Temporary fix for me - Reset Network Settings

Went to the genius bar with my 3G issue yesterday. Reception was impeccable at the store. Guy suggested I reset network settings when it acts up. That has worked for me today BUT I cannot imagine having to do that ALL OF THE TIME.
It annoys me that there is no real discussion about this issue from Apple or AT&T. I'll hang tight until the next software/firmware update but I'm going to harass AT&T for a credit. IT NEVER WORKS.
And don't tell me I'm a baby for complaining about it. The biggest advantage (and most publicized reason) for upgrading DOESN'T WORK.

Connecting to data (especially 3g) has been a problem for me since installing 2.02. I'm anxious awaiting 2.03 (or 2.1, whichever comes first
I had been shutting off the phone to trigger it to connect to the network. Then, I read a tip shared here about turning airplane mode on/off. That's worked pretty well for me as a temporary workaround.
Agree with you, though. It can get pretty frustrating.

Similar Messages

  • 3G Temp Fix for ATT - Reset Network Settings

    Hey all, I've been just as frustrated with you about this 3.0 and 3.1 upgrade mess. My phone has actually been on the fritz since 3.0.1, very laggy and sporadic connection, and 3.1 has crippled my phone further. Kinda weird to have the one device you know will always work (Apple product) become less reliable than the most annoying phone I've ever owned (Palm, WinMo OS).
    Anyway, I was just screwing around at work, and since I don't have iTunes on my corporate workstation, I figured I was going to either make my phone work or toss it out the 22nd story window onto Fountain Square. I figured this quick fix out, which admittedly, may not work for everyone:
    Simply go reset your Network Settings. It's an option in the Settings>General>Reset menu.
    It's either because the Network Settings sucked, or because I rebooted my phone in the process, but I've had a few hours of pretty good operation, which hasn't happened since I put 3.1 on it, regardless of how many soft or hard resets I've tried.
    Good Luck!

    Connecting to data (especially 3g) has been a problem for me since installing 2.02. I'm anxious awaiting 2.03 (or 2.1, whichever comes first
    I had been shutting off the phone to trigger it to connect to the network. Then, I read a tip shared here about turning airplane mode on/off. That's worked pretty well for me as a temporary workaround.
    Agree with you, though. It can get pretty frustrating.

  • My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

    I have an ipad4.  Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

    Hi CollinGCC78,
    It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
    iOS: Troubleshooting Wi-Fi networks and connections
    Regards,
    - Brenden

  • I started getting a Timed Out error message on my iPhone 5 when browsing the web that reads Page could not be loaded.  Connection timed out.  I performed a Reset Network Settings and still get the error.  What is the fix?

    I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded.  Connection timed out.  I performed a Reset Network Settings and am still getting the error message.  What is the fix?

    Thanks so much for more direction. 
    I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec.  I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7.  Today Apple released v. 11 of iTunes which I was instructed to download.  It's TOTALLY different from iTunes 10.7 - drastically different in fact. 
    The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK.  With v. 11 of iTunes I can't even find the restore option!!!  The phone Rep will have to help me navigate v. 11 of iTunes.  It doesn't seem intuitive at all.  Maybe it's just me?!?!
    Thank you for sending this new link for firmware.  It's not clear to me right now whether I'll need it or not.  The phone Rep will probably somehow be able to resolve the problem.  If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty.  I will give another update as to what transpires as a result of the phone call with the Apple Rep.
    Again, thank you so much for helping me. 

  • No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

    No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on.  I can hear tones when I go to change them. I can hear my music.  I can hear talking on videos I have taken.  I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

    This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
    When I put it in speaker phone I can hear but not voices through the phone.

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Hi guys, my iPhone 4S (ios 7.0.2) can't connect wi-fi. I've already reseted Network Settings, but Wi-fi still doesn't work. how can I fix it? thank you!

    hi guys, my iPhone 4S (ios 7.0.2) can't connect wi-fi. I've already reseted Network Settings, but Wi-fi still doesn't work. how can I fix it? thank you!

    Thank you!
    doesn't like one at Starbucks or McDonald's...
    I can not activate or deactivate the Wi-fi button ... I don't know how I can explain... the wi-fi is always OFF.
    I've reset the network settings and restored by itunes... but I'm still without wi-fi ...

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1559 I have an iPhone 4s, after updating the phone to ISP 6 my wifi on/off is a dim grey colour and I can not switch on wifi, I have tried restor, reset network settings and updated to ISP 6.0.1 wifi will not work. This is VRF frustrating can anyone hel

    Since updating my iPhone 4s to ISo 6 my wifi setting is a pale grey and can not be turned on. Have tried restore, reset network settings and updated to ISP 6.0.1, anyone have any suggestions as this is really frustrating.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • "Network service error" game apps that require internet connection working fine, internet signal strong. Safari working, but YouTube, Facebook, Twitter and App Store won't work?! Tried resetting network settings but problem persists?

    Safari working fine, as are game apps that require internet connection.
    I can not get AppStore, YouTube app, Facebook app or twitter app to load anything as 'network service error" comes up.
    I have the latest update 7.2 and have tried resetting network settings, anyone else have this problem?! How do I fix it?

    I did try that one. But for some reason it still does not help. The strange thing stays that I can acces Twitter and other Apps. But still nos Safari/App Store. Only when I am on Wi-Fi.

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset.  What am I missing?

    Call your phone carrier - that's a problem for them to resolve.

  • Why do I have to keep Resetting Network Settings

    Hi All,
    Hopefully someone can help. Every time I need to access emails when I'm out this iPhone fails me.  Today, I tried to access an email from a client which consisted of 2 words "That's fine".  The wheel thing spun round, and round, and round, and round....  6 minutes later it displayed "this has not been downloaded from the server".
    I tried in vain to re-load but nothing. The only thing that seems to work is to "reset network settings".
    This then means that my wifi settings at home now need re-inputting, as do the wi-fi settings  at 3 of my other workplaces.
    If I could, I would swap this for a Samsung or something.  It's a constant source of frustration and embarrassment ( when I'm with clients)
    I've had the **** thing replaced at the Apple store and I have phoned my mobile supplier t-mobile/EE ( don't get me started on them...) about 20 times and no-one can make this problem go away. I hate this iPhone.
    Can anyone here help me?
    Many thanks
    Granger

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • TS3798 Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

    Have 2 ipads setup the same but 1 no longer connects to the network. Have reset network settings and tried to reconnect but no luck. Any advice?

    Have you tried rebooting your wireless router by removing power from it for about 30 seconds, then powering it back up?

Maybe you are looking for

  • Object lock for table T001B / view V_T001B (tcode OB52)

    Hi, The table T001B or view V_T001B is for Opening and Closing FI periods. We have given the transaction to Business users who are located in various parts of the world. During month end each user is trying to open the period for his company. However

  • Process order integration

    Hi all, I have an integration model for planned orders and process orders. Integration works without any errors. Changes in planned orders in both R/3 and APO are transferred immediately. But changes in process orders in APO are not transferred. (Cha

  • I need Help please with OS X

    I have a new MBP with Mavericks 10.9 and a 250GB SSD. i am new to Mac and like and idoit I tried to change the name of my hard drive in Macintosh HD.  I then changed it back to original name. When starting it up again I got the disc utlity repair as

  • Please help with report format

    Hi, When i am queryiing my table the result is like select * from general; MONTH    REGISTERD   ACCEPTED   REJECTED 2012-04        120             80               40 2012-05          80             40               40 2012-05         60            

  • TDMS read error-getd​atatype

    Brief background on my project.  I have a PXI system setup to read signals from DSA devices, S-Series, and an Encoder.  I am using matlab to make function calls to the NI Libraries in DAQmx, and nilibddc.h.  I collect data and stream data to disk wit