same.  Done trying we need to fix this!  Help!  Any ideas?

    First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Maybe you are looking for