Temporal Compression Error on DVCPRO-HD720 files transferred from HVX200

DVCPROHD 720/60 transfer from HVX200/FireStore (have read other user having same problem from P2 card) still not working properly in FCP6 on Mac Pro. Files will function normally except when trying to FRC or conform -- they are incorrectly flagged as having "temporal compression."
All software is up-to-date: FCP 6.0.3, QT 7.5, OS 10.5.3.
Work around is to load on PBook G5 with FCP 5.1.4, then transfer files to Mac Pro, but the file/computer shuffling is getting old.
Earlier thread here at Apple forums:
"DVCPRO HD Frame rate converter not working"
http://discussions.apple.com/message.jspa?messageID=7250567
Also at DVX User:
http://www.dvxuser.com/V6/showthread.php?t=132705
Can anyone else confirm that they do (or do not) have this issue?
Thanks -- Hans

Shane Ross wrote:
Is this your issue?
http://support.apple.com/kb/TS1664
Looks like it might address the problem, but I in fact did upgrade to QT 7.5 this afternoon, and had hoped it might help. I transferred some 720/60 files this evening, and they were still marked as having 'temporal compression' (visible in file analysis in Cinema Tools), and the conform button was greyed out.
I wish the support article had more detail about the specific problem with DVCPRO HD and QT 7.4.5.
Plus, the files were loading correctly in FCP 5.1.4, with QT 7.4.5, so whatever's going on isn't connected completely (or at all) with 7.4.5.

Similar Messages

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

Music file transfered from PC does not appear in t...

Some of my music files transfered from PC does not appear in the music player in the cellphone but they appear as rigntone..NOKIA N81
How will i resolve it??
Can someone help me?
Please reply, it's urgent.

Hi Irosenth
Thanks for the answer. I am not sure I understand your question though.
We have a collection of reader enabled pdfs that the user can open in a webbrowsercomponent in a .Net winform.
We used to (Reader 9.4 and before) replace the Readers "save pdf" button with our own "save pdf" button that
- saves the pdf
- exports its data as xml
- send a message to the .Net winform that the pdf has been saved.
We implemented our own save button and its functions using a plug-in.
Now I can't find our "save pdf" button in Reader X. That is my problem.
So I try to create a new toolbar and place our "save pdf" on this new toolbar as you adviced me.
I expect the toolbar to show up in the Tools pane in the webbrowser component in Reader X.
But it doesn't. There is no Tools pane when I open the PDF in the webbrowser.
(btw all the keyboard shortcuts we have created in the plugin (ie CTRL, ALT, L) works fine - so the plugin generally works).
When I couldn't find my toolbar with its button in the webrowser, I tried to open one of the reader enabled pdfs in the Reader X as a standalone application.
This was just as a test to see if it worked any different from the browser plugin. It is not part of our use case.
But I noticed that in the standalone Reader X I do have a Tools pane, and my new toolbar but no "save pdf" button.
This is how it looked with Reader 9.4 and before:
OK the red text in the screenshot is quite difficult to read. It says (from above)
"We have replaced the Readers save button with our own save button in the plugin.
This is the (selvcreated save) button I miss in Reader X"
"This is a Reader enabled PDF shown in a webbrowser component in a .Net Winform"
"The users only have the Reader, not Acrobat"
Best regards
Jan
Message was edited by: Dafolo_Jan

I cannot Open EXCEL files transferred from my old HP laptop.

I am unable to open EXCEL files transferred from my HP LapTop. How to resolve?

The forum for MBP:
MacBook Pro
As for Excel, checked microsoft office community?
Maybe if you try export first....?
Vista has its own ownership permission flags. Maybe if you modify the file or a copy first, and then copy.

HT201240 Hijust bought my brand new mac computer had all my files transferred from my old pc onto the new one and turn it on and it has a password to enter and get started i have tried my apple id password and another the store had written apple default

Hi
Just bought my brand new mac had all my files transferred from my old pc and now i try to start and it has a password that i cant get past
i have tried my apple password and another the dick smith store had on a piece of paper nothing works and the store isnt open easter sunday
can anyone help
Marj

Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

HT4796 I cannot open any files transferred from the PC to my MAC as I am "not authorized". How can I correct this?

I cannot open any files transferred from my Windows PC to my Mac as I am "not authorized". How can I correct this?

Select the folderr containing all of those files, CMD+I, click on the lock, enter your admin password, add yourself with read & write, and click on the action button and select apply to enclosed items. That should do the trick. BTW, I don't have a PC, so i've not transfered any such files to my machine.

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip

The Domains.site2 file transferred from another mac won't open in iweb

Just transfered a Domains.site2 file from one mac to another in the applications support/iweb folder. But when I open iweb I get the error: can't read Domains.site2 file. Any thoughts on why this might be? It's a large file - over 2 gigs, transferred from an iMac running OX 10.5 to a macbook running OX 10.6
Thanks!

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Error while opening PDF file downloaded from database Blob column

Hi All,
I am working on jdev 11.1.1.4.0.
In my use-case I am using filedownload Actionlistner on a link to get the PDF file stored in the database in blob field. These files are being uploaded from other use-case in adf only.
After getting the dialog box to open/save/cancel for the PDF file when i click on open then i am getting an error *'Adobe Reader could not open 'abc.pdf' because it is either not a supported file type*
or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly docoded)' for some files , and to my surprise I am able to open some files.
When I open these PDF files separately from desktop I am able to view the content of each and every file in adobe reader.
I dont know where the problem exactly lies , while uploading/downloading the file . Any ideas/thoughts to resolve this issue?
Thanks
Kanika

Thanks a lot Timo...!!!
I checked the PDF file downloaded directly from the blob column in DB, there only it is corrupted so must be the problem in uploading the file. I am checking the code line by line,, but no problem in setting the file content type,size etc.
Here is the code snippet ..
byte[] buff;
buff = new byte[(int)length]; -- Length is the file size
int bytesRead = is.read(buff);
for (int i = 0; bytesRead < buff.length; i++) {
// int b = is.read();
int b = is.read();
if (b == -1)
break;
buff[i] = (byte)b;
BlobDomain blobDomian = new BlobDomain((buff));
TestVORow = (TestVORow Impl)TestVO.createRow();
if(blobDomian != null) {
TestVORow.setAttachment(blobDomian);
am.getTransaction().commit();
This seems to be Ok to me..the same issue, file is still corrupting.
Any thoughts from your side ???
Thanks
Kanika
The problem is resolved.
Changes made are instead of
InputStream is;
used ... BufferedInputStream bis ;
and after
for (int i = 0; bytesRead < buff.length; i++) {
// int b = bis.read();
int b = bis.read();
if (b == -1)
break;
buff[i] = (byte)b;
bis.close(); // use this close bufferedInput Stream.
Able to open each and every file now..Thanks for your suggestions Timo and Frank.
Edited by: Kanika on Mar 6, 2012 3:15 AM

Why cant I delete some Folders / Files transfered from external HD? to!

I am trying to figure out why I cant delete some folders / files, that I transfered from an external HD to my Macbook!
Some of these folder / files are text, video, and pic's based. Surely, going through those video / pics / text files, those I dont need anymore I would like to delete. Some of these appear to be deleted (in trash). But few days later I do realize, that they were not delete, or only few of the deleted files were properly deleted!
Why is this, this way - and how can I solve this issues! I just want to delete stuff either in form of folders or files, that I dont need anymore!

How are you trying to transfer them? What kind of external device?
~Lyssa

File transfers from iMac to Windows Share on another computer. Very slow!

Hopefully someone has some ideas on how best to troubleshoot this.
I have an iMac and a Windows 2003 File Server.
The iMac sits on a gigabit switch with another computer, an XP machine and the 2003 File Server sits on another gigabit switch.
The problem I'm having is that transfers from the iMac to the 2003 File Server are very slow whereas from the XP machine on the same switch they are fast.
Any ideas on how to test this or how I might fix the problem?
The Network interface itself is set to:
1000baseT
full-duplex
MTU: standard (1500)
I've tried it with both full-duplex and full-duplex (flow control).
The directory I'm transfering is a 7.56gb directory and it's taking over an hour to transfer.
Thanks
Josh

This doesn't quite work at all. I can understand for OSX to be serving the files the need too change /etc/smb.conf, however, my OSX machine doesn't serve any files, thus the smb service is offline. I have tried adding that tag to my fileserver using samba (its a linux nas box) and it still is slow as ****. I know it works with tiger because one of my sisters is using a macbook on tiger and is able to connect wirelesssly to it and download files as fast as my MBP downloads through ethernet (mine is leopard). My other sister has the exact same configuratino of macbook, however hers is leopard like mine and it moves crazy slow. I know this is the reason why apple pedaled back about network drive time machine because they realized the broke something so I'm giving them the beneffit of the dooubt. If 10.5.2 rolls around and I don't see improvement I think i'll just go back to tiger...

Easier file transfers from PC to Mac with Bluetooth

After trying in vain to get a network connection between my PC and Mac (lots of problems I don't need to get into), I realized I could use a spare DLink Bluetooth adapter on my PC to connect to my bluetooth-enabled MacBook Pro.
I am now able to send files back and forth between the computers, but it's a tedious process.
Is there anyway with Bluetooth to create a shared visible folder on one of the computers and to do file transfers by dragging and dropping?

Hello, How are you? I am soooo stressed and need some help. I have read all kinds of topics on how to tranfer files from a pc to a mac but it is not working for me. i am trying to avoid buring 2000 disks. i have a lot of files that need to be transfered and i am having difficulty. i am tryin to transfer the files via ethernet cable. the problem is me setting up the network. i could really use some assistance. i dont have a brand of pc since it was put together by a freind. it is on a windows xp interface. could you send me some help please? i have also called mac twice and they told me to try this. thanks, Lila!!!

Files transferred from old iMac to new iMac, permission/editing problems

I recently purchased a new iMac this month because my old one was no longer working, I can't keep it on for more than 2 minutes.
I always used Time Machine to back up my files, when I transferred all my files to my new iMac I was given alot of trouble with the permissions problem. I got the files to open by copying the folders to the desktop but, for example, all my iTunes music cannot be edited. I get alot of error messages about not being able to save iTunes library because I don't have write permissions.
How do I authenticate the files/folders so I don't have this problem?
Old iMac was purchased in Dec 2007, it has Leopard OS.
Message was edited by: Mark Rowan

If you want your new computer to be very much like your old, during the startup you would choose to migrate before choosing to create a new user. Then, the migration assistant creates the same user on the new computer. Did you do that?
Or did you do this:
If you first create a new user with the same name as the old one you want to migrate, Migration Assistant won't let you migrate as that username since it already exists.
You could create a new user that you will later use as an admin/test account. Then, while logged into the new account, delete the old account and use the Migration Assistant in the Utilities folder to Migrate from your Time Machine backup--it should create a new user with the old user info.
However, if you didn't get any errors from Migration Assistant, I'm not sure why the file permissions are askew.

Error while deploying ear file generated from weblogic to ocj4

Hi All,
I have an .ear file which has been generated from weblogic server.I tried to deploy it on ocj4 aby created a new project in eclipse and deploying it on ocj4.
When I try to run my project it gives me an error:
2008-12-15 19:13:54.811 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page : Exception:oracle.classloader.util.AnnotatedLinkageError: duplicate class definition: javax/xml/rpc/Service
     Invalid class: javax.xml.rpc.Service
     Loader: Test.web.TSOptyQGateWeb:0.0.0
     Code-Source: /C:/OC4J_10.1.3.4/j2ee/home/applications/Test/TSOptyQGateWeb/WEB-INF/lib/jaxrpc.jar
     Configuration: WEB-INF/lib/ directory in C:\OC4J_10.1.3.4\j2ee\home\applications\Test\TSOptyQGateWeb\WEB-INF\lib
     Dependent class: oracle.jsp.runtimev2.JspPageInstFacade$DeclaredAction
     Loader: oc4j:10.1.3
     Code-Source: /C:/OC4J_10.1.3.4/j2ee/home/lib/ojsp.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\OC4J_10.1.3.4\j2ee\home\oc4j.jar
     The original class instance was defined in the shared-library oracle.ws.jaxrpc:1.1, and oc4j:10.1.3 does import that loader. This may be a search-order problem.
Can anyone help??

Hi,
I checked the log-files, but there are no helpful informations, but:
07/04/23 12:08:04 - Start updating EAR file...
07/04/23 12:08:04 - start-up mode is lazy
07/04/23 12:08:20 - com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file Docsndownloads.war
                     com.sap.engine.services.deploy.ear.exceptions.BaseIOException: Error during replacement of substitution values. Reason:
                      java.io.IOException: Stream closed
and
Apr 23, 2007 12:08:20... Error: Aborted: development component 'Dokusunddownloads'/'sap.com'/'localhost'/'2007.04.23.12.07.47'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file Docsndownloads.war
com.sap.engine.services.deploy.ear.exceptions.BaseIOException: Error during replacement of substitution values. Reason:
java.io.IOException: Stream closed
thanks,
Lu

How do I get QuickTime .mov files transferred from my Mac onto my PC to play?

I recently transferred a bunch of QuickTime videos from my Mac to my PC using an external hard drive. When I tried to open to files on my PC, the files were recognized as QuickTime files but they would not play. It said the files were of a type that quicktime does not understand. Do I need some sort of Mac to PC file converter?

Maybe this article will help.

Temporal Compression Error on DVCPRO-HD720 files transferred from HVX200

Similar Messages

Maybe you are looking for