Temporary profile created in server 2012

Hi Expert,
I have a domain joined 2012 server, when I am trying to login to that server it says "you cannot access your files as it is a temporary profile".. I rebooted the server and perform this steps
http://www.c-sharpcorner.com/UploadFile/shyjumohan/fix-corrupt-user-profile-temp-profile-in-windows-server-20/
but no luck, could you please guide me on that, even when I am trying to login with local admin user it says the same thing.
Swaprakash..

Hi,
Thanks for your comment.
In respect to your error ID it seems that you are facing user profile logon issue. You can go through beneath article for more troubleshooting steps.
1. You receive a "The User Profile Service failed the logon” error message
2. User Profile not loading and Event IDs 1530, 1533 and 1534 being logged in the Application Event Log
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

What share/ntfs permission i've to setup for user profile disks on Server 2012 R2?

Please, let me know.
Regards!
Lasandro Lopez

Hi Lasandro,
As far as I know, share permissions for UPD are automatically set up by the management tools.
Besides, regarding how to install and configure UPD, the following article can be referred to as reference.
Installing and Configuring User Profile Disks (UPD) in Windows Server 2012
https://social.technet.microsoft.com/wiki/contents/articles/15304.installing-and-configuring-user-profile-disks-upd-in-windows-server-2012.aspx
In addition, regarding UPD, the following article can be referred to for more information.
Easier User Data Management with User Profile Disks in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/11/13/easier-user-data-management-with-user-profile-disks-in-windows-server-2012.aspx
Best regards,
Frank Shen

Consistent Profile for Windows Server 2012 R2 RDP Users

Here is the info I used for customizing my start screens.
http://microsoftplatform.blogspot.com/2012/11/predefining-and-customizing-modern-ui.html
As for desktop shortcuts and other customization. Look into Group policy preferences. You can add desktop shortcuts, map drives and customize a large amount of user settings.

I am playing with the Parallels 2X RAS product and want to set up a Terminal Server desktop and publish it for my users. I want the user experience to be uniform for all users that log on. For instance, I want default shortcuts to installed apps, desktop wallpaper, Documents, Pictures and Downloads pointing to their H drives (which is the home directory user share on the file server) and stuff like that. This is a Windows Server 2012 R2 server. In the olden days I would just customize a profile and then copy it over to the default profile but I have read that this is a bad idea. What's the best way to accomplish this? I don't want/need roaming profiles so I'm not sure where to go next. I am using group policy to tighten down the desktop quite a bit but I'm not sure how to complete the rest of my goals with a group policy.Thanks for...
This topic first appeared in the Spiceworks Community

SQL Server 2012 is prompting wrong message while creating new instance.

Summary:
While performing two task simultaneously 1) deleting existing SQL Server 2008 r2 instance 2) Creating SQL Server 2012 Instance. I received wrong message.
Explanation:
I have SQL Server 2012 setup in my server. By mistake I created SQL Server 2008 r2 instance.
Now simultaneously I was performing two task 1) deleting SQL Server 2008 r2 instance 2) Creating SQL Server 2012 Instance.
While creating SQL Server 2012 instance i received popup message "Another SQL Server 2012 setup is running but the running setup was not SQL Server 2012, it was SQL Server 2008 r2.

Hello,
You should not run two SQL Server setups at the same time. In fact, SQL Server has a rule to verify there is no pending restart because of an installation/uninstallation in progress.
Please cancel the installation of SQL Server and continue uninstalling the SQL Server 2008 R2 instance.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installing Windows Server 2012 in Order to Use SharePoint Server and Develop in VS2012

Hi.
I need to install SharePoint Server so that I can work with SP Designer and have full options for development using VS2012. Apparently, I also need to Install Windows Server 2012. I would like to install and configure WS2012 in a virtual environment
using the Hyper-V tools that come with Windows 8 Pro. I'm a newbie when it comes to WS2012, and want to make sure I don't end up reformatting my Windows 8 hard drive or causing a similar event that would put me in a rubber room.
I downloaded the WS2012 image file, but am unsure how to proceed. Can anyone give me some help as to how to get started?
Thanks.
Bugless

Hi,
If you have enabled the Hyper-V role on Windows 8 then you can create Windows Server 2012 VM's. As Server 2012 has the Hyper-V tools build in by default there is no need to install them.
So enable the Hyper-V role on Windows, Create a new VM in Hyper-V management console and connect the cd/dvd drive in the VM properties to the Windows Server 2012 setup ISO file. Start the VM and the Server 2012 setup. (during creating a VM you can also
connect the cd/dvd drive to an ISO file)
You might want to give to the Server 2012 VM 2 vCPU's and 2GB+ memory for performance. Also have a look the memory specs for VS2012 to see how much memory you should give to the VM.
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam

Logon with temporary profile

Dear Sir/Mam,
we are using the domain environment at our office area and facing the Temporary profile log in when we delete old user profile and create new user profile on windows 7.
We have try to this again and again but found the same issue on another system.
Due to some problem in user profile we have delete the user profile & trying to recreate the domain user profile on windows 7 but we found the massage in taskbar like Temporary Profile created on system. Also we are not getting the user profile in C
drive.
Kindly help me to solve the issue without re-install the windows.

Perhaps the origin of problem may be in your W 7 system preparation. Windows 7 behaves differently than Windows XP and it is important to create default profile correctly. You should create it with sysprep and include copyprofile parameter.
Local temporary profile may stem from not correctly set permissions. Make sure that you have set permissions correctly.
Rgds
Milos

Server 2012 R2 RDS, User Profile Disks are created but local profiles are created as well. The UPDs aren't mounting correctly.

2012 R2 RDS Deployment with RDCB HA and UPDs enabled. Everything was working fine with no issues until users started getting temporary profiles. Around the same time UPDs were being created but at the same time a user profile was created in C:\Users.
I actually rebuilt the entire RDS configuration except the SQL Server. It took about 5 hours and was not that big a deal but.... we still have the same issue!
Does anybody have the solution for this?

Hi,
In most cases, the issue is caused by locked UPD. And the workaround is to log off the user. Please check if it is the case.
For example:
RDS user profile disks - getting error temporary profile are being used as UPD are not accessible
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0d4b66fc-b53f-435e-b036-142b6ed15d0b/rds-user-profile-disks-getting-error-temporary-profile-are-being-used-as-upd-are-not-accesible?forum=winserverTS
Also, please check if you will get the temporary profile when logging on with a local account of the session host server.
If issue persists, please check if there is any related error in Event Viewer and provide us for further research.
Hope this helps.
Jeremy Wu
TechNet Community Support

APP-V 5.0 VDI A Temporary Profile is created when I log into the Virtual Desktop

Dear Sirs
I'm Enzo , an Italian System Engineer. Together with other fellows we created a test environment :
- a VDI machine (POC-VDI,10.102.94.219, Windows Server 2012 R2) with
RD Web Access, RD Connection Broker, RD Virtualization Host, RD Session Host Installed
The Hyper-V Environment includes :
- DHCP Server (to provide addresses to Virtual Desktop Collections)
- APP-V_5.0_Server , Application Virtualization Management Console 5.0, with 2 published packages (Office 2010 and Open    Office 4)
- Sequencer_W8-1, Application Virtualization Sequencer 5.0
- Client_8-1 , Client Windows 8.1 with Application Virtualization Client 5.0
From the Client_8-1 we can download and run the two published packages from the server (user VDI_TEST_1)
The Client_8-1 has been used as the template (sysprep /oobe /generalize /shutdown) for the Virtual Dektop (APP-0 and APP-1)
included in the collection 'APPV' (Pooled, Automatically Manage Virtual Desktop, Roll Back Virtual Desktops Enabled).
I connect to the 'RD Web Access' ( http 10.102.94.219 RDWeb, user VDI_TEST_1) , I then connect to APPV collection .
When I get logged into the Virtual Desktop (APP-0 or APP-1, user VDI_TEST_1), a Temporary Profile is created. Why ?
We configured :
User Profile Disk : share Location 10.102.94.219 UPD
   UPD : Share      Everyone Full Control
                              Security   SYSTEM    Full Control
                                         Network Service
Full Control
                                       POC-VDI$   Full
Control
                                         Administrators (POC-VDI\Aministrators)
Full Control
                                         Users (POC-VDI\Users)
Read & Execute
I am puzzled as long as when I get logged into the Virtual Desktop, a Temporary Profile is created. Why ?
Thanks in advance for your kind attention
Enzo

Highly unlikely it has anything to do with App-V.
Start troubleshooting by looking at permissions on shares and folder under the shares for the profile.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books )

User profile images not persisting after log off on Server 2012 R2 RDS Session Hosts

Hi,
We have a 2012 R2 remote desktop deployment, with two session collections, a gateway server, and connection broker.
We have set these session collections to use centralised user profile disks.
What I am having an issue with, is that when a user sets their profile image through the server they have logged on to (I have the desktop experience pack installed so they are able to do this), they can see the user tile has been set with that image in
settings and also on the start menu, but as soon as they log off the server and back on, their profile image has been reset to the default blank image.
I have checked all of my group policy options, and cannot find any settings that could be impacting this.
Does anyone have any ideas why these images are not persisting for users or admins?
Thanks, Eds

Please check that the user is not getting a temporary profile each time he logs in. Also, make sure that the RDP client is properly configured to display the Wallpaper: http://www.webapper.com/blog/index.php/2007/10/18/enabling-desktop-wallpaper-on-remote-desktop-terminal-services/
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

2012 R2 RDS Temporary Profile issue

I am having the same issue: I have a new Windows 2012 R2 server running AD and RDP. Everything was working great until I rebooted yesterday, and now when I log in at the server, it logs me in as an RDP user and a temporary profile. My
external RDP users log in just fine, and their profiles are okay. What is Microsoft doing about getting a fix for this?

I have done the registry fix on your link: http://support.microsoft.com/default.aspx?kbid=947242 IT DOES NOT fix this issue on my Windows Server 2012 R2. I STILL get a temporary login. Even if I create another admin user with local
rights and domain rights, and log in at the console, it will log in the first time and create my profile, but after I log off that user, and try to log back in, I get a temp profile.
ALSO, please note that in addition to the temp login, the 2nd issue is that I am being logged in as an RDP login account (in fact, when I look at the RDP connections in my Collections list, one of them is me), while I am, in fact, logging at the console.
Microsoft needs to come out with a hotfix on this. There are many posts of frustrated users with the same issue on a Windows 2012 R2 server running RDP.
Ginny Jost

Server 2012 RDS - User Profile Disks

Hello,
I'm implementing Server 2012 RDS session-based.
Can I increase the limit of User Profile Disk after it is initially set?
Is it ok that my Admin user has a User Profile Disk i.e. no local profile on the server as they did previously.
Are PSTs supported on User Profile Disks - previously PSTs were unsupported on network share - User Profile Disks are on network share.
I had an issue where a UPD was created for a user - I then delete the UPD. I then logged in as the user (a domain admin) and expected a local profile to be created - this didn't happen. A temporary profile was created instead. This was unexpected.

Hi Gary,
You can try to change the size of User Profile Disk by mounting .Vhdx file. Please refer below thread for information.
Resize User Profile Disks
As per my research, i can suggest you to use admin local user profile on server.You can get more information for UPD on below listed article.
1. Easier User Data Management with User Profile Disks in Windows Server 2012
2. Using User Profile Disks (UPD) in combination with predefining the Modern UI Start Screen on RDS 2012 (appsfolder.itemdata-ms)
Hope it helps!
Thanks,
Dharmesh

Use one profile for all user profiles in Server 2012 R2

Hi
I am setting up an Windows Server 2012 R2 Template on VMware.
I will do som changes with the local admin user, and want all user that will log in to servers made from this Template, get the user profile I have set up for the admin account.
How to I do that?
Regards
StigKSand

the way I used to do this was to create a new profile the way I wanted with any shortcuts applications etc installed. then I would create another user account on the PC and make it an admin.
reboot the pc to ensure it hasn't got the pre-configured profile loaded and login with your newly created admin account.
then right click This PC in windows explorer and select properties, then select advanced system settings, and select user profiles on the advanced tab. You can then select the profile you made all the configuration to, and click copy and then select default
profile.
this should then mean any new users who login get this default profile on this server.
hopefully that is what you were referring to.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP:                     10.0.0.80
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:        10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP:                     10.0.0.12
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:         10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
Jay

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Temporary profile created in server 2012

Similar Messages

Maybe you are looking for