Tempo changes for specific loops

Is there a way to change the tempo for only a certain loop in a song without changing the tempo of ever part? I've done the trick to make all the loops purple so they can be edited, but when I change the tempo it won't let me simply up the speed of one loop to match with another it is mixed with.

GB sets tempo for the project, not for a single track. the only thing you can do is turn off the Follow Tempo checkBox. that's it

Similar Messages

  • Tempo change for a sample

    I'm having trouble matching the tempo of a sample song to match the drum loops. I tried to use the "Adjust tempo using region length and locators" but it does not give an accurate tempo for the song. I just need the sample to match the loops, any thought?

    Hi,
    if you have a longer part, you can use the plugin metering->BPM counter to check which tempo your sample song has. Now, you can open up the sample editor and use time&pitch machine to make an adjustment between the original tempo and your desired target tempo. However, you'll need to fit your edited sample song to the drum groove, so after you have done the rough tempo change, enable flex mode, change to flex view and drag the waveform around so that the transients hit each other exactly at the same beat - you can use flex view to do the fine tuning.
    Fox

  • Vendor Reconciliation account change for specific vendor

    Hi All,
    Client  want to  change the Reconciliation account in the Vendor Master but same reconciliation account assign to multiple vendor master but client want to change specific vendor not for all vendor . The vendor has postings to it right now. We want that all the existing postings should be transferred to the new recon account line item wise and the new postings will go to the new recon account.
    Please suggest some approach so that this can be effected.
    Regards,
    Dev

    Hi Debabrata ,
    To clear the reconciliation Account one option is that you create a new open item managed GL Account and use Transaction FB05 to clear each open item in the Vendor Account one at a Time and post on the new open item clearing Account. Then change the reconciliation Account in the master data and then again use FB05 to post the transactions back on the Vendor Account one at a time,
    As far as impact on Balance sheet is concerned, there should not be an impact except that the balance will be reflected in a different GL Account.
    Thanks
    Muthu

  • Block Price change for specific Items.

    Hi,
    Any helpon this, we want to block  users to change the Price structure at the transaction level but also we want the flexibility of changing the price in specific items which is as per sample from customer . Means we have 100 items and we want the user cannot change the price of 90 items but other items  the users is allowed to change
    Regards
    Grayson

    Hi!
    Use this SP coding in SP_Transaction Notification.
    This SP is Specific for Purcahse Order, Item Property 1 should be checked, Price List No 1 should be updated.
    IF(@object_type = '22') and (@transaction_type in ('A', 'U'))
    begin
    IF Exists (select T0.Docentry from OPOR T0,POR1 T1,OITM I1,ITM1 I2 where  T0.Docentry= @list_of_cols_val_tab_del and
    T0.Docentry=T1.Docentry and T1.ItemCode=I1.ItemCode and I1.QryGroup1='Y' and I1.ItemCode=I2.ItemCode and I2.PriceList='1' and
    I2.Price != T1.Price )
    Begin
    SET @error = 2
    SET @error_message = 'Price should not be changed'
    End
    End

  • Apple loop not responding to tempo changes

    apple loops that have been created from an audio file in the arrange window do not respond to tempo changes. when i had logic 7 there would be a change in the audio file from an audio to an apple loop icon. this is not happening w/ logic 8 although it appears to be saved in the apple loop window but still i have no access to changes being made there as well. what is thew problem?

    http://discussions.apple.com/thread.jspa?threadID=1793992&tstart=0

  • How do you change the tempo of a drum loop?

    Forgive my ignorance but I am still familiarizing myself with all the features of the program. How do you change the tempo of a drum loop? I see in the help file where it tells you how to change the projects overall tempo but not where to change the drum tempo itself. Thanks.

    Nevermind I found it, thanks.

  • How to change color of a button for specific time interval in jsp

    How to change color of a button for specific time interval in jsp.
    Please help.
    Thanks in advance.

    This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
    _The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
    I hope this works for you too.

  • HT1819 Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

    Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • FOR/NEXT loop produces Error in ProcessSQL: Subscript out of range

    Hi all,
    The 2nd FOR/NEXT loop in the following code produces Subscript ouf of Range error:
    *LOOKUP RATEAPP
    *DIM MODEL:RATEENTITYDIM= DRIVEDIM.DRIVER_ENTITY
    *DIM MODEL:RATEACCOUNTDIM= DRIVEDIM.DRIVER
    *DIM MODEL:INPUTCURRENCYDIM = "EUR"
    *ENDLOOKUP
    // Select lookup and normal members by group
    *SELECT(%DRIVERSA%, ID, DRIVEDIM, "[GROUP] = 'A' AND [DRIVER] <> ''")
    *SELECT(%MANUALSA%,ID,DRIVEDIM, "[GROUP] = 'A' AND [SOURCE] = 'MAN'")
    *XDIM_MEMBERSET DRIVEDIM= %MANUALSA%, "U_TEMP"
    *WHEN ACCOUNTDIM.ACCTYPE
    *IS *
         *REC(EXPRESSION=1, NOADD, DRIVEDIM="U_TEMP")
    *ENDWHEN
    *GO
    // this is ok
    *FOR %MANSET% = %MANUALSA%
         *WHEN DRIVEDIM
         *IS %MANSET%
         *WHEN %VALUE%
         *IS <> 0
                   *REC(FACTOR=GET(DRIVEDIM="AD.TEMP"),DRIVEDIM="AD.TEMP")
         *ENDWHEN
         *ENDWHEN
    *GO
    *NEXT
    *XDIM_MEMBERSET DRIVEDIM= %DRIVERSA%, "U_TEMP"
    // this is not OK
    *FOR %DRIVSET% = %DRIVERSA%
         *WHEN DRIVEDIM
         *IS %DRIVSET%
              *WHEN %VALUE%
              *IS <> 0
                   *REC(FACTOR= GET(DRIVEDIM="U_TEMP") * LOOKUP(MODEL),DRIVEDIM="U_TEMP") //  * LOOKUP(MODEL)
              *ENDWHEN
         *ENDWHEN
    *GO
    *NEXT
    If I remove the FOR/NEXT loop, this runs fine. The error occurs everywhere - in logic debugger, in DB, in ExecuteBaseLogic if included in Default logic. The REC statement inside the loop can be anything, even as simple REC(FACTOR=1,DRIVEDIM="U_TEMP"), so the problem is in the loop, not anything else. It validates nicely and the compiled logic looks just as expected.
    This error could occur sometimes if the membersets are too large. However, in this example, the number of members is rather limited. In the debugger is is possible to limit the data region to single specific intersection and the DRIVEDIM membersets combined is exacly 15.
    Could it be possible that the error is caused by member ID-s like AD.1.AVGWAGEGROWTH (length=18)? Is there anything else that can cause  trouble?
    Any ideas appreciated.
    Thanks
    Madis
    Edited by: Madis Udam on Mar 24, 2011 11:06 AM

    I don't think you should have"." dot's in you ID's.
    think about it, in your code you have ACCOUNTDIM.ACCTYPE, which represents the account type of the dimension.
    If you have an id "AD.1.AVGWAGEGROWTH"; wouldn't it think that you are trying the get a value of some member?
    That's just a guess, we established that we wouldn't use any special characters on our id's
    It's working so far
    Try changing the line
    *IS %DRIVSET%
    to
    *IS "%DRIVSET%"
    Edited by: Leandro Cardoso Feliciano on Mar 28, 2011 10:45 PM

  • Highest speed for a loop in the microprocessor of my CRIO?

    Hello:
    Im trying to develop a control system for an inverter with with my CRIO 9022, the speed of my system is 10 kHz(the switching frequency for the inverter is 10 kHz).
    Im trying to develop the controller using the microprocesor, but I was reading that the highest speed achievable for a loop in the microprocessor is around 1 Khz, is this true?
    If is it, how can I develop a control with a loop of 10 Khz? this speed is only achievable using the FPGA?
    Thanks a lot!
    Regards

    Sorry for dont attach the subVI, but the calculation that I perform inside are not diffcult, the first one is only aritmetic calculations and the second one is a PID (I attach them).
    Maybe I can try to move them to the FPGA, but would be very tedious because I need huge times for compile and if I want to make any change will be very more difficult.
    Do you think that the processor can not carry out these loop a higher speed than 400 Hz?
    Thanks
    Attachments:
    SubVI1.PNG ‏50 KB
    SubVI2(PID).PNG ‏81 KB

  • Tempo changes - can't move them when I delete bars or beats

    I have written in many tempo changes in a project, both immediate changes and drawn curves to create rallentandos. I then decide to eliminate a few bars, say, in the middle of the piece, then shift all the regions together where the deleted bars have left a gap.
    When I move the regions, the tempo automation does not move.
    How can I move tempo changes to match the bars I've just deleted?

    I have not done this for a while, but I think you need to hit "select all" in the arrange window and then use the cut/insert time command in the track menu to do your cutting. That should move everything appropriately.

  • Creating new 'category/index' for apple loops in logic

    As well as the standard apple loops, I currently have an additional apple loops jampack & a number of self-made apple loops.
    These have been indexed automatically, & can be referenced via the drop-down on the top right of the loop browser as 'jampack' & 'my loops' respectively.
    I've just bought a 3rd party dvd of apple loops, & would like to be able to reference these via the same kind of category in the loopbrowser drop down, however, the 3rd party DVD has no 'installer' like the official jampack, but instead just has folders of 'apple-loopyfied' AIFFs to drop in the loop browser.
    I assume if this is the case they will appear by default under 'my loops', which isn't ideal - is there a way I can manually create another category(/folder?) for these loops which I can reference via Logic's loop browser drop-down?
    Any help appreciated
    Adam

    ok, still stuck on this but have found the following from page 61 on 'new in logic 7.2'
    http://manuals.info.apple.com/en/NewFeatures_in_Logic_Pro7.2.pdf
    'To keep things tidy, the loop browser offers advanced loop management tools, the jam pack management drop-down allows you to limit the display to loops from a specific jam pack, or other folder' .....then....describing an option from the pull-down, 'vendor x - choose to play loops from a specific third party vendor'
    - this looks perfect for what i want to do, but i assume a vendor must include certain data/meta-data in their loops for this indexing to work & display under vendor x as a dropdown, how do i know if the dvd I have bought will have this? hmmmm....

  • Problem with roaming for specific apps

    Hi :)
    I have a problem with my iPhone 4s:
    When i use roaming on my iPhone 4s i try to save some money by turning off roaming for specific apps, but one day for ca. 3 weeks ago it stopped working!
    Some apps can use roaming but some can't ;(
    There are like 10 apps always turned on, but if i try turning roaming off for an app that is on already it wont work!
    If i close settings and reopen it, the app is now denied using roaming!
    If i try allowing an app it changes but still wont work and after some time it gets in the same possission i cant change!
    I have never experienced this before and i could't find an answer on google ;(
    If you know how to fix it please respond to me here :)
    ~somonekilledme
    P.S: Im really sorry if there are bad english here, but im mot english sooooo..... yeah

    You are on the right track suspecting DHCP conflicts.
    To configure your "roaming network" connect your "slave" Extreme to your main Internet router - either directly or through a switch - and place it in "bridge mode". That will work.
    A router will be distributing IP addresses using DHCP. Anything connected to it should be configured as a bridge, the essential difference being that a bridge does not distribute IP addresses.
    I do not believe your "slave" Extreme will function connected as it is to the "main" Extreme, but may work if you assign it a static IP address. It is not unusual for it to retain this static IP after having been changed to DHCP if its lease is still valid.
    The OK article you referenced must be terribly outdated if it is referring to AirPort Admin Utility. That has not been used in about a decade. Read this one:
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    Unfortunately its screenshots refer to AirPort Utility 5.6, which has been replaced with the prettier, though less useful 6.2.

  • Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL

    Dear All,
    Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL
    Is it Possibal ?
    Any other way to stop Posting Amt more than Rs 10000 ( Ten Thousand)
    In specific T Code FB60
    Required urgent Help,
    Your early reply / solution is expected
    Regards,
    S Kulkarni

    Hi,
    Just go to OB28, define a validation (if you do not use one already), define one step, define the prerequisites on BSEG level of the account and define the check.
    For example, you can use the validation for the following situation: You want to make sure that postings to the expense account "Telephone costs" can only be posted to the services cost center "Telephone". You can carry out the checks needed for this by using the validation.
    Activities
    If you want to define new validations, go through the following activities:
    1. Place the cursor on a line in which company code and callup point are entered (you can enter company code and validation callup point via Edit -> New entries).
    2. Afterwards select Environment -> Validation. You reach the first screen for maintaining a validation.
    3. Select Validation -> Create. Enter the required name. After pressing ENTER, you come to an overview screen of the validation activities belonging to the validation.
    4. Select Insert entry. On the next screen you can describe a new validation activity. You describe the check requirements and the actual check for this. The syntax to be used for this is described in the online help (F1 help) for the input fields for Requirements and Check. You can also define a message (warning or error message) which is sent if the check is not successful.
    If you want to change validations which already exist, proceed as follows:
    1. Place the cursor on an already existing entry and select Goto -> Validation.
    2. On the next screen select Validation -> Display or Validation -> Change. After pressing ENTER, you get to the overview screen of the validation activities belonging to the validation. If you select Insert entry, you can carry out changes if necessary.
    Regards,
    Eli

  • Different GL needs to pickup when we do PGI for specific Customers

    Hi Team,
    our client is looking for scenario as below.
    when we do the PGI system will pickup the GL's from the OBYC settings based on the condition.
    i.e  COGS 123 a/c DR
             inventory A/c
    for all scenarios.
    now client is expecting when i creat SO for specific customer and if i do PGI system should pick  different COGS a/c not 123 considering above example.
    please help me out is there any exit or badi or enhancement spot for this.
    Regards,
    Raman

    Hi Subho da
    We cant change transaction type based on Customer
    One option is to create a Z movement type and assign a new modifier in OMJJ instead of VAX
    Usually, PGI is done from 601 movement type which triggers GBB VAX
    Create a Copy of 601 and change VAX to ZVX and assign another GL in GBB ZVX in OBYC
    Br. Ajay M

Maybe you are looking for