Temporary Solution for screen flicker r9 280x

After performing various tests I've fixed the screen flickering on my msi r9 280x, I hope this can be useful for all here with the same problem and with different patterns of R9 family, that I have running on my pc and I have not had even the slightest flicker playing youtube videos where the problem became acute.
1 open the task manager and end the process Catalyst Control Center: Monitoring program and also the Catalyst Control Center: Host Application.
2 Go to C: \ Users \ XXX \ AppData \ Local \ ATI \ ACE right click on the Profiles file, in the end the general menu select Read only, accept.
3 Again right click and select edit, and file searches within these lines
<Feature name="CoreVoltageTarget_PCI_VEN_1002&DEV_6798&SUBSYS_27751462&REV_00_4&320ACFF0&0&0010A">
<Property name = "Want_0" value = "850" /> CHANGE THIS VALUE OF 850 FOR 900 only
<Property name = "Want_1" value = "1200" />
This value changes the low voltage in 2d (resting) 0.85va 0.90v
4 then go to the File menu, select Save As, in writing profiles.xml nombe save.
5 Again right click on the profiles file saved on the desktop and select read-only
6 Go back to Go to C: \ Users \ XXX \ AppData \ Local \ ATI \ ACE and remove the profiles file.
7 copy or cut and paste into C profiles saved file to your desktop: \ Users \ XXX \ AppData \ Local \ ATI \ ACE.
8 Finally go to task manager and then click on file to run new task, we write MOM.exe there and ready, restart the pc for security.
to ensure that its voltage is at 0.90v use GPUZ and check the end of the sensors tab.
note that if we use the application msi afterburner not enable Unofficial Overclocking mode option because in themselves to have it on and change the clocks video card testing restores the voltage 0.85V.
when I play some games I use msi afterburner like msi Gaming app since I have experienced that without the Gaming app clocks fall then at 300mhz after making this process voltage, I recommend you use to see, as an example in msi afterburner I apply the core clocks of vga 1100 and Gaming active app one of the two profiles, the Gaming mode or the mode Oc down and watches only parameters selecionados 1020 mhz or 1050 mhz vga respectively when accelerating up to 1100 mhz selected msi afterburner.
I hope this is useful that I share as many as we can not believe that to date no actions are taken to this problem taking into account the value of the video card. Maybe this and many what they knew, but there will be many who do not and those like me tried in many ways to carry it out and not succeeded because that's how I achieved step by step and fully functional, sorry if some way I can not explain to clearly as I do not speak English and I'm using a translator, and hopefully serve them again, I just do it to help them all and hopefully once and for all of the annoying screen flicker go ...

Ryan Dinan, "Importing Photoshop files into Illustrator CS3" #27, 22 Oct 2007 7:00 pm

Similar Messages

Temporary solution for PSDs and Illustrator 64 bit

I found a temporary solution to the problem of placing or opening PSDs on 64bit computers in Illustrator CS3 and CS4.
Right click the icon for Illustrator and select Properties /
Compatibility
Then select Run this program in compatibility mode for
Windows XP (Service Pack 2)
It doesn't affect the other programs - only temporarily changes the screen for Illustrator only.
I can now open and place layered PSDs directly into Illustrator again.
(Original reference http://radongas.blogspot.com/2008/09/adobe-illustrator-cs3-windows-vista-64.html )

Ryan Dinan, "Importing Photoshop files into Illustrator CS3" #27, 22 Oct 2007 7:00 pm

Temporary solution for DNG support under 10.5.5

Those of you who use DNG files (ie. because you are using different brand of camera's like I do) certainly have noticed that DNG became unsupported after their upgrade to MacOSX 10.5.5.
A temporary solution that worked for me can be found here:
http://chdk.setepontos.com/index.php/topic,2353.0.html
Hope Apple and the Aperture team will fix this problem asap.

So you need to turn on the bg mode(2.4GHz) or a mode(5.8GHz)! Try it.
do you have any detailed instruction of this?

A temporary solution for issue of excel sheet for SO_NEW_DOCUMENT_ATT_SEND_

Hi,
we all sometime or the other have faced the problem with SO_NEW_DOCUMENT_ATT_SEND_API1, it passes all the data into a single excel sheet. the following is the code i have written using the same standard FM to resolve the issue.
Problem's Facing     : To send the output of a report as mail attachment (Excel sheet) from SAP, to the User's outlook or TCP/IP
What is happening     : All the data which is being passed to the excel is being put in a single cell of the excel sheet.
Cause               : the difficulty lies in getting the internal table from SAP report, passing it to email Function Module If the structure of the internal Table is unknown .
Solution:
if the user while sending data to the Function module ( created using the following code) puts a '#' between field values, all the fields gets separated into individual cells and the data gets printed as required.
<b>advantages</b> of the following code are:
1) User just need to type userid or multiple userid's separated by comma.
2) Performs multiple tasks with one function module.
3) It can be used to send file with subject only
4) It can be used to send file with subject and body
5) It can be used to send file with subject, body, and attachment
6) Attachment can be of 'TXT' format or 'XLS' format depending upon the choice of the user.
7) User specific parameters for EMAILID, subject, body and attachment type avoiding the dump error of "Type conflict"
8) If the user requires to send output of a report as an excel file, then a single internal table will store the total output separating the field values by ' # ' and the data gets printed evenly. the ' # ' symbol is used as Tab delimiter.
FUNCTION zemail_attachment.
""Local Interface:
*" IMPORTING
*"     REFERENCE(EMAILID)
*"     REFERENCE(SUBJECT)
*"     REFERENCE(ATYPE)
*" TABLES
*"      ATTACH_FILE STRUCTURE SOLISTI1
*"      BODY OPTIONAL
*" EXCEPTIONS
*"      INCORRECT_PARAMETERS
This table requires information about how the data in the
tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are
to be distributed to the documents and its attachments.
DATA it_objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
This table must contain the summarized data dependent on each object type.
SAPscript objects store information here about forms and styles,
for example. Excel list viewer objects store the number of rows and columns
amongst other things and PC objects store their original file name.
DATA it_objhead LIKE solisti1   OCCURS 1 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as binary objects.
DATA   it_objbin TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as ASCII objects.
DATA it_objtxt LIKE solisti1   OCCURS 10 WITH HEADER LINE.
This table must contain the document recipients.
DATA it_reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE .
This structure must contain the attributes of the document to be sent.
DATA: doc_ching LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
Create the internal table for body , subject
DATA: it_body LIKE solisti1 OCCURS 10 WITH HEADER LINE.
*creation of internal table for Email-id.
DATA: BEGIN OF it_mailid OCCURS 0,
        email LIKE kna1-name1 ,
        END OF it_mailid.
*VARIABLES
DATA : v_hash(1) TYPE c VALUE '#'.
DATA: v_string1 LIKE kna1-name1,
        v_string2 LIKE kna1-name1,
        v_string3(12) TYPE c VALUE '@GMAIL.COM'.
*CONSATNTS
CONSTANTS: c_con_cret TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
             c_con_tab TYPE c VALUE cl_abap_char_utilities=>cr_lf,
             c_raw(3)   TYPE c VALUE 'RAW',
             c_comma(1) TYPE c VALUE ',',
             c_rec_type(1) TYPE c VALUE 'U',
             c_space(1)    TYPE c VALUE ''.
Move Body to Internal Table (body into it_body)
LOOP AT body .
    MOVE body TO it_body .
    APPEND it_body .
ENDLOOP.
doc_ching-obj_descr = subject.   "Subject of the Email
Move the Subject and Body to OBJTXT
it_objtxt[] = it_body[].
DESCRIBE TABLE it_objtxt LINES tab_lines.
READ TABLE it_objtxt INDEX tab_lines.
doc_ching-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_objtxt ).
CLEAR it_objpack-transf_bin.
it_objpack-head_start = 1.
it_objpack-head_num   = 0.
it_objpack-body_start = 1.
it_objpack-body_num   = tab_lines.
it_objpack-doc_type   = c_raw.
APPEND it_objpack.
Convert to Excel format
IF NOT attach_file[] IS INITIAL.
IF atype IS INITIAL.
RAISE INCORRECT_PARAMETERS.
ELSEIF atype = 'XLS' .
    LOOP AT attach_file .
      CONCATENATE attach_file v_hash INTO attach_file.
      REPLACE ALL OCCURRENCES OF v_hash IN attach_file WITH c_con_cret.
      IF sy-tabix = 1.
        MOVE attach_file TO it_objbin.
      ELSE.
        CONCATENATE c_con_tab attach_file INTO it_objbin.
      ENDIF.
      APPEND it_objbin.
    ENDLOOP.
ELSEIF atype = 'TXT' .
Convert to Text format
    LOOP AT attach_file .
      REPLACE ALL OCCURRENCES OF v_hash IN attach_file WITH c_con_cret.
      CONCATENATE attach_file c_con_tab INTO it_objbin .
      APPEND it_objbin .
    ENDLOOP.
ENDIF.
DESCRIBE TABLE it_objbin LINES tab_lines.
it_objhead = subject. APPEND it_objhead.
Creating the entry for the compressed attachment
it_objpack-transf_bin = 'X'.
it_objpack-head_start = 1.
it_objpack-head_num   = 1.
it_objpack-body_start = 1.
it_objpack-body_num   = tab_lines.
*check for XLS ,TXT files
IF atype = 'XLS'.
    it_objpack-doc_type   = atype.
ELSEIF atype = 'TXT'.
    it_objpack-doc_type   = c_raw.
ENDIF.
it_objpack-obj_name   = 'ATTACHMENT'.
it_objpack-obj_descr = 'ATTACHMENT'. "Attachment File Name
it_objpack-doc_size   = tab_lines * 255.
APPEND it_objpack..
ENDIF.
Entering names in the distribution list
Concatenating the email with '@GMAIL.COM if the user doesnot specify any mail extension
recipent type as U - for internet usage
SPLIT emailid AT c_comma INTO TABLE it_mailid.
APPEND it_mailid.
LOOP AT it_mailid.
    SHIFT it_mailid-email LEFT DELETING LEADING c_space.
    SPLIT it_mailid-email AT '@' INTO: v_string1 v_string2.
    IF v_string2 IS INITIAL AND NOT it_mailid-email IS INITIAL.
      CONCATENATE v_string1 v_string3 INTO it_reclist-receiver.
      it_reclist-rec_type = c_rec_type.
      APPEND it_reclist.
      CLEAR: v_string1,v_string2.
    ELSE.
      it_reclist-receiver = it_mailid-email.
      it_reclist-rec_type = c_rec_type.
      APPEND it_reclist.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_ching
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack
      object_header              = it_objhead
      contents_bin               = it_objbin
      contents_txt               = it_objtxt
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
ENDFUNCTION.
If anyone, has a better solution, please share
Cheers
Ajay

issue resolved

TEMPORARY SOLUTION FOR A7-30 A3300-GV/G/HV/H TOUCHSCREEN PROBLEM (DOWNGRADING/FLASHING FIRMWARE)

TURN OFF THE TABLET AND DO NOT YET CONNECT IT TO THE COMPUTER!
1. Download the official firmware depending on your device:
A3300-GV/G - A3300GV_A442_01_43_140826_ROW
A3300-HV/H - A3300HV_A442_01_19_140827_ROW
Click the download icon
2. Extract the downloaded RAR file
4. Don't use the SP Flash Tool and Drivers in the archive. Use the updated versions.
http://d-h.st/D0y
http://d-h.st/w6v
5. Extract them (unblock the archive - right click the file, then properties, then Unblock at the bottom)
6. Open the Drivers folder, then run Install.bat as admin
7. Wait for it to install (it takes some time)
To load the drivers, press the volume up button of your tab. (DO NOT RELEASE IT). Then connect your tablet to your PC. Wait for the computer to finish installing the drivers for your device. After installing, disconnect your tablet and if it is turned on, turn it off again.
8. After installation, run flash_tool.exe as admin from the SP Flash Tool folder.
9. On the Download Section, click on scatter loading
10. In the box, go to the folder of the firmware, open target_bin, then click MT6582_android_scatter.txt (Our processor is MT8382 but that's okay.)
11. Click the Download button (it doesn't require Internet)
12. After you press download, press the volume up button of your tablet, DO NOT RELEASE IT. Then connect your tab to your PC, you can release the volume up button ONCE SP FLASHTOOL HAS STARTED FLASHING YOUR DEVICE.
13. Flashing takes time, so wait for it. After flashing, disconnect your tab.
14. Clear your /data and /cache first. Boot to recovery (Power + button up button). Press power button again. Navigate by pressing down, and select by pressing up.
15. Choose factory reset, then yes.
16. Boot your tablet. (It takes some minutes.)
Solved!
Go to Solution.

Thank you !!! i Tried it and its a good sollution ! i enjoyed it

Temporary Solution for iPAd Connectivity Problem.

I have posted this a few times, because I was excited to find a quick way to reconnect my iPad to its network. Hope it works for you too.. Please reply if it works..
When your iPad displays the screen to re enter your network security key, do not enter the key, instead, press the iPad's power button until the iPad displays "Slide To Power Off". Then touch the "Cancel" button on the bottom of the screen, and the iPad will reconnect to your network. This is NOT a fix but a simple workaround until Apple finds a software fix.
Please respond to this thread if it works for you.
Remember this is only a workaround for iPads that disconnect from a network, asking to re enter its security key.

REMINDER,
This works but you Must Not enter the security key when asked to, AND you MUST hold in the Power Button until you get the "Slide To Power Off" screen. Simply "Cancel", and your iPad should continue to reconnect on its own.

Temporary Solution for endless connecting mail problem.

I've never really had problems connecting to my Gmail IMAP account. Just my 3 POP accounts. I found the setting on Gmail to check my three other POP accounts and put the messages in my Gmail IMAP inbox. Leave a copy of the original message on the server(s). No forwarding necessary.
I now use the iPhone to check only one account (Gmail), get all my mail from the other 3 accounts and am able to reply as if from the POP address. It's much quicker only checking one account, and this temp solution I may keep using even after a software/firmware upgrade.
Original messages left on the server(s) are available for download to my iMac when I get home from the road.
Hope this might be of some help.
CD3

Follow up to original post.
Your POP accounts will show up in Gmail IMAP and you can check each account manually, if you wish, thru Gmail and not have to connect to the POP servers.

Temporary solution for deleting text messages for the Droid X

For everyone trying to delete the message history:
I know this is a pain in the rear-end, but I found a way that works as a temporary fix.
~Write down the number of the contact you're trying to delete from the history (ex girl/boyfriend, secret lover, whom ever)
~Delete the contact
~Re-enter the contacts info
You'll notice the history for that contact is gone and even though this is a rather long route to take to delete the history it works.
Now lets just hope there's an update soon.

Runnman,
I am not sure you if you know this or not but the Droid X stores text messages as well as phone call histories in two locations. One location for your text messages is at the location where you would normally send or receive messages, you can reply to them and if you'd like you can delete the conversation as well as the trend, however, there is a catch. Even though you have deleted the trend or conversation, if you go to your contacts and swip your finger to the left or right (I can't recall which way but you'll know when you see your message history) you'll see all you text messages. It's this location where the messages and call history can not be deleted and the only way I have found and so far the only technique that actually works, is to delete the entire contact, once the contact is deleted you will no longer have the history listed. Then you can readd the contact and repeat the process until an update is provided. I hope this doesn't confuse you too much.
Cheers

Temporary solution for Facebook download

As many of you I have also been going thru the same problem as most of you ever since Facebook showed a new update. After deleting my Facebook app & not being able to reinstall it I changed my time zone to London & tried reinstalling the Facebook app. Surprisingly.. It worked! Now I have changed my time zone back to my own & it is working perfectly fine.. Try it! I hope this helps most of you out!:)

Thank you - good work! Don't know how you figured that out but it worked .

PERMANENT SOLUTION FOR A7-30 A3300 (ALL VARIANTS) TOUCHSCREEN ISSUE

I posted a temporary (semi-permanent, actually) solution before for this:TEMPORARY SOLUTION FOR A7-30 A3300-GV/G/HV/H TOUCHSCREEN PROBLEM (DOWNGRADING/FLASHING FIRMWARE) Since I think Lenovo will not be updating our device anymore, I think this solution will be the permanent way to fix the touchscreen problems. Sorry, I cannot put new screenshots, I am not using a PC... READ THE WHOLE GUIDE AND INSTRUCTIONS FIRST BEFORE TRYING, SO THAT YOU CAN FULLY UNDERSTAND ITTURN OFF THE TABLET AND DO NOT YET CONNECT IT TO THE COMPUTER! 1. You have to download two firmwares for your device:A3300-GV/G:A3300GV_A442_01_43_140826_ROW - This is the OLD firmware we will use to fix the problemA3300GV_A442_01_48_150325_ROW - This is the LATEST firmware that we will flash to our deviceA3300-HV/H:A3300HV_A442_01_19_140827_ROW - OLD firmwareA3300HV_A442_01_24_150319_ROW - LATEST FIRMWAREClick the Download icon 2. Extract the two downloaded RAR files in separate foldersUnblock them first 4. Don't use the included outdated SP Flash Tools and Drivers in the extracted folders (you can delete them). Download the latest versions here:SP Flash Tool for WindowsDriver_Auto_Installer_v1.1236.00_Win8.1.7zThe drivers are also compatible in others Windows OS versions 5. Unblock the archives first (right click one archive, select Properties,then click Unblock button at the bottom. If there's no unblock button, that means it's already unblocked) 6. Extract the archives 7. Open the Drivers folder, then right click Install.bat and choose Run as Administrator,A terminal window will open, follow it 7. Wait for it to installLoad the drivers, by pressing the volume UP of your tablet (DO NOT RELEASE IT). Then connect your tab to the PC. Wait for it to install the drivers. After installation, disconnect the tab, if it's turned ON, you have to turn it OFF. You can also press the reset button by using a pin. 8. Run the flash_tool.exe as admin in the SP Flash Tools folder 9. In the Download section, click on SCATTER LOADING 10. In the dialog box, open the folder of the LATEST firmware, open target_bin, and choose MT6582_android_scatter.txt 11. Click the DOWNLOAD button ( it doesn't require internet) 12. After you press Download, press (do NOT RELEASE) the volume UP button of your device, and connect it to the PC. You can release it AFTER SP Flash Tools started flashing the firmware to your tab (showing Flash _% in the progress bar) 13. After flashing, SP Flash Tool will show a check icon. Remove the device and press the reset button in the tab. (Step 7) 14. Do not close SP Flash Tool, and click SCATTER LOADING. 15. Open the folder of the OLD firmware, then target_bin, choose MT6582_android_scattet.txtMAKE SURE YOU ARE OPENING THE FOLDER OF THE OLD FIRMWARE 16. You can see in SP Flash Tool, there are checkboxes. Opposite the checkboxes are RECOVERY, SYSTEM, BOOT, UBOOT, ETC. Remove ALL checkboxes except BOOT (NOT UBOOT!) 17. Repeat steps 11, 12 and 13 18. Close SP Flash Tool and boot your tablet DONE

Hi,I had a problem with updating my Lenovo Tab2 A7-30 HC tablet. It was error and the tablet stoped on recovery menu.I found stock ROM in the internet, but it was fro A3300GV. So, when I flashed, the tablet had bricked.I can't do anything. The comuter not recognise the tablet.Can someone help me?

Any solution for having daily screen flicker on my 2.13GHz 13" 2011 Macbook Air (running 10.6.8)???

well, the title says it all...I see on the Macbook Pro support threads that this is a continuing issue for that model and people seem frustrated that repeated replacements of motherboard and/or displays are not solving the problem.
I can still use the computer but it is a little disconcerting to have the screen flicker and it seems to be happening almost daily now whereas it used to be more of an occasional thing...
I run Onyx and fix disk permissions and clean out various caches at least once a month...but other than that, I just use the computer for low-intensity tasks of word-processing and web browsing mostly...
just wondering what people have done with this problem?
Thanks,
Eric

I finally found a solution. In about:config, under browser.sessionhistory.max_entries, I changed 5 to 20. End of problem.

ISight Green Screen Problem: Temporary SOLUTION

If you have been experiencing a "green screen" with iSight in Photo Booth (and camera not working in other programs...there is a temporary solution.
The solution is to SHUT DOWN your machine (NOT just restart). Turn your machine back on....your iSight will start working agian. Now this may be extremely annoying but the best thing yo u can do is continue to harrass Apple until they release a software update for this problem.
Hope this information helps.

I have a NEW (refurbished) mac!If your Mac is VERY new, you can contact the retailer who sold it to you and ask them to fix it. This is particularly important if you have ANY other problems with your refurb'd unit.
If you want to try on your own first, here are some ideas you can pursue.
If you performed the update to 10.4.6, did you use the Combo Updater and a method like How I Update My Mac OS X? If not, applying the Combo with that technique may help you.
When you got your new Mac, did you erase the hard drive and reinstall the software before you started using it? Over the years, this has become part of my standard practice for assuring Macintosh System Stability.
Finally, in addition to Apple Article 302679, Apple Article 302520 also deals with green screen issues. You can check that.
Jim

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

Temporary Solution for screen flicker r9 280x

Similar Messages

Maybe you are looking for